Nokia won't switch on

My Nokia Asha 201 switches off right after I switch it on.. I was resetting my phone to factory settings and after that it wouldn't switch on anymore but instead it keeps flashing on the buttons. When I try to switch it on it shows NOKIA then it switches off immediately then the buttons start flashing.. How can I solve this? I was also thinking of using Samsung once and for all because my Nokia lumnia is giving me a problem too but for now I need all the data I saved on my Nokia Asha 201

Turn off the phone, remove the battery, and wait like 30 minutes. Then put the battery back in carefully, and try to turn on the phone and see what happens.

Similar Messages

N85 won't switch to silent using # key

Hi all,
Am hoping you can help me - new to Nokias so I'm not sure if this is a common thing...
I've just got a new N85 and it won't switch between general/silent profiles when I hold the '#' key.
It just....does nothing! Only way to switch between modes is through the usual power button route.
Any ideas? Is my phone faulty or is there something I need to switch off/on to activate this short cut key?
Cheers in advance!
Rich

Sometimes operator branding removes this feature. Also, devices manufactured for the Asian market often tie automatic line switching (for SIM cards with 2 lines) to the # key.
If you got your phone from a reputable dealer or online from the Nokia store then you should have a EURO variant of the firmware and this should work as expected. If you got it off eBay or somewhere like that then the chances are that you may have an Asian version that someone has reflashed with European language support without telling you, or that you may even have a counterfeit device. If you got it with a SIM from a UK operator then there's not a lot you can do.
Sometimes, though, this kind of thing can be some kind of software error. There are a few things you can try here...
1) Try a restore factory default settings. Just enter *#7780# from standby and supply your security code when prompted. It'll be the default 12345 unless you've changed it. This won't erase any data of yours, you'll just have to redo your theme, ringtone etc. settings afterwards.
2) If the restore factory default settings thing doesn't work then try a soft reset. This will erase your phone's memory (but not your memory card) so do a backup beforehand. If you have media files that are DRM protected, then use OVI Suite (instead of PC Suite) since that's the only thing that'll back up media activation keys (if you don't back those up then your media will be unusable afterwards). Then enter *#7370# from standby and enter your security code when prompted. The phone's memory will be reformatted. If you do have an imported model that has been reflashed with European languages, this step will make the phone revert to its original language set.
If those don't work then you can always take the phone in to your nearest Nokia Care Point for assessment, but do bear in mind if you got your phone from an operator that what you're describing can be the result of operator branding.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Has anyone had their iphone 4 die on them? Mine is just 2 yrs old and won't switch on, tried all the remedies, reboot, tried to connect and reboot via itunes, new battery--nothing works

Hias anyone had their iphone 4 completely die on them? Mine won't switch on, I have tried using the power key with the home key, tried connecting it via usb cable to itunes, tried new battery- nothing has worked. The phone is just 2 yrs old this month, and I haven't dropped it or anything. I have never had a phone break on me before in almost 20 yrs of having mobile phones- I've had to resort to using a 7 yr old Nokia, which I used to love but it's not the same as my iphone!!

If you have attempted the reset, which is holding the home button and sleep/wake button, was it still connected to the computer? Have you tried to do that when not connected. You stated it never came on, how long did you hold the buttons together? If you cannot get it to connect to iTunes then you would not be able to restore the device. You can see if you can put the device into Recovery Mode by following the instructions in this support document. If that does not work, then you are correct, make an appointment at the Apple Store. If you can't update or restore your iOS device

Nokia 6230i PTT switch failure

I bought nokia 6230i 3 months back. Due to some unknown reason, whenever we power on the set now, it gives the message " unable to switch PTT on, check your stteings" and no SIM is not being detected, hence no service.
Apparently all settings seems ok.
can you give some solutio to this?

26-Dec-2007 03:19 PM
davidw56 wrote:
Hi folks
I have a Nokia 6230i owned from new, used lightly that won't switch on. It worked fine up until now then died.
Charger fine, battery has good volts, connections clean, hasn't seen water, dropped etc.
Any thoughts? It's out of guarantee so wasn't sure if worth repairing.
I noticed that a number of the UK eBay 6230i phones sold as faulty have a 'don't switch on problem'.
Thanks for any help.
rgds David
Maybe switch ?
Pozdrawiam ( Greetings , Grüsse , Baisemains )
Sebastian - NCP POLAND

Lumina 720 - 1 Week Old - Won't Switch On

Nokia Lumina 720 - 1 Week Old. Won't switch on. Battery is fully charged.
Was very impressed with the phone until now - am considering returning it and getting something else.
Grateful for any advice as to how to start it. Or am I wasting my time?
Solved!
Go to Solution.

If you are sure the battery had sufficient charge then try this..Press Power + Volume(down) keys until the phone vibrates (about 8-10 seconds).
If needed leave the phone on charging for about 30 minutes and see if it comes to life on its own. If not try the reset mentioned above again ..
You may also try the procedure mentioned in Message 4 HERE

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

I've been texting my friend with iMessage with wifi on and all of a sudden it changed to text message and won't let me send messages. My wifi is still on and working but it won't switch back to iMessage. Please help

What I recommend you try doing first is to turn iMessage off then back on. If that doesn't work, make sure that your Apple ID and password are correct. If everything seems correct and you still can't send out messages using iMessage instead of text message, I think you should either try calling AppleCare at 1-800-MY-IPHONE (1-800-694-7466) and/or scheduling an appointment at the Genius Bar at an Apple Store (that is, if there's one close to you).
Hope this helps!

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

My safari won't switch off - what can i do?

i opened a page which should have allowed me to download a mock TOCFL exam (that's the standardized chinese exam in taiwan), but instead i just got a page of gibberish and since then skype won't let me close it, also while closing tabs there's no longer an x to click, instead i have to right click and then close it that way. anyone know what's going on here? also since safari won't switch off, i have no way of trying to deinstall and then reinstall it...any suggestions?

Select  ▹ Force Quit... from the menu bar, then select Safari and press return. Do the same with Skype.
Run Software Update and install all available updates.
Reinstalling system components is rarely the solution to any problem, and certainly not to this one.

My iMac20 powers off by itself and won't switch back on

I'm sorry this is a bit of a saga but I'm at the end of my tether with so will be really grateful if anyone has any experience of this issue and can give me some help?
The problem started in May when, after an hour or so of use, my iMac 20 suddenly started to turn itself off and wouldn't turn back on again until the following day. This happened around half a dozen times so I took the machine to the local Apple store and was told that it was probably the thermal trip and if I removed the power cord and left it disconnected for a while, it would power up again more quickly. That evening when it cut out, I followed the advice I was given and removed the power cord from the back of the machine but it made no difference and the machine would not restart until the following morning. Back to the Apple store I went and this time they took the machine in to the workshop; a day or two later I was told that they had cleaned out the fans and tweaked some software and had run it successfully on the bench for several hours with no problem. After paying £49, I collected the machine, took it home, ran it for an hour or so and off it went again and as before, refused to turn on. Back again to the Apple store; "Had I reloaded the operating system?" Well no, because I hadn't been told that I needed to. And anyway why would I... surely the thermal cut-out was a hardware issue? The response was that the problem was definitely software-based and nothing to do with overheating or a faulty power supply unit (which was/is my favourite candidate for villain of the piece). So off home I went, backed up my stuff and ran Disc One successfully and started running Disc Two. After about 20 minutes into Disc Two the machine did its usual trick and powered off, and I went looking for a bottle of wine.
Back to the Apple store. The guy controlling the 'guest list' for the Genius Bar said that if I wanted to return the machine to the workshop that day it would be considered a new incident and there would be a further charge for any repair work. However, if I made a fresh appointment (for a couple of days later) then the work would be done as part of the previous 'repair'. Somebody at Apple really needs to look at the way the stores deal with dissatisfied customers.
So, Saturday the 11th of July arrives and I head back to the Genius Bar for my free appointment. I explained to a very helpful guy that this is my fifth visit and I would like to get to the bottom of the problem. He referred to the tech person who dealt with the original workshop repair and she came out to explain that the issue is caused by 'something' lurking in my Library folder and that if I wipe my hard drive and re-install the OS from scratch but without the Library folder, the problem should be solved.
I spent Sunday wiping the hard drive, running the OS discs and then reinstating my iTunes, photos etc and waiting for the machine to turn itself off - but it didn't! I left my external hard drive returning all my files and documents overnight and when I woke up on Monday, everything was still up and running... bliss!
Then, this afternoon, after downing loading a music file in flac format, I found that it wouldn't go into iTunes without the help of Fluke software. I downloaded the Fluke stuff and then as I dragged the flac file into iTunes - boof! The machine went off and won't switch back on again.
So finally... has anyone seen any similar behaviour with their iMac and was it caused by software or hardware? And if it is software that's causing the problem, why can't I switch the machine on again immediately?
,

Amsys plc, the company Apple uses for off-site repairs returned my iMac20 today and the accompanying advice note states that the fault was resolved by replacing the power supply unit. I am really grateful to Apple for finally getting to the bottom of the problem, particularly as the repair was done free of charge, although I had already paid £49 for a useless workshop investigation at the Kingston store. The service given by Amsys was exemplary... the collection and return of the machine was carried out at the times promised and whenever I contacted the company by phone, each person I spoke to seemed to have knowledge of the repair without having to refer to the case notes (and none of the 'press 1 for service, 2 for sales...' rubbish).
So once again BDAqua, many thanks for suggesting I call Apple... it's just a shame that the staff of the Kingston store refused to accept what was obvious to me.

I've broke my phone, it won't switch on, is there any way to recover the data from it?

My phone has split up the side after I dropped it down some concrete stairs and now it won't switch on, so I need to know if there is anyway to recover the data from it, such as phone numbers, photo's etc. Anyone had this problem?
I've tried plugging it in to the computer but it doesn't do anything, and tried plugging it in to the wall to see if that will switch it on, but nothing.
Any help gratefully received! Steve

If it will not turn on - you have zero chance of getting anything off the phone.

My iphone won't switch on. I've tried holding the power and home button more than 30 seconds up to a few minutes but it didn't switch on and went straight to recovery mode. It died of a low battery and i already fully charged it i checked with my itunes.

i really need help here. I have only used my iphone for a month. my iphone won't switch on. it died of a low battery and i've already fully charged it and usually before it even fully charged, it will turn back on right but in my case nothing happened. i've tried holding the power and home button for 30 seconds and up to 2-3 minutes but no logo appear. it went straight to recovery mode. there's nothing wrong with my cable, i checked with itunes and this happened once a week ago but it did switch back on after i tried a few times but now it just won't switch on. i also have problems with my screen as there's some noises to the screen (i hope you get me) and when i turned the camera on, it was as if the whole screen is shaking. i'm currently studying in the middle east and there's no apple store here so i cannot use my warranty. i will only be back home in summer. please help me what should i do to at least switch my iphone on first.

I did a little bit of experimenting. I have an iPad original versions myself. I took it out of the box knowing that I haven used it in months and I expected the battery to be dead and sure enough the battery was as dead as I imagined it would be. For the first 30 minutes I experienced exactly what you are experiencing, but then the iPad suddenly powered up on its own (like it does when plugged into the charger) and I am using it now to type this response to you.
My point is that I am starting tothink that your battery has suddenly died on you for some reason or you have a hardware problem now. I would still try leaving the iPad charge for a while longer - maybe even overnight - and then try again in the morning. Unplug the iPad and try resetting with the home and sleep buttons. Try plugging the iPad in again. Unplug it, try restarting again. Let it charge for a while again.
After trying something like that, if it still will not start up, then I think it's time for a trip to an Apple Store and see what the Apple Techs think.

I'm new to this! My old mac 0sx 10.2.8 won't switch on. Not sure where to start to fix it? I am totally useless when it comes to computing, can anyone help me please!!

Hi, I am new to this support site so forgive me if I am doing it wrong but I have a problem that I am at a loss as what to do. My (very) old mac 10.2.8 won't switch on..I really only use it for music , there is a vast amount of music stored in it and am heartbroken that it won't even switch on. I have no idea where to start on trying to fix it. Can somebody please help me on where to start on fixing it

You might want to try resetting its power management unit; see the following tech notes:
http://support.apple.com/kb/HT1895
http://support.apple.com/kb/HT1379
The reason I'm suggesting this is that some startup settings are stored and preserved by a tiny battery that lasts about 5 years, inside the computer. When that battery dies, the computer may forget things like what time it is and which disk to start up from. If your Mac is around 5 years old or more, that little battery might be on its way out.
If you can't revive the Mac, don't panic. You can remove its internal hard drive and put it inside a USB/FireWire enclosure so that it can be hooked up to another Mac, and then you can use or copy all of the files and music off of it (assuming the startup problem has nothing to do with the hard drive).

My at@t service won't switch to my new phone

I just upgraded to the new iphone 4s and all the apps info and everything synced but my at@t service won't switch to the new phone?

So why are you posting in an Apple technical support forum? Call AT&T!

My iPhone 4S won't switch to landscape mode

my iPhone 4S won't switch to landscape mode. anyone else have this issue??

LexusB wrote:
Alas, this did not help me. I don't have an Orientation Button or any Icon that would help in this endeavor. At the bottom of my Iphone 4s, there are 3 icons: Phone, Mail and Safari. That's it. I can't get those icons to move.
What is it you're trying to do? If you're looking for orientation lock in iOS 7, swipe up from the bottom of your phone to access control center. Orientation lock is the top right icon.

Ultrabay battery won't switch to main battery and results in sudden shutdown.

Hi,
I just changed my windows 7 32 bit to 64 but version. The power manager version is 3.66 and driver version 1.64, bios version is LENOVO 7UET93WW (3.23 , 12/15/2011). The ultrabay battery drains to zero and won't switch to main battery, which leads to a sudden shutdown without any warning. In windows 7 32 bit version, I don't have such problem. It's annoying. My computer is T400 7147 CTO.
Thanks!
chicagot400

Hi I have the exact same problem. I have a T400 2764 CTO. Changes I have recently made (past 2 weeks): I upgraded to Windows 7 64, added a PC Card media reader, added an express card USB 3.0, a Samsung 256 GB SSD and the Ultra Bay Battery. Everything was working great... both batteries recognized, ran Lenovo Update... Have everything...
Well the battery meter recognizes both batteries (a 4-cell and a 3-cell), combines their life, but it drains the 3-cell first to ZERO... and isn't bright enough to figure out how to switch before abruptly dropping power to the system.
Hopefully like the ATI switchable graphics that had bugs for ages this battery issue eventually gets fixed. Let me know if you figure out any solution. AND LENOVO, if you are reading, try and set it up so that the 2 battery usage maximizes the life of both batteries with whatever controller you put together.
Thanks.
- Tom

Nokia won't switch on

Similar Messages

Maybe you are looking for