Nomad 3 is crashing windows when connected via firew

My (old) nomad 3 is crashing my Windows XP Pro SP2 whenever I connect it. It wasn't doing this a few weeks ago, and I'm not aware of any changes I have made, is there a solution to this at all?thanks

Hi,
According to your description, my understanding is that print can’t be done by command line “xlp –d…”, but can be done by windows printing.
I haven’t found any introduction or explanation about the command line you mentioned.
You may try the command line below to print:
print [/d:Printer] [Drive:][Path]
FileName [...]
Detailed information about the parameters you may reference:
https://technet.microsoft.com/en-us/library/cc772773%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
If I have any misunderstanding about your question, could please provide me related link or more explain about the command
xlp -d //PRINTER_SERVER_NAME/PRINTER_NAME ? Does this work correctly when disconnected from VPN?
Besides, is there any error message? 
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Similar Messages

  • TS4062 iPad3 crashing WinXP when connected via USB?  Ideas?

    When I try to connect my new iPad next gen to my WinXP via USB the PC crashes.  (Pause while laughter dies down)  Any ideas on what may be causing this?
    Thanks

    Hello xavi131,
    I understand that your iPhone 4s is not recognized by iTunes. The following article may help to resolve your issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks,
    Matt M.

  • Iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB

    iphone 4S - Windows Vista - 64 Bit (and photoshop elements 9.0) is not recognizing my iphone as a camera - therefore I cannot download pictures from my iphone. iTunes works fine with the iPhone, but I do not see it in "My Computer" when connected via USB.  I already tried uninstalling and reinstalling iTunes....still nothing.  Any ideas?

    Thank u verrrrrrrrrrry much FoxFifth u save my life thank u.

  • My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

    My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB.  I have reinstalled iTunes to no avail.

    Hey, I may have to if I can't get this one to work!!
    I have tried a different USB to no avail.  Both cables work on my old Dell so I don't believe they are the issue. 
    I uninstalled iTunes as directed by Apple Support and reinstalled.  Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs. 

  • 10 3.9 - external drive crashes PB when connected by USB or FireWire

    Subject says most of it... "10 3.9 - external drive crashes PB when connected by USB or FireWire"
    Details: I have one external drive which, when connected to my PowerBook via either FireWire or USB, causes the computer to lock up with the message: "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button." The same thing happens whether the drive is there on bootup or if it is connected later.
    The drive worked fine until yesterday, when I stupidly installed Windows Media Player even though the internal drive was almost full. It took a while, but I discovered that disconnecting this particular external drive made everything work again, though slowly.
    Then I freed up 15GB on the internal drive, and everything works normally _unless that drive is attached. Another drive connected the same way works fine.
    I have searched around on this message but have yet to find the way out. I did figure out what the first question will probably be, so here's the answer:
    The "kernel panic message" each time seems to be the date and time and then "localhost /usr/libexec/panicdump: Error (-1) setting variable - 'aapl,panic-info'"
    Where should I start?
    Thanks.
    15" Powerbook   Mac OS X (10.3.9)   External drives connected via USB or FireWire

    Still hoping for some sort of advice here... Have tried many approaches but can only confirm that simply connecting that particular drive (or enclosure?) always gets an immediate shutdown.
    Thanks for anything,
    Steve

  • The iTune Remote App has stopped finding my iTunes library when connected to wifi from my main router, but works fine when connected via second wifi router on the same network (different SSID)

    I'm running iTunes Remote App from a couple of iPhone 5's and a first generation iPod Touch. iTunes is running on a PC - Windows 7. My home network runs two Wifi Routers, each with a different SSID. I've had no problems with the Remote app running this set up for the last 8 months but recently the App can only find my iTunes library when the iPhone/iPod is connected via one specific router, when connected to the network via the other router, no iTunes library is found. I'm also running an Apple TV and it's the same as the iTunes Library, only visible via the one SSID.
    Everything else seems to work fine when connected via either router, eg Internet on the iPhones (definitely via wifi)
    I've tried renewing the lease on the iPhone wifi connection, restarting everything.....several times.....
    It used to work fine, this only seems to have been a problem in recent weeks
    Any help or advice would be much appreciated
    Thanks
    Ian

    It turned out to be the firewall settings on our router. Her machine was sending traffic that our router interpreted as a DoS attack and blacklisted her Airport's MAC address. That's why it would work fine if she switched to Ethernet.

  • 10.6.1: Can't resolve FQDN when connecting via WLAN / Airport Base Station

    Hi everybody,
    after hours of work and having read many helpful topics in this forum (and other) I've successfully setup a Single Signon Environment for my home office. It's a dual core macmini server running 10.6.1 and only mac clients.
    The server is connected via switch to my airport extreme base station. This airport station uses PPPoE to connect to my ISP and it has the DHCP service running, handing out the clients' IP addresses. The server and the switch have all static IP addresses.
    My issue is the following:
    Whenever I connect via wifi or vpn using my MBP, I am not able to "bind" to the server (via system preferences : users : login setting) using the FQDN. The error is "can't resolve address. -2200" Instead it only finds myserver.local - and then I am able to set up my wifi connected client.
    However, when I set up the client with the .local address I am unable to get a kerberos ticket for my users. The ticket viewer says, that it can't resolve the address for myserver.mycompany.private
    I was able to get afp or ical to work on my vpn or airport connected clients when I used the server's IP address instead of a domain name - but only with kerberos turned off and with other problems.
    I've heard that if everything is configured right, the server should show up in every clients' sidebar with its FQDN and NOT the bonjour name. Right now it shows only the bonjour name - even on the clients connected via Ethernet.
    The other strange thing is that when I log into my client system I still have to authenticate with ticket viewer in order to get my kerberos ticket. Usually Single Signon should work with the login window, right?
    I really don't know what else to do. I double checked my DNS settings and everything seems ok. I entered the FQDN of the my server in the airport stations' DHCP settings as "LDAP server" - nothing changed...
    Do I need to use the server's DHCP service instead of the airport station's DHCP? And if I do this, how to I turn off airport's DHCP? It does not seem to be possible when connected via PPPoE to my ISP.
    I am unsure what to do in order to get things to work. Anybody out there who can help?

    Hi Davidh and thanks for posting!
    I had 3 DNS entries in my client's network settings - one was the server and the other 2 were from my ISP. Removing the ISP's DNS entries and keeping the server DNS IP solved my kerberos issue. Wow!
    I'd never thought that it won't work with more than the server given as DNS entries. I'll need to check this with my iPhone later, because I had a similar issue with that device yesterday when trying to connect via VPN.
    Thanks very much!
    Still one question:
    The sidebar of my clients still don't show the server's FQDN - but only its bonjour name. Is this right? I read in another forum that the client's sidebar should show the FQDN if everything is configured right.

  • Computer is crashing (freeze) when connecting my iPod Nano

    Hello,
    my computer is crashing (freeze) when connecting my iPod Nano. I have a Pentium IV with windows XP Pro. Can anybody help me please.

    This came from another thread, but worked for me.  Problem is with newest iTunes 4.62.  Unistall iTunes, as well as its helper programs (Apple Application Support, Apple Mobile Divice Support, and Apple Software Update).  Reboot, and reinstall iTunes.  It will reinstall all the other ones and you should be able to connect your nano.  Good luck.

  • Users can only connect to RD farm website and cannot remote into terminal server , when connected via VPN

    Hello,
    I have a RD farm using 3 Win 2012 servers (1 broker and 2 session host), for internal use only, have not
    configured gateway for internet access.
    Users are able to connect to RD farm website and remote into terminal server, within office
    but can only connect to RD farm website and cannot remote into terminal server , when connected via VPN
    Its takes long time at securing connection and fails.
    Thanks

    Hi,
    Thank you for your posting in Windows Server Forum.
    First of all I would suggest you to configure RD gateway role on your server and pass all the connection through it because it’s a best practice to use RD Gateway in RDS Farm. 
    Apart from this, if you are not using RD Gateway then you must check that you have successfully forwarded port 3389 for RDS to access via VPN. Also check that you have made configuration under IIS Manager to enable Forms Authentication. Please check
    this link.
    In addition, please refer beneath article for additional details.
    1. How to Access Windows Remote Desktop Over the Internet
    2. Remote Desktop Services in Windows 2008 R2 – Part 3 – RD Web Access & RemoteApp
    (For reference)
    Hope it helps! 
    Thanks,
    Dharmesh

  • How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    How can I transfer photos from LG phone to mac notebook.  Phone appears in iPhoto when connected via USB but selection for download shows 0 photos

    Just open your LG volume up likes its an external HD and drag all photos onto a folder in your macbook Air.

  • TS1591 my classic iPod no longer appears in iTunes window when connected to iMac.  does this mean my device is no longer supported by iTunes? or incompatible with OSX?

    my classic iPod no longer appears in iTunes window when connected to iMac.  does this mean my device is no longer supported by iTunes? or incompatible with OSX?

    Hello stiannac
    Check out the article below for troubleshooting to get your iPod showing back up on your iMac
    iPod not recognized in iTunes and Mac desktop
    http://support.apple.com/kb/ts1410
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Mac pro does not recognize ipad device when connected via usb port, suggestions?

    mac pro running os 10.6.8 does not recognize ipad device when connected via usb port, suggestions?  itunes 10.7

    Here's a troubleshooting assistant: http://www.apple.com/support/ipad/assistant/itunes/
    The most likely issue:  Have you plugged your iPad into a USB port that is not directly part of your MacBook Pro?

  • My MacBook Pro with Retina display displays power point and not other windows when connected to a projector

    My MacBook Pro with Retina display displays power point and not other windows when connected to a projector. Can anyone help out please?

    You should also ask this in the MacBook Pro forum. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro

  • T420 - external 24" monitor DVI- Displayport : not detected when connected via KVM switch

    Hi,
    I've been using a 2port USB KVM Switch from InLine for a long time connecting a mac mini and a macbook pro
    to a 24" LCD. Recently I had to replace the MacBookPro with a T420. Unfortunately the T420 does not detect the
    monitor, when connected via the KVM switch.
    I tried:
    A) T420 -> Lenovo Displayport to DVI-Adapter -> KVM-Switch -> 24" monitor: NO SUCCESS
    B) T420 -> Thinkpad miniDock Series 3 DVI Port-> KVM Seitch -> 24" monitor : NO SUCCESS
    C) T420 ->Thinkpad miniDock Series 3 DVI Port-> 24" monitor - > SUCCESS
    D) T420 ->Thinkpad miniDock Series 3 VGA Port -> 24" monitor - > SUCCESS
    So I have a workaround, but leaving out the KVM switch is not a long term option.
    This is all on Win 7 professional / 64bit
    Using config (A) I then installed the Intel HD Graphics Driver version 8.15.10.2342 16 May 2011
    SURPRISE: during driver install, the monitor WAS detected!!!
    SECOND SURPRISE: after reboot I was back in the old situation where the monitor was NOT DETECTED
    CONCLUSION:
    Seems like a software issue with the Intel HD Graphice driver.
    ANY HINT/COMMENT/HELP highly appreciated!
    Thanks,
    Michael

    hey mgold,
    as the T420 works correctly with the external monitor and with the miniDock ; it is sad to say the the KVM switch is non-compatible.
    I would recommend that you get in contact with the manufacturer of the KVM. At the same time, try uninstalling the current video drivers of your T420 and see if it makes any difference with the KVM if the T420 is running on a generic driver
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • OS X Lion gets kernel panic when connecting via CIFS

    A customer of ours has problems with OS X Lion clients that get kernel panic when connecting via CIFS (Novell OES server).
    Any new on this issue?
    Tycho Sjgren
    Apoio AB

    Originally Posted by tychosjogren
    Sorry for the late response - had to check a few things with the customer.
    They use the latest OES version with all the latest sp and patches applied. They have even tested with the an OES 11 beta with the same result. The OS run as a VM on VMware in 64 bit mode attached to a SAN. Has also been tested as a plain install without VMware. The Lion version is 10.7.2.
    This is how the problem occurs:
    1. Mount the CIFS share - no problems
    2. Use the share - no problems
    3. If the network connection drops you get a message that the CIFS volume has disappeared and you are asked to unmount it. When you do that you get a kernel panic. You can force the problem to happen by turning of WiFi.
    So it is OES2 but which version (SP1, SP2, or SP3)? Interesting as I'd only heard of this with NetWare 6.5.
    Do you (and anyone else experiencing this issue in this thread) know if this has recently started happening, perhaps after the latest November 2011 Scheduled Maintenance patches were installed?
    I'll hopefully be able to do some testing tomorrow but in the meantime I've asked Novell ...
    HTH.

Maybe you are looking for