Nokia Wireless Charging Plate not working
I got a free wireless charging plate through AT&T when I bought my Lumia 920 and the other day I woke up to find that my phone had not charged while laying on it overnight.
The LED indicator on the plate blinks rapidly, which according to the manual means there was some kind of charging error, but there doesn't seem to be any way of fixing or resetting it. It just blinks whether the phone is on it or not and no matter how many times I unplug it and plug it back in, it just blinks and will not charge my phone anymore.
It sat on my nightstand next to my bed and has never been abused or had anything happen to it that might have made it stop working, it just did, out of nowhere.
Does anyone on here know of a way of fixing it beside just unplugging it and plugging it back in as Nokia suggests? That method is producing no results.
It's looking like I'm going to just have to exchange it for a new one and hope this doesn't happen again. I can't find anyone else on the internet that seems to have had this problem, so hopefully it's not a big issue and mine just happens to be a lemon. I could understand if I had dropped it or something, but all it did since I got it was sit on my nightstand. One day it worked, and the next it didn't.
Solved!
Go to Solution.
I have had problems with the charging too. Some times it works good, some times it has stoped charging during night and some times it hasn't charged at all.
I keep my Fat Boy packed charging plate on the floor besides my bed. And we have electrical floor heating.
I guess that the magnetic field the floor heating creates, when it is on, is causing my problems... So likewise any disturbing magnetic fields can do the same. In my case the heating comes on at 10 PM and is normally on for hour or so. Quite often I go to bed before or at that time. So I am quite sure that the problem is what I just explained.
The question to Nokia is, that my phone is still showing that it is charging. Is the problem in the brains of the charging plate (does it have any?) or the phone (Lumia 920)? As it's clear that the external magnetic field can disturb the charging process, but like in my case the disturbance is only temporary. So couldn't there be more intelligence on the devices that they could recover from this?
I can correct it my self, if I noticed it before morning, by taking phone of the plate and putting it back. Couldn't the phone do this by itself when it notices that the battery actually isn't charging? I mean some how disconnect itself from the wireless charger and connect again...
Oh and the charging is okay despite my floor heating, when I manage to but the charging plate exactly right place on the floor. There is some one centimeter marging to do that. So I haven't got it right every time.
And I don't know what the light of the charger is sayin as it is inside the fat boy cover... Didn't even remember that there is any lights...
Similar Messages
-
Wireless charging plates not working
Just received two wrieless charing plates. Despite of the fact that their power adapters are white while they are black (Would be nice if Nokia could match their colors, it isn't so hard and would look much better) none of them seem to be working.
Tried both of them with two different Lumia 920s and nothing happens, no lights or anything. Is there anything I'm missing or did Nokia just sent two deffective units? I find it hard that I was that unlucky.
Any help would be greatly appreciated.Hi there mate,
Please check that you have placed the 920 in the correct area against the charger so that they charge. The area of the backside of the 920 that supports the Qi wireless charging is indicated in the user guide. If you have checked everything else, and it still isn't working, then you may have faulty chargers, or the phone's wireless charging function itself may be defective. It would pay to check with the retailer that you purchased the phone / charging plate with, to see if you can get it working in their shops -
Wireless dt900 charging plate not working?
Hello!
Hoping you all can help. I just received my charging plate today, and was excited to use it. I plugged it in, placed my phone on the plate, and the light flashes, and doesn't stop flashing, no matter what position I lay it. Is there any trick to get this charging for the first time, or any settings I would have to change? I've tried resetting my phone, unplugging and plugging the cord back in, and changing power outlets, but no luck. Any help would be appreciated! I have a Nokia Lumia 1020, if that helps.Hope you have fixed the Wireless Charging Case to your Lumia 1020 ..
Check Pg.11 of the User Guide. -
Nokia lumia 1520 with Nokia Wireless Charging Plat...
I brought a nokia lumia 1520 and a wireless charger from AT&T. I tried to charge my phone when it had almost no power in it. But the white light kept blinking while I put my phone on it. And I'm sure that no other device between the two objects. Does anybody know what is going on with it?
Solved!
Go to Solution.The AT&T 1520 does not have Q1 wireless charging. This is what the DT-900 is.
It has PMA wireless charging. AT&T had Nokia change the wireless chang platform to PMA, which is different than other Nokia phones.
Complain to AT&T ! I did. -
NOKIA 202 RED BUTTON NOT WORKING
I JUST TURNED OFF MY PHONE 202 AND after some time i try to switch on that phone but red button not worked and other keybuttons works good and i try flash the phone but it says remove cable and batery and put cable and put batery and power on but funny thing is my red button not worked and i just got dull finally i am asking you guys is there any solution to power on i try almost all key board tricks i.e * 3 gren red etc or a software to power on.MY NOKIA 202 RED BUTTON NOT WORKING
Hi, DEVRAMP. How did you flash your phone? Is there a battery indicator when you charge it? You may try the following solution below:
Check that the keypad is not locked.
Make sure that all keys are responding correctly when they are pressed. In some cases, a key may get stuck and freeze the whole keypad.
Try removing and replacing the covers (if your phone supports that feature). Check that the power and side keys on the cover are properly aligned (e.g. pushed out) to their respective positions to have a proper tactile feel when pressing the keys.
Keep us posted. -
Satellite A660 - Broadcom internal wireless adaptor is not working
Hi all,
My first post to this board - I have a new Toshiba Satellite A660 notebook - have only had it for about 4 weeks and it has turned out to be a disaster for me...
FIRST - I spend weeks getting everything on and configured the way I want it - then the hard disk starts to die...
I just got it back from the Toshiba service centre and NOW the wifi has stopped working...
The internal broadcom wireless adaptor is not working - but according to windows and the built in diagnostics it IS working...
HOWEVER - when I try to use wireless with the built in adaptor it can't detect any wireless networks...
I then plug in my backup usb netgear wireless adaptor and I can pick up and connect to both of my home wireless networks...
I am going overseas in a few weeks and need to know that my notebook is going to work/be reliable and not have any more problems - if anyone can help me with this it would be much appreciated.
John.A further update for you all...
Okay - went back to the Toshiba service centre - the first dead hard disk was replaced by them - but the REAL problem not spotted - it looks like my laptop came out of the Toshiba factory with a faulty motherboard - this in turn has now fried the second hard drive - and now - with a new motherboard and THIRD hard drive it looks like the hardware side of things MIGHT just be solved - but NOW I still have the problem that because the motherboard has been screwed since day one (I only bought this laptop in November 2010) it has basically stuffed/corrupted all of my backups - so now the service centre is charging me 60 dollars to get a set of disks so I can re-image the system myself when I have the chance - and then spend a month putting back all the applications and configuration and data the way I had it after the first few weeks of buying it (at that stage I thought I was good to go and had the perfect new laptop and setup for work...)
So - I'm heading off overseas in a couple of weeks - my 3 year extended warranty from Australia will not be of any use to me where I am going - not covered - but am STILL hopeful that I'll get the rest of the problems sorted - still can't run the toshiba hdd protection software for more than a few days without it dying and having to be reinstalled and the toshiba pc health monitor does not work at all - when I go to install it it doesn't recognize the bios or whatever - and on top of that I'm using third party hard disk monitoring software (because the toshiba stuff doesn't work on this toshiba laptop - but the third party stuff does) - well, anyway - the third party software is telling me the hard disk has reallocated sectors count error - and there is a CAUTION showing all the time - which I guess indicates that there is now a hard drive problem with the third hard disk (?)
Anyway - if ANYONE has had a similar run of bad luck to mine with the A660/O7U - I'd really like to know...
John. -
Lumia 920 Wireless Charging plate car adaptor?
Hello guys,
I really want to connect my wireless charging plate to my car. Maybe convert it to USB since USB car adapter can be found everywhere. Anyone knows where I can buy such converter?
Thank you.I believe that the corded connection from the wireless charging plate is a 2.5mm connection, and thus won't connect to USB and therefore there are no accessories. 2mm chargers and 2.5mm charger connections are usually the Nokia proprietary technology, so unless you solder one yourself, I doubt you will find what you are looking for, my friend.
-
How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?
HP Photosmart Prem C410a All-in-One
Windows 7 64-bit
Wireless Radio is not working
Trying to change from USB to wireless setup
purchased at Staples on 8/19/2010 - means warrenty has expiredWith the printer ON, unplug power from the back of the printer for 30 seconds. Does that reset the radio?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Please be informed me... with my battery or charger problems....
my iPad 2 charger is not working....
since I've got it for five days ago, I only use it for three times....
Are they going to replace it with a new one ?Most likely yes. There's a manufacturers warranty against defects for a year. I'd contact your place of purchase and talk to them about it.
-
HT3917 My apple wireless keyboard is not working after new batteries installed
My apple wireless keyboard is not working after new batteries installed.
Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.
-
Charger is not working properly
Hi, after 10.9.2 update my charger is not working properly. First I thought the problem was the charger itself had died, but then I saw a pale light. I searched here and found that resetting SMC could be a solution. It worked for a while, but now the problem is back and resetting again doesn't work. I also resetted PRAM and nothing happens. The light is now green, but battery status says it isn't charging.
What else can I do? Mavericks updates are a headache that has already made me format my laptop – because of another problem– and I'd love to avoid it. Thanks in advance.If you are still under warranty and/or have AppleCare, call them. Let them deal w/it.
OOW: Take your MBP & charger to your local Apple Store or an AASP. Diagnostic testing is FREE! -
Problem : System Freezes frequently on any hardware scan or changes.
Symptom : Wireless Keyboard Mouse not working.
Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
Soultion : Please follow steps below
Step 1: Start > run > regedit
Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
This worked for me. Hope this works for you. Enjoy..!!Hi AshishSrivastava,
Thank you for your sharing and update.
Besides, I will change this thread type as discussion.
Best regards
Michael Shao
TechNet Community Support -
My iPad 2 charger is not working when plugged to a wall..but when plugged to a computer...it says unknown device...what's happening and how do I fix this problem?!
Have you recharge your iPod for at least 2 hours, preferably till the Full charge Battery symbol comes ON.?
See this Apple support Article
http://www.apple.com/support/ipod/five_rs/classic/
You did not by chance bought the Hello Kitty special edition?
Have nice day! -
My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
Just in case the title is too long to show, I have re-pasted here:
The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?BDAqua wrote:
Hello & welcome to the Forums!
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php
http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
http://doublecommand.sourceforge.net/
Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss? -
Wrt610n wireless network does not work after firmeware upgrade
Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
StefanUpdate -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?
Maybe you are looking for
-
Accruals Condition Record posted late in COPA along with the Settlement
Hi Gurus, Accruals condition record for 1 item in an Invoice is posted along with the Settlement Credit Note in COPA. While condition records of the other items from the same invoice were posted on the Billing Date itself. For eg: Invoice 111 D
-
Transferring content from old apple ID to a new one?
As question says I need help transferring content from old apple ID to a new one as my old apple ID was reported for spam and now I can't use it, thanks! [email protected]
-
How to find the source code of EJB?
I have download the EJB class file on the sun's site,but I wanna download java file of EJB,how to find the java file?
-
TS3899 Mail is not working, please help?
I did all the steps listed above but my mail still isn't working! And I am not receiving any mail! Please help!
-
Java application to connect to AP 7.00 (IPC)
Hi, I have to develop standalone java application that connects to IPC and does configurations via the IPC Server (via the RFCs the IPC Server exports). I have JCo connection to the SAP ECC system (only one server. I assume the IPC server is running