Nokia X3 is not getting switch on after flash.

Hi,
I took back of contacts messages and others.. Then click restore factory setting to flash. Then I tried to restore the back up data. That was also done successfully. But soon after the mobile got switched off... When I tried to switch on.. It is just displaying nokia and white screen blinking three times.. Got off.. Please let me know the possible way to switch on my mobile....
Thanks in advance.
spkumar

@spkumar7
Unfortunately with S40 there is very little that you can do, try removing battery for 10 minutes then replacing and re-try; apart from that a visit to a Nokia Care Point is now indicated.
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

My ipad atomatically gets switched off after every 5 mins

From first day only my ipad atomatically gets switched off after every 5 mins and then atomatically gets on after 2-3 mins. is it a hardware problem or some problem in settings? if anybody knows the solution then please let me know....

Is this a brand new iPad2. Did you notice this occurring before you started adding apps? Is this is occurring if you do not have any apps you have started running either active or in the background?
If you have already tried powering off the device, you can try to do a hard reset (Hold down on the sleep and home buttons at the same time for about 10 seconds until the Apple logo appears, ignore the red slider, let go of the buttons.) and see how it runs without starting any apps.
I do not have instructions for doing a restore but that is the only other step that I think of that you can take to resolve a software based problem.
If you are still seeing the behavior after trying most or all of the above, I would suggest taking it in or returning it for service.

Index is not getting picked even after providing hint

Hi All
The index pk_sku is not getting picked even after providing the hints when executing the query.Please kindly give me such recommendations.I am providing the information.
select * from
(select /*+ index(s pk_sku) */
      to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
      t.client_id as CLIENT_ID ,
      t.site_id as SITE_ID,
      tz.time_zone_name as TIME_ZONE_NAME     ,
      t.owner_id as OWNER_ID,
      t.sku_id as SKU_ID,
      t.reason_id as ADJUST_TYPE,
      to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
      t.reference_id as RECEIPT_ID,
      t.batch_id as BATCH_ID,
      t.update_qty as UPDATE_QTY,
      t.lock_code as LOCK_CODE,
      s.description as SKU_DESCRIPTION
from mv_inventory_transaction t
      JOIN timezone tz ON tz.site_id = t.site_id ,
       mv_sku s
where   t.sku_id= s.sku_id
and     t.client_id=s.client_id
and   ( :client is null or :client = t.client_id)
and    ( :site is null or t.site_id in (:site))
and    ( :owner is null or t.owner_id in (:owner))
and    t.code= 'Adjustment'
and   (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and      (:sku is null or t.sku_id in (:sku))
UNION ALL
(select /*+ index(s pk_sku) */
     to_char(t.dstamp, 'YYYYmmDDHH24MI') as sort_1,
    t.client_id as CLIENT_ID ,
      t.site_id as SITE_ID,
                      tz.time_zone_name as TIME_ZONE_NAME     ,
      t.owner_id as OWNER_ID,
      t.sku_id as SKU_ID,
      t.reason_id as ADJUST_TYPE,
      to_char(t.dstamp+tz.diff/24, 'DD/mm/YYYY HH24:MI') as ADJUST_DATETIME,
      t.reference_id as RECEIPT_ID,
      t.batch_id as BATCH_ID,
      t.update_qty as UPDATE_QTY,
      t.lock_code as LOCK_CODE,
      s.description as SKU_DESCRIPTION
from mv_inventory_transaction_arch t
      JOIN timezone tz ON tz.site_id = t.site_id,
       mv_sku s
where   t.sku_id= s.sku_id
and     t.client_id=s.client_id
and   ( :client is null or :client = t.client_id)
and    ( :site is null or t.site_id in (:site))
and    ( :owner is null or t.owner_id in (:owner))
and    t.code= 'Adjustment'
and   (t.dstamp+tz.diff/24) between to_date(:dateFrom, 'DD/mm/yyyy') and to_date(:dateTo,'DD/mm/yyyy')+1
and      (:sku is null or t.sku_id in (:sku))
order by sort_1,2,3,4,5
version = Release 10.1.0.5.0
SQL> sho parameter optimizer
NAME                                 TYPE        VALUE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.1.0.5
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
sho parameter db_file_multiblock_count_read
sho parameter cursor_sharing
SQL> sho parameter optimizer
NAME                                 TYPE        VALUE
optimizer_dynamic_sampling           integer     2
optimizer_features_enable            string      10.1.0.5
optimizer_index_caching              integer     0
optimizer_index_cost_adj             integer     100
optimizer_mode                       string      ALL_ROWS
SQL> sho parameter db_file_multi
NAME                                 TYPE        VALUE
db_file_multiblock_read_count        integer     16
SQL> sho parameter cursor_sharing
NAME                                 TYPE        VALUE
cursor_sharing                       string      EXACTExplain plan
| Id | Operation                              | Name                          | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                       |                               |    56 | 29736 |   345K (1)| 01:09:07 |
|   1 | SORT ORDER BY                         |                               |    56 | 29736 |   345K (1)| 01:09:07 |
|   2 |   VIEW                                 |                               |    56 | 29736 |   345K (1)| 01:09:07 |
|   3 |    UNION-ALL                           |                               |       |       |            |          |
|   4 |     NESTED LOOPS                       |                               |     2 |   984 | 29686   (1)| 00:05:57 |
|   5 |      HASH JOIN                         |                               |     1 |   326 | 26870   (1)| 00:05:23 |
|   6 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
|   7 |       VIEW                             | MV_INVENTORY_TRANSACTION      |    25 | 7600 | 26866   (1)| 00:05:23 |
|   8 |        UNION-ALL                       |                               |       |       |            |          |
|   9 |         FILTER                         |                               |       |       |            |          |
| 10 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |     1 |    67 | 24327   (1)| 00:04:52 |
| 11 |           INDEX RANGE SCAN             | IDX_CODE_CLIENTID_690         | 79681 |       |   518   (1)| 00:00:07 |
| 12 |         FILTER                         |                               |       |       |            |          |
| 13 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |    24 | 2328 | 2539   (1)| 00:00:31 |
| 14 |           INDEX RANGE SCAN             | IDX_CODE_646                  | 9269 |       |    46   (0)| 00:00:01 |
| 15 |      VIEW                              | MV_SKU                        |    37 | 6142 | 2816   (1)| 00:00:34 |
| 16 |       UNION-ALL                        |                               |       |       |            |          |
| 17 |        MAT_VIEW ACCESS FULL            | MV_SKU                        |   335K|    10M| 2535   (1)| 00:00:31 |
| 18 |        MAT_VIEW ACCESS FULL            | MV_SKU                        | 37839 | 1699K|   280   (1)| 00:00:04 |
| 19 |     NESTED LOOPS                       |                               |    54 | 26568 |   315K (1)| 01:03:10 |
| 20 |      HASH JOIN                         |                               |     1 |   326 |   313K (1)| 01:02:37 |
| 21 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
| 22 |       VIEW                             | MV_INVENTORY_TRANSACTION_ARCH |   576 |   171K|   313K (1)| 01:02:37 |
| 23 |        UNION-ALL                       |                               |       |       |            |          |
| 24 |         FILTER                         |                               |       |       |            |          |
| 25 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |     1 |    72 | 19258   (1)| 00:03:52 |
| 26 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         | 36016 |       |   287   (1)| 00:00:04 |
| 27 |         FILTER                         |                               |       |       |            |          |
| 28 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |   575 | 55200 |   293K (1)| 00:58:45 |
| 29 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         |   367K|       | 3466   (1)| 00:00:42 |
| 30 |      VIEW                              | MV_SKU                        |    37 | 6142 | 2816   (1)| 00:00:34 |
| 31 |       UNION-ALL                        |                               |       |       |            |          |
| 32 |        MAT_VIEW ACCESS FULL            | MV_SKU                        |   335K|    10M| 2535   (1)| 00:00:31 |
| 33 |        MAT_VIEW ACCESS FULL            | MV_SKU                        | 37839 | 1699K|   280   (1)| 00:00:04 |
------------------------------------------------------------------------------------------------------------------------when put in sql tuning advisor,It recommended with better plan using indexes
| Id | Operation                              | Name                          | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT                       |                               |    56 | 29736 |   340K (1)| 01:08:01 |
|   1 | SORT ORDER BY                         |                               |    56 | 29736 |   340K (1)| 01:08:01 |
|   2 |   VIEW                                 |                               |    56 | 29736 |   340K (1)| 01:08:01 |
|   3 |    UNION-ALL                           |                               |       |       |            |          |
|   4 |     NESTED LOOPS                       |                               |     2 |   848 | 26900   (1)| 00:05:23 |
|   5 |      HASH JOIN                         |                               |     1 |   326 | 26898   (1)| 00:05:23 |
|   6 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
|   7 |       VIEW                             | MV_INVENTORY_TRANSACTION      |    25 | 7600 | 26894   (1)| 00:05:23 |
|   8 |        UNION-ALL                       |                               |       |       |            |          |
|   9 |         FILTER                         |                               |       |       |            |          |
| 10 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |     1 |    67 | 24352   (1)| 00:04:53 |
| 11 |           INDEX RANGE SCAN             | IDX_CODE_CLIENTID_690         | 79681 |       |   518   (1)| 00:00:07 |
| 12 |         FILTER                         |                               |       |       |            |          |
| 13 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION      |    24 | 2328 | 2542   (1)| 00:00:31 |
| 14 |           INDEX RANGE SCAN             | IDX_CODE_646                  | 9269 |       |    46   (0)| 00:00:01 |
| 15 |      VIEW                              | MV_SKU                        |    37 | 3626 |     2   (0)| 00:00:01 |
| 16 |       UNION-ALL PARTITION              |                               |       |       |            |          |
| 17 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    34 |     3   (0)| 00:00:01 |
| 18 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     2   (0)| 00:00:01 |
| 19 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    46 |     2   (0)| 00:00:01 |
| 20 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     1   (0)| 00:00:01 |
| 21 |     NESTED LOOPS                       |                               |    54 | 22896 |   313K (1)| 01:02:38 |
| 22 |      HASH JOIN                         |                               |     1 |   326 |   313K (1)| 01:02:38 |
| 23 |       TABLE ACCESS FULL                | TIMEZONE                      |     4 |    88 |     3   (0)| 00:00:01 |
| 24 |       VIEW                             | MV_INVENTORY_TRANSACTION_ARCH |   576 |   171K|   313K (1)| 01:02:38 |
| 25 |        UNION-ALL                       |                               |       |       |            |          |
| 26 |         FILTER                         |                               |       |       |            |          |
| 27 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |     1 |    72 | 19269   (1)| 00:03:52 |
| 28 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         | 36016 |       |   287   (1)| 00:00:04 |
| 29 |         FILTER                         |                               |       |       |            |          |
| 30 |          MAT_VIEW ACCESS BY INDEX ROWID| MV_INVENTORY_TRANSACTION_ARCH |   575 | 55200 |   293K (1)| 00:58:47 |
| 31 |           INDEX RANGE SCAN             | QUI_IDX_INVTRANS_ARC1         |   367K|       | 3466   (1)| 00:00:42 |
| 32 |      VIEW                              | MV_SKU                        |    37 | 3626 |     2   (0)| 00:00:01 |
| 33 |       UNION-ALL PARTITION              |                               |       |       |            |          |
| 34 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    34 |     3   (0)| 00:00:01 |
| 35 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     2   (0)| 00:00:01 |
| 36 |        MAT_VIEW ACCESS BY INDEX ROWID | MV_SKU                        |     1 |    46 |     2   (0)| 00:00:01 |
| 37 |         INDEX UNIQUE SCAN              | PK_SKU                        |     1 |       |     1   (0)| 00:00:01 |
------------------------------------------------------------------------------------------------------------------------So ,after checking the recommended plan I tried to execute the query with the hints,even then it is picking up the indexes in the explain plan.So please kindly help in solving the issue
The pk_sku is the index created on client_id and sku_id columns
Thanks
GV

riedelme wrote:
My experience is differernt - hints will be followed if the optimizer determines they will be beneficial and not if they will not, including my current project on 11gR2. The example below (unfortunately only 11gR1) disproves your theory, showing the index hint is followed and that the cost increases by a factor of five.
The most common cases of the optimizer apparently ignoring a hint are due to operator error, the hint is not well formed, or cannot be followed. There are a couple of documented cases where a hint will be ignored - first_rows used in CTAS is one.
Jonathan Lewis writes a lot about it on his blog showing that the optimizer always acts on a well formed hint if it is at all possible.
SQL> create table t (n number not null, c varchar2(1000));
Table created.
SQL> insert into t select 1, rpad('x',1000,'x')
2 from dual connect by level <= 50000;
50000 rows created.
SQL> create index t_ix on t (n);
Index created.
SQL> exec dbms_stats.gather_table_stats(user, 't', cascade => true)
PL/SQL procedure successfully completed.
SQL> explain plan for
2 select max(c) from t where n =1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 2966233522
| Id | Operation          | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT   |      |     1 | 1004 | 1574   (1)| 00:00:19 |
|   1 | SORT AGGREGATE    |      |     1 | 1004 |            |          |
|* 2 |   TABLE ACCESS FULL| T    | 50000 |    47M| 1574   (1)| 00:00:19 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
   2 - filter("N"=1)
14 rows selected.
SQL> explain plan for
2 select /*+ index (t t_ix) */ max(c) from t where n = 1;
Explained.
SQL> select * from table(dbms_xplan.display);
PLAN_TABLE_OUTPUT
Plan hash value: 3231292748
| Id | Operation                    | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT             |      |     1 | 1004 | 7244   (1)| 00:01:27 |
|   1 | SORT AGGREGATE              |      |     1 | 1004 |            |          |
|   2 |   TABLE ACCESS BY INDEX ROWID| T    | 50000 |    47M| 7244   (1)| 00:01:27 |
|* 3 |    INDEX RANGE SCAN          | T_IX | 50000 |       |    98   (0)| 00:00:02 |
PLAN_TABLE_OUTPUT
Predicate Information (identified by operation id):
   3 - access("N"=1)
15 rows selected.

Not getting certain channel after outage

i can not get channel 618 after only being able to get channels 1-49 the day before

does it say not subscribed? can you try the quick fix at www.verizon.com/repair ?

Not getting internet even after connecting to wifi

i am not getting internet even after connecting to wifi. this occured after i tried to connect my i pad mini to a public wifi. i dont know weather it is a coincidence. any solutions??

My problem is solved. Actually i visited the apple autherised service centre. They told it may be because there was too many programs open in the background.the solution was
1. Swipe up with four or five fingers to multitasking and then close them one by one by swiping up with a single finger
2.Reseting the i pad by pressing the sleep and home button simultaneously
the problem was solved on restarting

I do not get an email after password recovery

I do not get an email after password recovery

10/26/13 I have tried several times to no avail today. Oddly, the password was saved under my main email addree to get into the forum but I can not get downloads to download.
Is there an issue with Apple server responding to sending password recovery to my main email address today?

Curve 9360 not getting switched on

Hi All,
I have a BB curve 9360 and just upgraded my software version from 7.0 to 7.0 bundle 2355. I did this since I read in the forum here that upgrading will increase my battery life. I installed it (after hours of download 197MB!! hour:-) ) cleared every thing and installed the fone as a brand new . I then charged it overnight in switched off mode for around 7-8 hours till the indicator turned from amber to green. I swithched it on and it went on to the booting procedure and then suddenly swiched off!! I tried taking the battery out... waiting and inserting it again but to no avail... then I put it on charging and then took out the battery till i get the "no battery" signal on the screen after 30-40 seconds. then i put the battery back and it finally switched on after all the efforts. When it switched on, I was amazed to see that my fone went into "low battery" mode though it has been fully charged!!!! Well, right now the fone is getting charged.... but I am wondering what happened to the whole "charge"? how come it disappeared in seconds?
Wanted to confirm if same thing happned with others as well as I am confused over the whole episode... has my battery conged off? please note that the fone is just 3 months old and I can get the battery exchanged but the issue is how it happened or is it just another issue with the blackberry usage.
Request users to go ahead and comment on this...
Thanks for reading....

Hi and Welcome to the Community!
Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
With the battery inside, connect your BB to the wall charger
Leave it alone for 2 hours, no matter what the LED or the display does
Remove the battery
Wait 15 minutes
Insert the battery
Wait another 2 hours, no matter what the LED or the display does
This has been known to "kick start" some BBs.
It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
Obtain access to a known good and identical BB...use your battery in it and see what happens
The results of this will indicate if it's your BB or your battery that has the problem.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Open Sale Order Value (FD33) not getting diminished even after closing SO?

Hi,
Upon Executing FD33 and clicking the status view for a Customer say XYZ , and then choosing EXTRAS-Open Sale Order . Say the value of open sale orders being shown is 75000. Even after closing the open sale orders (By Selecting VA05 and Putting reason for Rejection), and then also the Open Sales Order value is not getting diminished.
What could be the reason ?
Pls help.
Regrds,
Binayak

Hi Binayak,
As mentioned by you, running of Credit re-org program 'RVKRED77' is the only solution for this problem and it is known problem in SAP.
Some precautions
1. Always run the program in background by scheduling a job.
2. The idle time is around midnight when no user is working on SAP.
3. Some time the job fails as some other program may be updating same tables as this program. In such cases re-schedule the job at different time.
4. You may run the program 'RVKRED88' which will simulate without actual updation of credit values.
Hope this clarifies..
Regards,
Madhu.

Z10 getting switch of after battery level 40%

I was purchase z10 before 20 days now my handset is giving problem that it get switch off automatic when battery level is 40% and if I will take out battery and trying to switch on again it is not working.then I have to put charger for 2 min then it's get on but how come mobile getting switch off on 40% level.<br>Plz let me know what to do.<br>

I faced the problem too...
You should try this... whenever your phone gets switched off at 40% try to keep the out of your phone for an hour then your battery charges from 0%..
I've tried this it worked out for ma phone..!!!

Nokia Store is not working for N8 after Belle refr...

Hi
Nokia N8 After Belle Refresh update the Nokia Store is not at all working
Not able install apps through Store, Try to send rectification steps to
Email id -
Moderators notes: Personal email removed.

Hi paramashivam
Try the resolution provided on this link and this.
If my post helped you, please don't forget to click on the "White Star" and if it resolved your issue click on "Accept as Solution"

Why SO Header not get closed automatically after all SO lines get closed?

Hi all :
Do you know the reason, why some SO Header still as Booked Status, even All the SO lines are already closed ?
If I see the Workflow status the SO Header is in Status = Deferred and Activity = Wait
And I can close it manually if I rewind the Activity in the Workflow, but I want to know why the SOs not get closed automatically.
Thank you in advance
Edited by: Daniel on Jan 18, 2011 8:41 AM

Have you scheduled the concurrent request to use Workflow Background Processor to Process OEOH ? What is the frequency? Has it run after the lines got closed?
Also, check the value of the WAIT attribute in the OEOH workflow? By default, it is set to close headers at the end of month.
For more detail please see Note:141919.1 on Metalink.
Also refer to metalink document # 397364.1 which details how to change the WAIT attributes.
Hope this helps,
Sandeep Gandhi

Capped zones not getting discovered automatically after global zone discovr

On solaris 10.
We have global zones with capped and uncapped zones.
Zones which are uncapped getting discovered under global zone.
But zones which are capped are not getting discovered.
As per all documents:http://docs.oracle.com/cd/E27363_01/doc.121/e27511/ftr_zones_mgmt.htm
All the non-global zones in the selected global zone are automatically discovered
Edited by: vtadmin on Aug 25, 2012 9:46 PM

The most common reason this usually occurs is because the of the shared memory issue with the Sun MC database. Looks like this issue has been passed on to 4.0. Please try doing the following:
When installing a Server in a whole-root Zone, edit /etc/project to set the shared memory setting first.
Change the "default:3:::" entry to look like this:
default:3::::project.max-shm-memory=(privileged,1073741824,deny)
...where 1073741824 indicates a 1GB setting (you may tune it lower). For more details, go here:
http://docs.sun.com/app/docs/doc/819-5418/6n7gk6ilo?a=view
Mostly this is a problem in whole root zones, but sometimes also applies to the global zones.

Not getting alerts even after applied the monitoring policy on user defined group.

Hi,
recently we have installed OEM Ops center 12c for monitoring our oracle servers. I have created a user defined group and applied a userdefined monitoring policy on that group. I have threshold 70% as crtical and 50 % as warning in my monitoring policy.
Some of my servers are having 77% disk utlization and im not getting any alerts for that.
What will be the problem?
When i see the membership of particular group (group -> membership in center pane), im not able to see the monitoring policy name on the monitoring policy column but i have applied policy on that group.
Please help me to resolve the issue.
Thanks,
Veijar

Hi Stijn,
Thanks for the response.
You are right. I was sending personalized iBot to group 'Financial Analyst'. A non-OBI user(Reshmi) belongs to this group.
But still problem has not been completely resolved.Still users in group either Administrator/Financial Analyst not getting alert via mail.
Atleast the users in Administrator group should get alert via mail, since both are defined in rpd.
Now when i send non-personalized ibot to group 'Financial Analyst', All the users other than Reshmi get alert on their dashboard but they don't get alert
via mail.Also Reshmi does not get alert via mail and error file shows error like -
No devices for user: Reshmi.
Now i am not getting the error nQSError: 43001 Authentication failed for Reshmil in repository Star: invalid user/password. (08004)
which i was getting earlier while sending personalized ibot.
I have already defined the Mail tab contents using Job Manager. Also i have selected User Destinations both Interactive Dashboard and Active Delivery
Profile.
Why the users don't get alert via mail? What could be the problem?

I paid for upgrade on iphoto, now i can not get iphoto back after deleting it

i lost up grade on iphoto. now can not get it back. the computer tells me that my mac system needs to be greater than what i have. i need iphoto.

What version of iPhoto? What version of the system? Where did you get the upgrade?

Getting into recovery after flash

I need some help with my rooted Xperia TL. I downloaded cwm recovery for locked bootloadersand it worked the first time by powering off then hold volume down button while pressing the power button. Then I made a back up and proceeded to flash a custom Rom. Well the Rom that I flashed,the WiFi was broken so I tried and tried but could not get it into recovery. I even tried through flashtool and it kept giving me error messages. I tried downloading the flashable cwm and that wouldn't work either. Finally I had to have Sony pc companion repair my device. Now I would like to restore after rooting again and it won't let me into recovery. I tried uninstalling and reinstall of cwm and it still won't work. I don't understand what I'm doing wrong. Every time I try it puts me into safe mode. I would post this on xda but I wanted to terry here first. Help!

I'm moving this thread to Android development. Hopefully you'll get some advices there.
What are your thoughts about this forum? Let us know by doing this short survey.

Nokia X3 is not getting switch on after flash.

Similar Messages

Maybe you are looking for