NOMAD II MG Cab

I have a NOMAD II MG - and really enjoy it. I would however, find another way to connect to my laptop when I am travelling. I do not want to pack and unpack the docking station every time I travel.
Is there a USB cable available for this player?
Thanks,
Zin

I also have a MG and love it. It's given me 4 full years without a single problem. Creative used to make a travel cable that connected the player directly to your USB port, but it is no longer being made. Actually, I think, they discontinued it quite a while ago, like mid-2002. Check out http://www.nomadness.net/nomadIIMG.php

Similar Messages

Lost Nomad Jukebox 1 USB cab

Where can I buy a new one (and cheap too?) Thanks!

It's one of the standard connectors, called a Type B. You need a wire with a Type A to Type B connector.
Don't get a wire with the mini-B connector, which is the newer smaller connector.
You can see the connectors here.

No driver found - Nomad Jukebox Zen Xtra - WinXP

I have used my Zen Xtra for over 2 years now, with the same PC I am currently having problems with. I recently had to do a complete reinstall of Windows (note that I have done at least 2 other complete reinstalls during the life of my Zen Xtra, with no problems). Windows Device Managers sees the NOMAD Jukebox Zen Xtra, but with the yellow question mark and exclamation point. Each attempt at driver installation results in the same problem. The driver ("JB3MV2_PCWDRV_US__30_03.EXE") installs completely, I'm told to reconnect my device so the driver can take effect. When I do, the device is still marked in Device Manager with exclamation point and yellow question mark, and Windows continues to ask if it can find and install the driver. I have told it not to (knowing that I just installed Creative's own driver), with no success, and other times let Windows try to install the driver (hoping it would find the Creative driver that was just installed). No luck. I have even done another complete reinstall of Windows, and tried to install the driver before any other program or hardware installations into my system. No luck. Note that there are no hardware changes between now and when I have done other complete Windows reinstallations. It just no longer accepts the Creative driver. I have also tried to install the driver in safe mode, with the same results. I have also completely removed the Zen Xtra (showing hidden devices in the Device Manager), and tried to reinstall. Firmware version of Zen Xtra was upgraded over a year ago to 2.0.03.
Specifics:
Windows XP Pro SP2
38GB free hard dri've space
Zen Xtra firmware version: 2.0.03

I have the same problem. But when i try to installl it it says he is missing an .nfo file.
I removed WMP and reinstalled WM0 because is crap.
I have Windows XP SP2
I have the newst firmware on it.
Can somebody help me with this because it's annoying not to put any new music on your mp3 player.
I never experienced this before even after formatting my HD.
Almost the same problem as fritzm but not completely because het gets an different error.
I have installed the CD but that doesnt work either.
I have installed the software from the website but that didnt help because he doesnt recognize my player.
Please help!!

CS2-installing error "data1.cab" file corrupt

I have recently reformatted my C drive and reinstalling programs.
I tried to reinstall my CS2 Photoshop, but received error message that the "data1.cab" file was corrupt or missing. Could not install program.
I don't know how to fix. Could someone please help?
Thanks,
mmspry

from a disc? try to copy the photoshop folder from the disc to the desktop, then run setup from there. however, you might have a bad drive or a bad disc. if the setup from the desktop fails, try installing on another machine. if it still fails, the disc probably has a problem. if that works, maybe your drive needs replacing.

Unable To Repair/Update Firmware for a Creative Nomad Jukebox

Hello all,
I've been trying for the past...3 or 4 hours to get my player to work, but it simply refuses to work =P. I sent the problem into Creative, but haven't gotten a response for a couple days now. So, here's a copy-paste of what I sent in that e-mail. If you can think of anything that might help, please don't hesitate to post! I really need your help on this one!
My player's hard dri've recently died, and I received
a replacement from the original store (a CompUSA).
However, my Firmware for the device has failed. I
tried the firmware upgrade for my Zen, but after
a certain number of tries, I gave up. Here is the
list of steps that I followed.
On Zen: Click "Reload OS", let it run, it says
run the firmware upgrader now.
On Computer: "You cannot install this firmware
update with your player's current drivers using
the SB394 connector. To update your player's
firmware, this application will temporarily
replace the current drivers and restore them after
the installation is complete. Continue
installation?", I click Yes. Then it says to
disconnect, and re-connect. I do it.
It shows my version (.2.0), and I'm upgrading/
repairing it to .2.02. When I click "Upgrade", a
warning message pops up and says:
"Your player cannot start up properly. Please
reboot your player and run this application again.
I've done this at least 0 times, and nothing changes. My player is a Nomad Jukebox Zen, the one with a FireWire connection, and like I said,
I've tried this at least 0 times with the same results. Is there a process to completely remove
the firmware on the device, then reinstall it,
or to roll it back or something? Any other ideas
to fix this problem is needed as well.

Bump.

CTE CT-e não autorizado. Código de status 239, motivo: Rejeição: Cabeçalho - Versão do arquivo XML não suportado

Boa tarde a todos,
Já configuramos os cenários do CT-e para a versão 2.00, mas temos algumas notas com o seguinte erro:
CT-e não autorizado. Código de status 239, motivo: Rejeição: Cabeçalho - Versão do arquivo XML não su
mesmo reiniciando o processo, o status se mantem com o 239,
alguém teria alguma solução para processar estes CT-e novamente?
desde ja agradeço.
Alexandre.

Alexandre,
Estou com o mesmo problema, o erro corre na validação do CTe de entrada quando ele foi emitido na versão 1.04.
Realizei um teste passando a chave do CTe alterando o parametro versão para 2.0 e a consulta retornou com sucesso. Estou pensando em fazer um mapping forçando a versão para 2.0.

Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001 - SCCM 2012 R2 Client Deployment

Hi All,
I installed SCCM 2012 R2 one primary site from one of our customer & using SQL 2012 SP1 DB at the back-end.
Facing Issues while deploying agent from one of our client machine - OS - window 7 Professional Sp1:
==========[ ccmsetup started in process 3828 ]==========
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Running on platform X86 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Updated security on object C:\Windows\ccmsetup\cache\.
ccmsetup 25-02-2014 02:20:37 PM
284 (0x011C)
Launch from folder C:\Windows\ccmsetup\ ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
CcmSetup version: 5.0.7958.1000 ccmsetup
25-02-2014 02:20:37 PM 284 (0x011C)
Successfully started the ccmsetup service ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
In ServiceMain ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
332 (0x014C)
CcmSetup is exiting with return code 0 ccmsetup
25-02-2014 02:20:37 PM 332 (0x014C)
Running on 'Microsoft Windows 7 Professional ' (6.1.7601). Service Pack (1.0). SuiteMask = 272. Product Type = 18
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Ccmsetup command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line parameters for ccmsetup have been specified. No registry lookup for command line parameters is required.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Command line: "C:\Windows\ccmsetup\ccmsetup.exe" /runservice "/config:C:\Windows\ccmsetup\MobileClientUnicode.tcf" "/RetryWinTask:1"
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
SslState value: 224 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPPORT: 80 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSPORT: 443 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSSTATE: 480 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMHTTPSCERTNAME: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
FSP: SCCM.MYDOMAIN.COM ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
CCMCERTISSUERS: CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
CCMFIRSTCERT: 1 ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Config file: C:\Windows\ccmsetup\MobileClientUnicode.tcf
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Retry time: 10 minute(s)
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI log file: C:\Windows\ccmsetup\Logs\client.msi.log
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MSI properties: INSTALL="ALL" SMSSITECODE="PRI" CCMHTTPPORT="80" CCMHTTPSPORT="443" CCMHTTPSSTATE="480" FSP="SCCM.MYDOMAIN.COM" CCMCERTISSUERS="CN=MYDOMAIN-CA-CA; DC=MYDOMAIN; DC=COM"
CCMFIRSTCERT="1" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Source List: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCM.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
\\SCCMDMZ.MYDOMAIN.COM\SMSClient
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
MPs: ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
SCCM.MYDOMAIN.COM
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
No version of the client is currently detected.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Folder 'Microsoft\Configuration Manager' not found. Task does not exist.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Attempting #1 retry. Max 5 retries. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Updated security on object C:\Windows\ccmsetup\.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='100'.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment '
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:37 PM 1480 (0x05C8)
Running as user "SYSTEM" ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
Detected 69650 MB free disk space on system drive.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Checking Write Filter Status. ccmsetup
25-02-2014 02:20:37 PM 1480 (0x05C8)
This is not a supported write filter device. We are not in a write filter maintenance mode.
ccmsetup 25-02-2014 02:20:37 PM
1480 (0x05C8)
Performing AD query: '(&(ObjectCategory=mSSMSManagementPoint)(mSSMSDefaultMP=TRUE)(mSSMSSiteCode=PRI))'
ccmsetup 25-02-2014 02:20:38 PM
1480 (0x05C8)
OperationalXml '<ClientOperationalSettings><Version>5.00.7958.1000</Version><SecurityConfiguration><SecurityModeMask>0</SecurityModeMask><SecurityModeMaskEx>448</SecurityModeMaskEx><HTTPPort>80</HTTPPort><HTTPSPort>443</HTTPSPort><CertificateStoreName></CertificateStoreName><CertificateIssuers>CN=MYDOMAIN-CA-CA;
DC=MYDOMAIN; DC=COM</CertificateIssuers><CertificateSelectionCriteria></CertificateSelectionCriteria><CertificateSelectFirstFlag>1</CertificateSelectFirstFlag><SiteSigningCert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iteSigningCert></SecurityConfiguration><RootSiteCode>PRI</RootSiteCode><CCM>
<CommandLine>SMSSITECODE=PRI</CommandLine> </CCM><FSP> <FSPServer>SCCM.MYDOMAIN.COM</FSPServer> </FSP><Capabilities SchemaVersion ="1.0"><Property Name="SSLState" Value="0" /></Capabilities><Domain
Value="MYDOMAIN.COM" /><Forest Value="MYDOMAIN.COM" /></ClientOperationalSettings>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Unable to open Registry key Software\Microsoft\CCM. Return Code [80070002]. Client HTTPS state is Unknown.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
The MP name retrieved is 'SCCM.MYDOMAIN.COM' with version '7958' and capabilities '<Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
MP 'SCCM.MYDOMAIN.COM' is compatible ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Retrieved 1 MP records from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Retrived site version '5.00.7958.1000' from AD for site 'PRI'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
SiteCode: PRI ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
SiteVersion: 5.00.7958.1000
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Ccmsetup is being restarted due to an administrative action. Installation files will be reset and downloaded again.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Only one MP SCCM.MYDOMAIN.COM is specified. Use it.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Searching for DP locations from MP(s)... ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD site of machine is Default-First-Site
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Local Machine is joined to an AD domain LocationServices
25-02-2014 02:20:39 PM 1480 (0x05C8)
Current AD forest name is MYDOMAIN.COM, domain name is MYDOMAIN.COM
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
DhcpGetOriginalSubnetMask entry point is supported.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Begin checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Finished checking Alternate Network Configuration
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {95A6D3CE-4F28-4E55-A29A-FF3F1A317C61} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Adapter {6024AB68-EB5E-4370-BD9E-8B2CEFE261A8} is DHCP enabled. Checking quarantine status.
LocationServices 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending message body '<ContentLocationRequest SchemaVersion="1.00">
<AssignedSite SiteCode="PRI"/>
<ClientPackage/>
<ClientLocationInfo LocationType="SMSPACKAGE" DistributeOnDemand="0" UseProtected="0" AllowCaching="0" BranchDPFlags="0" AllowHTTP="1" AllowSMB="0" AllowMulticast="0"
UseInternetDP="0">
<ADSite Name="Default-First-Site"/>
<Forest Name="MYDOMAIN.COM"/>
<Domain Name="MYDOMAIN.COM"/>
<IPAddresses>
<IPAddress SubnetAddress="10.0.0.0" Address="10.10.10.192"/>
</IPAddresses>
</ClientLocationInfo>
</ContentLocationRequest>
' ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
Sending message header '<Msg SchemaVersion="1.1"><ID>{F6331322-941A-4E44-974F-A755B1B016A4}</ID><SourceHost>POOJASETHI</SourceHost><TargetAddress>mp:[http]MP_LocationManager</TargetAddress><ReplyTo>direct:POOJASETHI:LS_ReplyLocations</ReplyTo><Priority>3</Priority><Timeout>600</Timeout><ReqVersion>5931</ReqVersion><TargetHost>SCCM.MYDOMAIN.COM</TargetHost><TargetEndpoint>MP_LocationManager</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>http</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="1126"/><Hooks><Hook3 Name="zlib-compress"/></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CCM_POST 'HTTP://SCCM.MYDOMAIN.COM/ccm_system/request'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Content boundary is '--aAbBcCdDv1234567890VxXyYzZ'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received header '<Msg SchemaVersion="1.1">
<ID>{14ADB6F1-95C1-4EEF-B8BA-16CD020ACFCF}</ID>
<SourceID>GUID:526CE573-6351-407E-AC2A-2C3927979AD9</SourceID>
<SourceHost>SCCM</SourceHost>
<TargetAddress>direct:POOJASETHI:LS_ReplyLocations</TargetAddress>
<ReplyTo>MP_LocationManager</ReplyTo>
<CorrelationID>{00000000-0000-0000-0000-000000000000}</CorrelationID>
<Priority>3</Priority>
<Timeout>600</Timeout>
<Capabilities><Property Name="SSL" Version="1"/></Capabilities><ReplyCapabilities><AllowRegistrationReset>direct:SCCM:ClientRegistration</AllowRegistrationReset></ReplyCapabilities><TargetHost>POOJASETHI</TargetHost><TargetEndpoint>LS_ReplyLocations</TargetEndpoint><ReplyMode>Sync</ReplyMode><Protocol>https</Protocol><SentTime>2014-02-25T08:50:39Z</SentTime><Body
Type="ByteRange" Offset="0" Length="3494"/><Hooks><Hook3 Name="zlib-compress"/><Hook Name="authenticate"><Property Name="Signature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roperty><Property
Name="AuthSenderMachine">SCCM;SCCM.MYDOMAIN.COM;</Property><Property Name="MPSiteCode">PRI</Property></Hook></Hooks><Payload Type="inline"/></Msg>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Received reply body '<ContentLocationReply SchemaVersion="1.00"><ContentInfo PackageFlags="16777216"><ContentHashValues/></ContentInfo><Sites><Site><MPSite SiteCode="PRI" MasterSiteCode="PRI"
SiteLocality="LOCAL" IISPreferedPort="80" IISSSLPreferedPort="443"/><LocationRecords><LocationRecord><URL Name="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCM.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite
Name="Default-First-Site"/><IPSubnets><IPSubnet Address="10.0.0.0"/><IPSubnet Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCM.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows Trust="1"/><Locality>LOCAL</Locality></LocationRecord><LocationRecord><URL
Name="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003" Signature="http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSSIG$/PRI00003"/><ADSite Name="Default-First-Site"/><IPSubnets><IPSubnet Address="172.16.10.0"/><IPSubnet
Address=""/></IPSubnets><Metric Value=""/><Version>7958</Version><Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities><ServerRemoteName>SCCMDMZ.MYDOMAIN.COM</ServerRemoteName><DPType>SERVER</DPType><Windows
Trust="1"/><Locality>FALLBACK</Locality></LocationRecord></LocationRecords></Site></Sites><ClientPackage FullPackageID="PRI00003" FullPackageVersion="1" FullPackageHash="BFC11E099E8F451107B43E0DBEFD93B01DB2D6453DA74F8A2CB94B73D676C1CD"
MinimumClientVersion="5.00.7958.1000" RandomizeMaxDays="7" ProgramEnabled="false" LastModifiedTime="30354761;897103744" SiteVersionMatch="true" SiteVersion="5.00.7958.1000" EnablePeerCache="true"/><RelatedContentIDs/></ContentLocationReply>'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found local location 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Found remote location 'http://SCCMDMZ.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Discovered 1 local DP locations. ccmsetup
25-02-2014 02:20:39 PM 1480 (0x05C8)
PROPFIND 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Using DP location http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'http://SCCM.MYDOMAIN.COM/SMS_DP_SMSPKG$/PRI00003/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Sending Fallback Status Point message to 'SCCM.MYDOMAIN.COM', STATEID='316'.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to get client version for sending messages to FSP. Error 0x8004100e
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Params to send FSP message '5.0.7958.1000 Deployment Error 0x80004005. Pre-req file name: C:\Windows\ccmsetup\ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Request failed: 500 Internal Server Error
FSPStateMessage
25-02-2014 02:20:39 PM
1480 (0x05C8)
Failed to extract manifest cab file with error 0x80004005. Try next location.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Enumerated all 1 local DP locations but none of them is good. Fallback to MP.
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
GET 'HTTP://SCCM.MYDOMAIN.COM/CCM_Client/ccmsetup.cab'
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
Couldn't verify 'C:\Windows\ccmsetup\ccmsetup.cab' authenticode signature. Return code 0x80096001
ccmsetup 25-02-2014 02:20:39 PM
1480 (0x05C8)
CcmSetup failed with error code 0x80004005
ccmsetup 25-02-2014 02:20:39 PM
284 (0x011C)
Please let me know any solution or workaround for this
Thanks Rahul$

Hi,
The client cannot verify the signature of ccmsetup.cab. I suggest you check the Trusted Root Certification Authorities in certificate store on the client to see whether a certificate is missing.
Try to enable verbose logging for SCCM client installation. Then check the log to see whether there are some useful information.(http://technet.microsoft.com/en-us/library/gg699356.aspx)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Remote for Nomad II MG compatibile w/ Zen Tou

I was looking around for the FM wired remote to accompany my Zen Touch 40 GB, and saw the remote entitled "Nomad II MG remote". The connector for this particular nomad remote looks VERY similar to the connection required for the Zen Touch remote also... Are they compatible? If not officially supported as cross product - will it still provide most of, if not all, the functionality to run the Zen Touch, or is?the connection COMPLETELY different??Thanks,?Justin L

They are different connections, I'm afraid.
Cat

Communication Problem with Nomad Explo

Hi All!
I have a pretty great Problem with my Creative Zen Touch I bought just one month ago:
When I connect it to the Computer to store or read File Data, the connection slows down to a minimum and when I try to drop something or just open a folder, the Nomad Explorer does not react anymore. So I'm not able now to retrieve my important backu
ps.
I guess it could be a worse and non-readable storaged file that cause the problem, because a few weeks ago there were no problems. But I don't know how to find and clear this problem file, if there is one. Another friend guessed it the built-in HDD could me fragmented, but I don't think I have coused such data traffic in one month. So my Question is: Can I format or defrag the HDD? Or maybe there is an alternati've Explorer so I don't have to use the Nomad Explorer? Or has the Nomad a kind of "Debug Modus" to ignore or delete wrong files? I would be gradeful for any help, thanks, Alexander (7, Germany)
Technical Spec. of the Computers I tried to connect to:
AMD Athlon XP 00Mhz
256MB RAM
Windows 2000 Professional
USB 2.0
(worked for a while, about two weeks. then the problem appears!)
AMD Athlon64 3200+
024 MB RAM
Windows XP Professional and Windows XP 64-Bit Edition
USB 2.0
Intel Celeron 200MHz (Laptop)
28 MB RAM
Windows 2000 Professional
USB .
Intel Pentium 4 3200Mhz
024 MB RAM
Windows XP Professional
USB 2.0
The Creative Zen Touch was already on the newest Firmware when I byed it. On all computers was used the Creative Nomad Explorer, installed from the CD or downloaded from Internet (Creative.com Support).

Hum.. Yep, thanks. Yesterday I read the post about how to access the rescue mode. checking and clearing up the HDD doesn't work, but after formatting it seems to work normally again, after losing all the backups I had... After all, I'm glad I don't have to send back the Zen to Creative. And thanx they set such a nice recovery mode into the ground system of the player =)
Thanks for Help. Now Admins can clear my Account, I wo'nt use it anymore

How to install MSFT application security updates in cab file format using DISM

Hi,
I tried to install security updates for MS Office which are cab files like any other windows security updates cab file. It is giving an error called "file not found". But other windows security updates cab files are installing fine without any error.
I tried to install these updates manually using DISM on commandline. It is not installing. I even tried using pkgmgr.exe, but that is not working either. I looked at DISM logs which is saying it failed opening the cab file. I tried different other commandline
options of DISM to install this, but nothing else is suitable for a cab file install.
Does anyone know how to install a cab file for application security updates via DISM.exe or other MSFT commandline tools?
Thanks,
ANSA
DISM log:
=======
2015-02-25 14:42:59, Info                  DISM   PID=4916 Scratch directory set to 'C:\Windows\TEMP\'. - CDISMManager::put_ScratchDir
2015-02-25 14:42:59, Info                  DISM   PID=4916 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Failed to get and initialize the PE Provider. Continuing by assuming that
it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
2015-02-25 14:42:59, Info                  DISM   DISM.EXE:
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Executing command line: "C:\Windows\System32\Dism.exe" /online /add-package /packagepath:"C:\ProgramData\Application
Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" /ignorecheck /norestart
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Getting Provider FolderManager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=4916 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Successfully loaded the ImageSession at "C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B"
- CDISMManager::LoadImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\OSProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\LogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Warning               DISM   DISM Provider Store: PID=11836 Failed to Load the provider: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\PEProvider.dll.
- CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Failed to get and initialize the PE Provider. Continuing by assuming that
it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Manager: PID=4916 Image session successfully loaded from the temporary location: C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B
- CDISMManager::CreateImageSession
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider OSServices - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\CbsProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 CBS is being initialized for online use. More information about CBS actions can
be located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\MsiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\IntlProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\DmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_OBJECT_PATH_NOT_FOUND
2015-02-25 14:42:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
: got STATUS_SUCCESS
2015-02-25 14:42:59, Info                  DISM   DISM OS Provider: PID=11836 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
2015-02-25 14:42:59, Info                  DISM   DISM Driver Manager: PID=11836 Further logs for driver related operations can be found in the target operating
system at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                 DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\UnattendProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\SmiProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has not previously been encountered. Attempting to initialize the
provider. - CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Loading Provider from location C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Connecting to the provider located at C:\Windows\TEMP\7D6E845E-B72B-4EAC-B1F4-E853B46FBB3B\TransmogProvider.dll.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Encountered a servicing provider, performing additional servicing initializations.
- CDISMProviderStore::Internal_LoadProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
2015-02-25 14:42:59, Info                  DISM   DISM Transmog Provider: PID=11836 Current image session is [ONLINE] - CTransmogManager::GetMode
2015-02-25 14:42:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Provider has previously been initialized. Returning the existing instance.
- CDISMProviderStore::Internal_GetProvider
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Encountered the option "packagepath" with value "C:\ProgramData\Application
Data\Autonomic\ANSA Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed opening package. - CDISMPackageManager::Internal_CreatePackageByPath(hr:0x80070002)
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to get the underlying CBS package. - CDISMPackageManager::OpenPackageByPath(hr:0x80070002)
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed to open the package at location: "C:\ProgramData\Application Data\Autonomic\ANSA
Patch Manager\_Installs\mscomctlocx-x-none_8699d53bec82460b948612f4f35d2f6a0ad018f4.cab" - CPackageManagerCLIHandler::ProcessPackagePath(hr:0x80070002)
2015-02-25 14:42:59, Error                 DISM   DISM Package Manager: PID=11836 Failed while processing command add-package. - CPackageManagerCLIHandler::ExecuteCmdLine(hr:0x80070002)
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Further logs for online package and feature related operations can be found at
%WINDIR%\logs\CBS\cbs.log - CPackageManagerCLIHandler::ExecuteCmdLine
2015-02-25 14:42:59, Error                 DISM   DISM.EXE: DISM Package Manager processed the command line but failed. HRESULT=80070002
2015-02-25 14:42:59, Info                  DISM   DISM Image Session: PID=11836 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Package Manager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Package Manager: PID=11836 Finalizing CBS core. - CDISMPackageManager::Finalize
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Package Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices. Waiting to finalize it until all other providers are
unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(MsiManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: MsiManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(IntlManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: IntlManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the PE Provider. Waiting to finalize it until all other providers
are unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DriverManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DriverManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(DISM Unattend Manager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: DISM Unattend Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Found the OSServices. Waiting to finalize it until all other providers are
unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(SmiManager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: SmiManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Finalizing the servicing provider(Edition Manager) - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: Edition Manager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to OSServices. - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Disconnecting Provider: OSServices - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:42:59, Info                  DISM   DISM Provider Store: PID=11836 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:43:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
2015-02-25 14:43:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
2015-02-25 14:43:00, Info                  DISM   DISM.EXE:
2015-02-25 14:43:00, Info                  DISM   DISM Image Session: PID=4916 Disconnecting the provider store - CDISMImageSession::Final_OnDisconnect
2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Found the OSServices. Waiting to finalize it until all other providers are
unloaded. - CDISMProviderStore::Final_OnDisconnect
2015-02-25 14:43:00, Info                  DISM   DISM Provider Store: PID=4916 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider

You need to extract and install it - Refer this link
http://blogs.technet.com/b/askcore/archive/2011/02/15/how-to-use-dism-to-install-a-hotfix-from-within-windows.aspx
Regards Chen V [MCTS SharePoint 2010]

When I point to ip address/port to view cctv security I get the tab "netvideo" but a blank screen (no video). Is there an application/cab needed to view netvideo tab?

Connecting a h.264 DVR security camera system to remote viewing through my ip address/port. This works with ie but not with firefox. On ie I get a similar tab "netvideo" and a window opens showing my DVR connection, cameras, and can operate all remotely. On Firefox I just get the "netvideo" tab but a white blank screen. The application needed to show/operate my DVR is missing from firefox. How can I make the connection operate with firefox? Seen somewhere that firefox is missing a cab for this?

Sorry, Mozilla doesn't support the patent-encumbered and royalty-encumbered H.264 standard, they support the OGG/Theodora and WebM free open source standards.
Microsoft has a H.264 plugin for Firefox, but it is for Windows7 not WinXP or Win Vista. <br />
http://www.interoperabilitybridges.com/html5-extension-for-wmp-plugin
There may be other H.264 Firefox plugins out there for WinXP, so do a Google search. Or maybe contact support for that DVR security system and see if they know of or have a Firefox plugin.

NOMAD Explorer and Creative MediaSource cr

Is anybody experiencing this frustrating problem?
I recently purchased a Creative Nomad Zen Xtra and installed the included software (drivers, Creative MediaSource and Nomad Explorer) on a Toshiba M200 notebook. My Creative MediaSource version is 2.02.06. I'm running Windows XP Pro SP.
When I plug in my Nomad, Windows detects the device just fine.
When I run MediaSource, everything looks good. I can see PC Music Library, My Computer and NOMAD Jukebox Zen Xtra in the left Sources pane. When I click on the NOMAD icon in sources, then on Music Library, all the music on my Nomad shows up in the right pane.
By the way, so far I've been using Windows Media Player to transfer my music files to the Nomad, no problem. The reason I started using MediaSource is that I want to create playlists for my Nomad, and I can't seem to find a way to create or transfer playlists themselves using Windows MP.
Here's the problem. Whenever I click (left or right mouse button--it doesn't matter) on one of the music files shown on my Nomad, MediaSource crashes. If I run Nomad Explorer, the same thing happens when I click on a music file located in the right pane (file is located on the Nomad), except here Windows Explorer crashes, of course.
I tried upgrading my Creative software to get the latest version of everything, but the same crash keeps occuring. I've tried uninstalling, reinstalling, etc, but nothing seems to work. In total frustration, I installed the Creative Software on a different Toshiba notebook (also running Windows XP Pro SP). On that machine, the old version of the software (from my CD) works just fine! However, I really can't use that system for my music.
Does anyone have any idea as to what might be causing this crash? This consistent bug is preventing me from doing anything useful with music files on my Nomad using the Creative Software.
Thanks,
Joe

Thanks for the information.
Yes, I did try upgrading ALL of the Creative software on my notebook, including the driver. That did not solve the crash problem. At that point, I tried uninstalling all Creative Software, rolled back my system to the state before I installed any Creative software (using WinXP System Restore), and reinstalled the original Creative software. The problem remains. I guess I could try rolling the system state back again, but then install only the latest version of the software. I don't know. At this point I am flailing and I am thinking there is no way to make this stuff work on my computer.
An alternati've route is this: Is there any other software I can use to create/manage playlists on my Nomad? If Windows Media Player 0 can do it, I would be thrilled. It seems pretty solid, as far as I can tell.
Joe

Nomad Jukebox Zen Xtra 60 GB can't be found through Mediasource Organizer

I have been using the Creative Nomad Jukebox Zen Xtra HDD Player since a few years and I have always been satisfied. But recently, I had a massi've computer problem, forcing me to do a complete re-install of Windows XP, without the chance to backup my old XP.
So of course I also needed to reinstall the Nomad Player. However, since I can't find the CD-Rom with the driver, I had to download (almost) everything.
At first I installed the drivers of the player and then I installed the Nomad Explorer (I still had that one on an old HDD). When I start the Nomad Explorer, the player connects and I can see the music that is stored on the player.
However, in the past I never used the Nomad Explorer, I always used Media Source Organizer. I think in the past I had Version 3 and later I updated it to Version 5. So now I went for Version instantly. I downloaded it and installed it. But here it starts to get strange. I closed the Nomad Explorer and disconnected the player, then I installed the Organizer. During the installation, I was told that the organizer can't find any supported devices, I should connect and start the player and try again. So I did. This time, the installation finished itself - but when I startet Media Organizer, it couldn't find my player.
I once read something like that you need at least Windows Media Player 0 or . Since I had 9, I installed 0, but that didn't change a thing.
So, does anyone have an idea what I am doing wrong ? Or maybe I forgot to install some normal Windows stuff, that is required by Media Organizer ? For example, I haven't installed DirectX yet (but I tell you that just as an example, I don't think that it's DirectX related)

You need the Creative Nomad Jukebox? plug-in 5.00.22 for Creative MediaSource5 found here.http://support.creative.com/Products...me=MP3+Players

Creative Nomad Jukebox Zen Xtra Wont appear in the creative mediasource organiz

I plug it into the usb dri've, and it doesnt show up. I look on My Computer, and it shows up as an audio device, and other. I go to my mediasource organizer, and it doesnt show up. I can access it on my computer, but it takes longer and I have no way of organizing my songs. I tried to re-install it, but it still doesnt work. It also doesn't work on my brothers 60gb one. Any help?

hol3_c4t,
Did you install the Nomad Jukebox Type 2 plugin also? If not, go to the download page and install those in order for the MediaSource application to identify the player.
Jason

Transferring tracks from Nomad Jukebox 2 to MUVO with Creative MediaSource Player/Organi

I recently installed Creative MediaSource Player/Organizer . When I transfer tracks from Nomad Jukebox 2 to my MUVO the tracks are transferrred as folders, not tracks (which the MUVO cannot play). How do I get the Nomad Explorer to transfer the MP3s as tracks and not folders? I'd appreciate your help.
P.S. I do not have this problem when I use Creative Playcenter to do a similar tranfer.
Message Edited by rrtash on <SPAN class=date_text>0-3-2006 <SPAN class=time_text>02:27 PM
Message Edited by rrtash on 0-4-2006 2:4 AM

PeeBee wrote:
Does the MuVo work with Nomad Explorer? I didn't think it did.
PB
I'm pretty sure it doesn't. Perhaps there's some confusion with the MuVo Explorer, or plain Windows Explorer.

NOMAD II MG Cab

Similar Messages

Maybe you are looking for