NOKIA X2 SCREEN BLANKED AFTER UPDATE

YOMORROW I HAVE UPDATED MY NOKIA X2 AFTER UPDATE IT TAKE A RESTART BUT WHEN IT START ONLY NOKIA APPEARES ON SCREEN SINCE 8 HOURS. IS ANYBODY COULD HELP ME/ THANKS IN ADVANCE

Remove the Battery for a couple of minutes, insert and see if the phone starts fine. Else, you may need to use the Nokia Software Recovery Tool to fresh install the OS at the expense of losing all your data ..

Similar Messages

Computer HP Envy 17 Notebook PC - screen blank after bios Version F.53 update

Computer HP Envy 17 Notebook PC - screen blank after bios Version F.53 update
computer cannot enter BIOS but switches on and screen remains blank.
The power and wifi indicator shows.
Tried removing CMOS battery with no change
Tried removing battery, pressing on button for 40 minutes then starting again still no change

Hi farai, welcome to the HP Forums. If your computer appears to be powering on, but you cannot see the screen it may be a recoverable situation.
This document will help you diagnose the issue, it looks like you have already done Step 1 (hard reset):
Computer Starts but Screen Remains Blank (Windows 8)
If you get to Step 3, the options listed won't work since you indicated you cannot get into your BIOS. In place of Step 3 in that document, you can try to restore your BIOS using this method: Restoring the BIOS
If you get to the end, it says to call HP. If so, it is most likely a hardware issue and you should call support for more options: HP Technical Support, North America 1-800-474-6836. For all other regions click here.
I hope this helps. If you need any more information, let me know.
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Iphone5 screen glitch after update to iOS 8.1.1

my iphone screen glitch after updating to iOS 8.1.1.

You need to be patient. There is no need to post again within minutes of the first post. Try force closing the App Store app and then reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Next, reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Iphone 6 screen frozen after update to 8.1 and i try to restore but dosn't work at all

iphone 6 screen frozen after update to 8.1 and i try to restore but doesn't work at all
now i'm try to restore the iphone but it give me red screen when it start to download the date and stop every things

Same thing just happened to me!

Did not make Nokia PC Suite default after updating...

I didn't chose Nokia PC Suite as my default in USB cable, after updating it..it says "update c0mplete" and my phone suddenly on an empty or blank screen and restarts by itself...after turning it and hears the start up tone..it goes on a blank screen and after 5 sec. it turns off, i didn't kn0w what to do bec. when i do connect the cable to restore the files after updating, it doesnt makes sense coz it still on a blank screen and turn it off again by itself.. =( any one who can help me?please..

Hoping to take advantage of free navigation, I updated Ovi maps. Not free
Not free as in you still have the old maps ?.Or Not free as you do not have a qualifying product .
/t5/Maps-Navigation-and-GPS/Top-Questions-for-Ovi-Maps-3-03-The-Free-turn-by-turn-navigation/td-p/61...
My method of installing latest free maps is .
One check your phone is offered free maps both by model and firmware
Two install new maps software .
Three delete old maps its the cities folder .
Four download the new maps via map loader . He map loader normally deletes the old maps before installing the new maps .
jje

Nokia 1662 Screen blanks

New phone and very cheap. But after about 10 seconds in standby mode the screen blanks, unlike any of my previous Nokia phones. Can't find any way of preventing this happening, rendering the phone useless to me. I only use a phone in silent mode, only receive txts, and want to leave the phone lying about, being able to glance as I walk past to see if a txt has appeared. Am I missing something or does it go in the garbage?
Solved!
Go to Solution.

This is a very simple S30 phone, so its features are limited. I don't have access to exactly the same model, but see if you have this option:
Menu>Settings>Display settings>Backlight time>Extended
This will give you a longer period, but you won't be able to keep the screen on all the time, becase keeping a modern colour LCD screen permanently lit would zap the battery power before you know what has hit you.

Plz plz help nokia 5233 half display after update

i,ve nokia 5233 update in my mobile device with GPRS internet software version v21.1.004(7mb file)and it got half display after updaTE…
any soloution for that.. i update with latest version….
i also try with Nokia Software Updater in my pc and update again software version v21.1.004(120 mb file).
i also try set format(green button+red button+cemera button+set on) but problem is any budy ve any idea so plz
i also try fectory reset.but prob is still.any budy ve any idea so plz plz .
Solved!
Go to Solution.

There have been reported some issues with the 5800 similar to yours, and it seems that the devices affected were devices where the enduser had changed the screen to an non-official one, and after the update the screen was not working like it should.
If you have done a non-official warranty voiding screen change to your device (yourself that would mean), youre for your self.
If that isn't the case, I'm sure it isn't, you will have to seek help at a Nokia care point if you've already done what you've written. The hard reset should wipe your phone memory and set your phone back to "basics". - No need of doing the factory reset move after doing a hard reset as it does less than the hard reset and nothing that the hard reset hasn't done.
Now it seems like you've updated through ota first and then tried to reinstall the fw again. then done a hard reset? - You will need to take it to a Nokia care point as there nothing more we can do for you.
There could be a hardware issue which has just occured at the same time doing the update.
Clicking the "contact us" tab at the top right of this page will lead you to the nearest care point!
Cheers!

Ipad2 screen blank after ios 8 upgrade

Screen blank, used the home and off button, still not working, a faint light comes on and nothing else
- forced to reset factory settings, all data lost, a very upset daughter! all minecraft worlds created now gone!
seems to be acknowledged by itunes but just get screen on ipad to work any ideas?

Here's the list of the most annoying issues that affect me since updating my iPad 2 64GB w/Cellular iPad to IOS 8:
EXTREMELY SLOW - When opening apps, or switching between them - We are talking just the built-in apps. Mail, Safari, Settings....
Extremely slow Wi-Fi AND broadband. The Wi-Fi is the worst though. Horrible. Page load times are 2 to 4x slower than my wife's iPad.
Battery life reduced by at least 25%. Used to make it all day long, now I am having to plug it in.
Heat - It is working so hard that the processor is heating up. That can't be healthy for it, and surely the majority of the power issues stem from this.
Copy/Paste not functioning correctly between browser windows. Oh this is frustrating. I just want to paste the URL of one website I am on to Facebook, for instance. Even though I COPY, it's pasting in info I clipped a earlier in the day to one browser tab, but if I open another one, it will paste the correct information. You never know what you are going to get.
Cannot post a photo to facebook by hitting the camera icon when leaving a reply or making a post (using web browser version)... It starts the upload, then just stops. I *CAN* go to photos, then SHARE it to facebook, but that doesn't allow me to post a photo along with a reply.
Multiple app crashes per day. This I can deal with. It's nothing new, it's just more frequent. Safari and Mail seem to be the major culprits. It wouldn't be so bad except it takes 2-4 seconds to reopen the crashed app. Sometimes as much as 10 seconds.
And that's just the annoying ones....

Nokia 500 - GPRS problem after updating to Nokia B...

Last month after the announcement of update of Nokia Belle to Nokia 500, I have updated the firmware. And it was successfull and it works fine.
But while try to browse the internet in mobile using WAP or Mobile data, I could not do so. There is a problem (Error in opening the page). Before i.e. while using Anna i regularly browsed and it worked fine. after updation only this problem arises. I have checked all the settings and all is looking correct but could not bowsing.
Pls help me.

Hi somebodyx87,
Could you please follow these steps if problem will occur again?
1. Disconnect your phone from PC if connected.
2. Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and Nokia Suite (hopefully) should detect your mobile properly now.
I hope it helps!
Cheers,
Marina
Nokia Suite team
Click on the Star Icon below if my advice has helped you!

White screen problem after updating to 1.1 firmware

My 2G iPod Nano worked fine with 1.0.1 and 1.0.2 firmware but after updating to 1.1 I get white screen everytime I turn it on after longer period of time. Turning the iPod off and then right back on makes it work again. I have done restore 3 times without effect. I even removed the firmware files so that iTunes downloads them again when doing the restore but that didn't work either.
Should I return it or wait for new firmware? Has anyone else had this problem after updating to 1.1?

Disconnect iPod and close iTunes.
Firmware files are in "Documents and Settings\username\Application Data\Apple Computer\iTunes\iPod Software Updates" folder.
You should still have the 1.0.2 files named "iPod_19.1.0.2.ipsw" and "iPod_19.1.0.2.ipsw.signature" in there if have you upgraded from 1.0.1 version.
Remove 1.1 files from the folder so that only those to files are in there.
Disconnect from network (I switched off my wlan) so that iTunes can't download the new version. Connect your iPod and do Restore, iTunes will now use the old firmware files because it can't connect to the internet.
Fujitsu Siemens Amilo M3438G Windows XP

Screen glitch after update to 10.10.3

Hello ,
I'm experiencing screen glitch to my macbook pro mid 2012 13inch after updates to 10.10.3,
Please any suggestions

Reset PRAM. http://support.apple.com/kb/PH18761
Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Start up in Safe Mode. http://support.apple.com/en-us/HT1564
Best.

ZBook 14 - Can't change screen resolution after update

After I installed some software updates the Laptop was suggesting me, my screen resolution went suddenly from 1900x1200 to 1200x720 after reboot, and it doesn't let me change it, not even to a smaller resolution. I am quite frustrated, because I will need the computer next week for visualization works and I really need the display working well.
It doesn't let me change the resolution. The display and graphics drivers are up to date and working properly, according to the device manager. I made a system recovery, but that just made everything worse although the resolution thing worked again, I had to run a startup repair several times before my laptop would boot propery again. This didn't solve the issue, since the display drivers weren't working properly (videos were being visualized very poorly) and even after updating them the computer wouldn't start up again, so I had to made another system recovery and now I am back to the point where I can't change the resolution and is starting to be really frustrating.
Thanks for any help anyone can offer.

Hello @hellmet,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that your notebook computer is not able to change its display settings, and I would be happy to guide you towards a resolution!
I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at:
http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-EliteBook/bd-p/bsc-274
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Apple store/Itunes store went blank after updating iOS 8.1.3 in iphone 6

ITunes store/ Apple store went blank in iphone 6 after updation of iOS 8.1.3

See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708

U920T Touch Screen Problem after updates windows 8.1

After some updates (automatic) the touch screen of my Satellite U920T is off : when I take a look to the computer properties, it said that the computer is not compatible with "touch screen" (something like that) and in the configuration panel i have no options about "touch and stylet". I've uninstall HID elements from the manager : the problem is the same. I have seen that the screen element is a "standard" screen VGA : i think that's not good ! i've made all updates from toshiba (officials) : nothing change ! HOW TO recover the touch screen ! for the time being my satellite U920T is like a satellite laptop and I have bought it (much expensive...) for the touch screen with windows 8 (now windos 8.1) : DOES SOMEONE HAVE A SOLUTION ???
Best regards

Some thoughts.
1. Did you follow these instructions?
How to Update from Windows 8 to Windows 8.1
2. Check this.
Loss of touchscreen after updating to Windows 8.1.
3. I'm curious about the service. Open Services (services.msc) and scroll down to the Human Interface Device Service. Is it started?
-Jerry

Screen blank after Windows login

When I start my computer (Win 7 32 bit on a ThinkPad T60P), I am taken to the login screen and after logging in, my screen goes black. I can still see/move my cursor but the screen is black!
I can start in Safe Mode and Windows loads fine. I've tried updating my graphics driver from the Lenovo site (last update was 2008, so that shouldn't be the issue) - I also attempted to use a previous restore point, although the only point was 24 hrs prior which didn't rectify issue.
I can use Ctrl-Alt-Del and go go task manager, etc - I've tried ending explorer.exe and reloading ... still nothing, still black with my mouse cursor.
Any recommendations, please??

'evening.
You may want to have a careful look at this write-up detailing the use of SFC (MS Windows System File Checker):
http://www.sevenforums.com/tutorials/1538-sfc-scannow-command-system-file-checker.html
I've never had to use SFC, personally, so my knowledge is limited to what I've read of it, but it looks like it can be run in "verify-only" mode. Might be best to try that first to see if it reports anything. Then, you could consider taking a backup before letting the utility modify/fix anything.
Hope this helps a bit.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

NOKIA X2 SCREEN BLANKED AFTER UPDATE

Similar Messages

Maybe you are looking for