Nomad IIc - Firmware Download PW Protect

I found a link (from Creative Tech Support) for Bios upgrade of the Nomad IIc. When I click the link, it asks for username and password? The UN and PW for this forum does not allow me access.
I have version .07, and don't see any mention of what the latest version is. I want to add a SmartMedia card for 28 to my IIc, but I want to make sure it will work. Also, I found that the latest version of MediaSource does not see my IIc - I went back a version it does see it. I figure the bios upgrade might help that too. If someone has a working DL link to the upgrade I'd appreciate it.
James

Similar Messages

Nomad IIc MP3 player - flash memory capac

I have an old Nomad IIc mp3 player. Does anyone know what the capacity for a flash memory card on it is? The manual says you can add upto 28 mb ( this was 5 years ago). I'd like to know if I can use a GB card in it.
thank you
trix

There was a firmware update that added support for 28MB SmartMedia:
http://www.nomadworld.com/downloads/...od=NOMAD%20IIc
Cat

I need to install application and driver for Nomad IIc but computer says I'm not connect

I tried downloading the application, driver, and plug-in for Nomad IIc. When I try to install the driver my computer says my player is not connected but my player says it is connected. Help!

Bfd96
Did you download the correct driver and appllication?
Check that you have the following files.
. Driver - Drv_nm2.exe
2. MediaSource application - CMS_PCAPP_LB_2_03_29.exe
3. Nomad Pack - CMS_N2Plugins__00_0.exe
Do not connect the player when installing the driver. You will be prompted to connect the player when the installation is near to completion.
After which, install the MediaSource application follow by the Nomad Pack.
Jason

Nomad IIc: HOW can I transfer music onto my new playe

Hi.
I'm totally new here (I also posted this message in another thread which had already been started about my model of player before I had figured out how to post a NEW thread...) <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" width=6 border=0> sorry
I got a Creative "NOMAD IIc" player and its model number is: DAP-6406. So, I think I already found somewhere that "DAP" stands for Digital Audio Player... that means it is categorized as an "MP3 Player" of sorts? (that's not really important though....)
I am not sure if there's a 'card' in it or not... but I'm suspecting that there isn't; I found the photographs of my player under the "Support" section of the creativelabs.com site, and can't seem to see a card.
What I would like to know is:
*CAN THE PLAYER STILL PLAY SONGS/FUNCTION IF THERE IS NO CARD IN IT?*
Because (my dad just gave it to me but doesn't know anything about how it works, it had a previous owner and all that..) it DOES have songs on it already! What am I going to have to do to add new songs from my computer to it's I have the connection cord, but no CD software for it.. my computer searched for a driver/software for the player when I connected it to the computer using the USB port/dri've (?) but found no software to be installed, or something along those lines...
Is there some sort of software that I can find on a website (the Creative Labs website?) somewhere that I can load onto my computer to be able to transfer songs to this player that I've got?
I know I'm a total newbie.... SORRY for this! <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" width=6 border=0> but I would like to be able to use this player to have portable music to bring with me IF AT ALL POSSIBLE (?)
I guess I'm just asking what I'm going to need to do... *don't even really know the next step (if there is one that I can take without having to aqquire a card or CD software or something like that)
THANKS VERY MUCH (anyone who could help!)
~Sara (unipsychogirl)

As per the FAQ, go to?Nomadworld.com downloads,?select the relevant player, and all the available software will be listed.

Nomad IIc and fm tu

Hi there bad newbie here who dont wanna scroll thru hours and hours of posts to find one that answers my question.. soooo im hoping someone might email me the answer...or post it in here and i will come back and check....
I have a new nomad IIc.. and as i bought it on ebay and paid very little for it .. i am very very happy with it...LOL... but.. i find there is spose to be a fm tuner on this lil thing and am not able to find it..
i got the lil thing without the book so have no way to refrence .... but .. here is the same nomad on ebay.. if you go to ebay and just put in this number in the search bar it will pull up the auction.....
please someone .. tell me about the fm tuner...how do i find it on this nomad? auction number.....5789007945
please feel free to email me with answers at [email][email protected]][email protected][/url].. or post a answer here.. thank you... sassyblondeinwa!

creative no longer supports or sells or manufactures smart media cards for the nomad
I dun remember creative manufacturing this type of card.... hmmm...... you can use any brand of smart media as long it's within the capacity range supported by the player. I remember it's somewhere around 64MB or 32MB and not any thing higher than that.

Nomad IIc & Vi

Hello,
My apologies if there is another thread about this--I did search and was unable to turn up anything.
I am trying to connect my Nomad IIc to my new Windows Vista machine--HP Pavilion laptop. Basically, I can't get the driver or MediaSource software to install or the player to connect to the laptop.
I understand this is an old mp3 player and may not play nice with this new OS, but any help would be appreciated. I love my old Nomad IIc and it's served me well, I'd like to keep using it.
When I tried to install the latest version of the driver, it crashed. Windows said the solution was to find and install CTDrvins.exe. (I have no idea what that is, but a google search said it was something to do with a camera? I don't want to mess around with my system too much if I don't have to.) I tried to install MediaSource anyway, just to check if I could, and it predictably couldn't find the device and therefore would not install. And I've tried it on all 3 USB ports, just in case.
So MediaSource can't properly install because it can't connect, and the driver doesn't work at all, it simply crashes.
Per another thread in this forum, I tried to install Drv_nm2.exe (driver) first (that's what crashes), then CMS_PCAPP_LB_2_03_29.exe (MediaSource) and because of the problems there I never made it to step 3 CMS_N2Plugins__00_0.exe (nomad pack).
And further to the puzzle, Windows seems to think the driver installed despite the installer crashes, because it shows up in the control panel/programs. When I try to uninstall via that, the uninstaller crashes too! Yet, in the background, the uninstaller merrily does its job and removes the driver from the control panel/programs.
I downloaded all the files above off the Creative web site because when I tried to use the original Nomad IIc CDROM it said the disc only supported previous versions of Windows OS.
I can give the specs on the PC if that's helpful. Thanks in advance to anyone who can offer help.

Hi, thank you for your reply & sorry it took long to get back, I didn't get a notification that the thread had a reply.
When you say install in WinXP compatible, do you mean when I actually run the installer, run the installer in compatibility mode? Or something else? Sorry to sound daft.

Nomad IIc upgr

I am new to the forums and I'm in need of some help. I am trying to upgrade my daughter's
Nomad IIc mp3 player to accept a 28 Smart Media card. I am using Windows XP.
I installed the upgrade drivers and went through the wizard which reported success. When
I use the Sync function in Windows Media Player it shows that there is only a 32mg card.
What am I doing wrong? Thanks for any help you can provide. Yvonne

Hankey,
The Nomad IIc does not need the firmware update in order to use 28MB Smart Media cards, so it won't be necessary to upgrade the firmware. The cards go in with the contacts facing down.
Jeremy

Nomad iic - No specific driver on site anymo

Under Portable Audio, Digital MP3 Players, I don't see the Nomad iic anymore. This may be causing my problem which is I get a blue/aqua scree over the list of songs in my Nomad iic. So If I choose a C dri've or something, I see the list. But when I pick my Nomad memory, I get the light blue/aqua background hiding my list.
I installed the Nomad II 32 mb driver and Microsoft 2000 said it found a better driver and insists on installing an USB Oem driver. Maybe I have the wrong driver, but I do not see one for the iiC, specifically.
Any idea what the hell is going on?

Testforecho
The driver for Nomad IIc is still available for download at our driver download website.
http://us.creative.com/support/downloads/
Choose Portable Audio Players - MuVo (Flash/Microdri've) listing.
Jason

.rmt file missing from firmware download

The readme file included with the firmware download zip file states to look for a .rmt file. There are only .txt files and a .bin file in the zip file. Are the instruction wrong/obsolete or should there be a .rmt file in the .zip file or is the .bin file the real firmware update file?

actually, only the .bin is what you need... even if you have the .zip file, you will need to unzip it and get the .bin (binary file) you will need for firmware upgrade... the text file only gives you information...
"a helping hand in a community makes the world a universe"

Very hard to implement a long process dll or application in TestStand such as firmware download task.

Hi All
In my daily projects there are many firmware download tasks on mass production for kinds of products sucha s phone, mp3, game box and so on. The common download is performed via USB or serial port.
Firmware download is often a long process what will take up to hundreds of seconds. The download application or dll is often provided by customer or the chipset supplier, I have ever call a download dll in TestStand, the only way is to run the dll in another threading and at the UI threading I monitor the dll's log file for status, it looks a very stupid way to do, things oftn lose control.
This time I have to automatically download firmwares to a mp3(Sigmatel chipset), Sigmatel provided an application for parallel downloading what is very unstable, the application often hangs or crash, I tried to update the application source code but Sigmatel says they will not support if I change something.
If someone use the application, he needs to press the START button, if fail, press the STOP firstly, if crash..... everything lose control. In my opinion, even if I change the application to a dll, there are still long processes, I must let TestStand wait there for the log file information? I do not think that is a good idea.
My thought is this is a usual task in manufacturing, could someone please advice me how do you handle this kind of testing in your test station? How to run a long process task in TestStand and communicatio with it and keep everything in control.
Thanks.
帖子被paulbin在04-06-2008 07:49 PM时编辑过了
*The best Chinese farmer*

Hi,
I have used a VC++ dll
Here are some snipptes
void CProcessLoaderApp:ostMessageToProcess(LPPROCESS_INFORMATION lpProcessInformation,UINT Msg, WPARAM wParam, LPARAM lParam)
FINDWINDOWHANDLESTRUCT fwhs;
fwhs.ProcessInfo = lpProcessInformation;
fwhs.hWndFound = NULL;
EnumWindows ( EnumWindowCallBack, (LPARAM)&fwhs ) ;
PostMessage ( fwhs.hWndFound, Msg, wParam, lParam );
BOOL CALLBACK CProcessLoaderApp::EnumWindowRcs5SystemTestCallBack(HWND hwnd, LPARAM lParam)
FINDWINDOWHANDLESTRUCT * pfwhs = (FINDWINDOWHANDLESTRUCT * )lParam;
DWORD ProcessId;
CString Title;
GetWindowThreadProcessId ( hwnd, &ProcessId );
// note: In order to make sure we have the MainFrame, verify that the title
// has Zero-Length. Under Windows 98, sometimes the Client Window ( which doesn't
// have a title ) is enumerated before the MainFrame
CWnd::FromHandle( hwnd )->GetWindowText(Title);
if ( ProcessId == pfwhs->ProcessInfo->dwProcessId && Title.Compare("MyApplicationName_ReplaceThatStuff") == 0)
  pfwhs->hWndFound = hwnd;
  return false;
else
  // Keep enumerating
  return true;
MainStuff:
SetCursorPos(10,23);
m_App.PostMessageToProcess(&g_pi,WM_LBUTTONDOWN,0x01,0x000A0017);
  WaitForSingleObject(Event,200);
m_App.PostMessageToProcess(&g_pi,WM_LBUTTONUP,0x00,0x000A0017);
  WaitForSingleObject(Event,200);
Greetings
juergen
=s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=

Where is the firmware downloads for WRV54G

Where is the firmware downloads for WRV54G? I am looking for 2.39.2.e

Hi Steven,
You can download the latest firmware for your WRV54G at the following link:
http://www.cisco.com/cisco/software/release.html?mdfid=282526489&softwareid=282487380&release=2.39.2e&rellifecycle=&relind=AVAILABLE&reltype=latest

My computer recognizes my player but the firmware download wont (micropho

its a zen microphoto and i erased the firmware accidentaly (Do'h) and now the firmware download says my player is not connected
p.s. zen microphoto media explorer wont recognize it ethier
Message Edited by dkajake on 09-29-2006 08:03 PM

Try this:
Go into another PC (IF POSSIBLE)
Then install the Zen software that came in your installation CD.
Plug in Zen and download new firmware.
The PC should recognize it and you will be able to get it into the player.
After that you can go back to the other PC and see if it works out (it should).
This worked for my micro a year ago.
Otherwise, contact costumer support. Good luck!!

Here is the message my Iphone 4 is stating "Error no successful firmware download after 60000 ms!! Giving up..."Itunes will not even recognize it, any ideas?

Here is the message my IPhone 4 is stating, "Error no successful firmware download after 60000 ms!! Giving up..."ITunes will not even recognize it, any ideas?

No, it has something to do with the firmware on the phone itself. The phone won't do anything. I have used redsn0w to try and put the firmware back on, no luck though. The farthest I am able to go is DFU mode. The message on the screen says, "Error no successful firmware download after 60000 ms!! Giving up..."

P1006 "Firmware Download Error" for non-administrator accounts

Hello all,
I have a problem with a HP LaserJet P1006 when printing from a user account that does not have administrator rights on a new Windows Vista 64-bit machine.
The error message reads: "Firmware Download Error. The printer was unable to communicate with your computer. Please power cycle the printer, check the connection, and try again."
On the original machine, this problem could only be fixed by unplugging and reconnecting the USB cable. On another identical machine, it still prints, but the error message still occurs.
Everything works great when logged in as administrator. Also, there is no error message for the common user when bidirectional support is disabled, but then the printing is horedously slow and ties up the system.
Anyone else see this error message or have any clues what to look for?

Hi! I don't know how it's described in english, but I will try to tell a solution that worked for me. I just changed the security definitions of Windows for this printer. I'm from Brazil and I really don't know how it's show in english version of Brazil, but I'll try to explain: First of all, you need to log in as Administrator in the domain where the printer is installed. So, go to Start -> Configurations -> Printers and Fax Devices (shown "Impressoras e aparelhos de Fax" for me) Select the printer device that is reporting the firmware download error and open it. Go to the Printer menu (Impressora) and Properties (Propriedades). Select Security in the top of window. Ok, all you have to do is modify the Permissions for the users who have this problem. Allow they all to print and manage documents. This proceedement worked for me, and I hope works fine for everyone too. See you, bye. AtÃ© mais, tchau!

Firmware download for Zen Micro is Fau

The firmware download found here:
http://ie.europe.creative.com/support/downloads/download.asp?sOSName=Windows+XP&region=3&Product_N ame=Zen+Micro&Product_ID=0795&modelnumber=&driverl ang=033&OS=0&drivertype=0&x=26&y=9
(Number )
...is a faulty file. When you download the application and open it, the language choice appears. However it won't let you choose any language, and so you cannot continue.
Anyone know what the story is here? Any remedies to this?
Thanks!Message Edited by eskimo on 03-03-200608:26 PM

Thanks for your replies!
I tried both of your suggestions but neither has worked.
I'm pretty computer-literate so I have a good idea what I'm doing but it's just not working!
Basically, when the list of languages appears on the screen, it's as
if the list is just text instead of links.
The mouse doesn't react to the word "English", or "French" in anyway whatsoever.
Any more help would be hugely appreciated!

Nomad IIc - Firmware Download PW Protect

Similar Messages

Maybe you are looking for