Nomad Jukebox Zen - music is trapped! HE

I've got a Nomad Jukebox Zen. This was one of the first ones I believe. version .00.04 (20GB model) Anyway, this mp3 player was buried in my closet for the last few years and I've since purchased a new player. I would like to get some of the music off the old player to transfer to my computer for the new player, but my computer won't recognize it. I don't have the original software and since it's an older model, Creative ain't talking. I've tried downloading the drivers that they have available but nothing works. Any suggestions on how to get my computer to just recognize it as basically an external hard drive

What P.C operating system are you using ( ie windows Vista/XP/me/98)
http://www.nomadness.net have some old driver software etc available

Similar Messages

  • Moving music from my nomad jukebox zen xtra to my

    I am trying to move my music from my nomad jukebox zen xtra to my pc - i cant get the creative media source to recognize my player - i tried windows media player and comcast rhapsody - it recognized my player but wont let me highlight music to move to my PC
    any ideas please?
    many thanks

    [size="2" face="Helv">You must install the specific MP3 player plugin for MediaSource. Here is what you should do:
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.
    - (Depending on your product and firmware)
    For non-PlaysForSure Zen Xtra: Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
    or:
    For PlaysForSure Zen Xtra: Download and install the Creative Software Suite for PlaysForSure-enabled Creative NOMAD Jukebox Zen Xtra Players.

  • No driver found - Nomad Jukebox Zen Xtra - WinXP

    I have used my Zen Xtra for over 2 years now, with the same PC I am currently having problems with. I recently had to do a complete reinstall of Windows (note that I have done at least 2 other complete reinstalls during the life of my Zen Xtra, with no problems). Windows Device Managers sees the NOMAD Jukebox Zen Xtra, but with the yellow question mark and exclamation point. Each attempt at driver installation results in the same problem. The driver ("JB3MV2_PCWDRV_US__30_03.EXE") installs completely, I'm told to reconnect my device so the driver can take effect. When I do, the device is still marked in Device Manager with exclamation point and yellow question mark, and Windows continues to ask if it can find and install the driver. I have told it not to (knowing that I just installed Creative's own driver), with no success, and other times let Windows try to install the driver (hoping it would find the Creative driver that was just installed). No luck. I have even done another complete reinstall of Windows, and tried to install the driver before any other program or hardware installations into my system. No luck. Note that there are no hardware changes between now and when I have done other complete Windows reinstallations. It just no longer accepts the Creative driver. I have also tried to install the driver in safe mode, with the same results. I have also completely removed the Zen Xtra (showing hidden devices in the Device Manager), and tried to reinstall. Firmware version of Zen Xtra was upgraded over a year ago to 2.0.03.
    Specifics:
    Windows XP Pro SP2
    38GB free hard dri've space
    Zen Xtra firmware version: 2.0.03

    I have the same problem. But when i try to installl it it says he is missing an .nfo file.
    I removed WMP and reinstalled WM0 because is crap.
    I have Windows XP SP2
    I have the newst firmware on it.
    Can somebody help me with this because it's annoying not to put any new music on your mp3 player.
    I never experienced this before even after formatting my HD.
    Almost the same problem as fritzm but not completely because het gets an different error.
    I have installed the CD but that doesnt work either.
    I have installed the software from the website but that didnt help because he doesnt recognize my player.
    Please help!!

  • Nomad Jukebox Zen Xtra 60 GB can't be found through Mediasource Organizer

    I have been using the Creative Nomad Jukebox Zen Xtra HDD Player since a few years and I have always been satisfied. But recently, I had a massi've computer problem, forcing me to do a complete re-install of Windows XP, without the chance to backup my old XP.
    So of course I also needed to reinstall the Nomad Player. However, since I can't find the CD-Rom with the driver, I had to download (almost) everything.
    At first I installed the drivers of the player and then I installed the Nomad Explorer (I still had that one on an old HDD). When I start the Nomad Explorer, the player connects and I can see the music that is stored on the player.
    However, in the past I never used the Nomad Explorer, I always used Media Source Organizer. I think in the past I had Version 3 and later I updated it to Version 5. So now I went for Version instantly. I downloaded it and installed it. But here it starts to get strange. I closed the Nomad Explorer and disconnected the player, then I installed the Organizer. During the installation, I was told that the organizer can't find any supported devices, I should connect and start the player and try again. So I did. This time, the installation finished itself - but when I startet Media Organizer, it couldn't find my player.
    I once read something like that you need at least Windows Media Player 0 or . Since I had 9, I installed 0, but that didn't change a thing.
    So, does anyone have an idea what I am doing wrong ? Or maybe I forgot to install some normal Windows stuff, that is required by Media Organizer ? For example, I haven't installed DirectX yet (but I tell you that just as an example, I don't think that it's DirectX related)

    You need the Creative Nomad Jukebox? plug-in 5.00.22 for Creative MediaSource5 found here.http://support.creative.com/Products...me=MP3+Players

  • NOMAD Jukebox Zen Xtra 30gb dri

    Hiya,
    Sorry if its been asked before, but I installed a new Windows Vista 64bit about a month ago and since then I've searched all over the net trying to find a working driver that will allow me to transfer all of my music that I've collected over the years from my NOMAD Jukebox Zen Xtra30gb to my PC.
    It worked fine with XP, but I need a 64bit driver for the USB connector.
    Does anyone know where I can download a working driver?
    Any help would be great!
    Thanks

    Does your player have the Plays For Sure Firmware http://support.creative.com/Products...me=MP3+Players If it doesn't do you still have access to a computer with XP

  • Nomad Jukebox Zen Xtra VS Winows Media Player - Help?

    I have a 40gig Nomad Jukebox Zen Xtra - a computer crash a year ago resulted in a replacement by the computer company - and it came with Windows Media Player.... when I tried to run it and had already installed the Creative software/Music library - Media Player crashed my computer every time - had to uninstal...,. now - that computer is defecti've and has just been replaced again by the maker - and before I load the Creatai've Software wondered if this is what is interfering with Media Player? Does anyone know? When I buy music it looks for Windows Media Player I believe - and I can play it and transfer the music in Creative program - BUT - it no longer lists my music library as single songs but as folders - and I have to go specifically into a remote folder to try to find the downloaded music and transfer to the Nomad....
    Any help is appreciated..... I'm lost!
    Thanks
    KB

    The firmware update only works on a windows XP machine.
    you also need to have Windows media player 0 installed
    you must not have windows media player or windows media player runtime lurking in your windows XP add/remove programmes bit on the control panel.
    if you do have WMP first remove it ( roll back) then re-boot, then remove windows media player runtime ( rioll back) and re-boot.
    open windows media player, if it is windows media player 0 then you should be OK, if its windows media player 9 you need ot download and install windows media player 0.
    Check again to make sure that windows media player and windows media player runtime are not in the add/rmove programs.
    Back up everything on the player, all music, playlists and data files.
    update the firmware.
    if it stalls part way, like it did for me the last time i updated a Zen Xtra ( last weekend -installing a new motherboard ) dont panic.
    it will go to rescue mode, close the firmware update, the player will go to rescue mode, then re-satart the update, on the zen xtra, slect re-load OS then on the firmware update click on English. then slect re-load os on the player.
    make sure that the player is fully charged, and that the mains charger is also attached.
    just out of interest, when you remove the front panel on your zen xtra to get to the battery, does the headphone jack ( visable through a hole in the top right) have a blob of red paint on

  • Nomad jukebox zen xtra firrmware version 1.03

    i own a nomad jukebox zen xtra 30gb which has been running in excellent condition for three years..i want to make a database of all driver and firmware versions on my pc..
    i've tried locating this firmware version(.03.02)?everywhere(creative downloads page included)..but haven't met with success..i would appreciate if anyone would tell me where to look for it..thanks in advance

    First you must install the driver http://support.creative.com/Products...me=MP3+Players on the computer. Have a battery that is charged. What you did is you erased the firmware(reload O.S.)so the player has none. That is why you got the message you got. You are going to lose all the files(music) on the player because when you install the firmware? you are going to format the dri've before you do that.
    Download & install the driver first. The version 2.0.00 driver Then check to see if player is recognized(plug it into a rear usb port if using a desktop NO USB HUBS) Download the firmware file to your desktop on the computer
    <div class="DownloadBriefBox"><div class="DownloadNameBox">http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=28757&view=by_date_ ascending&page= <span class="DownloadSizeBox">

  • Nomad jukebox zen xtra - cannot create file w message when trying totransfer fi

    My 30G nomad jukebox zen xtra was working great until recently. Now when I power my player up after a day of no use, it takes 0-5 minutes to rebuild the library. When I begin to transfer files using Media source after a few transfers I get the "unable to create file" message and can no longer transfer. I have tried disk clean up and re-booting to no avail. I tried installing the new firmware and this worked for about 80 songs and then I began getting the same problems. I have completely cleaned my PC of adware and spyware and this has no effect. I love my player but am becoming a little frustrated. Would anyone have any ideas? This all started when I turned on my player one day and all of the music was gone. I re-transfereed everything back and later noticed that I had two of everything. I deleted all of the duplicates and from that point on it began to take 5 minutes to rebuild the library but I could still transfer files with no problems. One last thing, when I run disk cleanup in rescue mode, once it gets to 99% done it stalls there for about 0-5 minutes before going back to the rescue mode menu.
    scott

    i experienced the same problem. until 2 weks ago it worked fine. but a visited the support site and found out that all the software was new. so i downloaded the new versions. even the new firmware with the e at the end. i was at the edge to smash my monitor when i found out that after the firmware update the sound was hearing so quiet. after rebuil os and searching 2 hour on the net for the previous firmware release, prior to E release, i solve the sound problem.
    but another appeard. cannot copy files on the player. if i choose to delete them, they disappear. i turn off the zen nx, turn back on and the files were still there. practically all the copy/delete/new folder/paste function were blocked. and the same problem on WIN XP and win 2000. all this because i installed the new versions for nomad explorer, nomad mediacenter, nomad plugin for media center.
    solution: uninstalled all the creative software. put the original cd in the dri've. installed all the original software. it was running perfect. so, i could operate again in the data files on the player.
    so i thought it was the driver problem since the media library i could access just fine. so i kept the original driver but installed all the new software (mediasource, nomad explorer, nomad zen plugin for mediasource).
    guess what? the accesing proble appeard again. i think that the better solution is to stick to the original software.
    and one last find. after the E firmware adveture, i experince what other are and was praing not to happen to me. the battery is lasting much much short period. and the green light if you look carefully is fluctuating in intensity. this was not happening until i burn the new E firmware. .0.02e. now after the rebuild os and writng a firmware it displays .0.02 without the E. the sound is like before. 24 damages your ears but the battery problem stills persit. it driving me crazy.

  • NOMAD Jukebox Zen Xtra file recovery from working harddri

    My USB port on my NOMAD Jukebox Zen Xtra is basically non-functional. The drive works fine so i'm not trying to recover "corrupted" files, just ones that exist on the drive... Is there any way I can access the files on the hard drive directly if I remove it from my Nomad Is there any way to use a hard drive connector (from a USB case) where the board plugs into the drive and the other end connects via USB to my computer (which has my Nomad software on it's) As the USB connector on the Nomad isn't working, is there any way i can get my music off the drive
    Thanks!

    Does this happen with all tranfers or any certain audio files? Have you try reinstalling the driver or try running Cleanup in Rescue mode.
    JasonMessage Edited by Jason-CL on 09-04-2006 04:46 PM

  • Nomad Jukebox Zen Xtra 60GB not playing correctly anymore, help!!

    Thanks. I keep getting directed to that knowledge base page, but it is not addressing my problem. My computer immediately tells me that the device has "malfunctioned" and the computer does not recognize it. I only have the usb cord that came with the zen, so I don't have another one to try. I love my zen and have staunchly defended it over the years vs. an i-pod. However, this is my 2nd onI've had my Nomad Jukebox Zen Xtra 60GB for over 5+ years. It has worked great, with minimal problems. I had a firmware update issue quite a while back. I'm not sure how to resolve this problem. Here is the situation:
    Nomad Jukebox Zen Xtra 60GB is fully charged and ready to use.
    I tried loading a set playlist but it won't load. So I tried another, and it doesn't load. Not sure what to do, I go to the menu. This time I choose an artist/band. The music loads, but it doesn't play. I try again, then it starts to play. So I load a few other artists that way. It seems like I had a issue to work out later. Being away from my computer that was going to have to wait. After some time the Nomad Jukebox Zen Xtra 60GB started to start N stop diferent songs. A few times it froze while playing a song. Then would unfreeze to play another, then suddenly start playing the previous one. After about 0-5 minutes of this I decided I had enough. So I planned to empty the playlist, and turn it off. It took me atleast three attempts to empty the playlist and turn it off.
    Are these problems fixable What are they hardware or software
    Would an OS or firmware update fix these problems Is my Nomad Jukebox Zen Xtra 60GB hard dri've going Can I get a replacement Or do I need to buy a new player
    Please help me get my player working. I really like this model, I'd hate to have to replace it.
    in 5 years. (The first one fried itself, but fortunately was still under warrantly.) Sadly, I, too, am considering moving on. I onlyreceived generic help fromthe Creative SupportTeam (who ultimately told me my zen is "unrepairable" when their one-size-fits-all solutions didn't work).Since there seems to be an overwhelming # of people experiencing similar problems, maybe the time is right to make the change, especially since an iPod classic 60 GB (7th Generation) is quite affordable these days.
    [/B]

    Formatting will erase all the files on the player,Cleanup scans the disc & corrects file system errors,broken links (from when you delete things)ect. but does NOT repair bad sectors,Reboot then rebuilds the file system. I'd do the Cleanup>Reboot first to see if that solves the problem.here you will find how to open the player to see what dri've is in there. You can then search Ebay or Google the model number to find another one.

  • Nomad jukebox zen replacement screen???

    hi folks i am in extreme need of help and advice.
    I recently bought a 60 gb nomad jukebox zen second hand from ebay. As it was second hand I have no warranty. After around a week I somehow cracked the screen? There is now no display whatsoever. I can still listen to music for now but I have no display - the blue light comes on but no black text? As I have no warranty I cannot email creative to ask what I can do about it's I asked at a local electrical shop and they said that I should contact creative and they'll help me. Can I buy a replacement screen? can I send the unit to creative and they'll fit a new screen? I am situated in Aberdeen so I'll have to go through creative in the united kingdom?
    I really don't know what to do so would really appreciate it if someone could point me in the right direction?
    cheers

    Creative will still repair the player, but it's likely to be expensi've. You can't buy the screen as a spare though, you'd have to cannibalise it from another player.

  • Problems with Nomad Jukebox Zen and Mediasource - Please he

    Hi,
    I own a Nomad Jukebox Zen NX, and I'm having problems with Creative Mediasource seeing the device. Everything has been working fine for a while; I have been able to upload songs from my Zen to my PC and download songs from my PC to my Zen. However, when I tried plugging in my Zen today, the computer did the normal "boop-beep" signaling that the device had been plugged in. However, when I went into Creative Mediasource to download some songs to my Zen, the Zen did not come up under the "Sources" menu, on the upper left, where it usually does.
    I exited Mediasource went into "My Computer" on my desktop and, sure enough, the Zen was there under "Audio Devices," and when I double clicked on the icon, it brought showed all of the music files I have on my Zen. This shows that my computer does indeed see the Zen, but Mediasource doesn't?
    Any ideas?
    All help is very much appreciated,
    Jason

    Your MediaSource plugin of the MP3 player may have been uninstalled. Here is what you should do:
    <FONT face=Helv size=2>
    - Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site.
    - Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.9 for Creative MediaSource from your product download site.

  • Nomad Jukebox Zen ... PlaysforSu

    Is the Nomad Jukebox Zen compatible with music subscription services (such as Yahoo, etc.)? Is it a PlaysforSure device?
    Please forgive me for asking such an obvious question ... I have searched everywhere and can't find an answer ... which probably means the answer is no.

    The earlier Zens, no.
    Currently only the Zen Micro is compatible. The Zen Xtra and Touch should be with a future firmware update. Creative haven't announced this for any other players.

  • Windows 7 Support Nomad Jukebox Zen Xtra

    I have a Nomad Jukebox Zen Xtra MP3 player. The hard dri've crashed on my old computer ( which used the wiindows XP operating system). I bought a laptop which uses Windows 7. I don't seem to be able to find a way to access the MP3 player with the windows 7 computer. I don't need?a lot of functionality. I would be happy to put tags on MP3 files with some other software, if only there was a way to get this laptop to talk to the MP3 player. Any suggestions?
    Thanks,
    Ed

    If you can find a PC running Windows XP with Windows Media Player 0 installed you can install the?Creative Zen Xtra PlaysForSure Firmware 2.0.03 - this will turn the player into an MTP device so you will not need to install any special drivers/software to copy music or other files to it (as long as the computer has Windows Media Player 0 or later installed - so Vista or 7 will be fine, as will up-to-date versions of XP).
    I could not get the firmware installer to work with Windows Media Player installed on XP (it claims the player is not plugged in) but Windows Media Player 0 works reliably. As Windows Vista comes with WMP and Windows 7 with WMP 2 you'll need to find an XP machine to install the firmware, though once installed you can use the player with any modern OS.
    As I run Vista on my PC I had to resort to installing XP in VirtualBox to run the firmware installer but I would strongly recommend trying to find a real PC before resorting to emulators!
    Edit: If possible, back up your files before updating the firmware - if I remember correctly updating to the PlaysForSure firmware does delete all of your existing files, but even if I haven't remembered correctly it's worth doing just in case..!

  • Nomad Jukebox Zen Xtra stops working with XP following Windows Media Player 11 Beta Installat

    Yesterday I was very pleased to find that my Creative Zen Xtra (model DAP-HD00) portable media player is a PlaysForSure capable device. Creative Labs, on November 9, 2005, released the Creative Zen Xtra PlaysForSure Firmware v2.0.03. I installed this firmware (I had to install the Creative ZenJukebox Driver v.30.03 first to get Windows to recognize the device). Once the firmware was upgraded, Windows began recognizing the Zen Xtra as a MTP device and life was good. I was able to synchronize it with both Napster To Go and Windows Media Player 0.
    After this, I went ahead and installed Windows Media Player Beta, which I just downloaded yesterday as well.
    From a functional standpoint, WMP seems to run just fine. However, when I connected the Creative Zen Xtra (with its PlaysForSure firmware), Windows redetected the hardware. It first showed "Creative Jukebox Zen Xtra" in the tooltip, followed by "MTP Device" in the new hardware tooltip. Finally, Windows announced that there was a problem installing my new hardware and that it may not work properly.
    Sure enough, when I went into Device Manager, my Zen Xtra was showing as an MTP Device with an exclamation point on it. More specifically, it specified the status of, "This device cannot start (Code 0)."
    Prior to the installation of Windows Media Player, the Creative Zen Xtra showed in device manager with the following characteristics under the heading "Windows Portable Devices":
    Name: NOMAD Jukebox Zen XtraDriver Version: 5.2.0.0 dated 8/30/2004Digitally Signed by Microsoft Windows Component Publisher
    Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.3802.3802 built by dnsrv(bld4act)
    Windows Media Player changed this to the following (the device now shows up under "Portable Devices"):
    Name: MTP DeviceDriver Version: 5.2.5326.4762 dated 2/22/2006Digitally Signed by Microsoft Windows Component Publisher
    Driver File Details:C:\Windows\system32\wpdusb.sys - v5.2.5358.4827 (WMP_.060509-2009)C:\Windows\system32\DRIVERS\wudfrd.sys - v6.0.5348.0(winmain(wmbla).0604-339)
    The file wudfrd.sys is NOT digitally signed in this case.
    As of now, my Zen Xtra is completely unusable on this system, and I need to sync it with my laptop for the time being, which still has WMP 0 installed on it.
    Is this a bug with WMP beta? Is it a problem with my firmware? Since this is PlaysForSure compliant firmware, and it worked flawlessly with Napster and WMP 0 (before the MTP driver was updated), it would seem to be a WMP beta issue. I'd like to hear more official confirmation on the subject, however.
    Some general details about my system are:
    Microsoft Windows XP Professional with Service Pack 2Verified GENUINE Microsoft operating system using Genuine Advantage ValidationIntel Pentium 4 CPU 3.2 GHz, Hyper-Threaded processor2.00 GB RAM
    Windows Media Player Version: .0.5358.4827Napster Version: 3.6.0.7 (US)
    Any recommendations? Fixes? Some have suggested rolling back the WMP installation, but I would like to consider this option only as an absolute last resort.
    Best regards,Matt

    Ok, this worked out accidentally - but happily
    I first installed the driver - not the media source - but the driver for the device.
    After that the windows device manager yellow sign disappeared - apparently the device driver was registered by windows.
    Then I Installed Mediasource 5 - the installation went thru fine.
    Does anyone have any recommended updates to install, please also advise what benefits.
    Thanks.

Maybe you are looking for

  • Can not open JAR file?

    Hello, My friend and I are working on a Calculus Project in which he made a Java applet that shows how a function's derivative is found... regardless! He made this file on a Linux based computer and saved it as a .jar file and sent to me via email. I

  • Change the Order of Fields in the Search Lookup Form

    Hi guys, The end user has requested me to change the order of the fields in the Search Lookup Form. I haven't found any configuration to change this order, so I changed the JSP (tjspLookupFormTiles.jsp) as below: <bean:define id="colIDsObj" name="loo

  • Pages 5.0.1 rotates images when exporting PDF

    In two sperate occasions I have inserted an image into a table cell, and also a shape.  I've scaled the image to the size of my liking.  When I exported the document to PDF (file > Export to > PDF) the PDF displays the images rotated 90 degrees and s

  • Tuner not working on my TouchSmart 300

    Situation:  Brand new TouchSmart with tuner not working out of the box.  Driver appears to be installed and working, but tuner will not pick up any channels. Both ATSC(antenna) and NTSC(converter box used) were scanned and nothing picked up in either

  • Canu00B4t Drag and drop a service over the model Workspace

    Hi guys, I´m trying to consume an Eservice published in the ServiceRegistry. I can see all the services in the result list when i search them, but when i try to drag and drop any of those service over the model workplace nothing happens. I hope someo