Nokia video player CABAC Reference frames.

Hello. I have Nokia N8 with the latest Anna and all it's updates.
I'm trying to play some "mkv" files but I have some problems.
The current video player can play H264 (AVC) videos with CABAC support up to 5 Reference frames. If I try to play a video with more than 5 ref frames the player says the video is corrupted and only audio plays.
Is there a way to play these videos without converting and if not, it would be great if the player gets an update with better video support.

No, the only way to play videos with high CABAC reference frames is to convert the video. Actually, you will just need to lessen or turn off CABAC using a decent video convertor such as Super C video convertor.
http://www.erightsoft.com/SUPER.html
Ray.

Similar Messages

Nokia Multimedia Player does not show video in 3gp...

PC Suite 6.85.14.1 - latest Windows Vista When trying to play 3gp files recorded by Nokia N70, Nokia Multimedia Player only shows green video screen with moving vertical stripes, but not actual video image. Sound is played normally. I tried alternative player (VideoLAN VLC) and latter displays video without problems (unfortunately this player does not support 3gp sound so I would appreciate either correction of this problem or indication of good player supporting 3gp).

14-Dec-2007 10:25 AM
sidream wrote:
PC Suite 6.85.14.1 - latest Windows Vista When trying to play 3gp files recorded by Nokia N70, Nokia Multimedia Player only shows green video screen with moving vertical stripes, but not actual video image. Sound is played normally. I tried alternative player (VideoLAN VLC) and latter displays video without problems (unfortunately this player does not support 3gp sound so I would appreciate either correction of this problem or indication of good player supporting 3gp).

Can PQA use a single reference frame against a test video stream?

For R&D testing of video "set-top" devices I want to initiate some internal processing on our UUT, then using a PXI-1491 analyze the digital (HDMI) video output of the UUT for some large number of seconds (180 seconds or more for example).
The video that is being analyzed will have static image content. The amount of time I want to analyze the test stream after doing some stuff on the UUT is variable, but I always anticipate it being fairly long.
It currently appears that I have to have a reference stream that contains exactly the same number of frames as the test stream.
This makes the reference vbf files very large. My test requirements include a large number of resolutions that must be tested through the UUT. Having an extensive library of very large vbf files is logistically difficult, it would much easier to maintain such a library made up of single "golden" frame reference files instead. Additionally, since my analyze time needs to be variable depending on test setup and UUT processing options, it would be better for me to have a single golden reference frame and validate alot of test frames against it.
Since the analyzed video will have static images, is it possible to run a test video stream against a single reference frame (reduced reference) instead of having a full reference stream frame by frame?
Solved!
Go to Solution.

Doing exactly what you are asking is not within the design of PQA. Of course, the best option that we would recommend when working with video test is a large capacity hard drive, probably in a RAID configuration for more space and better performance, and then just taking a golden reference with 10k frames, and doing what you originally suggested.
One method of achieving what you are looking for without using a large reference file is through offline processing. This would allow you to acquire 10,000 consecutive frames, which I understand is one of your concerns, and then after the fact run them back through the analyzer. You would still be performing a looping type of action in TestStand or LabVIEW. The process would be:
1) Acquire your source from your 1491 provider with no processors, and saving the media stream to disk.
Loop:
2) Load PQA with the disk buffer provider instead of the 1491, the disk buffer file will be the acquisition from above
3) Point the start frame to your current location.
4) Perform your processor with the results.
5) Repeat and iterate to a new start frame location
This process is going to be much slower as you load and unload resources every time. If you choose to go this way, a better implementation would be to maybe consider doing 100 frames at a time, or some number larger than 1, because the processing time of handling the extra frames is going to be less than loading/unloading PQA.
Your second option is going to require more work outside of PQA to implement custom functionality through a Custom User Processor. Effectively this allows you to come up with a way to process incoming data in ways that you'd like. To do this you will need:
1) LabVIEW 2011 - Custom User Processors for PQA can only be developed in LabVIEW 2011. If you are under a SSP agreement with NI and only have LabVIEW 2012 currently, you still have access to older versions.
2) Vision Development Module - To perform your image processing
3) An unencrypted video source - Due to limitations of HDCP we can not expose the raw video feed to user processors.
In this user processor you would:
1) Load your static image/frame in directly, you wouldn't need to use the Media Ref input
Loop
2) Load the current frame from the incoming video array
3) Perform your video measurement with the Vision function, likely PNSR or SSIM since these are currently the only 2 referenced measurements in PQA.
To learn more about Custom User Proessor's, in the PQA help check out: NI PQA Executive and the NI PQA Configuration Panel>NI PQA Tabs>Processors tab>Customizable Output Processors>User Processor as well as: http://digital.ni.com/public.nsf/allkb/514058CC830D86EE86257881004CB45F
Paul Davidson
Sound and Vibration Software Staff Product Support Engineer
National Instruments

JMF Video Player Frame Rate comes down to zero

Hi
I am working on video Player using jmf. I am playing .mov file in the Applet. The appled have been signed and this part is working fine.
I am able to get the video from server to the client using signed applet. But the problem now i am facing is that after few seconds of video download the frame rate and bit rate both comes down to Zero and the movie stops playing. I am using .mov extension with approximately 2-8 MB size of video.
As i feels problem is coming with the http protocol. Because while playing the local video file with the same code it is performing well.

This blog is written by one of the principle guys who writes the Flash plug-in.
http://blog.kaourantin.net/?p=83
I think it might have some answers for you--not the answer you want.

Frame by frame video player or slow motion

the video player is outstanding but a couple of enhancements could make it perfect. frame by frame or slow motion could make it a more perfect tool for analyzing a golf swing or studying a surgical procedure. and if a still frame could be magnified or the video magnified during playback it could be all anyone would ever need. still frame grabbing would also be a useful tool. we also need the macro focus - it is an essential tool for recording documents and for producing video presentations of small items like jewels, stamps or coins.

Can anyone suggest an app for slow motion video playback with the bb playbook?

HD videos player for Nokia Asha305

Hi dear
I tried my best to find any HD videos player or any real player for Nokia Asha 305 in Nokia app store but I was unsuccessful can you help me on this topic please

tou need to convert the videos to nokias mp4 format.. not normal mp4 but nokias one.. you have to do this through the nokia software that came with your phone.. then you will be able to view them!
peace

Nokia x6 video player

I am using nokia x6 for the past one year.it is working smart .i bought this phone for Rs.15,800 but it doesn't playing most of the video formats like mp4 h264 video.its very disappointing one.so please update our phone to play such vidèos.mostly s60v5 phones doesn't playing such videos.so please update our phone video player to continue with nokia.

yeah this is the problem with s60v5 ,most of the time i need the format factory to convert into proper mp4 whenever i download the file from youtube downloader, pretty lame thing,nokia is not concentrating anymore for s60

Nokia 5233 video player?

I have nokia 5233 in which i use HCL earphones which sounds best in my customized equalizer settings.
But when i play videos in real player or in Video centre, it just uses NORMAL equalizer..
Is there any video player that can play 640x360 res. videos flawlessly, with equalizer..
I have smartmovie, but it doesnt play above 360x240..

Convert your video to mp4 (mpeg-4) format, if your current converter isn't working, try Xilisoft RMVB Converter.

Nokia n8 video player

I'm looking for a video player with ability to switch subtitles (.sub .srt) and audio tracks (.mp3 .ac3 .dts) -external and internal. Please tell me all the options and which ones are better. Thanks

Yeah me too have same problem...some videos are not showing in videos folder..

60fps Video showing Jittery/repeat Frames?

I have 59.94fps video in a 59.94fps comp, the video is 720p and is recorded from a HD Capture card. When I put the clip into After effects cs5, I get a strange jittery, repeat frame effect. It is only in a couple parts of the clip, but the strange thing is, in anyother video player/ editing software, it is fine, no repeat.
Basically what im getting is this, every so often, there is a jitter in the video, like so, it goes Frame 1-2-3-2-3-4-5-4-5-6-7-6-7-8-9. Its very annoying and renders the video usless. The video is .mp4
Thanks in advance for the help!
my specs are, Windows 7, AE CS5, ATI radeon HD GPU, 6GB RAM.

Here is Captured file info:
Format                           : MPEG-4
Format profile                   : 3GPP Media Release 4
Codec ID                         : 3gp4
File size                        : 974 MiB
Duration                         : 10mn 20s
Overall bit rate                 : 13.2 Mbps
Video
ID                               : 1
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 4 frames
Format settings, GOP             : M=4, N=32
Codec ID                         : avc1
Codec ID/Info                    : Advanced Video Coding
Duration                         : 10mn 20s
Bit rate mode                    : Variable
Bit rate                         : 12.9 Mbps
Maximum bit rate                 : 20.0 Mbps
Width                            : 1 280 pixels
Height                           : 720 pixels
Display aspect ratio             : 16:9
Frame rate mode                  : Variable
Frame rate                       : 59.940 fps
Minimum frame rate               : 59.887 fps
Maximum frame rate               : 60.006 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.234
Stream size                      : 958 MiB (98%)

I get a security sandbox error #2122 when i try to use ImageSnapshot on video player

hey guys... so all my application does is... it has a video player... and when i initiate the component it loads the flv from a different server, and plays the video... now while its playing the video i have a button called capture, and whe you hit that button the user is able to take snapshots of the current frame.
this seems to work perfectly locally, but as soon as i uploaded it to the server i get problems...
the error states:
SecurityError: Error #2122: Security sandbox violation: BitmapData.draw: http://website1.com/Content/swf/oneStopImageVersion.swf cannot access http://website2.com/videos/originals/Grand_Opening.flv. A policy file is required, but the checkPolicyFile flag was not set when this media was loaded.
     at flash.display::BitmapData/draw()
     at mx.graphics::ImageSnapshot$/captureBitmapData()
     at modules.videoHandler::videoHandler/captureVideo()
     at modules.videoHandler::videoHandler/___videoHandler_LinkButton3_click()
i have the crossdomain file in the root directory of website2.com, and i have the folloing line of code in there
<?xml version="1.0"?>
<cross-domain-policy>
     <site-control permitted-cross-domain-policies="all" />
     <allow-access-from domain="website1.com"/>
     <allow-access-from domain="*.website1.com"/>
         <allow-http-request-headers-from domain="*.website1.com" headers="SOAPAction"/>
</cross-domain-policy>
any ideas on how to fix this problem???
my actionscript code is as follows
public function captureVideo():void{
     var snapshot:BitmapData = ImageSnapshot.captureBitmapData(videoPlayer.videoDisplay);
     initialThumbnail.source = new Bitmap(snapshot); //this is the image tag in my mxml
any help is greatly appretiated!!!!
thanks in advance!

any one with ideas???
i've been doing some more research... and found a possible solution... where i could send the video thru a server proxy... but the only thing is doing that might slow down my process... i was wondering if there was any other solution to this problem??

Lack of All format playable Video player with Full Screen STRETCH feature

I am a big fan of Nokia and i know Windows phone is the world best smart phone.im using Lumia 820. but in my highend Lumia devices lack of a
All format playable Video player (like mkv etc.)officially from Nokia or Microsoft.pls this is very important thing for all Lumia user for HD movie experience.pls update current video player.now I'm using Moli player but there is 1
vital feature is missing...this is Full Screen STRETCH...when i play movie using Moli player on my phone screen upper and lower portion appear black bar.It mean Ascept ratio not match.This is very important for full screen movie exp.But this
feature is also available on Android MX player.
So,I request you please update current video player with
Full Screen STRETCH feature for windows phone user.Thank you.

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How do I stop iTunes from being my default video player

I have a slightly older Macbook Pro, on OSX 10.5.8. I have a bunch of video files on a wireless networked hard drive and the directory mapped to my desktop for easy access. I also have VLC installed for video playback. All the files are *.m4v.
Here is the problem. When I click to open one of these files it starts copying the whole file over the network to my iTunes, and insisting on opening from iTunes. If I click on File -> Open With -> it shows iTunes as the default. I can click on File -> Open With -> VLC and this works just fine.
But how do I change the default video player? All I want to do is stream it over my internal home network, I don't want copy the darn file every time I want to play something.
Thanks

Mac OS X: Double-Clicking a File Opens the Wrong Application - http://support.apple.com/kb/TS2291
-= Changing the application used to open all files of a certain kind (written with reference to OSX 10.4 but may not have changed) =-
1) In a Finder window highlight a file of the kind you want to change the application to open that kind of file.
2) While that file is highlighted, select File > Get Info or press command (apple or propeller icon) + i to get a file information window.
3) In the lower part of the info window there is an "open with" menu with a list of applications.
4) If your application is already in the box then it is the default application for opening that kind of file and you don't need to do anything more. Close the get info window.
5) If the application showing in the menu is not the one with which you wish to open the file then select a new application. If your application does not appear there then select the "other..." and track down the application (usually in the Applications folder at the main level of the computer).
6) If you wish to change all files of this type to open with this application in future, make sure the "change all" button is selected.
7) Close the get info window.

N8 Video Player and Photo Viewer not working prop...

Hi I just got a N8 a few months ago and its been going great until a month ago.
My video player is not displaying any the videos that I had on the phone or any of the videos I try putting on after. I then tried the photo viewer (it displays video as well for some reason) but that didn't have any of the videos and only some of my photos are being displayed.
I previously had the problem with the music player where it would be stuck on the music updating screen (not frozen) but I solved that by looking through the net and finding that you delete a certain file and it fixed that.
Thanks

Haven't figured it out yet, but will post if I find a solution.
The problem is, I'm trying to find a solution to a whole host of other problems on my N97, e.g. The problems I'm having with GPS (Maps 2 and 3 are both currently unusable), the problems I'm having getting my widgets, email etc to detect which connection I need using etc, the problems I'm having with reception, the problems I'm having with my ringtone etc. So this photo viewer problem is just another issue to add to the list.
As for the Facebook App, if I take a picture using the camera link within the application, it won't let me upload anyway, so I've stopped using it. I just use the standard Facebook Mobile site as the Nokia Facebook App is so slow, it's borders on useless.

Slip and slide tools don't display the four reference frames

According to the help page, "when you use the Slip or Slide tool, the Program Monitor displays the four frames involved in the edit side by side, except when editing audio only". On my machine, when I use the slip or slide tool, the program monitor continues to display the same clip; it does not divide itself up into the handy four reference frames at all. The tool still seems to work, doing its thing on the timeline, but it's useless without the four frames.
Anyone have any idea how I screwed this up, I have searched everywhere in the preferences etc, and also here and on google, but can't for the life of me figure out why it is doing this to me.
In the image below, I have the slide tool activated, and am dragging a clip, but the monitor window on the top right remains stubbornly singular.

Well I solved it myself. I will note it here so others in the same situation will find the solution.
I had installed the MainConcept Mpeg Pro plugin suite (v.5) soon after installing Premiere; Mainconcept apparently (and inexplicably) does not support this feature in the playback/monitor window. Which renders these tools useless when the Mainconcept playback is active. Very strange omission on Mainconcept's part.
To fix it go to:
Project>Project Settings>General
At the bottom of the window that pops up is a drop-down menu entitled "Video Rendering and Playback"; mine was set to playback with the Mainconcept Renderer; I switched it to Mercury Engine Playback and now the reference frames pop up as they should with Slip, Slide and other tools.
Problem solved!

Nokia video player CABAC Reference frames.

Similar Messages

Maybe you are looking for