Nokia XL storage definition and how to clear the p...

Hello Nokia Team & Nokia Fans,
I have a Nokia XL but do not understand the various kind of memories in the phone. My phone has an 8 GB micro SD card inside. What the different among Internal storage, Phone storage and Memory card when I go to Setting/storage?. I found the Phone storage at Setting/storage has the same amount with Memory card at Setting/Apps/Manage apps/Memory card. What will happen if I use Clear phone storage function?
Attachments:
Nokia XL.jpg ‏33 KB

Memory Card is your external SD card that you manually inserted.
Internal and Phone are the two 2GB + 2GB internal storage built into the phone. Both are mojorly the same, but one carries the base OS and the other keeps the other internal file system of your phone.
I don't have a solid clue with what happens if you clear the phone storage, but the general underthings says that it will clear all that you have installed on your phone. i.e the Apps and other downloaded files that reside in the phone memory will be wiped.

Similar Messages

Storage space and how to delete the "upgrade"

how do you delete the "other" that is on the touch that you have no plans on paying for. Here Apple is enjoying the sales of there product in the 4th quarter and then when they get into the 1st quarter, along comes this "upgrade" for all those sales they already have. You haft to love the person that timed this release.
Message was edited by: sahdrob

nope, not my email, the upgrade where the "new" items are put on the touch but cant be used until you pay for them, which i am not going to do. How do i delete them so i get 99.4 MB of my drive back.

How to clear the open documents in case if document currency and local curr

Hi,
Can anyboday advise how to clear the open document of a particular vendor for a particular company code. Here the issue is that balace is netted to Zero in the document currency but not in the local currency. The document was posted in Currency CAD and the local currency is GBP.
When i check the FBL1N, there is it showing net balance is ZERO, but document is still in open
status. I tried using Transaction code F-44, but it is not allowing me.
Can anyboday advise how to perform this. Points will be awarded.
Regards,
Sree.

Hi,
In the Company code global parameters(OBY6),select the check box "NO FOREX RATE DIFF.WHEN CLEARING IN LC"
and try clearing again.(You can have a F1 help on the check box to see what exactly it is).
Hope this will resolve
Assign points if useful
Thanks
Aravind
Edited by: Aravind Aitipamula on May 22, 2008 1:36 AM

Where and how to find the storage locatation for the consignment stock

where and how to find the storage locatation for the consignment stock (customer stock ) for more than one storage location .
table :msku
material no    -   werks - batch
xxx                   sg11 - 200352ac
table : mchb
material no    -   werks -lgort - batch
xxx                   sg11   sg10   200352ac
xxx                   sg11   gs11   200352ac
note : each stock location having same batch no in different storage and my question how to find which link for msku to mchb .

Hi,
Try the table MARD: Storage Location Data for Material, where in the field LABST will give the stock field, against a given material/plant/Storage Loc.
Regards,
JLN

I want to know how to clear the text area by the push off my next question button and ask a new ques

I want to know how to clear the text area by the push off my next question button and ask a new question - also I want to know how to code in my project to where a user can enter a math question in one border container and the answer enters into the next container
heres my code so far
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
               xmlns:s="library://ns.adobe.com/flex/spark"
               xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600" backgroundColor="#1E5C75">
    <fx:Script>
        <![CDATA[
            protected function button1_clickHandler(event:MouseEvent):void
                //convert text area into labelid to be identified by actionscript
                richTextLabel.text = myArea.text;
        ]]>
    </fx:Script>
    <fx:Declarations>
        
    </fx:Declarations>
    
    <s:BorderContainer borderWeight="7" x="28" y="10" width="200" height="138">
        <s:layout>
            <s:VerticalLayout paddingTop="10" paddingBottom="10"
                              paddingLeft="10" paddingRight="10"/>
        </s:layout>
        
        <s:TextArea id="myArea" width="153" height="68"/>
        
        <s:Button width="151" label="ask a question" click="button1_clickHandler(event)"/>
    </s:BorderContainer>
    
    <s:BorderContainer borderWeight="7" x="509" y="10" width="200" height="138">
        <s:layout>
            <s:VerticalLayout paddingTop="10" paddingBottom="10"
                              paddingLeft="10" paddingRight="10"/>
        </s:layout>

        
        <s:Label id="richTextLabel" width="153" height="68"/>
        <s:Button width="151" label="next question" click="button1_clickHandler(event)"/>
    </s:BorderContainer>
    </s:Application>

This is a user to user support forum. We are all iphone users just like you.
You are not addressing Apple here at all.
This is an odd way to ask your fellow iphone users for help. Berating oterh users will not help you.
"it's too fragile"
No it is not. i have never damaged one, nor has anyone I know.
" U loose data when Ur phone is locked"
No you don't. Why do you think this?
"and there is no customer support!!! "
Wrong yet again. Apple has an 800 number and they have many retail stores and they have support articles that you can access using the search bar. Or you can contact them throgh express lane online
"but I will go back with Blackberry "
Please do.
Good ridance

How to clear the alertlog and trace file?

since the database was created,the log and trace file have't been cleared.how to clear the alertlog and trace file?3tx!!

Hi Friend.
You can eliminate all the files ".TRC" (trace files) to purify the directory BDUMP. These are not necessary files in order that the Oracle Server works.
The file Alert.log is a file that the Oracle Server can recreate if you eliminate it. When Oracle Server's process realizes certain action (for example ARCH), Oracle creates again the file (if it does not exist), or it adds text (if it exists) with the new income.
It can happen, that appears some Bug if the file Alert.log does not exist. Though this is slightly possible.
Anyhow I recommend to you in UNIX to use from the prompt: $> filename in order to take the size of the file to 0 bytes, without need to eliminate it. Is the same thing when you want to purify the listener.log, the sqlnet.log or the sbtio.log.
I wait for my commentaries you be of great help.
Bye Friend...

Why does camera roll take up all my storage data and how do i get it free for space

why does camera roll take up all my storage data and how do i get it free for space

You might be able to re-enable it via this page : http://appleid.apple.com, then 'reset your password'
You might then need to log out of your account on any iOS devices that you have by tapping on your id in Settings > iTunes & App Store (Settings > Store on iOS 5 and below) and then log back in so as to 'refresh' the account on them
If that doesn't fix it then you might need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

HT1386 What is "other" in the storage category and how do you reduce that amount?

What is "other" in the storage category and how do you reduce that amount?

A ' Large Other ' usually indicates Corrupt Data...
First Try a Restore from Backup... But... if the Large Other Persists, that is an Indicator of Corrupt Data in the Backup... Then a Restore as New is the way to go...
Details Here > http://support.apple.com/kb/HT1414

What is the types of file store in item Other in Hard disk and how to clear them up for more space

What is the types of file store in item Other in Hard disk and how to clear them up for more space.
Thank you in advance for helping..

See here for answer about the OTHER which is taking up space:
http://pondini.org/TM/30.html
and here:
http://pondini.org/OSX/DiskSpace.html
See Kappys excellent note on the rest of “other” files taking up your space:
What is "Other" and What Can I Do About It?

How to clear the open items and parked items for customer

Hi Experts,
I need to clear the open items and parked items for customer.
So any one could let me know the transaction code and procedure for clearing the items for customer.
Best regards,
Kesava balaji.

Hello,
Parked items will have NO RELEVANCE, unless you post it.
You CANNOT clear parked items.
You can clear the posted items using F.13 or F-32
Regards,
Ravi

How to clear the text in the Text Editor

Hi all,
I created a Text editor and also i am having language field in the screen.
whenever i change the language auomatically the text has to change when the text exists for that
language.
this is working fine, but when the Text exist , the text editor should be blank.
But it is carrying the Previous editor text itself into it .
How to clear the text in the Editor.
Regards,
Madhavi

Hello Madhavi
The simple report ZUS_SDN_TEXTEDIT_CONTROL shows how to switch the texteditor contents when changing the language.
*& Report ZUS_SDN_TEXTEDIT_CONTROL
*& Thread: how to clear the text in the Text Editor
*& <a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="1145272"></a>
*& By default the itab GT_OUTTAB contains texts in DE and EN.
*& To switch the language directly enter into the command window:
*& LANGU=DE, LANGU=EN or LANGU=FR
REPORT zus_sdn_textedit_control.
TYPE-POOLS: abap.
TYPES: ty_t_text     TYPE TABLE OF as4text
                     WITH DEFAULT KEY.
TYPES: BEGIN OF ty_s_outtab.
TYPES: language TYPE spras.
TYPES: text     TYPE ty_t_text.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab    TYPE STANDARD TABLE OF ty_s_outtab
                      WITH DEFAULT KEY.
DATA: gt_outtab       TYPE ty_t_outtab,
      gs_outtab       TYPE ty_s_outtab.
DATA: gd_language     TYPE spras.
DATA: go_docking      TYPE REF TO cl_gui_docking_container,
      go_textedit     TYPE REF TO cl_gui_textedit.
DATA: gd_okcode       TYPE ui_func,
      gd_repid        TYPE syst-repid.
START-OF-SELECTION.
PERFORM fill_texts.
gd_language = syst-langu.
PERFORM init_controls.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
    EXPORTING
      repid                       = gd_repid
      dynnr                       = '0100'
*      CONTAINER                   =
    EXCEPTIONS
      OTHERS                      = 4.
IF sy-subrc NE 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM set_text_editor.
* NOTE: dynpro does not contain any elements
"       ok-code => GD_OKCODE
CALL SCREEN '0100'.
* Flow logic of dynpro (does not contain any dynpro elements):
*PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
*PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*&      Module STATUS_0100 OUTPUT
*       text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'. " contains push button "DETAIL"
* SET TITLEBAR 'xxx'.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Module USER_COMMAND_0100 INPUT
*       text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
CASE gd_okcode.
    WHEN 'BACK' OR
         'EXIT' OR
         'CANC'.
      SET SCREEN 0. LEAVE SCREEN.
    WHEN 'LANGU=DE' OR
         'LANGU=EN' OR
         'LANGU=FR'.
      PERFORM get_text_editor.
      SPLIT gd_okcode AT '=' INTO gd_okcode gd_language.
      PERFORM set_text_editor.
    WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form FILL_TEXTS
*       text
* --> p1        text
* <-- p2        text
FORM fill_texts .
* define local data
DATA: ld_string   TYPE string.
gs_outtab-language = 'EN'. REFRESH: gs_outtab-text.
ld_string = 'Good morning'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'DE'. REFRESH: gs_outtab-text.
ld_string = 'Guten Morgen'.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
gs_outtab-language = 'FR'. REFRESH: gs_outtab-text.
ld_string = space.
APPEND ld_string TO gs_outtab-text.
APPEND gs_outtab TO gt_outtab.
ENDFORM.                    " FILL_TEXTS
*&      Form INIT_CONTROLS
*       text
* --> p1        text
* <-- p2        text
FORM init_controls .
CREATE OBJECT go_docking
    EXPORTING
      parent                      = cl_gui_container=>screen0
*      repid                       =
*      dynnr                       =
*      side                        = dock_at_left
*      extension                   = 50
*      style                       =
*      lifetime                    = lifetime_default
*      caption                     =
*      metric                      = 0
      ratio                       = 90
*      no_autodef_progid_dynnr     =
*      name                        =
    EXCEPTIONS
      cntl_error                  = 1
      cntl_system_error           = 2
      create_error                = 3
      lifetime_error              = 4
      lifetime_dynpro_dynpro_link = 5
      OTHERS                      = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CREATE OBJECT go_textedit
    EXPORTING
*      max_number_chars       =
*      style                  = 0
*      wordwrap_mode          = wordwrap_at_windowborder
*      wordwrap_position      = -1
*      wordwrap_to_linebreak_mode = false
*      filedrop_mode          = dropfile_event_off
      parent                 = go_docking
*      lifetime               =
*      name                   =
    EXCEPTIONS
      error_cntl_create      = 1
      error_cntl_init        = 2
      error_cntl_link        = 3
      error_dp_create        = 4
      gui_type_not_supported = 5
      OTHERS                 = 6.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " INIT_CONTROLS
*&      Form SET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM set_text_editor .
BREAK-POINT.
CLEAR: gs_outtab.
READ TABLE gt_outtab INTO gs_outtab
       WITH KEY language = gd_language.
CALL METHOD go_textedit->set_text_as_stream
    EXPORTING
      text            = gs_outtab-text
    EXCEPTIONS
      error_dp        = 1
      error_dp_create = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " SET_TEXT_EDITOR
*&      Form GET_TEXT_EDITOR
*       text
* --> p1        text
* <-- p2        text
FORM get_text_editor .
CLEAR: gs_outtab.
CALL METHOD go_textedit->get_text_as_stream
    EXPORTING
      only_when_modified     = cl_gui_textedit=>true
    IMPORTING
      text                   = gs_outtab-text
*      is_modified            =
    EXCEPTIONS
      error_dp               = 1
      error_cntl_call_method = 2
      OTHERS                 = 3.
IF sy-subrc <> 0.
*   MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*              WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
MODIFY gt_outtab FROM gs_outtab
    TRANSPORTING text
    WHERE ( language = gd_language ).
ENDFORM.                    " GET_TEXT_EDITOR
Regards
Uwe

How to clear the cookie in midlet before quite the midlet?anyone?pls

i am fresh in J2ME . Can anyone teach me on how to clear the cookie in midlet before i quit from it?
I designed an application that require login and use session(cookie) management, i need to clear the cookie before or during i quit the midlet, so that the user will need to login again after quit from midlet. Can anyone pls assist me? i need it urgently!

I designed an application that require login and use session(cookie) management,How did you implement the cookies. This isn't a built-in part of J2ME. You have to implement it yourself (saving the cookie and resending it in future requests), so only you can know how to delete it.
shmoove

How to clear the variable value in session store?

I'll try to build form for search. There are LOV and
search button on form. When user don't select anything then push
search button, I'd like the report to show query everything. I
mean the report will show like condition where id like '%'.
And I send variable between form to report by using session
store.
I select nothing in LOV but value that return by LOV is
not null. It's in stead of old value of LOV.
Please tell me.. How to clear the variable value in
session store? I'd like to set it to null. If you have greater
way to do like this, please tell me.
Thank you.

Please suggest on this..
Thanks.

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itunes

I have 100 songs on i pod touch. But when i connect it to itunes it only showed 44 songs. What is actually happening and how to fix the problem so that all music in my iphone can be seen in my itune

If they are iTunes purchased music then go to Settings>iTunes and App Store and turn off Show All.
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

How to clear the line items...

hello friends,
I am not able to clear line items with F.13 transaction for special G/L Account..i am inputing the values with the Transactions F-48 and F-43(In each transaction v have assigned the same assignment (BSIK-ZUONR)) line items has to be cleared based on Assignment....we can view the details in Tr.code-FBL1N.
Can any one help me...plzzz
vamshi

Hi PK,
1. Should we maintain OIM for all Excise G/Ls (BED, ECess, SHECess)?
- Please DO NOT maintain OIM on BED, ECESS and HECESS, only to be maintained for Cenvat Clearing Account. Also note that clearing of Cenvat Clearing is not easy, as in standard SAP, the assignment field is not updated with the same information for the Dr. and cr. line items of Cenvat Clearing Account. You need to use an exit in Substitution for it to populate the P.O. no. and line item at the time of MIRO.
2. How to clear the BED Excise GLs which is with OIM in our system, it is thru F.13 only?
You can use F.13 only if the entries are matching not otherwise, else clear all of them manually if you have good control of your account balances.
3. Can we activate or deactivate OIM any point of time, I mean can it be activated in case the G/L balance amount is not ZERO?
OIM activation for a GL - Refer Note No.1356457.
OIM Deactivation : You can deactivate OIM after making the balance Zero on that Account and by changing the Message No. FH 190 to warning in OBA5.
4. What is the use of T Code J2IUN, I have gone thru the SDN links, but I am not able to execute the screen. What parameter should we select while executing J2IUN, when we use Pay cenvat from ser tax cr and Pay ser tax from cenvat cr.
J2IUN is to utllize Excise Duty. The liability of Excise duty is utilized from Excise balances of BED, PLA , Service tax etc.. as per business requirements.
Hope this helps you.
Regards,
SAPFICO

Nokia XL storage definition and how to clear the p...

Similar Messages

Maybe you are looking for