Nokis asha 225 feed back problem

Hello there.
I have just received a new mobile phone for work - Nokia 225 dual sim. A few days later I got this message - see in the attachment and I can't get rid of it! It asks me to "Rate your NOKIA 225". Unfortunately I have already rated it 5 times and the message is still on the screen. There is no message in the inbox regarding this issue.
The message dissapears when the phone is turned off and on again, but in a few minutes - it's there again!
There is no info in the manual neither nokia support page, so I thought maybe here I may get any answer?
Thank you very much in advance.
Regards
prince islam
Attachments:
IMG_6669.jpg ‏617 KB

I have given up to determine the Internet APN of network provider in India … therefore
do you know your Internet APN for your type of contract? Furthermore, please,
dial *#0000# to determine the firmware version of your Nokia (just the Vxx.xx.xx line please). Finally, we need the
Nokia Product Code, which is printed below the battery (CODE: 7-letters).

Similar Messages

Using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

using apple iphone 5, i observe today that display shows yellow border when i choose option in setting as erase all content and setting, iphone goes in to starting mode, i want to know is there any problem to display, plz give me feed back urgently

I had this same thing happen to me. I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen.

Microphone feeds back and distorts in VOIP apps on Touch

I have a problem with the microphone feeding back into earphones in VOIP apps like Fring and Truphone. Sometimes I can fix it by repeatedly pressing the remote button. Now that Skype has been released, I find I can eliminate the feedback by pressing the "Speaker" button in the app that appears when the call is connected. Its a usable workaround, but has anyone else experienced this problem? I haven't seen anyone mention it on these discussion boards.

I have the same problem. This also happens in recording programs, such as Gigbaby and Sonoma's Fourtrack (which is incredibly annoying).
With Gigbaby, I usually end up just trying to record until it doesn't have that distorted, octave-y drudge. Which is a solution, but not a very good one.

From which table feed back partner and root cause partner

hi,
can any body tell me ,from which table feed back partner and root cause partner
can be find.
i need to add this in datasource 0crm_sales_act_1.
thanks in advance.
regards,
sridhar M

It is always advsible to use function modules in CRM instead of making direct table access. Unlike R/3, CRM tables and buffering are quite complex.
In your case, to read the values of maintained Sales Areas, use the function module <h5>CRMA_BUPA_GET_SALES_AREAS</h5>
The function module takes the BP Guid (BUT000-PARTNER_GUID)
However you can also find your information in tables<h5>
CRMM_BUT_LNK0011 - BP Sales rule list
CRMM_BUT_LNK0010 - BP Sales rule list
CRMM_BUT_SET0010 - BP Sales rule set</h5>
Hope this helps.
Easwar Ram
http://www.parxlns.com

Having drop frame error messages when in playback mode?any feed back on what i might do , Idont have a serial number and Im currently not upgraded ththe 10.03 i am in 10.00?

I am getting drop frame error messages when in playback mode (final cut pro 10)? Any feed back on what i might do , I dont have a serial number and Im currently not upgraded to the 10.03 I am in 10.00. I inherited the finalcut pro from my old computer and now have the IMac 27! ant suggestion other than upgrade!
chevas

If you have FCPX (10) you can upgrade for free at the MacApp Store.
Did you click "proxy media" when importing? That will help playback.

I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate inform them but not received any feed back from their side, please advise and protect my Ipad.

Dear Sir,
I have forgot my I pad In saudi airlines SV883 , on 09-09-2012, then I have immediate informed them but not received any feed back from their side, please advise and protect my Ipad.
LOCATION : SAUDI ARABIA. DAMMAM - I have travelled from KOZHIKODE TO DAMMAM.
I HAVE KEPT MY IPAD SEAT POCKET#42H, ,
I have tay it several time thru ICloud still it's in offline.
Saudi air lines customer support services not responding properly,
You are requested to protect my IPAD and advice for the next.
* Can I get back up files from that IPad.,
waiting for your prompt reply as soon as possible,
best regards,
ZAMEER MAIDANI
<Personal Information Edited By Host>

This is a user-to-user technical support forum. We can't do anything to "protect" your iPad. If your files are backed up (and only you would know if so and where) you should be able to access them from your back up.
Did you have Find My iPad enabled?

Would love some feed back

I would by no means consider myself a gamer, perhaps 10% of my imac usage is games call of duty 2 and tomb Raider, am satisfied with how these games run on my 17" imac with ATI Radeon X600 Pro with 128MB DDR SDRAM; PCI-Express. Taking in consideration the improved processor and front side bus would I see any improvement in graphics performance with the new April '08 base 20" imac with ATI 2400XT.
Why not move up to the 20" 2.66GHz model, a very tight budget to sum it up.
any feed back or suggestions are welcome.

Surf to http://marketingtactics.com/Speedmark/
Search for "17-inch iMac G5" which is your current machine. Note the numbers.
Go back to the top table and look at the numbers for "20-inch iMac Core 2 Duo/2.4GHz (April 2008)".
Very short answer: Twice as good.

I installed dragon (am using windows 7) on my macbook and got a feed back squeal, uninstalled dragon and squeal continues.

If I turn the sound level down I only get the feed back when I put something over the left speaker. With the sound turned up to 70% or more the squeal is constant.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

My 5 is making a feed back like noise when I make calls and the person I'm calling can hear the noise.

My 5 is making a feed back like noise when I make calls and the person I'm calling can hear the noise.

will someone from HP revert? need urgent solution please!!

Play back problems since the upgrade to iOS

Since the latest iOS upgrade to my 64 GB iPod touch, I've been having play back problems.
Random songs will stop playing at random points....sometimes it just does quiet while the time clicks by.....other times it starts playing the next song, but still showing the current song display and song time line....it's all very strange. Has anyone else been having similiar issues?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Apple Support ignores me completely, there is no way I can complain about lack of feed back and I even have paid for a protection plan!

I have paid for an extended support through the Apple protection plan. Frankly I do not understand what I´ve paid for as there is no support and no plan, except ignorance and waiting time.
I have had and still have serious problem with my Mac Book Pro, and spent loads of money on phone charges with mainly negative results. All I have "achieved" is wasted time. I just wonder if it is only me who feel totally helpless as the Support People are not really helping. I´ve spent approsmimately 200 USD in phonecharges on their support phone, so far. But that is nothing compared to the hours spent waiting for answer and listening no absolute nonsense. Finally I went to an Apple store who sent the machine in for repair, and one fault was the motherboard. However I could still not connect with my Time Capsule and Aperture seemed to have lost all my photos. This all happende after upgrading to Mountail Lion. Also the cable network isn´t working. I can easily see on the net that I am not the only one with problems. I´ve ended up with solving most of this myself, except the network connection. It is still not working.
I am actually deeply dissapointed with Apple and I cannot find any way to even forward a complaint. Not that I believe it would help, but at least I´ve tried. I also think it would be fair to to get my money back for a product I´ve paid for which obviously isn´t working, namely the Apple Care Protection Plan.

Hi, so you suggest I should be grateful for getting what I have paid for? Sorry but that's only getting what I paid for. Add to that, that this has been against the phone support I've used a lot of time and money for! I don't feel anything but hopelessness for the total lack of customer support. An expensive Mac Book Pro shouldn't fail after 2 years in the first place! But failure may of course happen with the best products, and Apple as well. The real fault however is Apple's arrogance and failure to fix it! Instead of getting help and guidance to a solution, I used hours and lost days of work, and was made to pay a lot for total unusable "assistance". I was even adviced to hold back on taking the Mac Book Pro to a store, as I was told the support person a senior, would figure it out. Well Apple definiately squezzed the lemon! Since the Time Capsule/Time Machine system didn't fuction I was also in a stale mate as I needed assurance that My files wasn't lost when delivering the machine for repair. I was adviced that could happen. Quite a deadlock wasn't it! As an expert on Quality Assurance I was also suffering lost revenue in my work for clients. I finally had to buy a Samsung Ultrabook as working machine and backup, a neccesity as Apple obviously cannot be trusted when needed. Bill Gates and Windows has one advantage over Apple, they know things can go wrong and hence have much better support. Apple support is a maze were only the strongest and most persistent get through. I am one as I didn't accept being treated like that. That's the only reason I finally got a repair. However the machine is still not functioning as mentioned. I have a case number, a phone number and mail address to a senior support person, whom I've been trying to contact for more than a week, He has still not responded to my mails or phone calls. I cannot even figure out how to contact Apple to complain about such ignorance. Note by the way that here in Norway I must pay to call support and more often than not there is more than half an hour waiting time. I might spend hundred of dollars in that "game" without even knowing that I will get the support I've paid for and only keep paying even more for wasting my time! This is simply not good enough, it is no less than arrogant and wrong! I frankly think Apple is doing a big mistake with such por treatmen of their customers.

Nokia Asha 206 Phone memory problem.

I have a Nokia Asha 206. Recently I updated it. After the update now out shows phone memory full all the time though I don't have any file in phone memory accept those which I could not delete. Please tell me how to solve this problem cause even if anyone sends me text msg it does not come to my phone cause memory is full. Even I can't send any msg. Everytime I try to send or receive something it showed memory full.i have external memory having 700mb free space but only 37kb internal free space.

Hi, wasimul. Welcome to our community. We suggest deleting some of your files like photos, videos, and text messages that you no longer need. You can also save your contacts directly to the memory card to avoid such issue. Another option is to reset it to its original settings. Here's how: Restore factory settings. The link is still applicable regardless of your location. We look forward to your reply.

Performance "throttle back" problem.

OK, so I know the MB Air isn't designed for this, but I've been playing World of Warcraft on it for a while. What I notice is that the performance is decent for about 10-15 minutes (~10-15 fps) but eventually degrades terribly (~3fps or less). During this time the fan is going nuts (~6200 RPM according to my status widget) and the back/left of the base gets hot.
I've read that the MB Air will shut down one core and throttle back the clock speed of the remaining core when it gets hot. Is this true? Can this be bypassed somehow? If so, is that a really bad idea? I'd prefer not to have to schlep a laptop cooler around if I don't have to.
Your thoughts, as always, are appreciated.

Eric,
A few MBA users have been experiencing similar issues, not necessarily while playing World of Warcraft, but using other CPU and I/O intensive applications, check out this question: Kernel_task on a new MacBook Air
Do you mind trying a few things? I think temperature is the answer. Can you measure the temperature? Also, what other processes do you notice taking up CPU time? Is kernel_tasks one of them?
I think the problem is a combination of the temperature, perhaps a "busted" SMC and poor CPU management by the kernel. My friend has an MBA also and we have both experienced this issue in a variety of situations. I am almost 100% certain that the issue is temperature related, but is also caused by a buggy SMC. I think the SMC is having trouble with the temperature threshold and prematurely shuts off a core. I stress prematurely because I know CPUs should be able to handle temperatures in excess of 200 degrees Fahrenheit, approximately 100 degrees celsius. The application Temperature Monitor, tells me that the upper limit for each core is exactly 100 degrees celsius. In all my tests I have never passed 186 degrees fahrenheit, which is roughly 85 degrees celsius.
Any additional readings, tests and experiments would be greatly appreciated.

Feed validation problem

I would like to change some of these areas on my podcast such as add in artwork and the author title. Also in order for my feed to validate, it is imperative that I place my email on line 14. How do I access this? How can I get it done?
1. ?xml version="1.0" encoding="UTF-8"?>
2. <rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" version="2.0" xmlns:atom="http://www.w3.org/2005/Atom">
3. <channel>
4. <atom:link href="http://glenwoodspringsbaptistchurch.org/sermons-2?podcast" rel="self" type="application/rss+xml" />
5. <title>Glenwood Springs Baptist Church Podcast</title>
6. <itunes:author></itunes:author>
7. <description>A Loving Church With A Living Saviour</description>
8. <link>http://glenwoodspringsbaptistchurch.org</link>
9. <language>en-us</language>
10. <copyright></copyright>
11. <itunes:explicit>no</itunes:explicit>
12. <itunes:owner>
13. <itunes:name></itunes:name>
14. <itunes:email></itunes:email>
15. </itunes:owner>
Thank you

You are missing two '/' signs and a space before the first one (this forum may wrap the line at the end of the first tag and mask the space, which comes before the '/>). Lines 41-44 should read:
<enclosure url="http://75.70.159.190/~bpettis/podcast/episodes/WAKepisode02.m4a" length="2212005" type="audio/x-m4a" />
<guid>http://75.70.159.190/~bpettis/podcast/episodes/WAKepisode02.m4a</guid>
<pubDate>Fri, 07 Aug 2009 01:53:00 -0700</pubDate>
<iTunes:duration>2:26</iTunes:duration>
The absence of these means that the tag is not closed and so the next line looks as if it belongs to the unclosed tag. This can be enough to mess up the feed, though I dont know whether it's the entire problem; it's a place to start.

Where does ATP feed back from APO gets stored (in which table) in R/3?

Hi ALL,
I am facing problem in finding in which table the response in R/3 gets stores after ATP check is done in APO?
I will be grateful, if you experienced guys can help me find it?
Thanks in advance
Reetesh

I would be surprised if the ATP feedback from APO gets stored in R/3 table. When a product location is flagged as GATP relevant, and when say a sales order is created in R3 (or any other business event flagged as ATP relevant) an RFC call is done to APO system and all calculations are done then and there in APO-- only confirmed quantity is sent back to R3. What you see in R3 is confirmed quantity and there is no other thing sent back to R3.

Nokis asha 225 feed back problem

Similar Messages

Maybe you are looking for