Nokia X2 Android: Region list only has non-English...
When setting up the phone the only options for countries on this phone are non-English speaking.
Is it possible to add at least one English speaking country?
Or preferrably a few?
I'm wondering if incorrectly setting the region creates any problems?
Originally my GPS kept defaulting to Moscow... even though it obviously wasn't there?
The butterfly effect
When setting up the phone the only options for countries on this phone are non-English speaking.
Is it possible to add at least one English speaking country?
Or preferrably a few?
I'm wondering if incorrectly setting the region creates any problems?
Originally my GPS kept defaulting to Moscow... even though it obviously wasn't there?
The butterfly effect
Similar Messages
-
Several music albums listed in my IPhone 5 music library are listed multiple times, but each one only has a portion of the songs listed. How can I combine them to make one album?
First....Thank you so much for your prompt reply. I am sorry for not getting back to you regarding your suggestion-I had computer issues that just got resolved. Also, this is my first foray into online chat rooms so I have a lot to learn to precisely state my issue! I did as you suggested and all the songs list the same album when I go into each song's "get info". However, I am not sure how to edit as you suggested. When I downloaded this album originally, for some reason it broke up into several albums each with different songs from the original album. I am trying to consolidate them back into one album in my library. I would greatly appreciate further assistance if you can. Also, I do not use "the cloud" to store any data and would like a good source of info on how to do this. Thanks so much for your patience!
SueZoo -
NGS Sponsors authentication does not work in case user has non-English character in his password
Hi,
we are using the NAC Guest Server v 2.0.1 and have Sponsors authentication done through Radius servers. Radius servers are Microsoft IAS using AD.
Sponsors user authentication works okay in case user's password includes English characters, but does not work in case an user uses national characters like for example Umlauts in German.
On Radius server I can see these error messages:
User XXXX was denied access.
Reason = Authentication was not successful because an unknown user name or incorrect password was used.
As soon as an user changes his password and uses English characters only, it resolves.
I guess this might be that NGS uses different coding while sending a password to Radius server, but not sure.
Appreciate if anyone knows a root cause and what could be a workaround. Unfortunately our AD policy allows users to use national characters and we can hardly change it. So a change on NGS or Radius side would be more viable.
Many thanks for your help.A case has been opened at Cisco and it is now quite clear that it is a problem with coding.
According to Cisco development team NGS uses UTF-8 coding to send the password, of course encrypted, to the Radius server. This cannot be changed within NGS. We use Radius Microsoft IAS Version 5.2.3790.3959 running on VMWare Windows 2003 SP2. More tests are scheduled to be performed. -
Non-english characters on my ipod? and it will only play the radio?
my dad gave me an ipod he bought off ebay for christmas. I had another one but it was lost. so anyway, this one has non-english (chinese or japanese) looking characters, the spinning wheel doesn't spin, and it keeps popping up US radio station. and my itunes won't recongize it. HELP!!!
It's not an iPod. No iPod ever made has a built in radio tuner. Sorry.
-
Problem in converting Spool to PDF file, having non-English characters
Hi All,
I have problem in converting Spool to PDF format.
Scenario : I have a spool which has non-English characters. I am using CONVERT_ABAPSPOOLJOB_2_PDF FM to perform conversion. But my output is having junk values( ie # ) for non-English characters. Any pointers to solve this issue will be appreciated.
I even tried with report RSTXPDFT4 , it also gives me the same junk characters.
Regards,
Navin.Hi All,
I have problem in converting Spool to PDF format.
Scenario : I have a spool which has non-English characters. I am using CONVERT_ABAPSPOOLJOB_2_PDF FM to perform conversion. But my output is having junk values( ie # ) for non-English characters. Any pointers to solve this issue will be appreciated.
I even tried with report RSTXPDFT4 , it also gives me the same junk characters.
Regards,
Navin. -
Filtering out non-English characters
Anyone know of a way to use the Junk Mail filters to filter out email that has non-English characters in the subject line? I get a lot of spam that has either Asian or Russian characters in the subject and body of the email.
Thanks, JimJimbot,
you might want to take a look at Junk Matcher - it allows you to flag mail based on character sets used - it seamlessly integrates with Mail's spam filter - once you have set it up to match your preferences, it should improve Mail's spam filter a lot:
http://junkmatcher.sourceforge.net/
Andreas -
Loading pages with non-English language scripts (e.g., Arabic)
When I try to load a page that has non-English script, specifically Arabic, it just show's up as question marks or weird symbols. How do I get it to show the words but in Arabic or any other non-English script?
Make sure that the correct encoding is selected.
*Firefox > Web Developer > Character Encoding
*View > Character Encoding -
my computer crashed and i had to reinstall intunes. i have 1144 songs plus some playlists on my old 60g ipod. my itunes library on my computer only has the songs that i purchased from itunes and none of playlists. how do i get this content form my ipod back onto my itunes program on my computer.
check out this post by Zevoneer.
-
Quicktime movie only has the first song in the play list. after export
when I export an album to quicktime the quicktime movie only has the first song in the play list. The slide show works in i photo with all songs in the playlist but the quicktime only takes the first song and repeats it over and over
I used the garage band method to string the songs together. Then used the mega song to play with my album. and it even exported to the quicktime movie. Thanks for the post.
-
if a buddy's screename is faded (in the offline section), but a video icon is still next to the screename, and if you right click on the name "video chat" is an option, what does this mean? it is the only one on my whole list that has this.
Hi,
It could be some sort of "flagging" issue where either the AIM Servers have gone out of sync and you are getting two lots of info (There are about three or four servers involved with getting data to your Buddy list)
I can also see the possibility where you have a Contact in your Address Book who has two Screen Names.
You have one in one group and in another they appear to be Off Line. However iChat will still Link them and Show their Capabilities when you Right Click.
One way of checking this is to double click them to open a Text Chat Window.
At the top is the Recipients Bar (See View Menu when Text Chat is Open).
This gives you the option to chose a different Buddy Name if the contact has two (It offers To and From options if you both have Multiple Accounts).
Pic of an Old Chat to someone with Multiple "Names"
They have an @Mac.com name and Jabber ID (As it is an Old Chat the Jabber one is Off Line and their @mac.com name is currently "Away"
You can see I have a Google and three AIM Logins I could use to Speak to them.
9:48 PM Sunday; December 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
Has anyone experienced the iphone 4s camera panorama failure where the panorama stops after taking only one 'non panoramic shot? I think this happens when you switch direction of the panoramic arrow.
Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host> -
My vCard only has 222 contacts but i can't import them to iCloud. I exported them from an android device.
Well, you can try this: right click the file, go down to encode file, and reencode it for the Mac.
Hugh -
The computer I use for Itunes (my laptop) only has XP so I can't use ICloud:(
I have a desktop that operates using with Vista.
I downloaded 10.5 and sought to sync my two iphones and two ipads with the desktop in order to use ICloud. However I got warning messages that if I synced with this computer that had none of my extensive library of apps, music, podcasts, etc. would be on it, I would lose it all.
I did authorize the computer. I knew enough to do that but am terrified that I will lose everything that I have accumulated and still won't be able to use ICloud.
Isn't there a way to do this? Shift my library FROM my devices to the desktop?
ThanksThis is a tedious solution, which is stupid! And some users report an inability to reauthorize a computer after an "en masse” deauthorization. I can’t believe Apple doesn’t provide a list or menu to find out which computers you’ve authorized! Obviously, APPLE knows (or else they couldn’t tell us how many computers we have authorized)--so why can’t they give us access to that information about our own computers??!!!
And for an already-authorized computer with a hard drive that’s since been replaced and upgraded from Mavericks to Yosemite, would it be recognized as a “new computer” and require authorization? Would its previous incarnation (i.e., with the old hard drive and OS) be considered a separate computer? Some users report they can’t authorize a computer after an OS upgrade because of that. Can’t believe we have to do such a bass-ackwards kludge! -
Non-English page numbers/lists
Hello.
I have ID CS4. I am working on a doc that needs non-English (Latin) numbers as the page numbers. The doc has about 2,500 pages, and I do not want to do this manually. I have looked all over the place for a solution and have found nothing even romotely close. Anyone have an idea how to do this? Thanks.
AdamWell, when I've needed to do page numbering using Khmer numerals, or Burmese, or Lao, or etc., I have only used workarounds. (One of 'em is actually a workaround I originally learned from Peter that he mentioned, which I will describe in a bit more detail) They're all bad. A script might be a better idea, but I suggest that you submit a feature request, as will I, because I'm hoping for decent international support by CS8 or so.
1) Use a bad font! You know, like Limon, or some other font that has Khmer numerals mapped onto the Arabic numeral codepoints. That way you can use a page number placeholder on the master page.
2) Your number-list idea is a good one, but InDesign can't just use your number list. What I did was this:
a) Make a list of 300 Burmese numbers in raw text
b) Set up the margins so that the "main text area" was where I wanted my page numbers
c) Make sure that Layout -> Layout Adjustment is off (this is necessary for step e. below)
d) Place the number text file, holding down shift so it auto-flows
e) Change your margins back to your desired settings - the number-containing text boxes should remain where they are
3) Edit a font to put your preferred numeral system. Ugh. I did this for a client, once, in 2007, and I still feel dirty.
4) Feature request to Harbs for more numbering options in World Tools - I haven't tried this one yet but I bet it's your only chance to get Khmer numbering before CS8.
Proof that no. 3 must be doable in one way or another... here's English ID's options in numbering formats:
and in World Tools (CS4)
... so it must be possible. I have found Adobe to be about as responsive as a hunk of marble when asking for properly-implemented multilingual support. Asking Harbs if the numeral options in World Tools can be expanded to include SE Asian script(s) might be your best bet.
As a side note: I know that it's useless, but I can't stop telling people what number systems are actually called.
1 2 3 4 5: Arabic numerals
١ ٢ ٣ ٤ ٥: Hindi numerals
I II III IV V: Roman numerals
sorry, I'll get off my soapbox now. -
Fussy DVD Player; will play Region 0 but plays Region 1 only occasionally.
DVD player has been freezing more of late but I have blamed that on library usage and mishandling of DVDs up to now. Now the problem has worsened to the point that most of the time commercial mainstream movies DVDs (region 1) will not play.
The flat 17" iMac has always been set on Region 1 and never been changed. I used a Region 2 disc just to see if it was recognized like my Region 0, which it was. I have not switched the 17' iMac from Region 1. Apparently commercially produced Region 1 DVDs are more demanding. I upgraded to OS 10.4.11 and the problem remains. However sometimes a Region 1 DVD will play after frequent tries. My thinking is that this may be a hardware issue, like the laser is dirty or faulty, maybe firmware, but not a software one. The 17 " iMac is now five years old and the DVD player has been in use everyday.
Why the difference in playback between Region 0 and Region 1? How come it will recognize a Region 2 disc but only rarely a Region 1? Has anyone else had a similar problem and resolved it? Any suggestions on how to fix a dirty or faulty laser? Is there a firmware fix?
C.J. BeckYou don't say where you are, but I suspect it is the USA?
Your DVD Player is set for the region where you purchased your Mac. Region 1 is the USA, Region 2 is Europe. (Region 0 is non-regional, for the DVDs you make yourself, and has no effect on the following).
You can only change that setting up to five times, after which it is carved in stone for all eternity, as it is embedded in the firmware of your Superdrive. There is no hack for making a Mac multi-regional like there is for stand-alone DVD players.
If you want to play DVDs from a different region to your own, use your stand-alone DVD player and TV, not the Mac!
Maybe you are looking for
-
If I changed my Apple ID password on my iphone then log into itunes on my phone with that new password, would it automatically sync to my laptop or would i need to put the new password into my laptop also? My laptop got stolen so I changed my passwor
-
I'm thinking of purchasing a Mac mini to use as a node computer for Logic Pro 8. Before I can do that, however, I need to install the Logic node on the mac mini and put this in the startup items so the node loads automatically when the Mac mini boots
-
I've recently got a Nokia N80 on Orange. I have a question about the Calendar entries that are displayed on the home screen (the main home screen when you switch on the phone, not the home screen when you select Calendar). The home screen displays on
-
Hi All, I have SCOM 2012 SP1 CU5 and have few questions on Maintenance Mode (MM). 1) I put my 800 agents in MM for 300 minutes and they get into "Not Monitored" state. When I pull all these 800 agents out of MM together they remain in "Not Monitored"
-
FCE viewer does not play smoothly when dragging play head manually.
Any settings I need to be able to scroll through clips in the viewer without it skipping frames? Rendered clips are fine on the canvass. Thanks Greg