Nomad Jukebox 3 Driv

I cant find the Drivers for Jukebox 3 I need them.

You can get them from here.
For future reference go to Support, Downloads. Choose MP3 Players, Zen, scroll down to Archi'ved Products section, choose Jukebox 3. At next screen press Search Archi've button - this gets you to above web page.
PB

Similar Messages

  • Nomad Jukebox 20GB Driver - busted

    I have a broken Creative Labs Jukebox 20GB Model # DAPKG0 with a busted LCD screen and need to see what is on the hard dri've. What driver do I use as it list Jukebox, Jukebox 0, C, 2 and 3 but not the 20Gb. I have tried all these but can't seem to get it to work. If no driver: Anyway to erase everything without the LCD or connecting to the computer. Why weren't these designed to show up as a hard dri've? Rhetorical question, no need to answer. Thanks for your help!

    Which Jukebox is it's If original, then that's the same as the DAP Jukebox (6GB). Other 20GB players were Jukebox 3 and later Zen players.
    If it's an original Jukebox (20GB version), then check this page for drivers. You didn't mention which OS you have so you may have to go to the downloads page and select a different one (that page has XP drivers).
    Cat

  • No driver found - Nomad Jukebox Zen Xtra - WinXP

    I have used my Zen Xtra for over 2 years now, with the same PC I am currently having problems with. I recently had to do a complete reinstall of Windows (note that I have done at least 2 other complete reinstalls during the life of my Zen Xtra, with no problems). Windows Device Managers sees the NOMAD Jukebox Zen Xtra, but with the yellow question mark and exclamation point. Each attempt at driver installation results in the same problem. The driver ("JB3MV2_PCWDRV_US__30_03.EXE") installs completely, I'm told to reconnect my device so the driver can take effect. When I do, the device is still marked in Device Manager with exclamation point and yellow question mark, and Windows continues to ask if it can find and install the driver. I have told it not to (knowing that I just installed Creative's own driver), with no success, and other times let Windows try to install the driver (hoping it would find the Creative driver that was just installed). No luck. I have even done another complete reinstall of Windows, and tried to install the driver before any other program or hardware installations into my system. No luck. Note that there are no hardware changes between now and when I have done other complete Windows reinstallations. It just no longer accepts the Creative driver. I have also tried to install the driver in safe mode, with the same results. I have also completely removed the Zen Xtra (showing hidden devices in the Device Manager), and tried to reinstall. Firmware version of Zen Xtra was upgraded over a year ago to 2.0.03.
    Specifics:
    Windows XP Pro SP2
    38GB free hard dri've space
    Zen Xtra firmware version: 2.0.03

    I have the same problem. But when i try to installl it it says he is missing an .nfo file.
    I removed WMP and reinstalled WM0 because is crap.
    I have Windows XP SP2
    I have the newst firmware on it.
    Can somebody help me with this because it's annoying not to put any new music on your mp3 player.
    I never experienced this before even after formatting my HD.
    Almost the same problem as fritzm but not completely because het gets an different error.
    I have installed the CD but that doesnt work either.
    I have installed the software from the website but that didnt help because he doesnt recognize my player.
    Please help!!

  • NOMAD JukeBox Zen Xtra driver will not inst

    I plug in my NOMAD JukeBox Zen Xtra 30GB into my computer and it shows up as USB\VID_04e&PID_428 but the driver shows the ZEN Xtra as USB\VID_04e&PID_40. I changed USB\VID_04e&PID_40?to USB\VID_04e&PID_428 but it still doesn't work. It come up with error code 0?Suggestions???

    Same problem here. Also tried editing the drivers with error code 0 "device cannot be started"
    Message Edited by MaDc0w on 06-29-200708:54 AM

  • Nomad jukebox zen xtra driver for use with Vista 32 b

    Hi,
    I just registered in an attempt to find a solution to using my Nomad Jukebox Zen Xtra player with Windows Vista 32 bit operating system. Unfortunately, my old computer died and all was lost so when I purchased a new computer I naturally went with the most recent operating system, it never occured to me that my wonderful MP3 player would be considered obsolete (my various printers are all much older than my mp3 player and they all work just fine, my multiple?digital cameras too) anyway, I am running around in circles and I would not consider myself highly technical. I cannot download the latest creative firmware because without a driver my device is not recognized, and thus, creative will not complete the download since my device is not recognized...... when I go to microsoft to look for "nati've drivers" as suggested by Creative somewhere in the maze I have been stumbling through, the link I found in a search on Microsoft's website sends me to a creative labs link that...interestingly....no longer exists.... I sent an email to customer support, but they happily sent me a form letter stating that my warranty is out of date so they have no assistance to offer unless I pay for a half hour of their time in advance, and I find it odd that I should pay money to risk being told that they have chosen not to support this device, because if I pay money to hear that I will immediately hate this company, and I don't want to throw in the towel just yet, anyway, another option stated in the form letter was to use this forum, so I am trying really hard to state the circumstances of my dilemma in a fair and open way. It seems to me that with all the energy that was put into that form letter, they could have written a letter that would address this issue directly as I cannot fathome that I am the only one with this problem. So, per the suggestion of the form letter, I am here to ask if anyone knows of a solution to making a Nomad Jukebox Zen Xtra work with Windows Vista 32 bit operating system.....if there is none, then at least I will hear about it without paying Creative money to tell me so. If I should post my request to a different thread/topic area?on the forum, that information would be greatly appreciated too as I have never used a forum before and alot of the information on this site is more technical than I am used to. Thank you to anyone that can offer some guidance or a clear solution. Signed by a baffled Creative customer....Dani

    Try reading this thread. I had the same problem and the solution worked for me. http://forums.creative.com/creativel...a&message.id=7?

  • Nomad Jukebox Zen Xtra 60 GB can't be found through Mediasource Organizer

    I have been using the Creative Nomad Jukebox Zen Xtra HDD Player since a few years and I have always been satisfied. But recently, I had a massi've computer problem, forcing me to do a complete re-install of Windows XP, without the chance to backup my old XP.
    So of course I also needed to reinstall the Nomad Player. However, since I can't find the CD-Rom with the driver, I had to download (almost) everything.
    At first I installed the drivers of the player and then I installed the Nomad Explorer (I still had that one on an old HDD). When I start the Nomad Explorer, the player connects and I can see the music that is stored on the player.
    However, in the past I never used the Nomad Explorer, I always used Media Source Organizer. I think in the past I had Version 3 and later I updated it to Version 5. So now I went for Version instantly. I downloaded it and installed it. But here it starts to get strange. I closed the Nomad Explorer and disconnected the player, then I installed the Organizer. During the installation, I was told that the organizer can't find any supported devices, I should connect and start the player and try again. So I did. This time, the installation finished itself - but when I startet Media Organizer, it couldn't find my player.
    I once read something like that you need at least Windows Media Player 0 or . Since I had 9, I installed 0, but that didn't change a thing.
    So, does anyone have an idea what I am doing wrong ? Or maybe I forgot to install some normal Windows stuff, that is required by Media Organizer ? For example, I haven't installed DirectX yet (but I tell you that just as an example, I don't think that it's DirectX related)

    You need the Creative Nomad Jukebox? plug-in 5.00.22 for Creative MediaSource5 found here.http://support.creative.com/Products...me=MP3+Players

  • Nomad Jukebox Zen Xtra stops working with XP following Windows Media Player 11 Beta Installat

    Yesterday I was very pleased to find that my Creative Zen Xtra (model DAP-HD00) portable media player is a PlaysForSure capable device. Creative Labs, on November 9, 2005, released the Creative Zen Xtra PlaysForSure Firmware v2.0.03. I installed this firmware (I had to install the Creative ZenJukebox Driver v.30.03 first to get Windows to recognize the device). Once the firmware was upgraded, Windows began recognizing the Zen Xtra as a MTP device and life was good. I was able to synchronize it with both Napster To Go and Windows Media Player 0.
    After this, I went ahead and installed Windows Media Player Beta, which I just downloaded yesterday as well.
    From a functional standpoint, WMP seems to run just fine. However, when I connected the Creative Zen Xtra (with its PlaysForSure firmware), Windows redetected the hardware. It first showed "Creative Jukebox Zen Xtra" in the tooltip, followed by "MTP Device" in the new hardware tooltip. Finally, Windows announced that there was a problem installing my new hardware and that it may not work properly.
    Sure enough, when I went into Device Manager, my Zen Xtra was showing as an MTP Device with an exclamation point on it. More specifically, it specified the status of, "This device cannot start (Code 0)."
    Prior to the installation of Windows Media Player, the Creative Zen Xtra showed in device manager with the following characteristics under the heading "Windows Portable Devices":
    Name: NOMAD Jukebox Zen XtraDriver Version: 5.2.0.0 dated 8/30/2004Digitally Signed by Microsoft Windows Component Publisher
    Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.3802.3802 built by dnsrv(bld4act)
    Windows Media Player changed this to the following (the device now shows up under "Portable Devices"):
    Name: MTP DeviceDriver Version: 5.2.5326.4762 dated 2/22/2006Digitally Signed by Microsoft Windows Component Publisher
    Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.5358.4827 (WMP_.060509-2009)C:\Windows\system32\DRIVERS\wudfrd.sys - v6.0.5348.0(winmain(wmbla).0604-339)
    The file wudfrd.sys is NOT digitally signed in this case.
    As of now, my Zen Xtra is completely unusable on this system, and I need to sync it with my laptop for the time being, which still has WMP 0 installed on it.
    Is this a bug with WMP beta? Is it a problem with my firmware? Since this is PlaysForSure compliant firmware, and it worked flawlessly with Napster and WMP 0 (before the MTP driver was updated), it would seem to be a WMP beta issue. I'd like to hear more official confirmation on the subject, however.
    Some general details about my system are:
    Microsoft Windows XP Professional with Service Pack 2Verified GENUINE Microsoft operating system using Genuine Advantage ValidationIntel Pentium 4 CPU 3.2 GHz, Hyper-Threaded processor2.00 GB RAM
    Windows Media Player Version: .0.5358.4827Napster Version: 3.6.0.7 (US)
    Any recommendations? Fixes? Some have suggested rolling back the WMP installation, but I would like to consider this option only as an absolute last resort.
    Best regards,Matt

    Ok, this worked out accidentally - but happily
    I first installed the driver - not the media source - but the driver for the device.
    After that the windows device manager yellow sign disappeared - apparently the device driver was registered by windows.
    Then I Installed Mediasource 5 - the installation went thru fine.
    Does anyone have any recommended updates to install, please also advise what benefits.
    Thanks.

  • Zen Xtra Nomad Jukebox suddenly not recognized by Windows XP Netbook

    I'm desperately struggling to get my Creative Zen Xtra Nomad Jukebox MP3 player (version .03.02) to be recognized by my computer. (My background is I'm about 4 hours south of my home, temporarily helping my exwife who is slowly dyiing of cancer... [URL"http://www.youtube.com/watch?v=wA67hNO3H4"]http://www.youtube.com/watch?v=wA67hNO3H4[/url] I have two laptops with me, one with XP (and the other rarely used here with Vista.) My main computer, a Dell Desktop running XP, is back at home with most everything else as I live out of a suitcase and do the best I can.... 'nuf said for my situation)
    About 3 weeks ago, I hooked my Creative mp3 player up to my MSI netbook, (windows xp and recently updated with all microsoft updates) and noted that the MP3 player was not being recognized by the computer. When plugged into the USB, my computer gave a 'chirp' and would look for hardware for the player, but ultimately it couldn't find it. The DEVICE page of the SYSTEM menu had the Jukebox listed with the nefarious yellow question mark. Though I don't have a CD drive on this computer, I had a portable drive with most of my software with previousl loaded software archived there, including the installation disc for my MP3 player; but none of the drivers or software that I loaded would make a difference. I download all sorts of drivers & firmware updates from the CREATIVE web site, nothing changed. I would remove all the creative software, reload, reload software, hook up the MP3 player, and.... it would recognize the Nomad player but have no way to incorporate drivers for it's use. Even as I directed it to the original 'CD' copied onto my netbook's desktop, my Windows XP with service pack 3 just couldn't do more than let me know that it couldn't quite recognize the player other than identifying what it was.. I could uninstall the device, the drivers; all to no avail.
    My incorrect guess at the time was that something internal to the mp3 player was broken and though I was lucky that it still worked as a player without any issues, I just had no way to access the 30Gb of books & lectures. Nor would the Creative Media Source work with it, as it felt that the player was not even hooked up to the computer. So,I bought a new 'used' identical model on ebay, except that the seller had upgraded the firmware and the harddrive. Once I got the new player, it's too, would not be recognized by my MSI netbook. (though it works on the laptop I have running vista).
    Last week I gratefully went home for one day to check my mail and attend to a few matters, and upon hooking my original MP3 player to my main desktop, my original MP3 player immedately docked to my computer and was working as it always had?
    Now, atleast, I knew the MP3. player was working and functionally intact, and the challenge was completely computer software issues on my netbook, possibly due to some service pack upgrade or the sort.
    I've spent several hours, reviewing all sorts of fixes and maneuvers; from blogs and tech support pages, though none made any difference as I changed various settings or softwares on my netbook. I saw lots about Vista not supporting my old firmware (which isn't an issue as my Netbook is XP.. I also saw that Windows Media player might have been the problem, and reverted to WMP 9, then to 0, though stlll no change.
    I have never turned to a tech support board before, but I'm very much in need of assistance right now. Please, if you think you can guide me, I would appreciate it.
    ~Stuart

    Thanks for the reply. I sure wish I had a better understanding of this. I will request one more piece of invaluable knowledge from you! My old zen & windows xp computer hum in awesome performance again. Unfortunately, since I thought my old zen was broken, I'm now with this new beast, with the updated firmware 2.0.03. From what I previously read on Boards and Forum pages, this device shouldn't be connected to my XP computer while I'm still using my OLD zen with old firmware. As you mention in the above note, I connect this 'new' Zen to my Vista computer, & it immedately goes into docking mode. I tried loading the newest firmware available for my device (though it doesn't list vista as compatable), and of course, when the mediasource version 3.30.2 loads, it doesn't have a clue that my zen is connected. Only WMP version seems to pay attention, which may not be that bad. But once I was up & running in WMP, I couldn''t seem to create playlists and or even clearly get it to load the Audio Lectures that I have onto it. So, Wise, All Knowing CREATIVE Wizard, any suggestions what I do? Delete WMP? I will hope never to bother you again, once this is solved!!!
    But I am tremendously grateful for the assistance. I only spent about an hour in WMP accomplishing nothing, before I realized I should just turn to you, admit my defeat, and hope for insight and practical advice!!!!!
    Thanks!!!
    ~Stuart

  • Nomad Explorer not detecting Nomad Jukebox Zen Xtra after firmware upgr

    <blockquote dir="ltr">From the firmware thread: "The Creative drivers shouldn't make any difference. An MTP device is looking for the Windows Media Player 0 MTP driver (which is installed with WMP0)."[/quote]Is that why my updated Zen Xtras (40G and 60G) are no longer recognized by Nomad Explorer on Windows XP? XP sees them. MediaMonkey sees them (and can synch). (WMP0 is installed, but I haven't tried it.) Nomad Explorer (3.0.0, 22 Sep 2004) says nothing's detected. Is this because I'm still using the latest driver (2.0.00), which the Creative download site says only supports firmware below 2.00.00. (If so, interesting choice by Creative, making us downgrade the driver.)?I wouldn't care, but Nomad Explorer is the only way (I know of) to edit the devices' names and startup bitmaps. And I wouldn't even care so much about the bitmaps, but I really really want to edit the names so that I can tell them apart in MediaMonkey's list of devices. Can we still use Nomad Explorer? Which driver should I be using? Creative's download section is anything but clear:?2.0.00 (8 Oct 2006): Supports XP but the firmware must be below 2.00.00.
    .30.03 (3 Sep 2005): Supports XP but was released before firmware 2.0.03, so does it support it's?There's also a legacy OS Driver for Windows 2000 (.0.00, 27 Feb 2006) which specifically says it supports PFS players. Is this what I need? Can we no longer use Nomad Explorer on XP (even though it's listed as a download)?

    Thanks, but if the Nomad Explorer requires the suite to work, I'll just have to do without it. The Creative Suite is better than it used to be, but IMO it's still not as good as MediaMonkey. Still, Creative doesn't list the Suite as being required for Explorer to work, so I don't think that's it. From the Download page:?Requirements
    Windows XP, Windows 2000, Windows Millennium Edition or Windows 98 Second Edition<
    Creative NOMAD Jukebox 2, 3, Zen, Zen USB2.0, Zen NX, Zen Xtra or Zen Touch<
    I'll try the other driver tonight and see if that's it.
    Message Edited by skst on 0-0-200702:57 PM

  • NOMAD Jukebox Zen Xtra 30gb dri

    Hiya,
    Sorry if its been asked before, but I installed a new Windows Vista 64bit about a month ago and since then I've searched all over the net trying to find a working driver that will allow me to transfer all of my music that I've collected over the years from my NOMAD Jukebox Zen Xtra30gb to my PC.
    It worked fine with XP, but I need a 64bit driver for the USB connector.
    Does anyone know where I can download a working driver?
    Any help would be great!
    Thanks

    Does your player have the Plays For Sure Firmware http://support.creative.com/Products...me=MP3+Players If it doesn't do you still have access to a computer with XP

  • Nomad Jukebox Zen Xtra: Nomad Explorer says Not connected ... first time u

    I just bought a Nomad Jukebox Zen Xtra. I used the installation CD to install everything and Windows automatically tried to locate a driver for it but it was not successful, so I downloaded the driver for the Zen Xtra from this website and installed it.
    However, when I open "Nomad Explorer" it shows the player's logo with a red X and says "Not connected". How do I get the player to connect to the computer?
    This is my first time using a Nomad Jukebox Zen Xtra and I have limited computer knowledge, but I know all my USB ports are working.
    Any help would be appreciated.
    -John

    Hi!?I'm having the same problem. I bought the player, but after a couple of weeks I've exchanged it, because of some hardware problem. The original player worked all right, but the new one is not recognized by NOMAD Explorer ("not connected"), and?I also?can't copy files via Windows Explorer. The strange thing is I managed to copy a couple of albums, but then it'sstarted to hang the Explorer. The firmware version is 2.0.03. I reinstalled the drivers and NOMAD Explorer - didn't help. PS: You've got to help me, 'cause my iPod-loving friends laugh at me, so it's my and Creative's reputation we're talking about

  • Nomad jukebox zen xtra firrmware version 1.03

    i own a nomad jukebox zen xtra 30gb which has been running in excellent condition for three years..i want to make a database of all driver and firmware versions on my pc..
    i've tried locating this firmware version(.03.02)?everywhere(creative downloads page included)..but haven't met with success..i would appreciate if anyone would tell me where to look for it..thanks in advance

    First you must install the driver http://support.creative.com/Products...me=MP3+Players on the computer. Have a battery that is charged. What you did is you erased the firmware(reload O.S.)so the player has none. That is why you got the message you got. You are going to lose all the files(music) on the player because when you install the firmware? you are going to format the dri've before you do that.
    Download & install the driver first. The version 2.0.00 driver Then check to see if player is recognized(plug it into a rear usb port if using a desktop NO USB HUBS) Download the firmware file to your desktop on the computer
    <div class="DownloadBriefBox"><div class="DownloadNameBox">http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=28757&view=by_date_ ascending&page= <span class="DownloadSizeBox">

  • Nomad Jukebox Zen Xtra Firmware Update Issue

    My player does not get recognized after attempting to update firmware (ZenXtraP4SAudible_PCFW_LB_2_0_03.exe) according to website instructions.
    When turned on the player displays "Firmware Problem" for a fraction of a second, then it goes into Rescue Mode v., Boot v.4, HW v0.0., 4 items in the menu ( Clean Up; 2 Format All; 3 Reload OS; 4 Reboot)
    This is my setup:
    Kernel version: Microsoft Windows XP, Multiprocessor Free
    Product type: Professional
    Product version: 5.
    Service pack: 3
    Kernel build number: 2600
    IE version: 8.0000
    System root: C:\WINDOWS
    Processors: 2
    Processor speed: 2.6 GHz
    Processor type: AMD Athlon(tm) 7750 Dual-Core Processor
    Physical memory: 3072 MB
    Video driver: ATI Radeon HD 4800 Series
    Relevant Applications:
    Creative Jukebox Driver
    Creative MediaSource
    Creative NOMAD Jukebox Zen Xtra
    Windows Media Format Runtime
    Windows Media Player 0
    Please advise, thanks in advance,

    Problem solved!
    I did not follow the link you provided, thanks for the suggestion anyway. I read in another post that you advised to disable the device in Device Manager, although I took a different route. This is what I did after enabling Mediasource DETECTOR
    . Completely uninstall Windows Media Player , revert to WMP 0, inlcuding the Runtime
    2. Reboot the PC
    2. Once rebooted connect the player to the PC
    3. right click MY COMPUTER->MANAGE->DEVICE MANAGER
    4. Under Windows Portable Devices right click NOMAD JUKEBOX ZEN XTRA, then select Update Drivers
    5. Navigate to "C:\Program Files\Creative\Jukebox 3 Drivers" to select the driver, OK all the windows
    6. Run ZenXtraP4SAudible_PCFW_LB_2_0_03.exe with the player connected
    7. I was prompted if I wanted to replace the Firmware with the same version (2.0.03) I said yes... within seconds the player came back to normal.
    I hope that the above can help people in my same situation. The culprit seems to be WMP and all the hidden software installed with it. Freakin Microsoft!
    Final question. Now that the firmware has been updated, am I safe by installing WMP ?
    Thanks!

  • Nomad jukebox zen xtra - cannot create file w message when trying totransfer fi

    My 30G nomad jukebox zen xtra was working great until recently. Now when I power my player up after a day of no use, it takes 0-5 minutes to rebuild the library. When I begin to transfer files using Media source after a few transfers I get the "unable to create file" message and can no longer transfer. I have tried disk clean up and re-booting to no avail. I tried installing the new firmware and this worked for about 80 songs and then I began getting the same problems. I have completely cleaned my PC of adware and spyware and this has no effect. I love my player but am becoming a little frustrated. Would anyone have any ideas? This all started when I turned on my player one day and all of the music was gone. I re-transfereed everything back and later noticed that I had two of everything. I deleted all of the duplicates and from that point on it began to take 5 minutes to rebuild the library but I could still transfer files with no problems. One last thing, when I run disk cleanup in rescue mode, once it gets to 99% done it stalls there for about 0-5 minutes before going back to the rescue mode menu.
    scott

    i experienced the same problem. until 2 weks ago it worked fine. but a visited the support site and found out that all the software was new. so i downloaded the new versions. even the new firmware with the e at the end. i was at the edge to smash my monitor when i found out that after the firmware update the sound was hearing so quiet. after rebuil os and searching 2 hour on the net for the previous firmware release, prior to E release, i solve the sound problem.
    but another appeard. cannot copy files on the player. if i choose to delete them, they disappear. i turn off the zen nx, turn back on and the files were still there. practically all the copy/delete/new folder/paste function were blocked. and the same problem on WIN XP and win 2000. all this because i installed the new versions for nomad explorer, nomad mediacenter, nomad plugin for media center.
    solution: uninstalled all the creative software. put the original cd in the dri've. installed all the original software. it was running perfect. so, i could operate again in the data files on the player.
    so i thought it was the driver problem since the media library i could access just fine. so i kept the original driver but installed all the new software (mediasource, nomad explorer, nomad zen plugin for mediasource).
    guess what? the accesing proble appeard again. i think that the better solution is to stick to the original software.
    and one last find. after the E firmware adveture, i experince what other are and was praing not to happen to me. the battery is lasting much much short period. and the green light if you look carefully is fluctuating in intensity. this was not happening until i burn the new E firmware. .0.02e. now after the rebuild os and writng a firmware it displays .0.02 without the E. the sound is like before. 24 damages your ears but the battery problem stills persit. it driving me crazy.

  • NOMAD Jukebox Zen Xtra file recovery from working harddri

    My USB port on my NOMAD Jukebox Zen Xtra is basically non-functional. The drive works fine so i'm not trying to recover "corrupted" files, just ones that exist on the drive... Is there any way I can access the files on the hard drive directly if I remove it from my Nomad Is there any way to use a hard drive connector (from a USB case) where the board plugs into the drive and the other end connects via USB to my computer (which has my Nomad software on it's) As the USB connector on the Nomad isn't working, is there any way i can get my music off the drive
    Thanks!

    Does this happen with all tranfers or any certain audio files? Have you try reinstalling the driver or try running Cleanup in Rescue mode.
    JasonMessage Edited by Jason-CL on 09-04-2006 04:46 PM

Maybe you are looking for