Nokia Wireless Presenter won't launch

I already posted this to the end of another thread, but since it is already marked "Solved" though I should start a new one.
I have an E71, Nokia Wireless Presenter is installed. According to PC Suite, I am using Microsoft Bluetooth Stacks v6?.
My problem is I can't get the Wireless Presenter to launch from my phone. Everytime I try, I get a splash screen with something about DRM, and then it goes back to the menu screen. It also shuts down the BT on the phone.
I have downloaded and reinstalled the software, to no avail.
Any suggestions?
Thanks

Hi,
Have you purchased the application ? Or is it a Cracked application ?

Similar Messages

Nokia wireless presenter (mobilphone part)

Hello,
I deleted the nokia wireless presenter on my series 40 phone (6233) by mistake.
It isn't a problem to get the software from the Nokia download center, but only the windows part, not the component (I think the .jar) for the mobile phone.
Could someone help me to get the missing part or tell me a link, where I can download it?
Bye,
Hannes

Hi veganjames
Which software version is your 3110 Classic, key in *#0000# on standby screen as it has been posted that application not present with v4.91 software.
If you check your inbox for PM you will find a link.
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to use Toshiba BT with Nokia Wireless Presenter?

How in earth I'm supposed to do it? Nokia help file is very very bad. Toshiba finds my phone, but only as a modem, I have a feeling that it is a wrong protocol At control panel, I can find a Local Bluetooth COM-port, and LocalCOM-client says COM8.
Phone will find the notebook, but that's it, it will hang soon after, when trying to get connected. BT version is 5. something (newest)

Thank you for your help.
I only have a Dial-up networking in customs. Maybe this is because I have a 6120c a symbian S60 V3 phone.
Maybe there is no support yet?
I did install BT again but no difference.

Psiloc Wireless Presenter for Nokia E52

I wanted to get a bigger(one with more space) memory card to put in my nokia. Before changing memory cards, I made a backup of all contents(cut/paste everything onto my pc) in the memory card that came with the phone. After doing so, I switched to the new one and simply put all the contents on the new one. I then proceeded to check if everything was in order and realized that several applications no longer appeared in the menu, but were shown as installed in the app manager. I tried resetting my phone to see if the apps would reappear and also updated it again to see if that would work, but they still weren't there. As a result, I uninstalled them thinking I just had to reinstall them. I searched for them on Ovi Store and then the nokia site, but realized some weren't available such as Psiloc Wireless Presenter. I was wondering if it's possible to retrieve Psiloc WiPresenter somehow? I would greatly appreciate anyone's help

Not sure I understand. Did you buy Wireless Presenter, or did it come with your phone? If it came pre-installed on a new phone, that is an issue between you and Nokia. Maybe (a long shot?) you could buy another memory card from them with it pre-installed? If you purchased (a 30 euro program), you should have a receipt to present to either Ovi support or to Psiloc directly.
There is also a separate "Phone Applications" forum here, where you might get better advice.

My steam won't launch ever since I updated to Yosemite I don't know what is going on.

Whenever I try to launch it, it says "Steam quit unexpectedly" I have tried redownloading it 5 times and have every software up to date. I also have tried
deleting all my steam files and it still doesn't work. Here is a screenshot:
I also downloaded a program called EtreCheck that checks for issues so here is what it found:
Problem description:
My steam won’t launch ever since I updated to Yosemite I don’t know what is going on
EtreCheck version: 2.0.10 (97)
Report generated November 2, 2014 at 11:27:34 AM EST
Hardware Information: ℹ️
MacBook Pro (13-inch, Late 2011) (Verified)
MacBook Pro - model: MacBookPro8,1
1 2.4 GHz Intel Core i5 CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1333 MHz ok
BANK 1/DIMM0
2 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 3000 - VRAM: 384 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:20:3
Disk Information: ℹ️
ST9500325ASG disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 498.88 GB (350.08 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R   UJ-8A8
USB Information: ℹ️
Apple Computer, Inc. IR Receiver
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Splashtop Streamer.app
[not loaded] com.splashtop.driver.SRXDisplayCard (1.6 - SDK 10.7) Support
[not loaded] com.splashtop.driver.SRXFrameBufferConnector (1.6 - SDK 10.7) Support
/Library/Application Support/Hotspot Shield
[not loaded] com.anchorfree.tun (1.1.1 - SDK 10.8) Support
/Library/Extensions
[loaded] com.logmein.hamachi (1.0.0) Support
/System/Library/Extensions
[loaded] com.Cycling74.driver.Soundflower (1.6.6 - SDK 10.6) Support
[loaded] net.telestream.driver.TelestreamAudio (1.1.0 - SDK 10.8) Support
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.adobe.AdobeCreativeCloud.plist Support
[failed] com.adobe.CS5ServiceManager.plist Support
[running] com.logmein.hamachimb.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[not loaded] com.splashtop.streamer-for-root.plist Support
[running] com.splashtop.streamer-for-user.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[loaded] com.anchorfree.ajaxserver.plist Support
[loaded] com.ea.origin.ESHelper.plist Support
[running] com.logmein.hamachi.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.splashtop.streamer-daemon.plist Support
[loaded] com.splashtop.streamer-srioframebuffer.plist Support
[loaded] net.freemacsoft.LiteIcon.LIHelperTool.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[failed] com.akamai.single-user-client.plist Support
[loaded] com.divx.agent.postinstall.plist Support
[loaded] com.genieo.completer.download.plist Support
[loaded] com.genieo.completer.ltvbit.plist Support
[loaded] com.genieo.completer.update.plist Support
[failed] com.google.keystone.agent.plist Support
[invalid?] com.valvesoftware.steamclean.plist Support
[running] com.w0lf.cDock.plist Support
[invalid?] net.brockerhoff.QuayMenu.plist Support
User Login Items: ℹ️
Steam Application (/Applications/Steam.app)
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Off-Helper UNKNOWN (missing value)
TotalFinder UNKNOWN (missing value)
uTorrent Application (/Applications/uTorrent.app)
Origin Application (/Applications/Origin.app)
Hotspot Shield UNKNOWN (missing value)
Genieo UNKNOWN (missing value)
Genieo UNKNOWN (missing value)
Genieo UNKNOWN (missing value)
VMware Fusion Start Menu UNKNOWN (missing value)
Genieo UNKNOWN (missing value)
CrossOver CD Helper UNKNOWN (missing value)
TuneupMyMac UNKNOWN (missing value)
Internet Plug-ins: ℹ️
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
Default Browser: Version: 600 - SDK 10.10
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
OVSHelper: Version: 1.1 Support
DivXBrowserPlugin: Version: 2.2 Support
QuickTime Plugin: Version: 7.7.3
OfficeLiveBrowserPlugin: Version: 12.3.4 Support
Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
JavaAppletPlugin: Version: Java 7 Update 67 Check version
User Internet Plug-ins: ℹ️
SOEWebInstaller: Version: 1.0 - SDK 10.5 Support
NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
Safari Extensions: ℹ️
GoPhoto.it
Omnibar
iTube Studio
Searchme
DivX Plus Web Player HTML5 <video>
OpenIE
3rd Party Preference Panes: ℹ️
Akamai NetSession Preferences Support
Flash Player Support
Java Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
      11% LogMeIn Hamachi Menubar
      0% syslogd
      0% WindowServer
      0% launchd
      0% opendirectoryd
Top Processes by Memory: ℹ️
202 MB mds_stores
189 MB installd
133 MB com.apple.WebKit.WebContent
129 MB Finder
86 MB ocspd
Virtual Memory Information: ℹ️
417 MB Free RAM
2.18 GB Active RAM
417 MB Inactive RAM
1.14 GB Wired RAM
10.58 GB Page-ins
195 MB Page-outs

Genieo Uninstall
Genieo Uninstall (2)      see post by Linc Davis
TuneupMyMac UNKNOWN (missing value)
Also uninstall according to the developer's instructions.
I also would remove uTorrent. You can get adware/malware and other junk from a Torrent download.

E71 psiloc wireless presenter

unable to connect psiloc wireless presenter using bluetooth, although the phone gets connected using blutooth and remains connected. I get the error message 'communication failed'.I updated the bluettoth drivers too.
any suggestions to resolve this? Thanks.

I finally solved the problem.
You got to delete the inbuilt wipresenter and drm common solutions from the phone .
then install the full licensed version free from this link download:
http://nds1.nokia.com/phones/files/software/Nokia_E71_Psiloc_WirelessPresenter.sisx
voila!!! it starts working.
but im having problems with the BT mouse application in it is not working at all. trying to find a solution for it now.
enjoy
Kalyan
Message Edited by vkalyanc on 28-Dec-2008 04:08 AM

Where can I buy a - Nokia Wireless Keyboard SU-8W ...

Hi All,
I am presently in Riyadh and in search for a Nokia Wireless Keyboard SU-8W to purchase. Can anybody help me locate a shop where its available?
Thanks in advance.

Click this link > http://mea.nokia.com/A4254052?storelocator_content_country=SA
and enter the name of the city
Message Edited by babdi on 17-May-2008 12:03 PM
If my post has helped you please click the white star on the right

Safari won't launch on on iPad - Where to get help?

As of 7:00 pm last evening (2/16/2013) my Safari won't launch via my iPad. It is not a wireless connection problem as my other devices work just fine and load. I have narrowed it down to Safari just not connecting. Any help or direction would be appreciated. Thanks

iPad community?
https://discussions.apple.com/community/ipad/using_ipad
Make sure that you know the network name and password.
Settings > General > Reset > Reset All Settings

Non-Apple applications won't launch

On Intel iMac, recently many non-Apple applications won't launch, including Photoshop, Indesign, Quicken, Filemaker, Techtool Pro. On the other hand, Mail, Safari, iPhoto, iTunes, Pixadex, Ultralingua all launch just fine. The non-launchers quickly present the window with Ignore, Report..., Relaunch; and using Relaunch just brings the window up again.
I've tried Disk Utility, both from the drive and from the OSX install disk; Time Machine back to just before the problem started; removed .plist file from Preferences: all to no avail.
While this problem started one week ago, we have had a new iPhone 3G since July 12 (since I see a few discussions with the same error codes related to iPhone).
Below are the error reports for Photoshop and Filemaker, and some system info.
What can I do to fix this? Thanks!
Model: iMac7,1, BootROM IM71.007A.B03, 2 processors, Intel Core 2 Duo, 2.4 GHz, 1 GB
Graphics: kHW_ATIr600M76Item, ATI,RadeonHD2600, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
PHOTOSHOP
Process: Adobe Photoshop CS2 [272]
Path: /Applications/Adobe Photoshop CS2/Adobe Photoshop CS2.app/Contents/MacOS/Adobe Photoshop CS2
Identifier: com.adobe.Photoshop
Version: 9.0.2 (9.0.2x312 [20060822.902x312 02:00:00 cutoff]9.0.2x311) (9.0.2)
Code Type: PPC (Translated)
Parent Process: launchd [147]
Date/Time: 2008-08-09 14:26:42.705 -1000
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_CRASH (SIGILL)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 ??? 0x801a308a 0 + 2149200010
1 translate 0xb80ecd11 gettimeofday_wrapper + 37593
Thread 1:
0 ??? 0x800bc4a6 0 + 2148254886
1 ??? 0x800c3c9c 0 + 2148285596
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed6f5 0 + 2148456181
4 ??? 0x800ed5b2 0 + 2148455858
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb813cfcc ecx: 0xb7fffa6c edx: 0x801a308a
edi: 0xb81d8794 esi: 0x00000004 ebp: 0xb7fffa98 esp: 0xb7fffa6c
ss: 0x0000001f efl: 0x00000246 eip: 0x801a308a cs: 0x00000007
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x9230b958
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
NO CRASH REPORT
FILEMAKER
Process: FileMaker [517]
Path: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker
Identifier: com.filemaker.pro7
Version: FileMaker Pro version 7.0v1a (7.0.1)
Code Type: PPC (Translated)
Parent Process: launchd [147]
Date/Time: 2008-08-09 14:30:10.117 -1000
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXCBADINSTRUCTION (SIGILL)
Exception Codes: 0x0000000000000001, 0x0000000000000000
Crashed Thread: 0
Thread 0 Crashed:
0 translate 0xb80a20a7 0xb8000000 + 663719
1 translate 0xb80bdb8b 0xb8000000 + 777099
2 translate 0xb80b7007 0xb8000000 + 749575
3 translate 0xb80d49c0 0xb8000000 + 870848
4 translate 0xb813ce79 spinlockwrapper + 1981
Thread 1:
0 ??? 0x800bc4a6 0 + 2148254886
1 ??? 0x800c3c9c 0 + 2148285596
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed6f5 0 + 2148456181
4 ??? 0x800ed5b2 0 + 2148455858
Thread 2:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816f427 CallPPCFunctionAtAddressInt + 87491
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 3:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816e6a1 CallPPCFunctionAtAddressInt + 84029
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 4:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816e6a1 CallPPCFunctionAtAddressInt + 84029
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 5:
0 translate 0xb815282c spinlockwrapper + 90480
1 translate 0xb816e6a1 CallPPCFunctionAtAddressInt + 84029
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spinlockwrapper + 4259
Thread 0 crashed with X86 Thread State (32-bit):
eax: 0x00000000 ebx: 0xb80a2028 ecx: 0xb7fff95c edx: 0x800fb082
edi: 0x00000002 esi: 0xb81d8c18 ebp: 0xb7fff9c8 esp: 0xb7fff990
ss: 0x0000001f efl: 0x00010282 eip: 0xb80a20a7 cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037
cr2: 0x800fb000
Binary Images:
0xb8000000 - 0xb81d7fe7 translate ??? (???) /usr/libexec/oah/translate
Translated Code Information:
Rosetta Version: 21.03
Args: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker -psn0176171
Exception: EXCBADINSTRUCTION (0x0002)
Thread 0: (0xb019cdb8, 0xb815282c)
0x957fe8c0: /usr/lib/libSystem.B.dylib : _pthread_condwait + 1260
0x0274a478: No symbol
0x02891fc8: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x02737618: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x957fe910 ctr: 0x957bb490
r00: 0xffffffdb r01: 0xf0182c80 r02: 0xa09c6924 r03: 0x00004903
r04: 0x00004a03 r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x00b34000 r09: 0x00000001 r10: 0xbfffec50 r11: 0xa09cb9ec
r12: 0x957bb490 r13: 0x00b341d8 r14: 0x00000000 r15: 0xa0a00d44
r16: 0x00b34000 r17: 0x957c0e1c r18: 0xbfffec70 r19: 0x00000020
r20: 0x957c0e6c r21: 0x00000000 r22: 0xbfffec70 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa09ce3e8
r28: 0x00c382fc r29: 0xa09c6924 r30: 0x00c38328 r31: 0x957fe3e8
Thread 1: (0xb009adc8, 0xb815282c)
0x00000000: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : + 0
0x9585e7c0: /usr/lib/libSystem.B.dylib : _sleep + 76
0x0274c2b4: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0xbfffed30: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x958473f0 ctr: 0x957bb5b0
r00: 0xffffffa6 r01: 0xf0080ca0 r02: 0x00000000 r03: 0x00000062
r04: 0x0948111b r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x80000000 r09: 0x00000000 r10: 0x00000000 r11: 0xa09cb62c
r12: 0x957bb5b0 r13: 0x957c0f80 r14: 0xbfffece0 r15: 0xa0cdb6bc
r16: 0x957c193c r17: 0xa0ccb6bc r18: 0xa0cdb6bc r19: 0x00c30240
r20: 0xa0cc6174 r21: 0x00c2ae40 r22: 0xbfffede0 r23: 0x00000003
r24: 0x00000003 r25: 0xa09d72b8 r26: 0xf0080d50 r27: 0xa09d72b8
r28: 0x00000062 r29: 0x0948111b r30: 0x00000000 r31: 0x958472b8
Thread 2: (0xb011bdb8, 0xb815282c)
0x957fe8c0: /usr/lib/libSystem.B.dylib : _pthread_condwait + 1260
0x0274a478: No symbol
0x0275ab14: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0xbfffebd0: No symbol
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x957fe910 ctr: 0x957bb490
r00: 0xffffffdb r01: 0xf0101c70 r02: 0xa09c6924 r03: 0x00004703
r04: 0x00004803 r05: 0x00000028 r06: 0x00000030 r07: 0x00004603
r08: 0x00000000 r09: 0x00000001 r10: 0xffffff8f r11: 0xa09cb9ec
r12: 0x957bb490 r13: 0x014fa810 r14: 0xbfffeb90 r15: 0x00000000
r16: 0x00000000 r17: 0xbfffebe0 r18: 0xbfffebc0 r19: 0x00000000
r20: 0x02784324 r21: 0x02c59248 r22: 0xbfffebc0 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa09ce3e8
r28: 0x00c3841c r29: 0xa09c6924 r30: 0x00c38448 r31: 0x957fe3e8
Thread 3: Crashed (0xb7fff5ec, 0x800bc4a6)
0x957c3520: /usr/lib/libSystem.B.dylib : szonecalloc + 232
0x922d8e78: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : ripcInitialize + 28
0x922d9064: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/Resources/libRIP.A.dylib : _CGWindowContextDelegateCreate + 36
0x947d90dc: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ CoreGraphics.framework/Versions/A/CoreGraphics : _CGWindowContextCreate + 200
0x915a09a0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : WindowData::GetCGContext() + 88
0x915a0474: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : WindowData::PrepareForVisibility() + 128
0x9159fb70: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : __ShowHideWindows + 276
0x9159fa4c: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _ShowHide + 36
0x9159f9b0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : MBarDraw() + 76
0x9158b2f0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : ShowBar(unsigned char, unsigned char) + 356
0x915abcd0: /System/Library/Frameworks/Carbon.framework/Versions/A/Frameworks/HIToolbox.fra mework/Versions/A/HIToolbox : _SetMenuBarObscured + 220
0x000d3994: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : ShowClarisScreen(unsigned char*) + 48
0x0012acc8: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : CFMProApp::InitApplication() + 1084
0x0037e870: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : CMacApp::Main() + 64
0x00128194: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : _main + 28
0x00001f48: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : __start + 460
0x00001d78: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : start + 48
0x00000000: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x922d7810 ctr: 0x922d903f
r00: 0x00000000 r01: 0xbfffe870 r02: 0xa03977e4 r03: 0xa039436c
r04: 0x00000000 r05: 0x00000010 r06: 0x00000005 r07: 0x00000000
r08: 0x00000005 r09: 0x00002e24 r10: 0x00cfc080 r11: 0xa09cb6d4
r12: 0x922d9040 r13: 0x00000000 r14: 0x00000001 r15: 0xbfffeb40
r16: 0xbfffec1c r17: 0xfffffff5 r18: 0x00000000 r19: 0x00000000
r20: 0xbfffeb40 r21: 0x00000001 r22: 0x00000000 r23: 0x00c2b8d0
r24: 0xa039436c r25: 0x00000a41 r26: 0xa0879024 r27: 0xa03977e4
r28: 0x00000000 r29: 0x00c5ad30 r30: 0x00c62fc0 r31: 0x922d77e4
Thread 4: (0xb021ddb8, 0xb815282c)
0x957fe8c0: /usr/lib/libSystem.B.dylib : _pthread_condwait + 1260
0x0274a478: No symbol
0x027c106c: No symbol
0x0274b4d0: No symbol
0x0274ac04: No symbol
0x9584ce8c: /usr/lib/libSystem.B.dylib : _pthreadbody + 40
0x00000000: /Applications/FileMaker Pro 7/FileMaker Pro.app/Contents/MacOS/FileMaker : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x957fe910 ctr: 0x957bb490
r00: 0xffffffdb r01: 0xf0203c20 r02: 0xa09c6924 r03: 0x00004b03
r04: 0x00004c03 r05: 0x00000000 r06: 0x00000000 r07: 0x00000000
r08: 0x1614a600 r09: 0x00000001 r10: 0x00000800 r11: 0xa09cb9ec
r12: 0x957bb490 r13: 0x9584cbac r14: 0xbfffee30 r15: 0x00000002
r16: 0x9584cc3c r17: 0x957bc5b0 r18: 0xbfffebd0 r19: 0x00000000
r20: 0x957bc66c r21: 0xbfffeb80 r22: 0xbfffebf0 r23: 0x00000000
r24: 0x00000000 r25: 0x00000000 r26: 0x00000000 r27: 0xa09ce3e8
r28: 0x00c531cc r29: 0xa09c6924 r30: 0x00c531f8 r31: 0x957fe3e8

No idea what caused it, but your PPC emulator is definitely hosed and doing a clean installation would probably be less time consuming than figuring out what the problem is.
This is also all very old software that was never meant to run in Leopard at all, so you should consider the possibility that some of it will simply never work.

Classic won't launch after upgrade to Tiger

I have a user who's machine was just upgraded to 10.4.5, and now Classic won't launch.
I copied the system files from the resource folder in case they were corrupt, but it didn't help.
I tried to launch classic with extensions off, no go.
Rebuilt the desktop, no help.
when you try to launch Classic, it opens the start window and just hangs. Left it for half an hour, and it never launched.
I looked for the DivX file in /Library/application support, nothing there.
classic worked fine under 10.3.9.
Any thoughts on what to do next? Is it safe to reinstall OS 9.2 overtop or is a complete wipe and load necessary (hope not, as user has beaucoup third party apps).
Help!
Thanks,
Lisa

I have a user who's machine was just upgraded to
10.4.5, and now Classic won't launch.
I tried to launch classic with extensions off, no
go.
Rebuilt the desktop, no help.
when you try to launch Classic, it opens the start
window and just hangs. Left it for half an hour, and
it never launched.
Same problem with my PB G4 : Classic won't launch since I upgraded to Tiger.
When I try to launch Classic, the usual start Window appears and then the following message :
The update of the files belonging to Classic presents a problem.
Classic could not update its files in " System Folder" of "Macintosh HD
Didn't find any DivX file
Before, Classic worked fine under 10.2.8
I Installed a new OS 9.2.2 , and renamed the former system " Old System"
What's next ?
iMac G4 800mhz & PB G4 667mhz Mac OS X (10.4.5)

Random (most) apps won't launch. both in 10.5.5 & 5.6

random (most) apps won't launch. both in 10.5.5 & 5.6
also, i have a dup'd & bootable version of my os on an external drive. when selecting it to boot from in startup disk, the laptop shows the apple logo and the drive spins up and then spins down with which then the laptop totally powers off. this happens, again, during the showing of the apple logo. tried connecting the drive via fw 400 & 800.
but like the first sentance, my apps aren't launching. i have gone thru disk utility, leopard cashe cleaner, mac pilot, oynx and even looked over various permissions. basically used every tool in all of those apps.
don't know if the drive boot failure has anything to do with it, but i thought i'd mention it.
also, this started in 10.5.5. after trying everything listed above, i upgraded via the combo update and the problem continued.
i have disconnected everything and tried all of what i know. might anyone have the same experience or some tricks to try to snap this macbook pro back into shape?
thanks....

The only freeware is Disk Utility, which is basically running fsck. You could boot from your install disk, then access the Disk Utility from there and run the Repair Disk function. At least you will then see what the failure is. AFAIK all free utilities which will run a repair function use the same UNIX routine which is already present on your Mac. If it won't work, then you are going to have to pay, the two disk repair programs that have the best reputations are Disk Warrior TechTool Pro, with more people preferring Disk Warrior. Be sure to use Disk Utility to check the SMART status of the drive too (depending on the drive this may not be available). Also see if you can Repair Permissions in Disk Utility when booted normally.
The only somewhat more problematic than normal applications I have noticed that caused higher than average glitches are third party goodies, especially torrent programs and things like Speed Download and Little Snitch. Of course, things that hack the system can be problematic too, I avoid Unsanity haxies for instance, although lots of people love the stuff.
Francine
Francine
Schwieder

Stickies won't launch

Hello,
My Stickies app in Leopard 10.5.8 won't launch after i updated from 10.5.7 or I suspect after an iPhone sync using iTunes. The "You cannot open the app Stickies because it is not supported on this architecture" message pops. I am totally in the dark about what to do & how to restore my stickies notes.
Can anyone help me on this?

Hi Chris!
If you have never been able to load Stickies, the .plist pref file be not be present.
You probably don't have the file below either, do you?
HD > Users > Your Account > Library: StickiesDatabase
If that file is present, move it to the Trash, but don't empty, and try to load Stickies again.
Have you looked at Get Info (Command + I keys), to check the Ownership & Permissions?
ali b

CSS 8.3 in Win7 won't launch - error re: css_admin.exe Entry Point not found... Help

New install of Win7 / all Win7 drivers installed & working
Except... during launch of CSS 8.3 (w & w/o patch installed - tried both ways), an error window pops up with:
css_admin.exe - Entry Point Not Found (title bar)
(Red X in window)
The procedure entry point
??0LocalFileFormatTarget@xercesc_2_7@@QAE@QBQAVMemo
ryManager@1@@Z could not be located in the dynamic link
library xerces-c_2_7.dll.
?? What is all this stuff mean ??
(the underscore is NOT present in the window, by the way...)
HELP! Anyone have ANY idea what the above lingo is re CSS and why it won't launch without popping up a window with this error, whatever it is??
I'm days into this reinstall and this is my "last" hangup / called support and they won't touch it since i didn't BUILD it with Windows 7 from them... just don't get this mindset. Only spent 5 digits (around $20,000 +) with Lenovo so far last year / may be the last dollar - I've run into many issues with support lately, for one the T61p I have has had 2 sys boards swapped, processor, 2 keyboards (after "loose screws from sys board swap" were found rolling around inside - yes, loose) among many other issues / only TP I've ever had issues with / want to stay with them, but if I have to fight city hall to swap out a lemon, heading out into the wild blue.

Try the following user tip:
iTunes for Windows 11.1.4.62: "The procedure entry point: ?videoTracks@QTMovie@ [...] could not be located ..." error messages when launching iTunes

HELP. I've tried everything! iTunes won't launch!

So i've installed and re-installed the latest version of iTunes, and still, i can't open it. I used to have iTunes 4, which i was completely happy with, so i never upgraded it. Then i got a 2nd gen iPod Nano, which is only compatible with iTunes 7, so i had no choice but to upgrade. I've tried clicking the iTunes desktop icon a million times, i've tried "Start", "Run", "iTunes", and i've gone into the C: Drive and gone into where iTunes was originally located, to click that, and still, nothing happens. I just see an hourglass for a few seconds, but then it disappears, and nothing happens at all. I've looked all through the technical support pages from Apple, and still, nothing. I've tried everything they've recomended, and none of it has opened iTunes 7 for me. Luckily, i came across my original "Install iTunes" installer for iTunes 4, so i deleted iTunes 7 and reinstalled iTunes 4, to see if i could open that. I had no trouble with opening iTunes 4, so i thought i could reinstall 7 and see if it worked. So, i deleted iTunes 4, and tried to reinstall iTunes 7 again. It still won't launch. I have all of my music backed up, so i'm not worried about losing any of the files or anything like that. I just want to know how to get iTunes to launch.
PLEASE HELP
Windows XP Pro

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Dock won't launch at startup for all users

Any thoughts on why the Dock app won't launch at startup. This happens for both my admin account and the guest account. I am running OSX 10.8.2 on a 2008 MacBook Pro. Previous to this issue I had been messing/deleting the plists associated with the Dock (as per other discussions) because of the Dock process taking up 100% of the CPU and getting the box hot. This issue has of course resulted in the Dock not appearing, as well as Alt-Tab not working, reminders not working menu bar, and other Dock functions. I can launch the Dock app via the terminal but it's still wonky, like the iTunes (newest) GUI doesn't function and the DVD player won't work (seems to be a similar GUI issue). For now I've stuck the Dock app in the users login preferences but that's a bad work around since there are the other symptoms that are still going on.
Thoughts?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter the name of the crashed application (Dock) or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them (command-C) to the Clipboard. Paste (command-V) into a reply to this message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

Nokia Wireless Presenter won't launch

Similar Messages

Maybe you are looking for