Nomad IIc installing a 128 mb sd c

I am trying to add a 28 mb sd card to my nomad IIc but have no clue how and where to palce it in the unit. ( no explanations in the manual either) If I slide it in it protrudes into the battery area and am not able to close it. Can anyone help me?
Thank you

you can not use a sd card. it has to be a smart media card. i have a 28mb smart media card and it works just fine.

Similar Messages

I need to install application and driver for Nomad IIc but computer says I'm not connect

I tried downloading the application, driver, and plug-in for Nomad IIc. When I try to install the driver my computer says my player is <EM>not</EM> connected but my player says it <EM>is</EM> connected. Help!

Bfd96
Did you download the correct driver and appllication?
Check that you have the following files.
. Driver - Drv_nm2.exe
2. MediaSource application - CMS_PCAPP_LB_2_03_29.exe
3. Nomad Pack - CMS_N2Plugins__00_0.exe
Do not connect the player when installing the driver. You will be prompted to connect the player when the installation is near to completion.
After which, install the MediaSource application follow by the Nomad Pack.
Jason

Nomad IIc: HOW can I transfer music onto my new playe

Hi.
I'm totally new here (I also posted this message in another thread which had already been started about my model of player before I had figured out how to post a NEW thread...) <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" width=6 border=0> sorry
I got a Creative "NOMAD IIc" player and its model number is: DAP-6406. So, I think I already found somewhere that "DAP" stands for Digital Audio Player... that means it is categorized as an "MP3 Player" of sorts? (that's not really important though....)
I am not sure if there's a 'card' in it or not... but I'm suspecting that there isn't; I found the photographs of my player under the "Support" section of the creativelabs.com site, and can't seem to see a card.
What I would like to know is:
*CAN THE PLAYER STILL PLAY SONGS/FUNCTION IF THERE IS NO CARD IN IT?*
Because (my dad just gave it to me but doesn't know anything about how it works, it had a previous owner and all that..) it DOES have songs on it already! What am I going to have to do to add new songs from my computer to it's I have the connection cord, but no CD software for it.. my computer searched for a driver/software for the player when I connected it to the computer using the USB port/dri've (?) but found no software to be installed, or something along those lines...
Is there some sort of software that I can find on a website (the Creative Labs website?) somewhere that I can load onto my computer to be able to transfer songs to this player that I've got?
I know I'm a total newbie.... SORRY for this! <IMG height=6 src="http://forums.creative.com/i/smilies/6x6_smiley-sad.gif" width=6 border=0> but I would like to be able to use this player to have portable music to bring with me IF AT ALL POSSIBLE (?)
I guess I'm just asking what I'm going to need to do... *don't even really know the next step (if there is one that I can take without having to aqquire a card or CD software or something like that)
THANKS VERY MUCH (anyone who could help!)
~Sara (unipsychogirl)

As per the FAQ, go to?Nomadworld.com downloads,?select the relevant player, and all the available software will be listed.

Nomad IIc & Vi

Hello,
My apologies if there is another thread about this--I did search and was unable to turn up anything.
I am trying to connect my Nomad IIc to my new Windows Vista machine--HP Pavilion laptop. Basically, I can't get the driver or MediaSource software to install or the player to connect to the laptop.
I understand this is an old mp3 player and may not play nice with this new OS, but any help would be appreciated. I love my old Nomad IIc and it's served me well, I'd like to keep using it.
When I tried to install the latest version of the driver, it crashed. Windows said the solution was to find and install CTDrvins.exe. (I have no idea what that is, but a google search said it was something to do with a camera? I don't want to mess around with my system too much if I don't have to.) I tried to install MediaSource anyway, just to check if I could, and it predictably couldn't find the device and therefore would not install. And I've tried it on all 3 USB ports, just in case.
So MediaSource can't properly install because it can't connect, and the driver doesn't work at all, it simply crashes.
Per another thread in this forum, I tried to install Drv_nm2.exe (driver) first (that's what crashes), then CMS_PCAPP_LB_2_03_29.exe (MediaSource) and because of the problems there I never made it to step 3 CMS_N2Plugins__00_0.exe (nomad pack).
And further to the puzzle, Windows seems to think the driver installed despite the installer crashes, because it shows up in the control panel/programs. When I try to uninstall via that, the uninstaller crashes too! Yet, in the background, the uninstaller merrily does its job and removes the driver from the control panel/programs.
I downloaded all the files above off the Creative web site because when I tried to use the original Nomad IIc CDROM it said the disc only supported previous versions of Windows OS.
I can give the specs on the PC if that's helpful. Thanks in advance to anyone who can offer help.

Hi, thank you for your reply & sorry it took long to get back, I didn't get a notification that the thread had a reply.
When you say install in WinXP compatible, do you mean when I actually run the installer, run the installer in compatibility mode? Or something else? Sorry to sound daft.

Nomad IIc upgr

I am new to the forums and I'm in need of some help. I am trying to upgrade my daughter's
Nomad IIc mp3 player to accept a 28 Smart Media card. I am using Windows XP.
I installed the upgrade drivers and went through the wizard which reported success. When
I use the Sync function in Windows Media Player it shows that there is only a 32mg card.
What am I doing wrong? Thanks for any help you can provide. Yvonne

Hankey,
The Nomad IIc does not need the firmware update in order to use 28MB Smart Media cards, so it won't be necessary to upgrade the firmware. The cards go in with the contacts facing down.
Jeremy

Nomad iic - No specific driver on site anymo

Under Portable Audio, Digital MP3 Players, I don't see the Nomad iic anymore. This may be causing my problem which is I get a blue/aqua scree over the list of songs in my Nomad iic. So If I choose a C dri've or something, I see the list. But when I pick my Nomad memory, I get the light blue/aqua background hiding my list.
I installed the Nomad II 32 mb driver and Microsoft 2000 said it found a better driver and insists on installing an USB Oem driver. Maybe I have the wrong driver, but I do not see one for the iiC, specifically.
Any idea what the hell is going on?

Testforecho
The driver for Nomad IIc is still available for download at our driver download website.
http://us.creative.com/support/downloads/
Choose Portable Audio Players - MuVo (Flash/Microdri've) listing.
Jason

Making Nomad IIc appear as a Drive on my Compu

Does anyone know if it is possible to configure the Nomad IIc in windows so it will appear as a dri've on my computer. I am looking for a way to copy songs to my MP3 player using Windows Explorer.
Thanks
Mark Thomas

It always needs drivers unfortunately. You might be able to get it to appear as a Device in Windows Explorer at best.

Nomad IIc and fm tu

Hi there bad newbie here who dont wanna scroll thru hours and hours of posts to find one that answers my question.. soooo im hoping someone might email me the answer...or post it in here and i will come back and check....
I have a new nomad IIc.. and as i bought it on ebay and paid very little for it .. i am very very happy with it...LOL... but.. i find there is spose to be a fm tuner on this lil thing and am not able to find it..
i got the lil thing without the book so have no way to refrence .... but .. here is the same nomad on ebay.. if you go to ebay and just put in this number in the search bar it will pull up the auction.....
please someone .. tell me about the fm tuner...how do i find it on this nomad? auction number.....5789007945
please feel free to email me with answers at [email][email protected]][email protected][/url].. or post a answer here.. thank you... sassyblondeinwa!

creative no longer supports or sells or manufactures smart media cards for the nomad
I dun remember creative manufacturing this type of card.... hmmm...... you can use any brand of smart media as long it's within the capacity range supported by the player. I remember it's somewhere around 64MB or 32MB and not any thing higher than that.

Nomad IIc MP3 player - flash memory capac

I have an old Nomad IIc mp3 player. Does anyone know what the capacity for a flash memory card on it is? The manual says you can add upto 28 mb ( this was 5 years ago). I'd like to know if I can use a GB card in it.
thank you
trix

There was a firmware update that added support for 28MB SmartMedia:
http://www.nomadworld.com/downloads/...od=NOMAD%20IIc
Cat

Nomad IIc - Firmware Download PW Protect

I found a link (from Creative Tech Support) for Bios upgrade of the Nomad IIc. When I click the link, it asks for username and password? The UN and PW for this forum does not allow me access.
I have version .07, and don't see any mention of what the latest version is. I want to add a SmartMedia card for 28 to my IIc, but I want to make sure it will work. Also, I found that the latest version of MediaSource does not see my IIc - I went back a version it does see it. I figure the bios upgrade might help that too. If someone has a working DL link to the upgrade I'd appreciate it.
James

Can't install Rage 128 Pro in my Powermac G5

I have a 2.3 Ghz DP (not dual core) Powermac G5 with AGP Pro slot.
I have very minimal video needs, and would love to replace the X800XT card currently installed with something with very low AC requirements so that I can reduce the heat (and resultant need for fans) in the G5. I'm using the G5 for audio only and the fan noise is killer.
I thought I'd just swap in a Rage 128 Pro (as used in my G4 Cube), but no dice.
What is the least powerful graphics card I can install?
thanks in advance

what about something like this? cheaper, and looks like it generates less heat, given the much smaller heat sink.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310184354688&ssPageName=STRK: MEWAX:IT
Would a rage pro 128 card with the 'registration tab' work in AGP Pro slots?
for example,
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120496950714&ssPageName=STRK: MEWAX:IT
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400059112053&ssPageName=STRK: MEWAX:IT
Perhaps these won't work because they are not Mac specific?
Thanks for all the help guys

Not able to communicate with My Nomad

I recently put a new hard dri've on my daughter's computer and upgraded from win98 to 2000. I have installed the driver (nomad2drivers.exe) and (Drv_nm2.exe) from Creative's website. I also installed Creative MediaSource. When I connect my daughter's Nomad IIc to the USB port it does not show up as a removable dri've in my computer nor can I see it using MediaSource, but it does show up on the device manager. And the device manager says that the driver is working properly. Why can't I see the MP3 player using my computer or Windows Explorer? I tried to install the Nomad software on my computer which is running XPpro and get the same results. Please help!!
Shay Glass
<STRIKE>Also</STRIKE> my daughter has several 28meg smart media cards that she uses with her Nomad IIc. Is there a firmware update that will allow her to use the whole 28meg insteed of 64meg?

sglass,
In order for the MediaSource to detect the player, you will also need to download and install the NOMAD Pack for Creative NOMAD II/IIc/II MG.
Jason

Nomad II (c) and New MediaSource Organizer

Hi all,
after I installed the new CMS 5 when I go my ZEN, I tried to use this?with my old Nomad IIc too, but the Player does not appear in the software. Does anyone have an idea if this is working or is the latest CMS release working with the Nomad IIc the CMS 2?
Thanks and regards
Raigam

Yes, I've installed the drivers and the installation routine of CMS 5 detects a player (otherwise it won't install). That's what confusing me: CMS 5 asks for a player during installation, I connect the Nomad IIc, it recognizes?a player and contiues to install, but after finishing and rebooting the player is not?detected in CMS 5.

Communication Problem with Nomad Explo

Hi All!
I have a pretty great Problem with my Creative Zen Touch I bought just one month ago:
When I connect it to the Computer to store or read File Data, the connection slows down to a minimum and when I try to drop something or just open a folder, the Nomad Explorer does not react anymore. So I'm not able now to retrieve my important backu
ps.
I guess it could be a worse and non-readable storaged file that cause the problem, because a few weeks ago there were no problems. But I don't know how to find and clear this problem file, if there is one. Another friend guessed it the built-in HDD could me fragmented, but I don't think I have coused such data traffic in one month. So my Question is: Can I format or defrag the HDD? Or maybe there is an alternati've Explorer so I don't have to use the Nomad Explorer? Or has the Nomad a kind of "Debug Modus" to ignore or delete wrong files? I would be gradeful for any help, thanks, Alexander (7, Germany)
Technical Spec. of the Computers I tried to connect to:
AMD Athlon XP 00Mhz
256MB RAM
Windows 2000 Professional
USB 2.0
(worked for a while, about two weeks. then the problem appears!)
AMD Athlon64 3200+
024 MB RAM
Windows XP Professional and Windows XP 64-Bit Edition
USB 2.0
Intel Celeron 200MHz (Laptop)
28 MB RAM
Windows 2000 Professional
USB .
Intel Pentium 4 3200Mhz
024 MB RAM
Windows XP Professional
USB 2.0
The Creative Zen Touch was already on the newest Firmware when I byed it. On all computers was used the Creative Nomad Explorer, installed from the CD or downloaded from Internet (Creative.com Support).

Hum.. Yep, thanks. Yesterday I read the post about how to access the rescue mode. checking and clearing up the HDD doesn't work, but after formatting it seems to work normally again, after losing all the backups I had... After all, I'm glad I don't have to send back the Zen to Creative. And thanx they set such a nice recovery mode into the ground system of the player =)
Thanks for Help. Now Admins can clear my Account, I wo'nt use it anymore

Device Drive won't install correctly after 10.5 Upgrade-HELP!!!

HELP!!! I can't connect my iphone 3gs or my ipad2 since the 10.5 upgrade. When I connect either of the devices my PC says the driver is being installed but then it fails. HELP HELP HELP HELP!!!

Hi Tom,
it's very well possible that something is wrong with the amount. I have 4 different DIMMs installed: 64, 128, 256 and 512MB. The one of 256 MB might be the problem, so I've decided to take it out and we'll see what happens.
Meanwhile, I have to explain that my G4 has to 2 HDs, the original HD w/ OS 9.2 and a second bigger one w/ OS 10.5 (which doesn't want to start up again).
With the original HD as startup disk, I can still boot in OS 9.2 and that gave me the opportunity to check on the memory. Well, what I found out is that the RAM-disk was turned OFF (for both HDs). At the same time I remember that in OS 10.3 I had a problem with time/date reset, something that always would occur after unplugging the power cable. I always assumed it was a dead battery but today I had the battery checked and it's still ok, so I figure it must be something else. Perhaps the RAM disc that is turned off? Shouldn't it be on?

Nomad IIc installing a 128 mb sd c

Similar Messages

Maybe you are looking for