Nokia XpressMusic 5130c-2 start up problem?

I have Nokia XpressMusic 5130c-2.When I try to switch the phone it starts,shows the "Nokia boot screen"and  then the screen is white and Nokia won't start.Possibly the start up files are missing or it has a virus.I don't know.
Can anyone tell me how to format the phone or how to boot normally.Thankyou.

Adding to Farby's answer, also try booting it up without the Memory Card and the SIM Card. If it doesn't then it might need its firmware to be re-flashed. Just as farby said, you'll be needed to visit a Nokia Care Center in that case.

Similar Messages

  • Start up problem Nokia 2520

    Hi,
    My 2 weeks old Nokia Lumia 2520 has a start up problem. When I switch on the phone I only see a blue screen with an unhappy smiley face :-(
    The battery is fully charged and I tried holding the 'power on'button for 10 seconds, but it doesn't work. Anyone knows what to try next?

    I tried holding the 'volume down' and 'power on' buttun simultaniously, but it is still not starting properly. Now I am getting an exclamation mark....

  • Start-up problem with my Nokia 6630 series

    Hi everyone! I'm new in the community. Please could anyone help with a problem I have with my 6630. I had just finished charging it and when put it on and tried to access an sms that came in the inbox was not accessible! Then I switched the phone off and later put it on only to get a shocker message which read -" phone start-up failed. Contact the retailer". I contacted the retailer who suggested I that the phone should be switched off again and later switched on. I have done this for the umpteenth time without success! Any one with an idea on how to solve this problem please. I will appreciate your urgent help. Thank you all.

    Dear friend, the start-up problem I had with my nokia 6630 has been solved! I switched off the phone, removed the memory card and powered on. The phone to my surprise came alive. I switched it off again and reinserted the memory card before switching on again and lo and behold, my 6630 was up and kicking again! if anyone should have a similar problem, he of she should try what I did, i hope it works for others in similar situation.
    Cheers.
    so4so

  • Nokia n8-music player starts automatically

    Dear Nokia Team,
    I have Nokia N8 nd i m having problem in it dat when ever i m typing a msg in create msg then automatically my music player starts..
    plzz help me out of dis..

    rayhipkiss wrote:
    deepak_kondal wrote:
    Dear Nokia Team,
    I have Nokia N8 nd i m having problem in it dat when ever i m typing a msg in create msg then automatically my music player starts..
    plzz help me out of dis..
    Do you mean the actual music app or an mp3 track starts playing? The only thing I can think of is that you have an mp3 set as a notification and that is what is happening here. You are receiving a notification.
    Ray. 
    dat? dis? Dear me! It's fortunate that I could understand that query at all.
    Just to confirm that this chap is not going mad though, I have experienced the same problem too where the music player opens up of its own accord. It's happened a few times when I've been responding to a message. Very odd behaviour but I've simply closed the application and got on with my life. I guess it's a bug which manifests itself under specific conditions.

  • Nokia 5800 express music monitor "screen" problem

    hi all,
    i've a nokia 5800 device and i've faced a very serious problem:
    when i lock the phone and unlock it the monitor or screen dont appear as previous normally, instead of that shaked colored lines appear, so i can't see who is calling. But the touch is working normally so i can play music or answer calls but without knowing who is calling.
    if i switch the phone off then switch it on i see the the screen normally, and when it locked then unlocked the same problem appears again.
    i've tried to solve the problem by formatting the device but it is no use
    the same problem faced my frien
    i don't know what to do, please give me a hand......
    Solved!
    Go to Solution.

    I've been having a very similar problem with my nokia 5800 expressmusic.
    it started off like yours but then the screen went fully black.
    the green, white and red buttons at the bottom work so does the small touch button at the top right.. those lights always come on when i unlock the phone so they're fine.
    I know that my phone is still working because i was randomly touching the screen when the phone was unlocked (even though i cannot see anything on it) and i ended up calling somebody. my only problem is that i cannot see the screen at all!!
    i've tired turning my phone off, taking out sim and memory cards, putting different sims in and charging it.
    nothing works!!
    is there anything i can do?
    can anybody help me with this?
    or is my phone just past its 'use by' date?
    please, please help me!
    thanks

  • Start-up problem with hp pavilion dv6t-7000‏: "Boot Device Not Found. Hard Disk (3F0)" error

    I started getting start-up problems with my hp pavilion dv6t-7000‏.  It happens intermittently. 
    The boot error is:
       Boot Device Not Found
       Please install an operating system on your hard disk.
       Hard Disk (3F0)
       F2 System Diagnostics
       For more information, please visit: www.hp.com/go/techcenter/startup
    Could a faulty BIOS update cause this problem?
    Anyone else who may have experienced a similar problem?
    I'd appreciate any help about this problem.  Thanks.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolve Boot Device not Found Error Message
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • Start up problems, including from installation disc.

    Hello everyone in the Apple ether, I need your help!
    I have a powerpc based iMac G5 at home that I set up for my mum to use once I bought my macbook. I finally managed to win her over with talks of how much easier it would be for her to manage her photos in iPhoto, and everything was going really well. I recently came home after my final year at uni and some travelling to find that the computer is taking a long time to start up. This can be in both the grey apple loading screen but also once it logs in it can take a long time to display anything over than the desktop background, and even once it displays other items any attempt to open anything just results in a spinning wheel icon. At the worst case it has taken about 20 minutes to get going.
    Once it has fully booted, the machine doesn't appear to be working any slower than normal. I tried using disk utility in mac OSX and verifying permissions etc and that didn't do anything. I then tried googling the problem and came across this article on the apple web site. http://support.apple.com/kb/TS1417
    Starting in Safe Mode did not resolve the issue so after backing everything up I tried starting from the installation disc. This is not something I have ever done before and as someone that never really delves beneath the surface of her machines I was a bit scared of doing it. But I put the disc in and restarted and held down C just after I heard the chime, and shortly after it all went wrong. The screen went grey and all I could see was the image you get when it crashes (you know, the power sign with text over it saying you need to restart) with lines of code all down the left of the screen. I took a photo of the screen on my camera so can give details of the code if you need them. The last line said
    Kernel version:
    Darwin Kernel Version 8.8.3: Wed Oct 18 22:00:38 PDT 2006; root:xnu-792.15.4.obj-4/RELEASE_PPC
    panic: We are hanging here...
    After a few minutes on this screen the fan started working overtime and after about 5 minutes of that I just turned it off using the power button on the back. The machine has since started up normally (ie slowly) but is working fine.
    So I was wondering if anyone had any ideas how to fix the slow start up problem without booting from my install disc, or indeed if anyone could suggest why I can't boot from my install disc? Thanks very much for your time and help.

    It appears you experienced a kernel panic which is hardware related. A few suggestions for you to try:
    Except for the keyboard & mouse, disconnect all devices from the computer & try the suggestions mentioned in the following:
    http://docs.info.apple.com/article.html?artnum=106805 Mac OS X: "Broken folder" icon, prohibitory sign, or *kernel panic* when computer starts
    User Tips: Kernel Panics
    ==============
    Boot up from your Tiger or Leopard Install DVD while holding down the "c" key.
    Select the language you wish to use, and then choose *"Disk Utility"* from the menu bar.
    Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the *"repair disk"* button in the right hand section of the window.
    Once this process has been completed restart your computer and run *repair permissions* from Disk Utility.
    * If Disk Utility (from the install DVD or HD)is unable to complete the repair, you will need to use a stronger 3rd party utility like DiskWarrior, Techtool PRO (not Deluxe) or Drive Genius.
    =============
    How much HD space is left on the iMac?
    How much RAM is installed?
    ==============
    Which "model" & "generation" G5 iMac does your mother have?
    Need this info so that the knowledgeable users can provide you with the proper troubleshooting solution(s).
    http://docs.info.apple.com/article.html?artnum=301724-en How to identify your iMac
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh355.html Getting information about your computer
    You can have this info displayed on the bottom of every post by going to 'My Settings' which is located in the column on the right under your name, and filling in the information asked for.
    Thank you

  • When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

    When I close my iPhone and I want to open it to use it again, the opening process takes more than an hour, I regretted to buy the iPhone because of this problem that you do not suffer at all with Nokia,how I can solve this problem?

    mostafa182 wrote:
    ... how I can solve this problem?
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of yo

    I had an iphone 4 and when I downloaded the IOS7 started having problems. Gone the phone keypad, could not type more names of my contacts in the phone search. I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write

    dedegodoy wrote:
    I decided to buy the iphone 5S and since downloaded the IOS7.1.2 the search of your phone contacts it takes to open or write
    What does that mean? What is your technical support question?

  • Photo Gallery start up problem

    I have a glitch and it's probably me … but here's what
    I know.
    About Don Booth's Photo Gallery:
    It's great. Everything is good - integrated with my CSS -
    looks nice.
    When the page loads all is well except the first image in the
    Gallery does not display in <div id="mainImageOutline"... (and
    the first thumbnail is not highlighted). While I'm building and
    testing this is OK. Just click a thumbnail and everything works
    well.
    In the demo, the Gallery is operational by default and starts
    up with the first thumbnail and Spry:detail produces the
    corresponding image (automatically). That's what I want.
    About my code:
    Except for a couple of "page layout" divs that I have,
    consistent with my own site-wide style sheet conventions, such as
    <div id="wrapper"> and <div id="maincontent"> I have:
    1. Copied Don Booth's xhtml code directly from the
    Spry_1_1_022408 download sample.
    2. Copied Don Booth's css code directly from the same
    download sample.
    3. Copied Don Booth's gallery.js directly (without change as
    far as I know).
    The only significant change (apart from CSS and xhtml
    structure) in my work is - I added an additional Spry:detail div to
    present additional datapoints from xml. This is not relevant to my
    question because the issue that concerns me is consistent if I
    remove this second detail div. The start-up problem remains.
    The URL for the gallery page in question is:
    http://www.yhqg.org/Celebration/quiltshow2008/galleryix/gallery.htm
    I imagine the problem is in gallery.js. You should know that
    javascript is a bit like dungeons and dragons to me.
    I have an error report:
    Error: dsPhotos is not defined
    Source File:
    http://www.yhqg.org/Celebration/quiltshow2008/galleryix/includes/gallery.js
    Line: 55
    So, when I see:
    var gAutoStartSlideShow;
    if (gAutoStartSlideShow == undefined)
    gAutoStartSlideShow = true;
    I imagine I'm looking at something useful but I don't know
    what to do with it, or if it is the right code to focus on. I
    respect the relationship with level 4 support engineers, but after
    trying to solve my own issue for a few weeks I decided it was time
    to submit my question. How do I get Photo Gallery to start up like
    the demo?
    Additional information:
    There is also a series of error reports that show when the
    Gallery is playing (for example):
    Warning: Expected end of value for property but found
    '-0.0775'. Error in parsing value for property 'opacity'.
    Declaration dropped.
    Source File:
    http://www.yhqg.org/Celebration/quiltshow2008/galleryix/gallery.htm
    Line: 0
    I don't think it is related, but that's what I know.
    I tried to copy my xhtml (below) but it caused this message
    to exceed allowed size. But I don't see that xhtml is the problem.
    You can see the source at the URL (above).

    Hi Latauro,
    Sounds like you need to turn your Slideshow into a Track, and then set the Track to display as 16:9 Letterbox; but first, you'll also need to encode your slides as wide Mpeg 2 clips (encode set to 16:9), too; to whatever duration you have them set in the Slideshow, currently (if they're not already wide encoded clips).
    It would be good to stick some same duration audible or silent same format and bit rate audio underneath each of the new movie slides, to present players a nicely packed VOB.
    Take care,
    Trai Forrester
    TFDVD Research Labs
    http://www.DVDVerification.com
    PS. If this helps you, would you please remember to declare the thread as "Solved". Although probably hopeless, someone should make a run to try and catch up with good Drew!! (see what happens Hal, when you take some time off?!

  • Start-up problem keys won't work

    Hello out there,
    I have another start-up problem with a G5 2.0 GHz (7.2).
    I can't use any start-up keys (such as holding c oder s).
    I can't reset PRAM. Starting from CD works only when I unplug the hard drive. The keyboard works fine than.
    Any suggestions?
    Thanx
    Thorsten
    all from G3 to G5   Mac OS X (10.4.9)  

    I found an answer by myself.
    Holding the power button after switching on brings you to the open firmware.
    Now you can type:
    reset-nvram [enter]
    reset-all [enter]
    After that the startup keys worked again.
    Sometimes it's useful to refine your search

  • Start-up problem with the Z10

    Can you assist us in a Start-up problem with the Z10's.
    I have read a lot of complains with the Z10 starting-up and then got stuck at 98% completion. No further response after that!
    For any further information please check the "BlackBerry Support Forum" on this same site.
    Please respond or tel me who i can contact in this regard?
    Thank you
    Kobus69
    Subject Title and beginning of post edited to reflect new topic.

    Hi
    Please find the link given below might help you to fix your issue.
    Resolve Boot Device not Found Error Message
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • PowerBook G4 Start-up problem

    Start-up problem ---
    1. When I recently ran OnyX, I was told to run the Apple’s Disk Utility from the Start-up Disk.
    2. However, before doing this, I ran the Disk Utility from the hard drive, but the program would not complete the “Repair” function. It just got “stuck” and I had to stop the repair.
    3. While running the Disk Utility from the Start-up disk, I got the following message: “Disk Utility has lost its connection with the Disk Management Tool and cannot continue. Please quit and re-launch Disk Utility.”
    4. I did quit and re-launch Disk Utility but received the same error message.
    5. Took PowerBook to Apple store and technicians ran diagnostics (for several days), couldn’t identify problem even though computer wouldn’t start after they ran full set of diagnostics.
    6. I reinstalled the OS 10.5 from scratch, reformatting my hard drive. Then, I re-installed all programs and documents, etc. Seemed to work OK.
    7. Tried to run OnyX, but the computer froze. Ran Disk Utility from the start-up driver and it repair hundreds of permissions as well as “repair disk” function (hundreds of items).
    8. While the PowerBook is running OK right now, am concerned about possible hardware failure.
    Any thoughts/ideas?
    Thanks.

    Download Smart Utility from http://www.volitans-software.com/smart_utility.php . It will enable you to see the values of the SMART sensors, and can give you insight into the health of the drive.
    When you ran repair disk from the OS X DVD, did it complete normally? No 'failure on exit' message?

  • I got my iPhone 5 s almost a month ago and updated its iOS but from there on I started having problems, the ph sometimes doesn't respond at all to the touch or apps start to open on their own very rapidly and this continues till it can go no further!

    I got my iPhone 5 almost a month ago and updated its iOS but from there on I started having problems, the ph sometimes doesn't respond at all to the touch or apps start to open on their own very rapidly and this continues till it can go no further!

    First steps in troubleshooting:
    Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
    Then reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss)

  • Shut down // start up problems

    i am having power related problems on the intel mini and i want to know how widespread this is before i confront apple support. btw i love the mini--this is my 2nd mini. i have had a power on problem with a mini even on the day of purchase and it was exchanged graciously at the apple store in white plains this past july.<this was a power button failure issue>
    here's whats happenning....1>it misbehaves on shut down or restart by software. there gets to a point where the screen is black but the white light on the box stays on and the vents in the back are still warm. my workaround is to manually shut down about a minute after the software shut down by holding down the power button on the back of the mini.
    ......2> start up problem. the mini wont always start when i push the power button. my workaround has been to turn off my surge protector for about 10 seconds then turn it back on and VIOLA the power button can start the mini. i guess it needs to be cold to work.
    i have been reticent to go to the store because i rely on this machine too much and i am not the only user here.
    can some reader disclose if such a hardware failure is known?
    thanks in advance.

    thanks. i hadn't thought about the surge protector.
    keyboard and mouse are bluetooth.monitor is digital 24". i have an external powered usb hub which runs my time machine external drive. i keep everything else unplugged from the usb hub during startup and shutdown because my ipod shuffle caused startup problems in the past.
    i had similar troubles with my first mini when it was plugged directly into a wall socket. the surge protector seems to help--at least i can cold start the mini without unplugging it.
    i have a genius bar apptmt this evening and i will see what gives. i am glad i made apple put in their own overpriced ram so i never voided the warranty. maybe i will buy a care plan to cover myself when i am there. but i so want to raise this mini from 2 to 4 gig now that mem is so cheap. if i can get this problem stabilized...
    my very first mini was powerpc and the ipod shuffle, according to genius bar, caused its demise due to usb 1.1 and usb2.0 handshaking problems. i still have it somewhere and plan to install a harddrive to get it going.
    thanks again guys.
    and i'd like to ask others again if this problem is more common.

Maybe you are looking for