Nokia X3 - screen's dead, I need to extract the co...
Recently, my X3's screen doesn't work any more, nor do the call buttons. I cant turn it off or on and the only thing that makes me guess that it's still working is that the keyboard lights up any time I slide it open. When I link it to nokia pcsuite the program at first starts working normally, but when I try to access the contacts list, it gives me this error message: "unable to modify USB mode, please modify USB mode from the phone", action that I cannot perform since the screen is dead and the buttons don't work. If they worked, I'd have tried modifying the USB mode blindly (it should be easy, since I just have to press the same button once or twice), but unfortunately I can't.
Accessing the phone from my PC is anyway possible, without using pcsuite: I can access its memory (which is E in my computer) and see these folders: "images", "others", "private", "resource", "Sounds", "sys", "System" and "videos", plus a single file named card_content.cid. Starting from here, can anybody suggest me a way to extract the contacts and save them on the PC? I don't need to put them inside another phone, I just need to have them in a readable format, with name and phone number.
Thanks in advance!
Not sure what you mean by 'Call Buttons'.. but atleast the 'Navigation' button needs to be working to set the proper USB mode. As soon as you connect the phone press the Centre of the Navigation button as if you are selecting something from the Menu and check whether it gets connected in the proper (PC Suite) mode ...Else, it seems a bit difficult to extract the Contacts.
..and this is for Future action (for any new phone that you buy)
1.Back-up your data at regular interval. Especially after you add any important data.
2. Set the USB connection mode to PC Suite as default. (for Nokia X3-00 its thru' Menu-->Settings-->Connectivity-->USB Data Cable-->PC Suite). With this, even if the display is not working but the phone is, then it will get connected to PC where you can Back-up / Sync your data thru' Nokia suite..
Similar Messages
-
i got a problem on my iPod touch 4 and bought it last month. It has an iTunes and usb port in it's screen. Do i need to have the receipt? because I lost it
That screen is asking you to connect the device to iTunes to restore it.
tt2 -
Need to Extract the Data From "0BBP_TD_CONTR_2"
Hi,
I need to extract the data from SRM extractor "0BBP_TD_CONTR_2". I do not have much knowledge in SRM. Can any one give me the steps how can i check the extractor its not like R3. All kind of help will be appreciated.
ThanksNever mind guys i figured it out. Thnaks
-
Sql Query need to extract the Work Flow information from Hyperion Planning
Can Any one give me the sql query to extract the Work flow from Hyperion Planning in 11.1.2.1.
I can extract from the Hyperion Planning but it is not in required format again I need to do lot of formating. I need the information as per the flow structure is showing linke in one perticular planning unit in all coloumn format. Hence only sql query will help me to extract this kind of information. could any one provide the sql query to extract this kind of request.
Thanks in Advance.
Edited by: 987185 on Feb 9, 2013 10:57 PMIf you have a look at the data models in - http://www.oracle.com/technetwork/middleware/bi-foundation/epm-data-models-11121-354684.zip
There is the structure of the planning application tables, have a look at the HSP_PM_* tables
Alternatively you can look at extracting the information using LCM.
Cheers
John
http://john-goodwin.blogspot.com/ -
Need to extract the data from the CRM table : SCAPPTSEG
Hi BW Experts,
I want to extract the Data from CRM Table "SCAPPTSEG" to BW. The dates are stored in UTC Format.So for getting the date in CET format, we have used the Function Module "IB_CONVERT_FROM_TIMESTAMP".
I want to create a datasource for extracting the data from "SCAPPTSEG" table and i need to use the function module for getting the date in CET Format.
Can i achieve this action through Generic Extraction.
please provide me the steps to achieve this.
Thanks,
Shahina.Anot answered
-
27in iMac screen - many dead pixels - need advice!
So I took my 2010 iMac in to get the screen fixed (had greyish smudges behind the glass), and they fixed it without a problem. So I picked up my iMac a few hours ago and as soon as I turn it on I notice 7 dead/stuck pixels (so far). I'm still under apple care until mid-september. Any advice on what I should do to get this fixed? Thanks
Thanks; just wanted to know if it was the same one I had a problem with some years back (and it's not since Bridgeport hasn't been there all that long). In any case, good luck tomorrow - this should not happen. I've learned to have the person accepting it make a note of the condition the computer is in and have taken pics of it. I know that there are some excellent AASPs in that area and one of them does housecalls (free with Applecare) - you can check with Apple if you should need a repair in the future.
-
Screen is dead. Need to access files.
The screen on my MBP is dead. It wont turn on, and I would very much like to access the files.
I havn't turned filesharing on, so I can't access it that way, and turning filesharing on seems to require using the mouse (I havn't found a way using the keyboard).
Any help is appreciated.Hi N,
If you have access to another Mac and a FW cable, try FireWire Target Disk Mode.
Also, see if your MBP's behavior fits the NVIDIA issue.
Message was edited by: tjk -
My screen went dead, I have now got the apple logo and nothing more seems to happen
My ipad screen went blank and I have now got it started again with the start button and the home button. I now just have the Apple logo on the screen and nothing else. I am now charging the ipad. Do you think it will recover?
Hello there, fennell12.
The following Knowledge Base article offers up some great steps for troubleshooting issues with an iOS device not powering on:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
If you continue to receive the Apple Logo on the screen then this article provides additional steps for you:
If you can't update or restore your iOS device
http://support.apple.com/kb/HT1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Old MacBook Pro's screen is dead...
Hey! My old Mac Book Pro's screen is dead (black). Even though the device reacts to the switch-on/off button, the screen stays as it is (black). What should I do?
Note that its battery is also dead and I can work only when my old pal is plugged in…
Thanks & Cheers from Greece!marcialovessteveWill these cracks continue? Why is it happening?
Who knows why unless it is a manufacturing fault. Will it continue- most likely.
https://www.techrestore.com/mac/
http://www.dttservice.com
http://www.myservice.com/macbookpro.html
http://www.ifixit.com/Device/MacBook_Pro
http://www.PowerbookMedic.com -
How to get back to normal screen from Nokia black screen?
Hi, hemangona99. Sorry for the late response. Can you further elaborate on your concern? What do you mean by Nokia black screen? Are you referring to your theme, or the Glance screen? BTW, what's your phone model?
-
Help: need to extract an application from oracle/apex directory
Hi, all!
I worked on oracle10xe and apex 1.3.1 and then messed with partition table a bit so got my windows crashed and I don't believe i'll be able to restore it.
so what i have is an oracle directory from the long-dead windows with apex inside, and i need to extract the applications and the data i was working with somehow.
Any thoughts?
Does anybody knows where does oracle store all its databases and where apex keeps its applications?
oraclexe\oradata\xe\ has some .dbf files in it, will it work if i just write them over in a newly installed oracle+apex?Hello,
At this point, since you can't turn to Oracle Support (since it is XE), then I would suggest asking amongst your colleagues/friends/etc and trying to find a friendly DBA who will try and help you out for a beer or 3.
Depending on how critical your work was, I wouldn't throw away all hope of recovering your database until you've exhausted all the options.
John.
http://jes.blogs.shellprompt.net
http://www.apex-evangelists.com -
Hi,
I have an xml in a blob column and I need to extract the xml resultset into the (specified below) row/column format. So that i created a custom blob_to_clob function for this conversion and extracted below specified xml. Now I am executing the below specified queries for this xml to extract PanelSet, PanelId, Link values & attributes. but the problem is, I am not been able to relate the parent and child nodes or may be not able to identify, who belongs to who (parent--child). for e.g if I extract all link i.e status1, status2 etc of a particular Panel then i am not been able to access its (parent) Panel identification.please suggest me any solution.
--query using
--to extract PanelSet
select
extractValue(value(t),'/PanelSet/@name') panelset_name
from
(Select blob_to_clob(grp_menu) blobval
from OUG
WHERE user_group_seqno =9) c,
table(xmlsequence(extract(xmltype.createxml(c.blobval),'/Menus/PanelSet'))) t
--to extract PanelID
select
extractValue(value(t),'/PanelID/text()') panelid
from
(Select blob_to_clob(grp_menu) blobval
from oug
WHERE user_group_seqno =9) c,
table(xmlsequence(extract(xmltype.createxml(c.blobval),'/Menus/PanelSet/PanelID'))) t
--to extract Panel
select
extractValue(value(t),'/Panel/@id') Panel_id,
extractValue(value(t),'/Panel/@name') Panelname
from
(Select blob_to_clob(grp_menu) blobval
from oug
WHERE user_group_seqno =9) c,
table(xmlsequence(extract(xmltype.createxml(c.blobval),'/Menus/Panel'))) t
--to extract link
select
extractValue(value(t),'/Link/@name') link_name,
extractValue(value(t),'/Link/@type') link_type,
extractValue(value(t),'/Link/text()') link_value
from
(Select blob_to_clob(grp_menu) blobval
from oug
WHERE user_group_seqno =9) c,
table(xmlsequence(extract(xmltype.createxml(c.blobval),'/Menus/Panel/Link'))) t
--XML
<Menus>
<PanelSet name="0_Data center_A">
<PanelID>1-1</PanelID>
<PanelID>1-2</PanelID>
<PanelID>1-3</PanelID>
<PanelID>0-0</PanelID>
<PanelID>1-6</PanelID>
<PanelID>1-7</PanelID>
</PanelSet>
<PanelSet name="1_Data center_B">
<PanelID>2-4</PanelID>
<PanelID>2-5</PanelID>
<PanelID>2-6</PanelID>
<PanelID>0-0</PanelID>
<PanelID>2-7</PanelID>
<PanelID>2-8</PanelID>
</PanelSet>
<PanelSet name="2_Data center_C">
<PanelID>3-2</PanelID>
<PanelID>3-4</PanelID>
<PanelID>0-0</PanelID>
<PanelID>3-9</PanelID>
<PanelID>3-10</PanelID>
<PanelID>3-11</PanelID>
</PanelSet>
<Panel id="1-1" name="Sts">
<Link name="status 1" type="Module">forbidden</Link>
<Link name="status 2" type="Module">/forbidden</Link>
<Link name="status 3" type="Module">/forbidden</Link>
<Link name="status 4" type="Module">/forbidden</Link>
<Link name="status 5" type="Module">/forbidden</Link>
</Panel>
<Panel id="1-2" name="Adm">
<Link name="View 1" type="Module">forbidden</Link>
<Link name="View 2" type="Module">forbidden</Link>
<Link name="View 3" type="Module">forbidden</Link>
<Link name="View 4" type="Module">forbidden</Link>
<Link name="View 5" type="Module">forbidden</Link>
<Link name="View 6" type="Module">forbidden</Link>
<Link name="View 7" type="Module">forbidden</Link>
</Panel>
<Panel id="2-4" name="Position">
<Link name="viewer 1" type="Module">forbidden</Link>
<Link name="viewer 2" type="Module">forbidden</Link>
</Panel>
<Panel id="3-2" name="Administration">
<Link name="inquiry 1" type="Module">forbidden</Link>
</Panel>
<Panel id="3-4" name="Reconciliation">
<Link name="reconciliation 1" type="Module">forbidden</Link>
<Link name="reconciliation 2" type="Module">forbidden</Link>
<Link name="reconciliation 3" type="Module">forbidden</Link>
</Panel>
</Menus>
--Structure
-----Link abc
- Link abd
- Link abe
-----Panel ID 1-1-
- Panel ID 1-2--------link a--z (more than one)
-------- - Panel ID 1-3--------link N...
|PanelSet 0|-
------PanelID 2-1--------link N...
- PanelID 2-2--------link N...
-------- - PanelID 2-3--------link N...
|PanelSet 1|-
------PanelID 3-1--------link N...
-------- - PanelID 3-2--------link N...
|PanelSet 2|- PanelID 3-1--------link N...
--resultset required
Panel_set Panel_id link
0_Data center_A 1-1 Status1
0_Data center_A 1-1 Status2
0_Data center_A 1-1 Status3
0_Data center_A 1-1 Status4
0_Data center_A 1-1 Status5
0_Data center_A 1-2 View 1
0_Data center_A 1-2 View 2
0_Data center_A 1-2 View 3
0_Data center_A 1-2 View 4
0_Data center_A 1-2 View 1
1_Data center_B 2-4 viewer 1
1_Data center_B 2-4 viewer 2Message was edited by:
Sachin.Singhwith t as
(select xmltype(
'... your xml here ...
') as xml from dual),
panel_sets as ( select extractvalue(t2.column_value, '//*/@name') as panel_set,
extractvalue(t3.column_value, '//*' ) as panel_id
from t, table(xmlsequence(extract(t.xml, '//Menus/PanelSet'))) t2,
table(xmlsequence(extract(t2.column_value, '//*/PanelID' ))) t3
panels as ( select extractvalue(t2.column_value, '//*/@id' ) as panel_id,
extractvalue(t3.column_value, '//*/@name') as link
from t, table(xmlsequence(extract(t.xml, '//Menus/Panel'))) t2,
table(xmlsequence(extract(t2.column_value, '//*/Link' ))) t3
select s.panel_set, s.panel_id, p.link
from panel_sets s, panels p
where p.panel_id = s.panel_id
PANEL_SET PANEL_ID LINK
0_Data center_A 1-1 status 1
0_Data center_A 1-1 status 2
0_Data center_A 1-1 status 3
0_Data center_A 1-1 status 4
0_Data center_A 1-1 status 5
0_Data center_A 1-2 View 1
0_Data center_A 1-2 View 2
0_Data center_A 1-2 View 3
0_Data center_A 1-2 View 4
0_Data center_A 1-2 View 5
0_Data center_A 1-2 View 6
0_Data center_A 1-2 View 7
1_Data center_B 2-4 viewer 1
1_Data center_B 2-4 viewer 2
2_Data center_C 3-2 inquiry 1
2_Data center_C 3-4 reconciliation 1
2_Data center_C 3-4 reconciliation 2
2_Data center_C 3-4 reconciliation 3
18 rows selected. -
Need to extract Post to inspection stock field from material master
Hi Guys,
I need to extract the Post to insp.stock indicator from material master QM view for all FERT materials, i have tried with MARC table but no use. Is there any alternative way to download this from the material master?, kindly help me resolve this.
Thanks
S.MuraliI got it from table QMAT.
Thanks
S.Murali -
Need to extract PO's to send third party system
Hi,
I need to extract Purchase orders with the following criteria. I need to extract them based on vendor, Purchase Org and date of creation of PO
1. PO with no GR and IR
2. PO with no IR
3. PO with no GR
I need to extract the PO's as mentioned above as we need to send third party system. Please let me know is there any standard reports available to extract.Hi,
Explore t-code ME2L.
You can filter using the field Selection Parameters to identify those three segments:
Selection Parameters:
GUTSCHRIFT Invoices exist
M-OFFEN Open target quantity
R-ERLEDIGT No open invoices
RECHNUNG Open invoices
W-OFFEN Open target value
WA351 Open issue quantity
WA352 Issue quantity reversible
WE101 Open goods receipt
WE102 Goods receipt exists
WE103 Open goods receipt
WE104 GR blocked stock exists
WE105 GR blocked stock exists
WE106 Goods receipt exists
WE161 Open goods receipt: returns
WE162 GR exists: returns
You can also use the column available in the layout to idenfity if the PO has an invoiced, if its pending, etc..
Kind Regards,
Mariano -
Need to extract MPAN on the basis of AUFNR.
Hi
I working on one Outbound idoc.
The program is triggered by batch program and it will pass "Service order number (AUFNR)". I need to extract the value of field "MPAN"( i.e. "int_ui", "ext_ui" )by passing AUFNR .
please advise.
Vibhor Goyal
Edited by: Vibhor Goyal on Feb 23, 2009 12:19 PMHi Ankit,
You will have to create your own program to do this.
There is no standard way todo this.
Best regards,
Ramki
Maybe you are looking for
-
Update ztable is taking long time
Hi All, i have run the 5 jobs with the same program at a time but when we check the db trace zs01 is taking long time as shown below.here zs01 is having small amount of data. in the below dbtrace for updating zs01 is taking 2,315,485 seconds .how to
-
What can I do about following error: SIGBUS 10 bus error?
Hello, We use iPlanet AS 6.0 SP3 on Solaris 8 In kjs_1_CCS0 I found the following error: SIGBUS 10 bus error si_signo [10]: BUS si_errno [0]: si_code [1]: BUS_ADRALN [addr: 0x6966223b] stackpointer=B72FE880 Inconsistent thread : best efforts att
-
I updated my iMac to Mountain Lion. All the files were deleted. I have Time Machine backups. When I restart the mac pressing Command R to restore it from the backup it shows the previous OS X (Leopard) beside the date of the backup that I want to sel
-
Losing database connections in remote objects
Hi, I have an interesting problem. I have a couple of remote objects that bear database connections. They are pooled in another remote object and provided by registry on request to the client. However, when I check the connections after a while, all
-
Hi All, I have a Sap script which was executing fine .. but since few day i am geeting a problem. The issue is the two text are getting overlapped. Like we have the address of the vendor and some description the bothis working fine if the address is