NokiaMServer and audio files watchup

I noticed that the NokiaMServer application opens and holds the audio files open. I was concatenating multiple audioclips into one single audio file in my music folder. The process ended after some time to a disk write error. After some retrys and disk checking I started to wonder if the resulting file was opened by some other process, because I couldn't delete or rename it. I found then ProcessExplorer, which pinpointed that NokiaMServer.exe was holding ny result file open. After killing the process the concatenation process went through with no problems. If you have had weird problems with audio files, and I assume that the same might happen also to image files as they are also watched by NokiaMServer, kill the process and retry.

Hey,
Cud u pls xpln ur issue in detail.... Ur operating system, exact step by step procedure etc.,
If my post helped you, click on Kudos button and if my solution provided is opt 2 u, accpt my solution

Similar Messages

  • How to transfer video and audio files from windows PC to new ipad?

    How to transfer video and audio files from windows PC to new ipad?

    iTunes: Syncing media content to iOS devices and iPod
    Sync with iTunes.
    Connect the iPad to the PC and launch iTunes.
    Click on the iPad name on the left side under devices.
    Click on the Music Tab on the right.
    Click on all of the albums, artists, playlists that you want to sync
    Click on the Sync Music Heading.
    Click on Apply in the lower right corner of iTunes
    Follow the same procedure for Movies.

  • Cutting and saving individual video and audio files from a clip

    I have to cut 201 individual video and audio files for separate scenes from an 11-minute animated episode and save them as separate MP4 video and MP3 audio files. What is the most efficient way to do this?

    Without knowing more about your project, it's hard to even guess at the most efficient workflow.
    Like: Do these clips have audio or are you adding it? What format are these clips? What is the intended delivery for the 11 minute movie?
    As a general matter, one creates an event, imports clips to it. Then organizes the clips according to the needs of job, using keyword collections and ratings. Then creates a project and starts a rough cut by marking ranges in the event browser and editing to the time line. Some people start with the music, making that the primary storyline mark where they want the edit to be and cut to that.
    Upon finishing, one can choose one or more of the "destination" presets. It's possible to export Audio only or Video only or both. MP3 is one of the audio choices. Some of the presets are MP4. If you want possibly better quality and more control, export the files as master files and encode in Compressor.
    Good luck.
    Russ

  • Video and audio files hosted on your site

    It would be great to be able to host your own video and audio files and not have to rely on YouTube or Vimeo.  Design a widget to for ease of use.

    Yes, you can easily work with only audio or only video from a video clip in Premiere Elements.
    How you do this depends on which version of the program you are using.

  • Images and audio files in a database

    how does one put images and audio files in oracle 8? What are the data types going to be in the tables for images and audio files..?
    null

    One of the most important reasons that one would choose to store multimedia in the database is to be able to manage this content safely and efficiently. Having multimedia in the database allows you to use database itegrity techniques to keep your data safe and consistent. If you choose to use BFILE storage, you will NOT have these advantages. You will have to back up the database, and the filesystem(s) where the multimedia is stored, and devise a way to keep this data consistent. You will not be able to rely upon the database backup entirely, you would need filesystem backups to be coordinated with database backups.
    I would suggest that you store the multimedia in BLOBs within the database.
    From the LOB application developer's guide:
    * External (BFILE) LOBs do not participate in transactions. Any support for integrity and durability must be provided by the underlying file system as governed by the operating system.

  • How to create table and insert images and audio files ...

    hello to all , i am doing my b.e cse .
    at current v r studing DB and pl/sql codes ....
    i just need to know simple way of code to insert images and audio files in a table .
    i tried some of these ,
    CREATE TABLE myTable(Document varbinary(max))
    INSERT INTO myTable(Document)
    SELECT * FROM
    OPENROWSET(BULK N'C:\Image1.jpg', SINGLE_BLOB)
    but not workiing
    it shows some errors.
    i use oracle 10g. thank u :) and also i tried using blob and bfile datatypes , table created but cannot insert values !
    ROBOK

    hello to all , i am doing my b.e cse .
    at current v r studing DB and pl/sql codes ....
    i just need to know simple way of code to insert images and audio files in a table .
    i tried some of these ,
    CREATE TABLE myTable(Document varbinary(max))
    INSERT INTO myTable(Document)
    SELECT * FROM
    OPENROWSET(BULK N'C:\Image1.jpg', SINGLE_BLOB)
    but not workiing
    it shows some errors.
    i use oracle 10g. thank u :) and also i tried using blob and bfile datatypes , table created but cannot insert values !
    ROBOK

  • I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    I am trying to use the auto audio-sync feature. When I select the video and audio clip to be synced FCPX says its syncing them and then once finished (at 100%) no compound clip is created and the video and audio file do not sync. Any help is appreciated.

    Hi
    In iMovie'11 (version 9.0.x)
    on top menu row - Apple/iMovie/File/Edit/Cut (Can vary dep. on language - in Swedish Apple/iMovie/Arkiv/Redigera/Klipp . . . )
    down Cut menu - Slow playback/Raspid Playback/Re-play in Slow Motion and onvards
    Here one can select the Pre-Set speeds
    Are you familiar with getting 'inspector' to run?
    No - but I guess that Double Click on clip/sequense or ctrl-Click on it might open it.
    Yours Bengt W

  • Downloading images and audio file using java

    Dear All
    I have a directory on my webserver which contains images,audio files and many other data files.
    I want to download all the file but the problem is when i download image and save it, it is not viewable. I dont want to use Image class as i may have to downlaod audio files too. Please guis which stream shouldi open to download any kind of content using same code.
    Thanks in advance. And if u have some example please let me know
    Regards
    Jafery

    downloading images and audio file using java -------------------------------
    how to write it back to dataoutputstremI don't understand what you are talking about.
    Server: DataOutputStream -> Client: DataInputStream -- the two is a pair.

  • "Error Result code = -43" AND "Audio file not found"

    In Garageband I was trying to  click Join, but kept getting "Error Result code = -43"
    What does this mean?
    Also, I thought saving the file and restarting Garageband would help, but upon re-opening the program BIG problem: the file (just this one, others are opening fine) has this error message upon opening "Audio file “07 I See the Light.aif” not found!"

    mcgregorsgal wrote:
    so do I have to basically start over?
    for that one recording, it looks like it.
    the error -43 is a system level error, so i HIGHLY doubt this will help, however you can ctrl-click the project file, choose Show Package Contents, open the media folder and preview any audio files in there to see if the missing file is there, but in all likelihood, you will need to re-record it

  • How do I play a video and audio file at the same time on Apple Tv?

    I need to play a video loop (with no audio) on my apple tv and also play some music in the background. Its a video loop with no audio and then I need music to play in the background. The loop needs to repeat all day because its only 5 min long and the audio is an entire play list that's several hours. This is for a lobby flat screen setup.

    QuickTimeKirk wrote:
    Very difficult request because the Apple TV can only play one file at a time. It doesn't have a "loop" feature.
    You could use QuickTime Player Pro to "join" the audio files into one file. The hard part would be adding the five minute video chunks via copy/paste as each would be added as a new "video" track. QuickTime .mov files can have up to 99 "tracks" and the .mov container is supported by Apple TV.
    So this new file would have a new video track (actually just a copy of the original) that played up to 98 times. A five minute source video would end up being a bit over 8 hours in duration.
    The 98 track video could be "flattened" into one video track via export. The same for the audio track movie.
    Other options:
    Set the Quicktime Loop flag in the movie inspector properties.
    Make a video playlist, adding the file to the playlist lots of times - make sure playlists are enabled in Settings for video not just music.

  • Is anyone else having conflict with 10.8.2 update and audio files?

    I recently updated from 10.8.1 to 10.8.2 (big mistake).  Now my digital interface has all of these random clicks and pops.  Worse yet, when I try and play my audio files (Digital Performer) or ITUNES that music stops, starts, stutters and is basically unlistenable.  Before the update everything ran smoothly.  I talked with the tech support for my digital music application (Digital Performer) and he thinks there is a conflict with the latest Apple update too.  Is anyone else having these problems?
    To get back to 10.8.1 do I have to wipe the hard drive and re-install everything?  I use my Mac for music production so this is killing me.  Any ideas?

    I once again reloaded 10.8.2, all of the current firewire, USB, and printer drivers (why not make sure those are up to date too, what have I got to lose?).  Checked the cables, the Mac firewire ports etc.  No change.
    So I bought a cheap back up firewire drive (Western Digital, My Passport Studio-about $100).  That worked perfectly on the firewire port of my Mac Pro.
    I hooked up my MOTU 828 firewire audio interface into the Western Digital's second firewire port, and everything works perfectly.
    I wish I had known that daisey chaining devices would solve my problem before I spent $500 on a new firewire interface.
    If you are having similar problems with firewire connection, then try daisey chaining through a device that has no problems.  Who knew a solution could be so simple?

  • Web Calendar and Audio Files?

    What happened to the "search" button? anyway's can anyone please give me some links, tips etc. to creating:
    1) a calenadr that is easy to update. I want a visual calendar that will have 30 or 31 days that I can put info into. Would you just create a "table" and do it that way? Any advice is approeciated!
    2) A pastor needs to have their sermons on the web. how would I do this? The sermons are on CD. I have seen QT audio files on the web but how would I set this up in Golive?
    Thanks

    Need to see your code for accessing the file.

  • Separate drives for samples and audio files..?

    Hello all
    I am moving to Macbook Pro (previous gen) with Logic Studio after years of PC (feel like I’m standing on the edge of a precipice staring anxiously down!). Will be looking to use it live in our 3-piece band to run existing MIDI Files and live triggered BFD drum samples
    Have decided on getting an Echo AudioFire 8 to handle the necessary Audio outs and MIDI connections and will be replacing our rather dated Korg 05R/W General MIDI module with virtual instruments / samples libraries
    I am thinking that once the Bass (probably Orange Tree CoreBass samples through Kontakt 3) and Orchestration (still wide open to suggestions on that!) are done, they’ll be exported as Audio files or perhaps ‘frozen’ in Logic to ease the load on real-time processing
    Here’s the query then:
    *Assuming that the internal drive will be for OS and programs only, will having the sample libraries and exported audio song files on separate physical drives from each other pay dividends – particularly when considering that the audio tracks (probably no more than two or three stereo files) will be streaming whilst BFD is triggering live samples via MIDI input..? I’m wondering if the samples and audio separate drives situation will be considerable beneficial, or given the intended application, would this approach be merely over-speccing things?*
    If that is thought to be the best approach, what do you believe to be the best way of hooking these up? I plan on using the FW400 port for the Echo AudioFire 8 and have ordered a Sonnet Express eSATA Card to hook up an external drive. Should any additional drive look to use the FW800 port or should I simply tag into the spare eSATA port on the Sonnet Express Card..? My concern with the latter is that a bottleneck would occur in the Express port and defeat the whole object
    I would really appreciate any thoughts on this
    Many thanks
    Clive

    My opinions:
    If you're really only talking about 2-3 audio tracks per song, having them on a separate drive is not going to make that much difference. I'd recommend just using one drive for both audio and samples for now, you can always add another hard drive later if you're getting disk errors, or if you start using more audio tracks.
    If you're looking for a good orchestral library, I recommend Vienna Symphonic Library Special Edition (about $500). VSL sounds great, and this particular set is much cheaper and still gives you a good amount of instruments/articulations.
    If you do go with a third drive, use both eSATA ports. Even with a little bottlenecking, you should see substantially faster performance than with FW800. The data transfer rate of eSATA is over 3 times that of FW800.
    Message was edited by: jdredge

  • ObjectMedia partialTriggers and audio file

    Hi,
    i have a problem using <af:objectMedia refreshing the media object.
    Audio file must change by clicking reloadAudioButton but the player is not visible and "*/" is shown.
    Refreshing the page with F5 (or reload browser button) it works.
    In my jspx:
        <afh:cellFormat> 
              <af:panelHorizontal halign="center" valign="middle"  partialTriggers="reloadAudioButton">
                         <af:objectMedia  autostart="false" rendered="true" contentType="audio/x-mpeg" source="mybean.getFile"  controls="minimal"  width="150px" />
                         <af:commandLink id="reloadAudioButton"  partialSubmit="true" action="" immediate="true">
                                <af:objectImage source="myimage.jpg" shortDesc="...."/>
                           </af:commandLink>
                   </af:panelHorizontal>
         </afh:cellFormat>  It works with Firefox but not in IE (6 and 7)
    I tried putting partialTriggers directly on objectMedia and adding to the file url a parameter containig the timestamp and don't work.
    Thanks,
    Francesca

    Hi,
    can you try invoking the partial refresh programmatically ?
    1. Create a JSF binding from the objectMedia to a managed bean
    2. In the managed bean have a method that calls
    AdfFaces.getCurrentInstance().addPartialtarget(referenceToObjectMedia);
    Somethimes this refresh is stronger than the declarative refresh
    Frank

  • {Solved} Xorg7 gnome nautilus and audio files (O MY)

    Well do you all know how in gnome using nautilus if you move the mouse over an audio file it begins to play the file? Well i installed xorg7 and this feature no longer works...also my icons have all disappreaed so I install the glass icon theme from gnome-files. I would really like to re-enable the audio file feature...and if i could get all the orginal gnome-icons working again it would be great
    thank you for your time!

    Moo-Crumpus wrote:
    Suddenly, my archlinux lost the sound files feature, too, and I just dropped in in search for an answer.
    Afaik, you need pmg123 / mpg321 and enable esd.
    Aha! Thank you very much! That did the trick!

Maybe you are looking for