Nokia x6 no caller name displayed

Hi ,ive just got a nokia x6. I have all my contacts on the sim card. when i get a call the number is displayed but not the name.
does anyone know how i get the name displayed?
thanks
leigh

Found this little gem online when I had the same problem quote:
If multiple contacts have the same number in your contacts list and one of them calls you, your phone has no way of knowing which one is actually on the other end of the line and, quite sensibly, just shows the number instead of trying to "guess" who it really is. Now, most phones can store contacts both in their own memory and on the SIM card. If you have the same contact in both locations then that counts as duplicates and you'll never see that contact's name displayed. The cure for this is to use the phone's built-in search facility and to search for the number in question. If you find it more than once then you'll have to delete all but one occurrance.
unquote:
It worked for me, my problem was I had numbers I called from abroad with the +44 prefix with the persons name and int (for international dialling) i.e. Bill 07....... then Bill Int +447..... this meant that as the phone saw 07 and +447 as the same number it did not know if it was Bill or Bill int calling so just displayed the number.
I just put both the international number and the uk dial number in the same contact under phone and mobile and bingo works a treat.
Hope this helps

Similar Messages

E71 - SUDDENLY: No Caller Name Displays!

Sometime, within a day or so following my first first sync (using Nokia PC Sync) between my E71and Lotus Organizer, I noticed that NAMES for incoming and missed calls from callers already in my contacts no longer display. Only the numbers. Names (per my contacts list) did display before I did the sync to Organizer. Calls dialed from the contact list still show up as names in the log -- however, the same number dialed from the missed calls list or directly from the screen does not resolve to a name. Only a number shows.
I'm really perplexed about this, and highly annoyed.
1) The numbers are NOT/NOT duplicated anywhere in my contacts, and I have NO contacts saved to my SIM card. NONE.
2) Deleting an entry and then creating a new one from the missed call list (using the same number and name for the new entry) doesn't help. Still no name displayed.
3) I've noticed VOICE TAGS which I don't ever recall seeing before I synced - maybe they were there, but I don't recall them. And those little pacman icons do rather catch one's eye.
4) Numbers are not oddly formatted, and in any event, they've not been changed. But something has certainly changed.
I've read the postings on this problem, and the only hope seems to be a complete deletion of my phone-based contacts, with a restore via PC--> Phone from my Organizer contacts list. I'm reluctant to try this, as the problem began with the sync between the two.
This is really pretty absurd.
Any help here, please?

I agree - it certainly looks like some sort of refresh bug or perhaps some sort of bug linking names for contacts from a particular account.
I was having problems resetting my password for my Exchange account so I finally just deleted the whole account and re-added it. When I re-added it, I left my Exchange contacts disabled. A few hours later, I was switching back & forth between my Recent Calls and Favorites (accidentally) and suddenly the names for my Favs were replaced by #'s only. Ditto with my Recents.
After reading your post, I re-enabled the Contacts for my Exchange account and let them sync. Switching back & forth from my Favs & Recents over the next few minutes I began to see my names come back.
I suppose y'all who are having problems could try to delete your account that many of your contacts are linked to and then re-add and allow sync to happen. No guarantees, but it seemed to work for me.

Nokia 5800 XM Caller ID Display

Hi
I have a Nokia 5800 XM and have noticed that on the caller ID display, when making, receiving or whilst on the call, the display shows the Name and Number of the contact who is called/calling. Is there any way which I can change this so that the caller ID only displays the Name of the contact calling as opposed to both?
I've been though the settings, scanned through the user guide and can't find any reference to this...
Any help would be much appreciated.
Regards
younusb

Sorry, I did not observe it in my earlier phones as in all, it must be set to display both...
I think, there is no such option on Nokia 5800 (shame!!!).. but you may try some 3rd party Caller ID applications which may give you what you want... just Google for it..
If you are successful, pl. post your feedback here...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

Called name display over qsig and H323

Dears,
i'm trying to display the caller name when calling from a cisco ip phone to a siemens phone, and vice versa. the siemens pbx is conneced to the voice gateway through qsig.the gateway is configured as h323 on the call manager. Note that the the calling name is displayed in both ways.
Anyone has a suggestion how to display the calling name?
i'm attaching the running config of the voice gateway,
thanks for your feedback,

Hi,
you can find screenshots and debug in attached piece.
here's an extract of the gw config:
voice service voip
qsig decode
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
supplementary-service h450.12
h323
h225 timeout ntf 300
h225 display-ie ccm-compatible
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729br8
voice class codec 2
codec preference 1 g711ulaw
codec preference 2 g711alaw
codec preference 3 g729br8
voice class h323 1
h225 timeout tcp establish 5
h225 timeout ntf 300
h225 display-ie ccm-compatible
interface Serial0/2/0:15
no ip address
encapsulation hdlc
isdn switch-type primary-qsig
isdn timer T310 120000
isdn overlap-receiving
isdn protocol-emulate network
isdn incoming-voice voice
isdn map address *. plan isdn type unknown
isdn supp-service name calling ie 40 cs 0 profile Network-Extensions operation-value-tag local
isdn sending-complete
isdn outgoing ie facility
isdn outgoing display-ie
isdn outgoing ie caller-number
no cdp enable

Issue with recieving long SMS and Caller Name display

Hi,
Im new to the blackberry and have looked around other forums & technical centre and havn't found any way to solve my issues although i did find something about caller id problems.
1) When people send me long SMS i.e over 160 characters long i keep recieving them in separate SMS and it becomes very confusing... i have owned over 7 different phones in the past and this has never been a problem. Is there any way to solve this?
2) Quite often when someone calls me, i only seem to be able to see the callers number and not the Name, this is frustating as i have no idea who is ringing.
Hope you can assist me.
Thanks.

It helps to give ALL the details of yoru device, such as your OS release on the device and your carrier as well.
1. Verizon blocks combined SMS over 160 characters on their BlackBerrys. You should fuss at them. Other carriers don't do this. An alternative for you is the application called "Beyond160", find it in AppWorld.
2. There could be any one of three solutions... Try these:
a. Make sure you set your own country code at Phone Dialer Screen > Options > Smart dialing.
Set your country code in this format: "+xx" where xx = your country code. Some countries have two or three digit Country Codes. Do not place the '+' in your contact's entry.
* In the US, set this Country Code as "+1", and place your loca area code in the proper box (this normally the default setting in a new BB).
b. At the same location, change the National Number Length to the number of digits for your country (since some countries will have less than 10 as set as the default in the BB). Find out the total digits, minus the country code. Do not place the '+' in your contact's entry.
* For example, some countries have a total number to 8 (plus 3 for country code). You would enter "8".
c. You may have "Content Protection" set on your Address Book.
Look at Options > Security > General Settings. Scroll down to Content Protection > Include Address Book = NO.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Calling name in UCCX

Is it possible to set the calling name (display name) when a call is transferred by UCCX script ?

Hi Paolo
No, it's not - CLI/N is a bit of a sticking point with UCCX. IN 10.0 you can set the call so it shows the outside caller's actual number, prior to that it shows the CTI port number. You can never 'set' the name.
Some suggestions:
1) If you are doing a 'transfer' e.g. call redirect step, rather than routing to an agent, and if you have a small number of 'names' (for example, you take calls for 5 menu options, and want to set that on the call e.g. 'sales', 'cs' or whatever)... you can transfer the call to a CTI RP, name the CTI RP 'Sales' (alerting/display name) and then forward that to the intended extension. The receiving extension would then see 'Forwarded for Sales'. Similar for sending to a hunt group..
2) If you are routing to an agent with a select step, you can set a CAD workflow to pop up an alert with the name. Or you could just set Enterprise data and add show it in CAD. It doesn't appear on the handset, but is there on the PC screen, and you have the advantage of being able to set it to whatever you want per call.
Aaron

Calling name presentation cucm

Hi
I have a problem with calling name presentation when a call is transfered from one of my secretaries to another internal user, the original Called Party details are shown on the recieving phone.
This is the secretaries query :- "If I picked up an external call that has bounced from my Manager cathy's phone and the caller requests to speak to someone else (i.e. Jim) as Cathy is unavailable, when I call Jim's extension (without ending my external call) it tells Jim that it is Cathy calling him and not me calling".
So the wrong calling party name is shown (the original called party, rather than the transferor) ?
Thanks
Paul

Hi Paul,
Can you give a try for below settings:
When a call routes through a translation or route pattern, routes to a Call Forward All or Call Forward Busy destination, or gets redirected through a call transfer or CTI application, the connected number display updates to show the modified number or redirected number.
To turn off phone display updates so that the phone displays only the dialed digits, set the Cisco CallManager service parameter "Always Display Original Dialed Number" to true. When this service parameter specifies true, the originating phone displays only the dialed digits for the duration of the call.
You can choose if the name for the original dialed number or the number after translation is displayed using the Cisco CallManager service parameter called "Name Display for Original Dialed Number When Translated". The default setting displays the name for the original dialed number before translation. This parameter is not applicable if the "Always Display Original Dialed Number" service parameter is set to false.
Regards,
Nishant Savalia

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

Can a 7965 display a URI address as the Calling name?

I have a customer that is utilizing URI dialing as much as possible. The TPX endpoints, DX650, and 99XX phones display the URI address of the calling number. But when calling a 7965 from a URI speed dial I do not see the URI address...just to Calling Name and number. Can this be done?
Thank yoU!

I havent done this in the past but I am going to assume that the 7965 is a SCCP phone and you might have to migrate it to SIP to get that info.

Calling name don't displays on agent's phone

Hello, i've an issue,
we have 5 agents with Cisco UCCX 7 (Premium).
when these is an incomming call, first of all they see CTI route point and when the call handled, agent see just calling phone number, but not name.
Is it possible to make that an agent could see calling name and not cti route points
thank you

The phone will always display the CTI port information until they answer the call on their phone. This is not configurable. They can view the ANI on CAD however.
For caller ID name, CCX does not retain this information so this will not be seen when the call is transferred to the agent's ICD line from the CTI port.
Changing either of these behaviors would require a product enhancement request with your local Cisco AM.

Sony mw600 dont display music id and caller name

I am usinh sony mw600 with my phone (huawei mate android 4.2.1) and the headphone dony show the track id ornthe caller name, please help

Some Android phones does unfortunately not support sending this information to a bluetooth headset and in this case you can usually only see the number when someone calls you.
I recommend that you contact Huawei to see if they are aware of this.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Caller name and number not displaying on my iphone 4s

Caller name and number not appearing on my iphone 4s..

Hello mukundaniyengar,
We've an article that provides a few additional troubleshooting steps that may help get your iPhone's speaker working again.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen

E52 BT caller name order

I'm having a problem with caller name and phonebook display when using E52 with Audi Bluetooth MMI - the order of first and last name is reversed, so the car display shows LAST, FIRST instead of FIRST LAST. The interesting thing is the good old 6300 works fine. Is there anything I can do (besides editing all contact entries)?
Thanks!
Message Edited by jure on 16-Nov-2009 10:06 PM

Check for duplicates in the contact list.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Lumia 920 say caller name

say caller name when you get call on wp8 lumia 920 and rest
One of most missed feature from Symbian in my nokia Lumia 920 is saying caller name along with ringtone when I get call...have been using Symbian for so long I use to know who is calling me even if phone is far on table... If this feature dont need hardware plz bring it on wp8 or wp8.1 of same specially on Lumia 920 ...#nokia setting custome ringtone is not solution even my nokia 6600 had it.... Besides v cannot think of setting custome tone for 200-300 people in oye contact list
vote for it here plz
http://windowsphone.uservoice.com/forums/101801-feature-suggestions/suggestions/5738612-say-caller-n...

This feature is already available...but only in some regions as mentioned HERE

Nokia E52 Message Sender Name Field is not updated...

Nokia E52 Message Sender Name/Field is not updated automatically on Firmware 054.003!
Issue 1: Message Sender Name/Field is not updated automatically after changes made in contacts.
e.g. Message send by Mr. A is displayed in inbox, however when same contact changed to Mrs. AB in contacts does not update sender name/field inside inbox. Sender name remains Mr. A physically on handset. However the changes made to contacts and Message Sender Name/Field is updated automatically on use of Nokia PC Suite 7.1.60.0 and Nokia Ovi Suite 3.0.0.290 but not on phone.

Thanks for sharing the answer here, it is really helpful for others with the similar issue.
Qiao Wei
TechNet Community Support

Nokia x6 no caller name displayed

Similar Messages

Maybe you are looking for