NOKIA6210 NAVIGATOR:HOW MANY TIMES HAS BEEN RECEIV...

Hello
Is urgent, please.
In other nokia models I could see - at received calls- how many times a single number( the same number) has called. for example:le´ts suppose the number 123( a friend of you) called you 3 times yesterday. How could you see these 3 calls with their respective hours with the 6210 navigator?
Thank you very much for your help.

You can see that in the log application.
Not the call log that you get by pressing the green key but the full log accessible through the phone's menus.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Similar Messages

HT201342 Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Is there any way to find a log of the send e-mail from ICloud.. to analyse how many email has been send and deleted within a day from send items

Thx Winston,
I can count the send item. But let me try to explain why did I ask this question.
I had a trouble in sending e-mails from icloud on 22/2 and when I saw in my send item there were no emails.
But the mesgs to whom I emailed received and out of which only few of them didn't got the email. So I wanted to know the log abt the outflow of the mesg with subject and the receipants email id and the list with attachment or not.
How and where will I get the information apart from send item and draft mesg and the outflow undelivered?
Regards
Sarfaraz

How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR

Hi,
How to get Reports for specific User that how many password has been reset using FIM SSPR in FIM 2010 R2 SSPR
Regards
Anil Kumar

Hello there Anil,
A simple way to quickly get a overview is to look at the request history within the portal environment (note that this will expire in a few day based on your environment, after that you would need to FIM Reporting Module - but you could increase this to
maybe 60 days to so, watch the DB size).
To do this you could create some custom search scopes of do some custom queries. The creator of the SSPR activities always has the same GUID so you can use that so search.
In your search scope you can use the following XPath to play with.
- All Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and Operation='Put']
- All Completed Password Reset Requests - /Request[Creator='b0b36673-d43b-4cfa-a7a2-aff14fd90522' and RequestStatus=‘Completed']
You can play with the "RequestStatus".
Hope this helps.
Almero Steyn (http://www.puttyq.com) [If a post helps to resolve your issue, please click the "Mark as Answer" of that post or "Helpful" button of that post. By marking a post as Answered or Helpful, you help others find the answer
faster.]

How many times has iTunes been downloaded

I thought this would be easy to find via Google, but I can't.
What is the official word on how many copies of iTunes have been downloaded or pre-loaded on machines? Anyone know?
Bryan

150? sounds really huge:)
http://www.sccs.swarthmore.edu/xmlrpc/15/map.html
http://www.sccs.swarthmore.edu/xmlrpc/16/map.html
http://www.iutoic-dhaka.edu/newsevents/inbox/3/map.html
http://www.iutoic-dhaka.edu/newsevents/inbox/4/map.html
http://www.sc4.edu/surveys/data/xml/11/map.html
http://www.sc4.edu/surveys/data/xml/12/map.html
http://www.sccs.swarthmore.edu/xmlrpc/15/index.html
http://www.sccs.swarthmore.edu/xmlrpc/16/index.html
http://www.iutoic-dhaka.edu/newsevents/inbox/3/index.html
http://www.iutoic-dhaka.edu/newsevents/inbox/4/index.html
http://www.sc4.edu/surveys/data/xml/11/index.html
http://www.sc4.edu/surveys/data/xml/12/index.html

Know how many JPanel has been selected

Hi, i had somethings to do, and i really dont figure how to do it, i have an applet that is a kind of paint, and each draw is done on a new JPanel so is there a way to know which JPanel the user has select if i want to be able to select more than one JPanel. Dont know if you understand, my english isnt so good... Could be like a selection tool but i want to know which JPanel has been selected between x,y and width,height of a rectangle made with the mouse....
thx for the help

i could go with a getComponentAt to know which one has been under the selected rectangle, but dont know how can i move it all after i know which one has been selected with the mouse

Is there a way of checking how much time has been spent on an Adobe document?

I would like to know how much time is spent preparing or completing Adobe forms for time keeping purposes. Is there any record of this in the individual document metadata, or anywhere?

Hi mikeq,
I don't believe that's something that gets tracked in your Acrobat.com online account. There are free time-tracking utilities, though. I did a quick Google search and found a number of them.
Best,
Sara

How many times can you forward an e-mail which has been forwarded to you?

Many times, I receive an e-mail forwarded by a friend whose other friend forwarded him the same e-mail. Soon, the forwarded e-mail is very long since it has been forwarded so many times. Is there a limit to how many times an e-mail can be forwarded? Also,what can I do so that the only address I see is that of my friend instead of the address of anyone and everyone who either received or forwarded the original message? Thank you.

First, there is no limit. Second, avoid the problem by having everyone you know remove your name from their lists. Third, direct all such forwarded mail into the trash directly by creating a Mail rule. Ask all your "friends" to configure their email program to not include the text of the forwarded email in the body of the forwarded message (and if they send all this stuff to you from an email list, are you really their friend?)
If you cannot resist, then simply remove all the repetitive included forwards from the message before you send it to some other poor soul.

Can I see how many times a shared album has been viewed?

I primarily use Revel to share photos of events since the files get too big to email more than 2 at a time. Usually, there is a very limited group of people that would be interested but the link to one album was shared on Facebook and I'm curious to see if many people viewed that album. Is there a way to see how many times the album has been viewed?

Use your account credentials to log on to iTunes Connect. Or use those same credentials with one of the 3rd party app reports management tools such as AppViz, AppAnnie, etc.
iTunes Connect
https://itunesconnect.apple.com/

How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it?

How many times can I attempt the passcode before I can't enter it any longer...it has been over 3 hours and it will not let me re-enter it? My daughter forgot the new code she put in....

What dowes the screen say? If it just say disable and gives not time to retry then you have to restore the iPod
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Counting how many times my app has been opened

I want to be able to count how many times a user has opened my application, and so every time the application launches, this number is added by one.
Does anyone know how I store a long-time variable like this that will still need to be available across different runs of the application? I imagine this value would be stored in the application's preference file in Library, but I don't know how to do this.
Can any of you please lend me some advice/code to achieve this (I am using Objective-C)?
Thanks in advance,
Ricky.

Hi.
It has been a while - but I finally got around to slapping some code together. I have successfully created and retrieved the value from the preference file, but for some reason, adding 1 to my value each run is not working. It only adds by one after each BUILD. So I have to rebuild it every time I want it to increment. See my code below;
[NSUserDefaults init];
int numberOfTimes;
numberOfTimes = [[NSUserDefaults standardUserDefaults] integerForKey:@"used"];
numberOfTimes = numberOfTimes++; //It is that that is not working.
[[NSUserDefaults standardUserDefaults] setInteger:numberOfTimes forKey:@"used"];
NSLog (@"%d", [[NSUserDefaults standardUserDefaults] integerForKey:@"used"]);
I can't seem to stop anything wrong, but then again it is late.
Do any of you see any errors here?
Thanks,
Ricky.

HT4059 Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? Mr Ignorant

Being new to iBook publishing I need to know if stats are available to determine how many times my iBook has been downloaded. Can anyone help please? I need to persuade someone that this really is worthwhile. Mr Ignorant.

The only people who can possibly assist you with this is Apple Customer Relations, call your local Apple contact number and ask for Customer Relations then explain your situation clearly and politely (be firm but don't rant).
You might want to investiage what the local laws are regarding defective goods and 'fit for use' definitions on warranties etc. Consumer Protection can be a useful tool to use or bargain with if needed ...

Am I able to find out how many times my ICloud account has been accessed?

Am I able to find out how many times my ICloud account has been accessed?

I'm afraid iCloud doesn't provide access logs.

Finding query access frequency or how many times a query has been executed?

Dear Experts
I need to find the total number of access frequency of individual queries that are requested by the users say at a particular time.
Say there are 20 distinct queries requested in the time difference of 3 hours. All of the 20 queries or some of the queries may be requested for more than 2/3 times at that time by other users. By the way say query Q1 is requested 5 times at that so its query access frequency or how many times this query is executed is 5.
From where and how can I can find this counting of query access frequency or how many times a query has been executed at particular time or a session?
Normally we know the there SQL history dynamic performance views or if it can be possible to query the Shared pool library cache for SQL area it may be possible to find the total number of execution time for a query. But how to find that if anyone knows, please help me about this.
Regards-
Engr. A.N.M. Bazlur Rashid
OCP DBA

That's one of the stats reported by statspack - assuming that your query does sufficient work to meet the thresholds for the standard report. Executions is of course one of the columns of v$sql so you might just wish to sample that yourself. Finally if you are on 11g and the sql you are interested is relatively low resource intensive and you are licensed for AWR then you can use the slightly madly named "colored sql" feature that ensures that a specific statement will always be sampled for AWR.
Niall Litchfield
http://www.orawin.info/

How to keep track of how many times a link has been clicked?

How to keep track of how many times a link has been clicked or accessed? Do I need to use database for this?

Hi
Proably something like this can work,
1> Have a servlet/bean invoked when the link is linked
2> have a static variable in that servlet/bean wich gets incremented before the control is passed to another desired page..
The problem with this approach is that care has to be taken that the servlet/bean is not re-instalised, in case of which the static variable will also be instalised and the data would be lost.
The best thing is to store the count in the database.
Regards
Arathi.

How to find how many times a program has been executed & by whom

Can any one help me to find log of program : Details like how many times the program(T-Code) has been executed and by whom(User ID) and when

Hi,
sy-uname will give u the name of the person.
sy-uzeit will give u the time of exection.
Not sure about number of times of execution.
<REMOVED BY MODERATOR>
regards,
Ramya
Edited by: Alvaro Tejada Galindo on Mar 19, 2008 4:15 PM

NOKIA6210 NAVIGATOR:HOW MANY TIMES HAS BEEN RECEIV...

Similar Messages

Maybe you are looking for