Nokia701 unable to connect to a WPA2 connection

Hello , my nokia 701 is unable to connect to a WPA2 network. It shows the error "feature not supported". What to do???

refering us to the specs of the phone is not a solution or an answer. I have wpa2 in my company which requires me to enter username and password
my computer and ipad 2 connects smoothly with no hassale. by the way in my computer i stopped certificate authentaction for connection upon the advise of network admins they told me i only need a valid user name and password.
now show me a way to connect to a WPA2 enterprise WLAN without using or running around for a certificate which does not exist in nokia 701
IPAD2 when you connect downloads automatically what ever certificate pushed to it by the network. now why nokia phones can not behave the same way?!

Similar Messages

Unable to connect to Wi-Fi connection using WPA2 PSK authentication and encryption type TKIP

I was referred to here from this thread at the Windows Insider Program: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/unable-to-connect-to-wi-fi-connection-using-wpa2/07bae1ed-c7fb-4f85-9d26-5549cc23e57a?msgId=2eb70420-fe35-494b-a13d-dcacd4d55eb9&rtAction=1426697691002
My issue is copy/pasted below:
Original Title: TKIP selection in WiFi network settings
I have a workplace WiFi connection using WPA2 PSK authentication and encryption type TKIP.
On the machine I used to test Windows 10, I had a previous installation of Windows 7 professional which connected to my workplace WiFi using the above settings. After installing Windows 10, my workplace wifi settings were imported and worked fine.
Windows 10 had a system crash, and since I had deleted my previous windows installation, I performed a complete reinstall of Windows 7. However, when I went to install Windows 10 again, I had not taken the time to set up my workplace Wifi on Windows
7 before installing Windows 10. As a result, I had to set up my workplace wifi as a new connection in Windows 10.
When going to set up the wifi connection, the encryption type was grayed out, but appeared to default to AES. Searching the internet suggested that Windows 8.1 did not need a encryption type selected, because Windows could automatically determine
if it was TKIP or AES, hence why the option to select encryption type was grayed out. However, after completing the setup of my workplace wifi, Windows 10 could not connect to my workplace wifi. After restoring Windows 7 with a factory reset, and setting up
the workplace wifi (the encryption type selection was not grayed out and I manually selected TKIP encryption), my workplace wifi was working again.

I was referred to here from this thread at the Windows Insider Program: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_web/unable-to-connect-to-wi-fi-connection-using-wpa2/07bae1ed-c7fb-4f85-9d26-5549cc23e57a?msgId=2eb70420-fe35-494b-a13d-dcacd4d55eb9&rtAction=1426697691002
My issue is copy/pasted below:
Original Title: TKIP selection in WiFi network settings
I have a workplace WiFi connection using WPA2 PSK authentication and encryption type TKIP.
On the machine I used to test Windows 10, I had a previous installation of Windows 7 professional which connected to my workplace WiFi using the above settings. After installing Windows 10, my workplace wifi settings were imported and worked fine.
Windows 10 had a system crash, and since I had deleted my previous windows installation, I performed a complete reinstall of Windows 7. However, when I went to install Windows 10 again, I had not taken the time to set up my workplace Wifi on Windows
7 before installing Windows 10. As a result, I had to set up my workplace wifi as a new connection in Windows 10.
When going to set up the wifi connection, the encryption type was grayed out, but appeared to default to AES. Searching the internet suggested that Windows 8.1 did not need a encryption type selected, because Windows could automatically determine
if it was TKIP or AES, hence why the option to select encryption type was grayed out. However, after completing the setup of my workplace wifi, Windows 10 could not connect to my workplace wifi. After restoring Windows 7 with a factory reset, and setting up
the workplace wifi (the encryption type selection was not grayed out and I manually selected TKIP encryption), my workplace wifi was working again.

Not able to connect to wifi wpa2 networks in lenovo vibe x2

Not able to connect to wifi wpa2 networks in lenovo vibe x2. It displayed saved.but not connecting. It connects to open and WEP wifi networks. Please help

Are you trying to connect to a 2.4GHz or a 5GHz network?
What encryption is your router set to use : AES,TKIP/AES,..?
Have you tried to unplug the router from the power source for 2-3 minutes->Plug it back in-> Wait until it establishes an Internet connection-> Try to recreate the phone connection.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Unable to load the necessary SQL connectivity library

I am installing an older (non-Microsoft) program (32bit) that manages mail online and it requires an access to SQL Server to create database to complete installation. I am installing it on Windows Server 2003 standard. This program
I am installing recommends SQL Server 2000. We are now running SQL Server 2005 on a separate server. For connectivity, I installed SQL server 2005 tools (full install) on the same 2003 server as the program so that this program could manage to locate
SQL server 2005 and connect to it in order to create necessary tables and complete the installation. I already manually created the database for this program on SQL Server 2005. I created ODBC SQL Server connection string (User DSN). However, during
installation, I am getting the following error message:
ERROR: Setup is unable to load the necessary SQL connectivity library. This indicates that the proper client-side SQL utilities are not installed on your system. Setup cannot continue.
Could this error be SQL Server version specific and the program only likes SQL 2000 client tools and not 2005? Are there major differences between libraries versions? Should there be something else configured? What am I missing? Thanks in advance.

ERROR: Setup is unable to load the necessary SQL connectivity library. This indicates that the proper client-side SQL utilities are not installed on your system. Setup cannot continue.
Could this error be SQL Server version specific and the program only likes SQL 2000
client tools and not 2005?
Tools are tools, not a connectivity library and by the error message the right connectivity library is missing. Ask the software vendor which one is required or look it up on the other machine, where the application works.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Unable to retrieve tables from this connection

I have been using Dreamweaver for over 5 years. I have been
using an Access database and ASP the entire time. I am using a
Windows 2000 server for the database and web site. I have used
every verson of Dreamweaver since Ultra Dev. When I bought verson 8
and upgraded to 8.0.2, I began getting the following message when I
try to edit or create a recordset.
"Unable to retrieve tables from this connection, click on the
'Define...' button to test this connection."
I don't know what to do. Is this a widespread problem? Is it
a Windows problem? Is it a Dreamweaver problem? Is it a network
problem?
Please HELP!

Did you ever get an answer for this ?
I am having the same issue but using XP professional.

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something mis

I've had an iWeb site running for 4 months and I publish a monthly newsletter. Since August I've been unable to republish. The test connection under FTP settings works but I get an error message when I try to upload newsletter. Am I missing something?

Where are you hosting the site a what are you using to upload the site files to the server?
OT

I've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should i do???

i've lost my Iphone 4 and found it back. i am unable to restore data. if i connect to itunes its getting restarted again and again. what should I DO ??? TS KEEP ON RESTARTING ALL THE TIME

Hi there balaji007,
You may find the troubleshooting steps in the articles below helpful.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Issue not resolved
My issue is still not resolved. What do I do next?
Contact Apple Support.
-Griff W.

My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem?

My FaceTime won't connect. Every time I try to call my friend it says connecting. Then unable to connect. Or lost connection. And when I go to our FaceTime history it said "FaceTime answered on another device." What can I do to fix this problem? We always used to FaceTime. And now all of the suddenly we can't.

Apple has released a document which is reported to address the recent FaceTime issue.
http://support.apple.com/kb/TS5419

I upgraded to iOS7 without incident and has been functioning fine. However, today, I'm unable to access anything that requires connection. WiFi strong, working fine on other devices - any suggestions?

I upgraded to iOS7 without incident and all has been functioning fine. However, today I am unable to access anything that requires connection. Wifi is strong, and working fine on other devices. Any suggestions?

Hi there,
You mentioned that you have tried a few troubleshooting steps already, but you may want to take a look at the article below, specifically the section titled "If you are unable to access the Internet while connected to a Wi-Fi network"
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Hope that helps,
Griff W.

My ipad including my iphone says "unable to connect network" whenever i connect it to wifi. How could this be?

Help anyone pls!!! My ipad including my iphone says " unable to connect network" whenever i connect it to wifi. How could this be?

Try Settings > General > Reset > Reset Network Settings
Then try again.

DPS6: Unable to retrieve a backend SEARCH connection to process the search

I have installed and configured DPS 6 but I cannot get it to proxy through to our back-end Sun DS 5.2 servers. The error message I get is:
Error while reading entry [LDAP: error code 1 - Unable to retrieve a backend SEARCH connection to process the search request]As I am not familiar with the DP server I maybe making a simple mistake and would appreciate any pointers.
Background:
I have installed the DPS 6 on both a Windows 2000 SP4 server and on a Windows XP SP2 computer from the Sun Java Identity Management Suite v5 package.
I installed DS Core Server, DS EE Command-line utilities, and DPS Core Server and I selected "Configure manually after installation".
On the Win XP computer the installation path was:
              C:\Program Files\Sun\JavaES5I ran the following commands to set-up and configure the server:
     dpadm create -p 389 -P 636 C:\Program Files\Sun\JavaES5\ldap-proxy
     dpadm enable-service --type WIN_SERVICE C:\Program Files\Sun\JavaES5\ldap-proxy
     dpadm start C:\Program Files\Sun\JavaES5\ldap-proxy
     dpconf create-ldap-data-source Sun1 directory1.example.com:636
     dpconf create-ldap-data-source Sun2 directory2.example.com:636
     dpconf list-ldap-data-sources
       Sun1
       Sun2
     dpconf create-ldap-data-source-pool Sun_internal
     dpconf attach-ldap-data-source Sun_internal Sun1 Sun2
     dpconf list-attached-ldap-data-sources Sun_internal
       Sun1
       Sun2
     dpconf create-ldap-data-view Customer_data_r/w Sun_internal ou=Customers,dc=example,dc=com
     dpconf create-ldap-data-view Partner_data_r/w Sun_internal ou=Partners,dc=example,dc=com
     dpconf create-ldap-data-view Staff_data_r/w Sun_internal ou=Staff,dc=example,dc=com
     dpconf set-ldap-data-source-prop Sun1 is-enabled:true
     dpconf set-ldap-data-source-prop Sun2 is-enabled:true
     dpconf set-attached-ldap-data-source-prop Sun_internal Sun1 search-weight:100
     dpconf set-attached-ldap-data-source-prop Sun_internal Sun2 search-weight:200
     dpadm restart C:\Program Files\Sun\JavaES5\ldap-proxyI have now been scratching my head over this for several days, and I have installed and re-installed the server several times on the different computers. I have also had a problem registering the DPS with a remote DSCC; checking the cacaoadm I see:
     cacaoadm status
       default instance is ENABLED at system startup.
       default instance is not running.
     cacaoadm start
     cacaoadm status
       default instance is ENABLED at system startup.
       Current retries count : 1/4
       Processes:
       2452
       Cannot connect to agent: Unsupported protocol: jmxmp
     cacaoadm verify-configuration
       CONFIG ERROR   : Java Dynamic Management Kit home is not valid, Cannot locate [lib] inside [C:\DOCUME~1\ADMINI~1].Any help that can be given will be greatly appreciated; thanks

Hi,
The error message indicates (not very clearly I agree) that DPS could handled the request but could not contact the appropriate Directory Server (no connection).
There are several possible reasons for this.
First is directory1.example.com a valid fully qualified domain name on your machine. I.e. does this name resolve into an IP address ?
Second the host:port used for directory1.example.com is 636 which is the default secure LDAP port. This implies that you probably wanted to have a secure connection between DPS and the Directory Servers.
Well, dpconf has no way to specify that the port is intended to be a secure one. And will always consider that the port specified is the regular LDAP port. (I opened a bug about this and I hope it'll be fixed in 6.1).
Secure connections and information must be configured afterward.
To configure SSL between DPS and an ldap-data-source, please refer to the Administration Guide : <http://docs.sun.com/app/docs/doc/819-0995/6n3cq3b3q?a=view>
As for the jmxmp issue, it looks like the JDMK component on Windows was not installed. Did you install it with an Administrative account ?
Could you try to uninstall and re-install ?
Regards,
Ludovic.

Error(2): Unable to find class for bean: connection defined by tag...

I created a project, and a JavaBean that connects to the database and I want to use it in a JSP page that exists in my project.
Bean:
package BeerPackage;
import java.sql.*;
public class ConnectionBean
JSP:
<%@ page import="BeerPackage.*" contentType="text/html;charset=windows-1252"%>
<jsp:useBean id="connection" class="ConnectionBean" scope="session"/>
Then I get the error:
Error(2): Unable to find class for bean: connection defined by tag with class: ConnectionBean
When I try to build the JSP
Any ideas?

Seems even though I have an import, I still have to specify the package name in front of the useBean.
What am I missing here?

Entity Framework - unable to select the oracle data connection

Entity Framework - unable to select the oracle data connection from the wizard that allows you to select the data provider. Even though we successfully added a data connection that points to an oracle database, we still can't select an existing data connection or create a new database provider that points to an oracle instance.
we are using both vs 2008 sp1 and vs 2010. We connect to oracle 11g and we use the latest oracle odp.net driver. the Driver is installed and working in vs studio.

I had this exact problem when I started. I think I had downloaded the wrong odbc (the 64x version). When I unloaded that version and downloaded the 32bit version it worked.
Hope that helps. ~ Darla

I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted?

I have done upgrade to 8.1.2. Now iPad a iPhone will will not connect to iTunes, iCloud or do updates on apps.Shows message "unable to connect" or "error in connecting" as well as "unable to verify". How can this be sorted? Thanks

Hi,
Thanks.
I have tried signing out and in, still does not work.
Still just get the previously mentioned "messages".
I wanted to restore, but then you have to turn off "find my ipad/iphone" but this is not allowed, as I cannot connect to the itunes/icloud or app store. The units work with current apps. EG; email etc, and with apps that do not require current updates.
Thanks

BOXIR3- Unable to log on : Could not connect to server - FWM 01003 null

Hi
I've just installed for the third time BOE Premium Server XIR3
Config:
Windows Server 2008
BOXIR3
CMS on MySQL
Tomcat 5.5
I've installed from scratch my server and I could not connect to any application
CCM : the SIA is up and Running, but I could not manage server to see what is launch on the server
> Error : Unable to log on : Could not connect to server SERVER_NAME:6400. Please check that the server name is correct, and that the server is running
Tomcat Configuration: Can't connect to that services too
-->Error : Unable to open the service BOE120Tomcat
CMS / Infoview : Unable to connect too.
--->Error : The server SERVER_NAME:6400 is not found (FWM 01003) null
(Here I translated the error message because I've got the message in french...)
Concerning the MySQL database, it's seems to be correctly installed as I can access the database via MySQL Admin tool.
I've seen lots of similar issue but I never found any resolution or workaround.
So If you have any ideas to help me it would be great as I must make a demo on customer site on monday morning :o(((
Many Thanks
Anne-MArie

Hello,
Please refer to the following KBAs, may be this can helps you:
http://service.sap.com/sap/support/notes/1884899
http://service.sap.com/sap/support/notes/1351898
And as Sneha said, make sure that the SIA and the CMS don't use the same port number.
I hope that this helps you.
Regards,
Asma

Nokia701 unable to connect to a WPA2 connection

Similar Messages

Maybe you are looking for