Nokia VoIP Client using SIPS/SRTP freeze the mobil...

I'm using a N95 Firmware: R-159 30.0.015 (its happen with N95 8G too) and i've configurated a VoIP account with SIPS URI.
I' can make VoIP call and speak (the quality is great!) but when we hangup (me or the called) the Nokia VoIP Client did NOT disconnect and freeze the mobile(I've to turn off the device).
I've running the wireshark in my network and see no TLS transaction has been send on hangup from NOKIA device , so I' would like Know if someone can help me.

I figured if choose one SIP Account to run on 3G and one on WiFi the power consumption is low.
If both are switched to 3G as access point the power consumption is high.
Must be some kind of bug...

Similar Messages

How to develop VoIP client using SIP in J2ME?

Hi Everybody,
I want to develop a VoIP client in J2ME that connects to asterisk server of debian and can call to the registered user of asterisk server and can have a telephonic talk session easily.
Do anybody have idea regarding the development of the client or having tutorial that teaches the development of VoIP in J2ME or in any other way.?
PLZ help me to provide the solution.
Thanks in anticipation.
with regards,
KHAKHAR SAGAR

Hi
I am interested about developing VoIP application (using SIP) in J2ME platform. But I am stuck with the problem of MMAPI. Without using MMAPI J2ME has no access to mobile media devices, such as speaker or microphone, and without creating a player MMAPI can't play media data, such as sound or video. But its not possible to record voice and play voice data simultaneously using player in J2ME. So it seems almost impossible to implement VoIP application maintaining all its constraints and requirements, specially in case of delay and jitter.
I am looking for some solution, which will provide the ability to overcome this problem. I come out with two possible solutions, but not sure about their out come. If we can develop a native media application, we can have access to it by using KNI (K Native Interface). In that way we can take some risk to develop VoIP application for J2ME. My another solution is, we can handle the player using MMAPI to record and play voice data in mill second level, so that we can have a real time feeling, though I am not sure if its possible by using RTSP.
If any one have solution of this problem, please help us.
Reagards
Asif Mohammed Adnan

WIP310-G2: how to connect to an specific VoIP provider using SIP ?

Dear all,
I just received a WIP310-G2 and I am wondering how -or whether- I can configure it to connect to an specific Internet based VoIP provider using SIP
Cant seem to find how to do it....
Thanks a lot,
Alvaro

You connect your WIP310 to your PC using an USB cable. Then lookup the IP-adresse on the phone and enter that into a browser.
In the UI select Admin Logon and you can enter all the configuration details for your VoIP provider. I would recommned that you ask your VoIP provider to help you with a guide.
I used a PAP2T configuration example that worked for my WIP310, which I got from my VoIP provider.

FormsCentral retiring in July???!!! Are you freaking kidding me? My clients use this feature all the time. What do you suggest I do now? What service do I go with that is comparable to it? I need help with this asap!

FormsCentral retiring in July???!!! Are you freaking kidding me? My clients use this feature all the time. What do you suggest I do now? What service do I go with that is comparable to it? I need help with this asap!

I would suggest checking out http://www.logiforms.com. They have really good PDF support for both hosted PDF's and generating PDFs. You can:
populate PDF forms from a web form submission
Merge multiple PDF's together using conditional logic
Include uploaded images in the generated PDF
Get Electronic signatures on PDF's
Use conditional logic when creating PDF's
Convert HTML to PDF. You design in HTML and CSS and use form field wildcards and generate the PDF
More of the PDF features are explained here:
PDF Form Creator | PDF Form Maker | V3.Logiforms.com
They are also offering a 25% discount to anyone coming from Forms Central...

How to freeze the columns in excel exported from SSRS report??

We have created a report for our client. The client wants the report in excel format. As there are nearly about 30,000 rows in the excel. Client wants us to freeze the column header names in the excel so that even after scrolling down they
will be able to see the column names.
can anybody have idea how to achieve this in SSRS?

Hi Shard,
Thanks for your post, You can achive your requiremets by using the below logic. hope this will help you.
Steps to achieve it
1. Select the tabix and click on Tablix properties.
2. In the General tab under Column Headers section you can see "Keep header visible while scrolling" checkbox, check it.
3. Now the header row will be remain fixed in the report.
OR
1. In the grouping pane, make sure to turn on advanced mode (click on the small black down arrow on the far right of the grouping pane)
2. Select the corresponding (Static) item in the row group hierarchy
3. In the properties grid, set RepeatOnNewPage to true
4. KeepwithGroup to After
OR
1)Freeze the header of all columns[ Freezing table header ] : To do select static member of table header row from row groups [ Advanced Mode ] and set FixedData to true
2) Freeze the initial 2 columns : To do select static member of columns in column group and set fixedData to true .
How do you freeze the tablix header row in an Excel export file in SSRS 2008
Suhas Kudekar
Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
My Blog
Follow @SuhasKudekar

Lync Client uses wrong RTP Ports for calls from/to RGS with Agent Anonymity

We have QoS implemented and client ports for audio, video und application defined by Set-CsConferencingConfiguration. We also use firewalls in our LAN between the different VLANs for Clients, Servers and Gateways/SBC. Only RTP from the client with the defined
ports are allowed by the firewall. Media ByPass is enabled.
In all normal cases, the right ports will be used and marked by GPO with the right DSCP value. But if an agent get a call from a RGS which has agent anonymity enabled, the client uses a port in the range 1024-65535 for audio. Also if you make a call on behalf
of the RGS, the client use a random port between 1024-65535. As soon, as the source of the call is in another VLAN (e.g. a call from PSTN which comes in over a SBC in e separate VLAN), the firewall between the two VLANs block the RTP traffic.
We see the deny on the firewall log and in the SBC log we see, the reinvite for the media by pass with the IP of the agent and a not valid port. We also see, that no RTP from the client/agent will arrive the SBC and no RTP from the SBC will arrive the client/agent.
So the call will be disconnected, as soon as an agent wants accept the call.
Is there an additional setting to make sure, the Lync client always use the valid RTP port range?
This behavior exist in Lync 2010 and Lync 2013 clients.

Hi Holger,
Thanks for reply!
Sure! I set all AudioPorts on all Services, but the problem are not the ports used by the server, the problem are the ports used by the client. We set the client ports to 49152 with a count of 40. The client (2013 and also 2010) use these ports correctly in all
cases exept for call from/on behalf of an RGS with Agent Anonymity.
If we disable the RGS agent anonymity, restart the client of the agent, then the client uses also the correct source ports for RTP.
I've checked this behaviour now on 3 customer installations, our own productive installation and in our lab.
Because until now only one of our customers have firewalls between the internal VLANs, only this single customer have the issues...
Regards,
Stephan

X5800 how to use SIP and VOIP

Hello, I have a X5800 music, model 5800d-1 and I can enter all the necessary SIP data. I get the message (settings, connectivity, admin settings, sip settings) registered which is fine. My provider is freephonie. Question: 1) Although on the freebox the SIP is activated, I don't receive incoming call on my nokia. 2) How do I tell my nokia to call on the internet ? Is it possible only using SIP tel numbers which I can enter in the contacts list? Help much appreciated. Pierre.

SIP and VoIP are not synonymous. VoIP can indeed use SIP (and often does), but other services, such as video sharing for example, also use SIP.
It so happens that the 5800 has no native support for VoIP, which is why you can't make SIP calls using it.
Your only solution for SIP is to use third-party services such as fring, for example. Once logged into your fring account you can subscribe to a SIP service. Fring's systems will register to the SIP account and relay the comminucation through your fring account. There's lag and the audio quality isn't as good as a direct SIP connection but at least it works.
The alternative is to use a phone that supports VoIP/SIP natively.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Nokia N95 Hangs while using SIP

Hi
I have Nokia N95 with v 20, I am facing hang problem every time when i use SIP/VOIP application to call or receive call after 15 to 20 minutes mostly phone hangs and need to remove the battery and on it again....
any body have any solution for this hang issue...? please advice
Regards
Saqib

Go into your control panel, System > Hardware > Devices, look for the USB (Universal Serial Bus Controllers)
[+]USB
Generic USB hub
Bleah
Bleah
Simply right mouse click on all of them select "uninstall" once they've all been removed, restart your machine, windows will re detect all your USB devices, and hopefully this time windows will install either a newer or older version, different version of drivers.
Then re-install..... there's not a lot else you can try.

BlackBerry SIP VoIP Client / fgmicrotec

We are beta testing our BlackBerry SIP VoIP client und would like to invite everyone to join the trial phase. The registration is quick and simple and can be found here:
http://www.fgmicrotec.com/BlackBerry-VoIP.html
Here are a few facts:
- the client comes preconfigured with a test account on our system
- you can reconfigure the client to use any VoIP provider
- use it with your own SIP capable PBX (i.e Asterisk)
- dial from anywhere (call history, contacts, emails, SMS etc.)
- trial users with good bug reports get commercial license for free
- quick and reliable support via our forum http://www.fgmicrotec.com/forum/index.php

I had the similiar problem and finally I found solution:
www.sipVoipSdk.com

Using Host in Forms is not freezing the caller

I am using the Host built-in command to launch a web page from a client/server Forms6i application. I've found there are many different ways I can do this:
I can hardcode the path of the browser executable,
     host('"C:\Program Files\Internet Explorer\iexplore.exe" http://www.oracle.com/index.html');
use 'Start' with or without '@' and 'cmd /c ',
     host('@Start iexplore http://www.oracle.com/index.html');
     host('cmd /c Start iexplore http://www.oracle.com/index.html');
     host('Start iexplore http://www.oracle.com/index.html');
or use ShellExecute to launch the default windows browser.
I want the form to be frozen/unusable until the user closes the browser. I thought that was the default behavior of the Host command. However, that only happens in the example where I provide the path. I'd rather not have to provide the path to the browser executable, but I can't seem to get either of the other two methods to freeze the form for me. Any ideas?
Thanks,
Meredith

I suspect the reason you don't want to hard code the IE path if for the obvious reason that some users may have it installed somewhere else. Good thinking
For cases like this, it may be worth investing some time in offering some configurable options to the user. This would be a good first example. The option to choose the default browser related to the app. You could create a "Settings" option in your application where the user could set things like (these are just examples):
Preferred browser
Save current position (this would allow the app to start in the current position next time it was started)
Background color
And so on....
Use TEXT_IO to create a config file on the client machine that would store the values chosen by the user. On application startup (maybe in WHEN-NEW-FORM-INSTANCE), use TEXT_IO to read the values previously set. If no config file is found at startup, use TEXT_IO to create one with default values that the you decide. Doing something like this would make the application more customizable for the user, but it would also solve your current problem. With this design, you can get the path to the preferred browser based on what the user selected. So if they wanted Firefox instead of IE, they would get it and your app code wouldn't need changing to do it.
That said, whatever you decide to do, remember that in newer versions of Forms there is no "client/server" deployment option. Therefore the functionality of such calls will change is some cases. Hint-hint.... Please consider upgrading to the latest Oracle Forms version. The latest version is 11.1.2.2. In the latest version, you can do basically the same thing I described about with the addition of WebUtil. Therefore very little code would need to be updated when moving to the web.

N95 built in SIP/VOIP client.?

Does anyone knws how to setup N95 built in SIP/VOIP client.?
to make calls using WLAN.?
Thanks
Regards

never mind

[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)

Dear Experts,
i am getting the below error when i was giving * (Star) to view all the items in DB
[Microsoft][SQL Server Native Client 11.0][SQL Server]The text, ntext, and image data types cannot be compared or sorted, except when using IS NULL or LIKE operator. 'Items' (OITM) (OITM)
As i was searching individually it is working fine
can any one help me how to find this..
Regards,
Meghanath.S

Dear Nithi Anandham,
i am not having any query while finding all the items in item master data i am giving find mode and in item code i was trying to type *(Star) and enter while typing enter the above issue i was facing..
Regards,
Meghanath

I am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going of

i am using numbers in the new iWork. Just bought it 10 days back. I am not able to figure out how to add serial umbers from 1 to 100( for example) also i need to freeze the top header like in windows so that we can browse down without the heading going off. Can some one help?

Hi Jay,
Be aware that "Freeze Header Rows" and "Freeze Header Columns" apply only to rows and columns that are Header rows or Header columns. You can have up to five Header rows, Five Header Columns (and five Footer rows) on a Numbers Table.
"Header rows" is a special designation. Besides being able to be frozen, Header and Footer rows are not included in formulas referencing whole columns, making it possible to place formulas such as =SUM(B) at the top (or bottom) of column B without causing a self-reference error, These designated rows are also not included in sorts of the rows in a table.
Regards,
Barry

I have a football game recorded on a DVD R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit.

I have a football game recorded on a DVD+R disc that I was trying to view on my MacBook using DVD Player. The video comes onto the screen, but immediately freezes, and then disappears. An error message comes up saying that DVD player unexpectedly quit. My MacBook operating system is Mac OS X, version 10.5.8. DVD Player is App version 5.0.3, framework version 5.0.7.
However, the DVD+R works on both my Dad's and my brother's laptops. My Dad's laptop is an iBook G4 with Mac OS X operating system, version 10.3.9. The DVD Player is version 4.0. My brother's laptop is a MacBook Pro with Mac OS X operating system, version 10.7.2. The DVD Player is App version 5500.26.1 and framework version 5.5.0. The DVD+R plays fine on their laptops, but will not play on mine.
Anthony

Lao Bo,
yes, you can locate and copy a file from your HD to a USB key using UNIX commands. If you know the exact name of the file which you’re trying to locate, try this:
find / -iname filename -print
This command will search your entire internal disk for the particular filename. If you know that it’s within a particular user account, then you can save search time with this variation:
find /Users/username -iname filename -print
Either variation of this command will print all files found which have the given filename. Presuming that you’re able to identify the correct file, you can copy it to a USB key using the command
cp -p filename_returned_by_find /Volumes/USB_volume
If you’re not sure which volume name your USB key has, this command will show you what the possibilities are:
ls /Volumes
Please let me know if you have any trouble with these commands.

How can I use applet to get the desktop image of client

hi,I have a question to ask u.
How can I use applet to get the desktop image of client? Now I develop a web application and want user in the client to get his current image of the screen.And then save as a picture of jpeg format ,then upload it to the server?
I have done an application to get the screen image and do upload file to server in a servlet with the http protocal.

Since the desktop image is on the client's local hard drive, you'll need to look at trusted applets first.

Nokia VoIP Client using SIPS/SRTP freeze the mobil...

Similar Messages

Maybe you are looking for