Nokia2630 screen darkens after 15 seconds,is it no...

Dear All,
The screen of my newly purchased Nokia 2630 darkens after about 15 seconds, I can see that the cahracters are still there but they are difficult to read.
This makes it e.g. difficult to read a phone number or some other info. If I want the screen to become bright again I have to push any button which has for result that I come onto another screen or the action associated to that button is done. I tought that I could keep the screen lighting on by setting the sleepmode OFf and the energy saving stand OFF but this doesn't help. there seems to be no menu item available where this screen darkening time can be made longer.
My questions :
1)is it normal that the screen goes dark after a short period ?
2)If yes Can I lengthen the period before the screen goes dark. Setting screensaver time out longer doesn't help.
3)What's the use of havin a screensaver on e.g. the analog clock if you can't hardly see it because thescreen darkens after 15 seconds.
Many thanks for helping in advance,
Rgds
Solved!
Go to Solution.

I asked the same question to Nokia Care and this is the answer I received-
Thank you for contacting Nokia Care.
With regard to your issue, I recommend that you reboot your Nokia 2630 by switching it off before removing the back cover and battery. After 10 minutes, replace the battery and back cover, then switch the phone on. This acts as a temporary measure to reset the software of the phone and refresh the device's memory. Check and see if you still have the same issue.
If the issue persists, I suggest that you take your phone together with your proof of purchase to your nearest Nokia Care Point. This is because we are unable to physically assess the phone to determine its issue. The technicians will assess if a repair is required and take the necessary measures to rectify the issue.

Similar Messages

  • My screen darkens after 1 minute and turns off after 3.  All of a sudden, now, after the screen shuts down, it comes right back on????

    My screen darkens after 1 minute and then turn off after 3 minutes (energy saver).  Now, all of a sudden, after it shuts down it comes right on???

    thank you so much sir... i am very thank ful to u... it was an breath taking moment ... i was almost dead as it didnt work

  • Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear

    Sorry for my bad english. My ipod have a white screen and after few secondes somes lines appear.

    - Try a reet:
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Next connect to computer and if it shows in iTunes restore the iPod.
    - If the screen is still white, let the battery fully drain and charge for an hour.
    - If still white screen it is time for an appointment at the Genius Bar of an Apple store.
    - If not, the try the reset and connect to iTunes and restore.  Also try placing the iPod in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • Upper part screen darkens after EFI 1.1 update

    After the EFI 1.1 update I am experiencing some problems with the screen of my iMac core duo 20". In OSX, after my mac turns back on from sleep-mode, after a few seconds the upper part of my screen darkens. It looks like the backlite panel dims slightly on the upper part.
    The strange thing is it doesn't happen when I boot in Windows XP with bootcamp. I thought I was experiencing hardware problems. But this can't be the case because it works fine in XP... Anyone

    Nope, didn't work.
    Strange thing is: I've worked on my machine the whole day without any problem. But... when my iMac goes to sleep and wakes up, the problem appears in a few seconds. The whole screen darkens a few tints, and the upper part of the screen darkens a bit more.
    If anyone knows a way to undo the 1.1 update. I can't find the 1.0 version anywhere on the apple site...

  • Screen darkens after booting in Windows mode

    I have an intel mac pro that runs windows xp (sp3) on boot camp.
    Every time i boot up in windows mode, once I reach the desktop, the screen darkens. Windows xp, to my knowlege, does not have the capacity to adjust screen brightness, as that is normally done manually with the monitor. When I boot back up in mac mode, the screen is unusually dark, so I go to the display window in the control panel, and find that it has been set to minimum brightness.
    This does not happen unless I boot up in windows mode.
    I think this is a new phenomenon. Since it's relatively subtle, it may have been going on for a while.
    I just installed SP3 a few days ago, after installing the bootcamp 2.1 update.
    and before you ask, yes, i have installed the mac drivers in windows.

    hmmmm. Interesting. Does seem that the monitor is common. Your description just says macPro. If the 8800 is the OEM card, then yours is a quad 3.0, or current gen 8 core?
    Do you also have the external controls on the monitor disabled via the X control panel? Although the old 23 does have both brightness and power controls on the front bezel, I have disabled them in the X control panel. I wonder if re-enabling them and using it for brightness control instead would make a difference on the windows side?
    ===
    On replacing the monitor....
    Is the 8800 GT HDCP compliant?
    I don't think Apples new FP displays are. I say that b/c if if you do replace the monitor, it may be worth considering a small HD TV, many of which are HDCP compliant, and less expensive than the Apple screen.
    That would set you up for an internal blueray player
    I've seen a Sony on sale for about 150.
    I have an off brand...Insignia, I think, 19" HDTV as the monitor on my Windows box. Surprisingly nice screen, and has an ATSC tuner, too. Think retail on it like 300$ at BBuy (I got it as a giveaway at a local car dealer).
    HDMI, composite, and VGA inputs. composite and minijack for audio.

  • HP2338H MONITOR TURNSON THEN THE SCREEN BLACKSOUT AFTER 5 SECONDS

    HP2338H MONITOR TURNSON THEN THE SCREEN BLACKSOUT AFTER 5 SECONDS

    Hi OLYADKRAM:
    Thank you for you inquiry.  I understand that your monitor goes black or blank, I am sending you a  link to a document on "Monitor is Blank"  click here.
    I hope this helps. Please let me know how it went.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Screen dimming after 20 seconds - not coming back to life

    This morning, when I started my laptop, it was working fine. THen after about 20 seconds the screen went really dim - dimmer than you can make it go normally, and too dim to use, but you can still see somethign.
    I put it too sleep, then brought it back again, and it came to life - but then did the same thing.
    Can anybody tell me what is wrong?
    Thanks

    You also may want to check TVT Power Manager; there are a few options in there that dim the display, some of which really dim the display quite a bit.
    Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve a problem you encountered? Mark it as "solution provided" to help others with the same problem.

  • Macbook air 11.6' (late 2010 model) screen dims after few seconds and does not recover.

    Hi,
    I am running win7 under bootcamp on a macbook air 11.6'' late 2010 model (1.4 dual core, 4Gb memory, 64Gb ssd). A few days ago the screen started to dim a few seconds after bootup. Even if I pres any of the keys it does not light up again. However, if I connect to an external display it works fine. I use it for work and often I am mobile so I really need the display to work. Any suggestions?
    Thanks in advance!
    sidirops

    Found another forum with the same problem: http://forums.macrumors.com/showthread.php?t=1560774, including another youtube video: http://www.youtube.com/watch?v=vaGOKuwqsaw. The severity of the problem in this link looks worse than my problem. Mine is less severe than what's in this video, but more severe that what's in the first youtube link I provided.
    The posts in that forum claim: 1) the problem began after upgrading to a newer OS, 2) it occurs after waking from sleep, and 3) that closing the lid for 10 seconds is a work-around fix.
    Would be great if Apple fixes this. I won't buy another Mac, desktop or laptop, if they don't. Macs are too expensive to only get 2 years from, and in my opinion thay are not that much better than other options. I'm going to post a bug report on Apple's web site.

  • [SOLVED] GNOME login screen freezes after 3 seconds

    Hello,
    today I installed Arch-Linux the first time. I had some issues during the installation (following https://wiki.archlinux.de/title/Anleitu … Einsteiger (its the german version, seems to differ a little from the english version)), but everything went good until I installed GNOME. Now the login screen freezes everytime after quite exactly 3 seconds, unless I press [strg]+[alt]+[f2] fast enough to switch in tty2. Then the screen will only freeze when I switch back to tty1. Once the screen is frozen, I can't switch to tty2 anymore.
    I think the problem has something to do with my nvidia hybrid graphic system. During the installation I installed the packages bumblebee, bbswitch and primus, but uninstalled them because I thought they could be the problem. But although I uninstalled the packages, the "Stamina-Mode" status led is turned on after the system has started and the "Speed-Mode" status led not. I think that's a little bit strange, because I can't imagine which process is controlling these leds.
    So I ran just
    pacman -S xorg-drivers
    and I had to create the xinitrc-file (because I could not find this file in /etc/skel). Now the default GUI appeared after I ran
    startx
    (I saw some windows and a clock). After that I installed gnome, changed the xinitrc-file in my userhome and got the freeze after a reboot.
    I don't know if it has anything to do with my problem, but I get the following error-messages everytime I boot:
    [drm:ibx_irq_handler] *ERROR* PCH transcoder A FIFO underrun
    [drm:intel_dp_start_link_train] *ERROR* too many full retries, give up
    [drm:ilk_display_irq_handler] *ERROR* Pipe A FIFO underrun
    interl ips 0000:00:1f.6: thermal reporting for required devices not enabled, aborting
    Hoeman
    P.S.: Because I'm a total beginner at linux I probably missed the most important informations, but I can give you more if you tell me how
    Last edited by Homan42 (2014-10-18 19:43:17)

    Ok, I could solve the problem myself by installing the latest nvidia driver. Now I guess the intel grahic card is not used anymore, but I don't really know...

  • IPhone 6 Camera from lock screen, closes after 1 second...

    When I access the camera from the lock screen, it opens for about one second then just blacks out to a screen off mode. I can still get to camera the long way by unlocking screen and clicking on icon, but want to know why the shortcut from lock screen is buggy. Please advise.

    I'm not sure what you meant with the first part of your reply. However, the reset seems to returned behaviors to normal... so thanks for that.
    Not that it matters much now, but again, the issue was that I wasn't able to go directly into camera mode from Lock Screen... the camera app would appear for one second, then the screen would just go into sleep mode. Unlocking screen with passcode or Touch ID worked fine then opening apps from there all worked fine. Just the camera shortcut from Lock Screen as the issue, but now it is resolved.

  • Program crashes after 10 seconds

    Hi when i start final cut pro X i can see all the normal screens, but after +- 10 seconds, the program crashes.
    It is the trial version, ans i have already reinstall my OSX mountain lion 10.8.4
    It doesn't help
    liefst in het nederlands aub, en anders ga ik mijn beste engels moeten boven halen
    greets mario

    You need to give detailed information about your computer. You can also try the usual delete preferences http://www.digitalrebellion.com/prefman/

  • Pavilion 23 bw shuts down after few second after my pc booting.

    So I just bought two Pavillion 23 bw to dual screen. When I try to boot up my pc with only one connected the screen shows a sign of life by showing me the windows loading screen but after few seconds, fall into sleep mode and dont want to recognize the pc anymore. I tryed multiple times, no succes. The drivers have been installed and the DVI cable and port is the same I used for my previous screen. The port in question is from my graphic card which is a Radeon 280x.
    Can you help me please!

    Only one of them is doing this

  • Email not opening This is a sudden thing, Email had been working fine for two months then today would not stay open now it will not open at all. after trying to open mail I receive a white screen for a nano second and the app closes

    Email not opening on my iPad2 This is a sudden thing, email had been working fine since purchasing the device then today would not stay open,  now it will not open at all. After trying to open mail I receive a white screen for a nano second and the app closes.

    Have you tried closing the Mail app completely ? From the home screen (i.e. not with Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Remote desktop connects, black screen, disconnects after a few seconds

    I have several servers running Windows Server 2012 R2. These servers are used for testing, and are members of a domain which has two DCs, each of which are running DNS Server.
    Yesterday I noticed one of the servers was having an issue with its remote desktop connection. If I try remoting into this machine, it connects to a black screen, sits there for 2-3 seconds and then promptly disconnects. No error message is given. I tried
    this from a couple different Windows 7 machines, and got the same result. I tried from my wife's iMac, which runs Jump Desktop, and too was met with the same result.
    I can, however, remote into this machine via RDP from my work-issued laptop, which is running Windows 8. However, I cannot remote into the problem machine via Remote Desktop Connection from one of the 2012 R2 servers--I am met with the same result as the
    other machines: connect, black screen for 2-3 seconds, disconnect without error.
    I can remote into all of the other 2012 R2 servers without issue from any machine, including the iMac. I am experiencing this problem on one server only.
    Since it is a test server, I reinstalled Windows from scratch this morning. This meant formatting the SSD and wiping everything out. I reinstalled the drivers, joined the server back to the domain and installed all of the updates available from Windows Update.
    And rebooted. And yet, the problem persists!
    I tried troubleshooting the "usual suspects," like turning off Windows Firewall, disabling antivirus software (currently none installed), disabling IPv6, setting a static IP instead of using DHCP, etc. I did notice the network adapter said it was
    on a Network, not a Domain Network. I corrected DNS settings, and the network reidentified itself as being on the ParietalBone.net network. And yet, the problem persists. Remote Desktop to this server still yields a black screen for 2-3 seconds, followed by
    a disconnect--EXCEPT from the aforementioned Windows 8 machine.
    I looked in the TerminalServices-LocalSessionManager log on the offending server, and there are no errors. I only see repeated entries that say "Session X has been disconnected, reason code 12," where X is 1 or 2. On a couple occasions, the reason
    code is 11. But I don't see any errors indicating a breakdown in security negotiation.
    Without any robust logs or debug details, I'm at a loss of where to look for a solution.

    I am cautiously optimistic that this may have been resolved.
    The network card in the computer was only a 10/100 built-in card, so I replaced it with a 1Gbps card. Interestingly, this did NOT resolve the issue. I ran netsh to check on the state of the chimney offload, but it was already disabled.
    In the network card properties, I changed the link speed and duplex from automatic to 1Gbps full, re-ran "netsh int tcp set global chimney=disabled" and rebooted. The problem persisted.
    And so I went to the network card properties and set IPv4 Checksum Offload, Large Send Offload (three of these -- IPv4, v2 IPv4 and v2IPv6) and TCP Checksum Offload (IPv4 and IPv6) to Disabled. Jumbo Frames were also disabled. I rebooted again.
    After the subsequent reboot, I was able to connect to this Server from machines that previously gave me difficulty. The only machine I haven't been able to test today (I'm in the office) is my wife's iMac, which is at home. However, I was able to bring this
    server up via Jump Desktop on my iPad, so I'm suspecting that perhaps one of the offload options was to blame. I'm not sure why this would allow me to connect from some machines but not others. And as noted above, I have many other machines running Server
    2012 R2 and they are NOT experiencing this problem. And I've not done any tinkering with network settings on any of them, so their chimney and offload settings are all in the default configuration.
    Regarding the other items -- NIC team, virtual machine, etc. -- there was no NIC team, no SRIOV and no RDMA involved.
    I had to turn IPv6 off on this machine, and only on this machine, because having it enabled was causing a lot more problems. DNS registration would keep failing, it couldn't pull Group Policy, it couldn't get time sync with the DC, etc. The servers are all
    set up with static IPv4 addresses. The router supports IPv6 but I'm not actually using it, so disabling IPv6 wasn't a concern to me.

  • When i open the itunes store, the screen goes blank after 2 seconds so I cant order music

    When I open the itunes store, the screen goes blank after 2 seconds, so I cant order any music?

    same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

Maybe you are looking for

  • Itunes not recognising ipod classic

    Hi all, if your using a Black iPod classic 160GB with wheel on the front when using and connecting to iTunes, if iTunes does not recognise your iPod you will need to  reload iTunes from Apple site, don't let any one tell you it is possible to uninsta

  • Bug or feature: TableView sorts the underlying list?

    that's at least highly unexpected - all variants of table sorting I know, support some kind of sortedView on top of the user model (either by a framework outside of the table, as GlazedList, or internal as core swing). Is it a not-yet-done feature or

  • Losing my mind

    OK gang... I know I need to replace my WDC WD2500JS-40MVB1, which is failing. Is this a 2.5" SATA drive ? What specs do I need to ensure are on the replacement drive so that it will function in my computer ? 2.1 GHz PowerPC G5 Thanks Frank

  • Error in executing Flight Demo

    Hi all I am getting an error while trying to execute the Flight demo.the error is as follows:- The following error text was processed in the system IXI : An exception that could not be caught occurred. The error occurred on the application server SAP

  • Items in Print Queue disappear (HP LaserJet 1200)

    &It happens quite regularly that when I send several documents to my HP LaserJet 1200, some of them disappear from the queue even before the data can be sent to the printer. An example of what happened only minutes ago: I sent 4 documents to the prin