Nokia X6-00 doesn't detect new V30 Firmware

I have checked software updates on my phone and on OVI suite when I connect my phone to the computer but it insists that my firmware V21.0.0004 is up to date. I know for a fact it is not. Anyone else have this problem?
Solved!
Go to Solution.

How do you know for sure that an update is available..?
Check here..
http://europe.nokia.com/support/download-software/device-software-update/can-i-update
Note that the availability of update depends on Region / Product Code.. Also if the phone is Network Locked then it can be updated only after an approval from the operator..
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Similar Messages

So, are we going to have the new v30 firmware for ...

After talking about new v30 firmware for the N97 we got the v22.0.110 which is good and fixing all the known bugs.
So are we going to have the v30 firmware or not?

as an N97 user I also hope there will be updates , but fear it will be left dead in the water , the severe memory limitations of the phone restrict how much can be done and so I expect it's had it's day Hope I'm wrong , but not very optimistic , hoping Symbian^3 will give the experience I had hoped for !
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Acrobat 9 PRO doesn't detect new HD

How can I avoid having to buy new serial number for Acrobat 9 Pro after cloning and then swapping HD's? Acrobat thinks I've switched machines, but in fact have only changed the HD.

Contact Adobe customer support via phone or chat; they can reset the activation count.

N96 v30 firmware restarts/reboots randomly

Hi.
I updated OTA to the new v30 firmware for my N96 (EURO1).
Now, the phone restarts 3 or 4 times a day, usually when I'm not even touching it (i.e. it's sat on my desk at work and it'll just turn off and then back on again.
It doesn't ask for a PIN / lock code when it powers back up either which it always does when I switch the thing off and on manually.
I've tried the hard reset and reinstall options but to no avail
Anyone got any suggestions (other than throwing it in the river?!)?
Rich.

If you have tried the multi finger reset and a firmware reinstall via NSU to no avail then you have problems
The behaviour you describe is not typical of an N96 with v30 and suggests a deeper problem
If you have a memory card installed remove it and see if the behaviour persists
If it does then look at your installed apps and try removing some of these
Otherwise a Nokia Care point for a warenty repair maybe your best bet

I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer.

Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

New firmware but Creative software doesn't detect Zen To

I installed new firmware (a story in itself) but since then creative software doesn't detect my player. It works fine through Real player (but slow) and Media player but I preferred the creative software. I have installed updated software but still the same. Not much joy as yet from Creative and I have tried troubleshooting which involves sync-ing with Windows media but it just froze most of the time and was incredibly slow. After rolling back Media player 0 I re-installed but same thing happened.Anyone have any ideas?

I have had the same problem. I've tried to update the firmware and now thw PC software does nor recognise the zen. Tried everthing and in the process of seding it back to creative. Anyone any ideas. could be cheaper to buy something else that works longer than 4 months.

I am switching to a new computer. Itunes doesn't detect my ipod

I am swithching to a new computer and iTunes doesn't detect my iPod. I have loaded iTunes on the computer along with all my music and play lists. When I connect my Pod to the system, the computer recognizes it but iTunes doesn't.

OK, I was able to get iTunes o recognize my iPod touch using the following procedures:
http://support.apple.com/kb/TS3716
http://support.apple.com/kb/HT1923
But, I can't sync the iPod to iTunes on the new computer.

Nokia Music (v1.3) doesn't detect my N97 device

Nokia Music (v1.3) doesn't detect my N97 device!! how can i do or how can i trasfer my music from pc to the device?

Can you make sure that the service servicelayer.exe is running in you active service library?
Run > services.msc > find servicelayer.exe make sure it's enabled and running. If it is restart the service whilst the phone is plugged in.
Does that make any difference?

Skype doesn't detect webcam on new windows 8 lapto...

I have a new laptop pre-shipped with windows 8. I installed skype via the skype download page, and after the install I see that it does not detect my webcam.
I go to Tools->Options and skype doesn't detect that any webcam exists on the system.
I've changed the windows 8 webcam privacy settings to allow skype to use my webcam, though I'm not clear if this affects the normal old desktop skype or that new metro skype (I'm not even quite clear if those are two separate applications, that whole metro thing is still just weird and unuseable to me, not sure why I'd ever want skype to take over the whole desktop as it does if you go into it from the metro interface).
There are tons of results for webcams not woring in skype, but after going through many of them they don't seem to cover this case of "skype just doesn't detect the webcam in windows 8".

-Leon- wrote:
the F1/2/3/4/5/6/7/8/9 dont work for me to turn on my webcam please help!
Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

HT3986 my new macbook pro doesn't detect usb driver

During Bootcamp installation, MBP doesn't detect USB driver before/after finishing virus scan checking.
system finder has USB driver directory as the below snapshot, but "NO USB Drive" warning continuously.

During Bootcamp installation, MBP doesn't detect USB driver before/after finishing virus scan checking.
system finder has USB driver directory as the below snapshot, but "NO USB Drive" warning continuously.

Ovi Suite doesn't detect Phone

Well I have N97
Used to have problem 'USB phone parent' driver couldnt be instaled - Just done PC suite cleaner and fixed that problem.
Now its installed driver wise, so 'My computer' sees N97, and phone says its in PC suite mode BUT
Ovi suite doesn't detect it. I tried 'add new device' it still didnt find it.
I can browse it fine through my computer.
And before you say - yes phone is in PC suite mode.
I also just did hard reset of phone

Please follow the steps provided below and check.
Uninstall the following from add/remove
- Nokia Ovi Suite
- Nokia Connecting cable driver
- PC Connectivity Solution
Then go to device manager ( Right Click My Computer-Manage) then ports- Uninstall all the ports which is by name nokia (
there might be multiple entries, but remove them), but please dont remove any other from there which might lead to
malfunction.
- go to C:\Documents and Settings\All Users\Application Data\OviInstallerCache and remove all the sub folders inside that.
For windows vista and windows 7 it will be C:/Program Data/OviInstallerCache
- Restart Computer
- Download and install ovi suite
- Restart computer
- Then connnect the device and wait till all the drivers are downloaded.
- Then launch Ovi Suite connect the device.
This has solved the issue in many cases.
Hopefully this works.
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

Since last update on itunes, my PC doesn't detect any of my devices. HELP!

Since I downloaded the last version of iTunes my PC doesn't detect any of my devices (ipad, ipod, iphone). Have been connecting my devices to the PC, when opening iTunes there is a legend, with the ipod saying that itunes doesnt detect the device to uninstall itunes and reinstall, have done it twice and the problem is still there. Just bought a new ipad and when I connect it to the PC iTunes doesnt detect it. When connecting my iPhone same thing happens, when I try to export the photos to the PC the folder where the photos are suppossed to be has no photos

Hello andreaparra,
Thanks for using Apple Support Communities.
I found the following article that will help you in resolving this issue, where none of your devices are being recognized by iTunes.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
If you get to the part where it asks you to uninstall iTunes, even though you have done it before, be sure to uninstall iTunes and the other components in the order listed.
Take care,
Alex H.

[SOLVED] CUPS doesn't detect USB Samsung ML-2010 printer

Hi. I only speak a little English. Sorry for that.
I have got an USB Samsung ML-2010 printer. Before I used cups-usblp from AUR, and it worked. But it doesn't work now. The cups-usblp maintainer suggests to use cups instead of cups-usblp. Searching with google, it appears that other people don't have problems with this printer, cups, and archlinux. But I do. Cups' web interface doesn't detect it.
Well, this is how are the things now:
$ lsusb | grep Samsung
Bus 002 Device 004: ID 04e8:326c Samsung Electronics Co., Ltd ML-2010P Mono Laser Printer
$ ls -l /dev/bus/usb/002/004
crw-rw-r-- 1 root lp 189, 131 mar 4 09:56 /dev/bus/usb/002/004
$ grep usb /lib/udev/rules.d/50-udev-default.rules
# 'libusb' device nodes
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", MODE="0664"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", IMPORT{builtin}="usb_id"
SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:0701??:*", GROUP="lp"
$ sudo grep SystemGroup /etc/cups/cupsd.conf
SystemGroup sys root lp
$ groups
lp wheel games video audio optical storage scanner power users
$ cat /etc/modprobe.d/blacklist.conf
blacklist usblp
$ lsmod | grep usblp
(no output)
$ cat /etc/udev/rules.d/10-cups_device_link.rules
KERNEL=="lp[0-9]", SYMLINK+="%k", GROUP="lp"
$ cat /etc/udev/rules.d/10-usbprinter.rules
ATTR{idVendor}=="04e8", ATTR{idProduct}=="326c", MODE:="0660", GROUP:="lp"
$ rc.d status cupsd
:: Checking cupsd status [STARTED]
$ pacman -Q cups ghostscript gsfonts gutenprint foomatic-db foomatic-db-engine foomatic-db-nonfree foomatic-filters splix
cups 1.5.2-1
ghostscript 9.05-1
gsfonts 1.0.7pre44-3
gutenprint 5.2.7-3
foomatic-db 1:4.0.7_20110707-1
foomatic-db-engine 1:4.0.7_20110707-1
foomatic-db-nonfree 1:4.0.7_20110707-1
foomatic-filters 1:4.0.7_20110707-1
splix 2.0.0-11
I open http://localhost:631 in my browser, click "add new printer" and I get just "Serial printer #1"
at "local printers". There isn't my printer. I use KDE, and KDE's tool for adding printers doesn's detect it either.
I miss archlinux, but I need to print.
What may be wrong? What may be I am missing?
Thanks a lot for your comments and help.
Last edited by felihommen (2012-03-04 20:33:39)

Solved!
Restarting cupsd didn't work.
But reinstalling cups...
$ sudo pacman -Rdc cups (it is a dependency of kdeadmin-system-config-printer-kde which I had installed)
$ sudo rm -r /etc/cups/*
I realize cupsd is already running:
$ ps aux | grep cupsd
root 1549 0.0 0.1 75548 4080 ? Ss 21:04 0:00 cupsd -C /etc/cups/cupsd.conf
felipe 1690 0.0 0.0 8416 1028 pts/1 S+ 21:13 0:00 grep cups
I kill it
$ sudo -SIGKILL 1549
$ ps aux | grep cupsd
felipe 1694 0.0 0.0 8416 1024 pts/1 S+ 21:13 0:00 grep cups
Ok. Reinstall cups
$ sudo pacman -S cups
Start cups daemon:
$ sudo rc.d start cupsd
Open firefox. Go to web interface, bla, bla, bla.... And it's there!
I feel really silly. It was a fresh install, so I didn't think about reinstalling.
Printed some jobs and worked perfectly. I used the gutenprint driver.
Thanks a lot, pyther. I thought yours wasn't a very useful suggestion, but it really was. I'm so happy. I owe you.

My router RV180 doesn't detect my dsl gateway

I just bougth a RV router but when i logon to the interface to configure it the router doesn't detect internet connection, i connected the ethernet cable port 1 from dsl to the WAN port at the RV180, but doesn't detetct the gateway, need i a cross cable? Because i can logon to the configuration wizard but it seems the router cannot detect the dsl internet connection.

Hello,
Usually a DSL connection will require that the modem be put into bridged mode, and then our device is configured as PPPoE. To configure the modem you would need to speak with the ISP. Some of them call this IP passthrough, one-to-one NAT, or just bridged mode. You may have to ask for a supervisor before they will do this for you.
You will also need to get your PPPoE credentials from your provider. Then you log into the admin page on the RV180, go to Networking >> WAN (Internet) >> PPPoE Profiles. Click on Add and enter the information from the provider. Then switch to the IPv4 WAN (Internet) page and change the connection type to PPPoE and select the profile you just created from the drop down menu.
While you are there you may also want to change your MTU from default to 1472, most DSL connections require this smaller MTU size to work properly.
If you do have any issues with that your new router does come with 1 year of technical support, so you can give us a call and we can help get you setup as well.
Cisco Small Business Support Center Contact Numbers
Please note you would still need to speak with the provider first to get the modem bridged and obtain the PPPoE credentials.
Hope that helps.
Thank you for choosing Cisco,
Christopher Ebert
Network Support Engineer - Cisco Small Business Support Center
*Please mark/rate helpful posts*

Windows 7 doesn't detect my Canon MX850

Hi all,
I have a Canon MX850 printer connected to the network. Unlike other reports in this forum, Windows 7 doesn't detect my printer at all.
I can ping the printer and access it's network configuration page so network connectivit is not the issue (I even disabled the windows firewall, just in case).
Any clues where to go next?
Thanks,
S.

Hi,
Can the printer work fine on other machine on the network?
At this stage, you can refer to the following steps for a test.
1. Plug the printer to the Windows 7 machine directly and install the proper driver. For your reference, I have enclosed the latest driver for Windows 7 below:
Canon MX850 driver
Please Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Is the printer working fine on the Windows 7 machine? If not, please let me know. Otherwise, you can put the printer back and connect it via network again.
2. If the printer still cannot be detected via network, I suggest you remove the original printer on the computer and recreate a new network printer icon.
For more information to access a network printer, please refer to the link below:
File and Printer Sharing in Windows Vista
Thanks,
Novak

Nokia X6-00 doesn't detect new V30 Firmware

Similar Messages

Maybe you are looking for