NOMAD Jukebox Zen Xtra 30gb dri

Hiya,
Sorry if its been asked before, but I installed a new Windows Vista 64bit about a month ago and since then I've searched all over the net trying to find a working driver that will allow me to transfer all of my music that I've collected over the years from my NOMAD Jukebox Zen Xtra30gb to my PC.
It worked fine with XP, but I need a 64bit driver for the USB connector.
Does anyone know where I can download a working driver?
Any help would be great!
Thanks

Does your player have the Plays For Sure Firmware http://support.creative.com/Products...me=MP3+Players If it doesn't do you still have access to a computer with XP

Similar Messages

Nomad Jukebox Zen Xtra 30GB mp3 player - Windows Vista

I no longer have the disc that came with my player and can't seem to find drivers to get my PC to recognize the player. Downloads seem to be for older operating systems maybe because the player is so old. When I try to downlod them I get errors. Not sure if I have the right drivers. Can anyone find them? Model # DAP-HDOO

I'm trying to find a way to make sure my Zen still works if I upgrade my OS to W7 (I've got the 60Gb version). You don't say which OS you are using, but I think it is relevant. Everyone seems to have a problem with Vista, and I've only found one place where they said they can get it to work with W7, using Compatibility Mode.
There is also a lot of stuff about a conflict with Windows Media Player v. I don't know if that was ever resolved, but people were advised to roll WMP back to v0.
Creative have pulled the plug on support for these machines, although you can still get the latest firmware from there. I'm reluctant to try it in case my machine crashes halfway through.
This is the text of the posting I found about W7. Good luck!
Creative Zen Xtra
Microsoft have certainly made the compatibility mode powerful in Windows 7!
I could only get basic use from my Zen Xtra in Vista, using Real Media Player
to play tracks from the Zen Xtra, but in Windows 7 it works flawlessly.
Basically the driver for the Zen Xtra is incompatible with Windows 7. However,
if you download the XP driver and right click the installation file and select
the Troubleshoot Compatibility heading and use the recommended settings to
install the driver, then install the Creative Mediascource 5 for Vista, then
the plugin for the Zen Xtra for Mediascource (both install without compatibility
mode), you will get a warning that the driver is incompatible but ignore this and
restart the computer. I then started Mediascource software, noticed the Zen
Xtra listed, clicked on 'Playlist', and it loaded, no problem! Playback, no
problems, transfer to player, no problems!
I am NOT using the 'Play 4 Sure' firmware update either!
Also for those with the Audigy 2 or 4 sound cards, Creative have issued a
beta driver for Windows 7, I am using this without the previous distortion
that the default Windows driver gives. Everything is cool! This was my main
reason for not replacing XP as my main OS.

Nomad Jukebox Zen Xtra 30GB- tried to upgrade firmware. Process hung, now nothing wo

This is really frustrating. I know my MP3 player is old, but it was working. Trying to find all the information I needed to have to upgrade this player so that it would work with Windows Vista was difficult. It wasn't all in the same place. I just kept searching and finally found what I thought was everything I needed. I tried to upgrade the firmware to Version 2.0.03 so I could use it with a Windows Vista computer. The process "hung" and now nothing works. I've tried to reinstall the .20.08 firmware, but the computer won't recognize that the player is connected. How can I get any firmware reloaded so I can try to upgrade again or at least still use the player on a Windows XP machine Thanks,

The same exact thing happened to me yesterday with my Zen Touch 40 GB player. It was working fine, now after my firmware upgrade attempt it's unrecognized by the PC and has no firmware installed but appears to be stuck in "Recovery Mode". There is obviously something wrong with the Creative Firmware update - this should be a very straightforward process, but instead it seems to be wrecking mp3 players. I contacted customer support and they offered to sell me assistance since my player is ancient (2 years old).

Nomad jukebox zen xtra firrmware version 1.03

i own a nomad jukebox zen xtra 30gb which has been running in excellent condition for three years..i want to make a database of all driver and firmware versions on my pc..
i've tried locating this firmware version(.03.02)?everywhere(creative downloads page included)..but haven't met with success..i would appreciate if anyone would tell me where to look for it..thanks in advance

First you must install the driver http://support.creative.com/Products...me=MP3+Players on the computer. Have a battery that is charged. What you did is you erased the firmware(reload O.S.)so the player has none. That is why you got the message you got. You are going to lose all the files(music) on the player because when you install the firmware? you are going to format the dri've before you do that.
Download & install the driver first. The version 2.0.00 driver Then check to see if player is recognized(plug it into a rear usb port if using a desktop NO USB HUBS) Download the firmware file to your desktop on the computer
<div class="DownloadBriefBox"><div class="DownloadNameBox">http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=28757&view=by_date_ ascending&page= <span class="DownloadSizeBox">

NOMAD JukeBox Zen Xtra driver will not inst

I plug in my NOMAD JukeBox Zen Xtra 30GB into my computer and it shows up as USB\VID_04e&PID_428 but the driver shows the ZEN Xtra as USB\VID_04e&PID_40. I changed USB\VID_04e&PID_40?to USB\VID_04e&PID_428 but it still doesn't work. It come up with error code 0?Suggestions???

Same problem here. Also tried editing the drivers with error code 0 "device cannot be started"
Message Edited by MaDc0w on 06-29-200708:54 AM

No driver found - Nomad Jukebox Zen Xtra - WinXP

I have used my Zen Xtra for over 2 years now, with the same PC I am currently having problems with. I recently had to do a complete reinstall of Windows (note that I have done at least 2 other complete reinstalls during the life of my Zen Xtra, with no problems). Windows Device Managers sees the NOMAD Jukebox Zen Xtra, but with the yellow question mark and exclamation point. Each attempt at driver installation results in the same problem. The driver ("JB3MV2_PCWDRV_US__30_03.EXE") installs completely, I'm told to reconnect my device so the driver can take effect. When I do, the device is still marked in Device Manager with exclamation point and yellow question mark, and Windows continues to ask if it can find and install the driver. I have told it not to (knowing that I just installed Creative's own driver), with no success, and other times let Windows try to install the driver (hoping it would find the Creative driver that was just installed). No luck. I have even done another complete reinstall of Windows, and tried to install the driver before any other program or hardware installations into my system. No luck. Note that there are no hardware changes between now and when I have done other complete Windows reinstallations. It just no longer accepts the Creative driver. I have also tried to install the driver in safe mode, with the same results. I have also completely removed the Zen Xtra (showing hidden devices in the Device Manager), and tried to reinstall. Firmware version of Zen Xtra was upgraded over a year ago to 2.0.03.
Specifics:
Windows XP Pro SP2
38GB free hard dri've space
Zen Xtra firmware version: 2.0.03

I have the same problem. But when i try to installl it it says he is missing an .nfo file.
I removed WMP and reinstalled WM0 because is crap.
I have Windows XP SP2
I have the newst firmware on it.
Can somebody help me with this because it's annoying not to put any new music on your mp3 player.
I never experienced this before even after formatting my HD.
Almost the same problem as fritzm but not completely because het gets an different error.
I have installed the CD but that doesnt work either.
I have installed the software from the website but that didnt help because he doesnt recognize my player.
Please help!!

Nomad jukebox zen xtra - cannot create file w message when trying totransfer fi

My 30G nomad jukebox zen xtra was working great until recently. Now when I power my player up after a day of no use, it takes 0-5 minutes to rebuild the library. When I begin to transfer files using Media source after a few transfers I get the "unable to create file" message and can no longer transfer. I have tried disk clean up and re-booting to no avail. I tried installing the new firmware and this worked for about 80 songs and then I began getting the same problems. I have completely cleaned my PC of adware and spyware and this has no effect. I love my player but am becoming a little frustrated. Would anyone have any ideas? This all started when I turned on my player one day and all of the music was gone. I re-transfereed everything back and later noticed that I had two of everything. I deleted all of the duplicates and from that point on it began to take 5 minutes to rebuild the library but I could still transfer files with no problems. One last thing, when I run disk cleanup in rescue mode, once it gets to 99% done it stalls there for about 0-5 minutes before going back to the rescue mode menu.
scott

i experienced the same problem. until 2 weks ago it worked fine. but a visited the support site and found out that all the software was new. so i downloaded the new versions. even the new firmware with the e at the end. i was at the edge to smash my monitor when i found out that after the firmware update the sound was hearing so quiet. after rebuil os and searching 2 hour on the net for the previous firmware release, prior to E release, i solve the sound problem.
but another appeard. cannot copy files on the player. if i choose to delete them, they disappear. i turn off the zen nx, turn back on and the files were still there. practically all the copy/delete/new folder/paste function were blocked. and the same problem on WIN XP and win 2000. all this because i installed the new versions for nomad explorer, nomad mediacenter, nomad plugin for media center.
solution: uninstalled all the creative software. put the original cd in the dri've. installed all the original software. it was running perfect. so, i could operate again in the data files on the player.
so i thought it was the driver problem since the media library i could access just fine. so i kept the original driver but installed all the new software (mediasource, nomad explorer, nomad zen plugin for mediasource).
guess what? the accesing proble appeard again. i think that the better solution is to stick to the original software.
and one last find. after the E firmware adveture, i experince what other are and was praing not to happen to me. the battery is lasting much much short period. and the green light if you look carefully is fluctuating in intensity. this was not happening until i burn the new E firmware. .0.02e. now after the rebuild os and writng a firmware it displays .0.02 without the E. the sound is like before. 24 damages your ears but the battery problem stills persit. it driving me crazy.

Nomad jukebox zen xtra firmware quest

Hello all,
happy to be on the boards. I have a few questions I would like to ask:
) what product do I have? on the front it says "nomad jukebox zen xtra" with 40gb on the side. is it a "zen xtra" or a "nomad jukebox"? I was trying to find updated firmware, but found both "zen xtra" and "nomad jukebox" on the creative site.
2) i've read horror stories of firmware 2..03. is there newer or firmware that works?
3) is there a way to treat this player as a regular hard dri've? as in when I plug it into Windows/Linux (Debian linux), it will be recognized as a regular hard dri've without much trouble?
Thanks all!

Oo
ps.
I didn't mean to take the hard dri've out and use it as a computer hard dri've. I meant: is there a way (maybe changing firmware?) to make the creative plug and play with windows without installing drivers?
An example: I want to go to a friend's house, plug my creative in, and copy a 5gb ISO off his computer. This is assuming he doesn't have the creative drivers.
I read that the 2..03 (or whatever the bad one is called) is supposed to allow this. Any solutions?

Nomad Jukebox Zen Xtra 60gp prob

Well, to start off with, I loved my mp3 player. So far, I ran into problems that I could not fix. I downloaded all of the updates that were needed. My mp3 player, a Nomad Jukebox Zen Xtra 60gb, suddenly would not work the same way. When the power adapter of battery are inserted, the player starts up. When they are pulled the player shuts down. One of the problems is when the player is on, it doesn't want to leave the main screen that says, "EAX". The hard dri've is not spinning, and no data is being accessed. I found on this website a page that tells users how to reset their mp3 player. For my mp3 player, it must be turned off for me to do a hard disk check, re-installation of operating system, or a format of the hard dri've...which is another problem, because I cannot turn it off. As I stated previously, the player is either on or off depending on if the battery is in or not. I am totally puzzeled. I cannot connect the player to the computer because of this problem. So either I have a new 60gb laptop hard dri've, or I figure out a way to get this to work. I haven't been able to find any threads like this or any users experiencing these problems.
Any help is greatly appreciated.
-Matt

Ok... I think I figured it out. I finally got into the recovery mode. I let the battery sit out of the mp3 player for a while, hoping that there is a capacitor that would run out of power. I put the battery back in and got into recovery mode. I ran disk clean up. Nothing changed. I had the same problem I first started off with. So I took the battery out again for an hour. Came back, and got back into recovery mode. I reinstalled the OS. Everything seems to be working fine.
I hope that anyone having a similar problem with this mp3 player can keep this in the back of their mind if they cannot get into recovery mode due to a boot up and shut down problem.
-Matt

Nomad Jukebox Zen Xtra 60GB not playing correctly anymore, help!!

Thanks. I keep getting directed to that knowledge base page, but it is not addressing my problem. My computer immediately tells me that the device has "malfunctioned" and the computer does not recognize it. I only have the usb cord that came with the zen, so I don't have another one to try. I love my zen and have staunchly defended it over the years vs. an i-pod. However, this is my 2nd onI've had my Nomad Jukebox Zen Xtra 60GB for over 5+ years. It has worked great, with minimal problems. I had a firmware update issue quite a while back. I'm not sure how to resolve this problem. Here is the situation:
Nomad Jukebox Zen Xtra 60GB is fully charged and ready to use.
I tried loading a set playlist but it won't load. So I tried another, and it doesn't load. Not sure what to do, I go to the menu. This time I choose an artist/band. The music loads, but it doesn't play. I try again, then it starts to play. So I load a few other artists that way. It seems like I had a issue to work out later. Being away from my computer that was going to have to wait. After some time the Nomad Jukebox Zen Xtra 60GB started to start N stop diferent songs. A few times it froze while playing a song. Then would unfreeze to play another, then suddenly start playing the previous one. After about 0-5 minutes of this I decided I had enough. So I planned to empty the playlist, and turn it off. It took me atleast three attempts to empty the playlist and turn it off.
Are these problems fixable What are they hardware or software
Would an OS or firmware update fix these problems Is my Nomad Jukebox Zen Xtra 60GB hard dri've going Can I get a replacement Or do I need to buy a new player
Please help me get my player working. I really like this model, I'd hate to have to replace it.
in 5 years. (The first one fried itself, but fortunately was still under warrantly.) Sadly, I, too, am considering moving on. I onlyreceived generic help fromthe Creative SupportTeam (who ultimately told me my zen is "unrepairable" when their one-size-fits-all solutions didn't work).Since there seems to be an overwhelming # of people experiencing similar problems, maybe the time is right to make the change, especially since an iPod classic 60 GB (7th Generation) is quite affordable these days.
[/B]

Formatting will erase all the files on the player,Cleanup scans the disc & corrects file system errors,broken links (from when you delete things)ect. but does NOT repair bad sectors,Reboot then rebuilds the file system. I'd do the Cleanup>Reboot first to see if that solves the problem.here you will find how to open the player to see what dri've is in there. You can then search Ebay or Google the model number to find another one.

Windows 7 Support Nomad Jukebox Zen Xtra

I have a Nomad Jukebox Zen Xtra MP3 player. The hard dri've crashed on my old computer ( which used the wiindows XP operating system). I bought a laptop which uses Windows 7. I don't seem to be able to find a way to access the MP3 player with the windows 7 computer. I don't need?a lot of functionality. I would be happy to put tags on MP3 files with some other software, if only there was a way to get this laptop to talk to the MP3 player. Any suggestions?
Thanks,
Ed

If you can find a PC running Windows XP with Windows Media Player 0 installed you can install the?Creative Zen Xtra PlaysForSure Firmware 2.0.03 - this will turn the player into an MTP device so you will not need to install any special drivers/software to copy music or other files to it (as long as the computer has Windows Media Player 0 or later installed - so Vista or 7 will be fine, as will up-to-date versions of XP).
I could not get the firmware installer to work with Windows Media Player installed on XP (it claims the player is not plugged in) but Windows Media Player 0 works reliably. As Windows Vista comes with WMP and Windows 7 with WMP 2 you'll need to find an XP machine to install the firmware, though once installed you can use the player with any modern OS.
As I run Vista on my PC I had to resort to installing XP in VirtualBox to run the firmware installer but I would strongly recommend trying to find a real PC before resorting to emulators!
Edit: If possible, back up your files before updating the firmware - if I remember correctly updating to the PlaysForSure firmware does delete all of your existing files, but even if I haven't remembered correctly it's worth doing just in case..!

Nomad Jukebox Zen Xtra 60 GB can't be found through Mediasource Organizer

I have been using the Creative Nomad Jukebox Zen Xtra HDD Player since a few years and I have always been satisfied. But recently, I had a massi've computer problem, forcing me to do a complete re-install of Windows XP, without the chance to backup my old XP.
So of course I also needed to reinstall the Nomad Player. However, since I can't find the CD-Rom with the driver, I had to download (almost) everything.
At first I installed the drivers of the player and then I installed the Nomad Explorer (I still had that one on an old HDD). When I start the Nomad Explorer, the player connects and I can see the music that is stored on the player.
However, in the past I never used the Nomad Explorer, I always used Media Source Organizer. I think in the past I had Version 3 and later I updated it to Version 5. So now I went for Version instantly. I downloaded it and installed it. But here it starts to get strange. I closed the Nomad Explorer and disconnected the player, then I installed the Organizer. During the installation, I was told that the organizer can't find any supported devices, I should connect and start the player and try again. So I did. This time, the installation finished itself - but when I startet Media Organizer, it couldn't find my player.
I once read something like that you need at least Windows Media Player 0 or . Since I had 9, I installed 0, but that didn't change a thing.
So, does anyone have an idea what I am doing wrong ? Or maybe I forgot to install some normal Windows stuff, that is required by Media Organizer ? For example, I haven't installed DirectX yet (but I tell you that just as an example, I don't think that it's DirectX related)

You need the Creative Nomad Jukebox? plug-in 5.00.22 for Creative MediaSource5 found here.http://support.creative.com/Products...me=MP3+Players

Nomad Jukebox Zen Xtra won't turn

My problem is exactly as the title states. I have a Nomad Jukebox Zen Xtra (40 gig HD) and I cannot get it to power on. This problem has been occuring since yesterday evening. I try to plug it into the computer via the USB cable, but this does nothing. The same is true of plugging it into a wall outlet with the charger that came with it. I can't tell you what the firmware on it is, as I have no ability to view that.
Any suggestions as to what I can try next?

I have (and left it out for fi've minutes, per another suggestion in another thread). Thanks to both of you for your help, I'm in contact with Creative's customer support via email now (thankfully it's within the 90 day warranty period)

Nomad Jukebox Zen Xtra connection probl

Hello Everyone.
First off, I am using Nomad Jukebox Zen Xtra (30G) with Windows XP - SP2. A few days ago my Zen Xtra would connect to my pc but as of today it no longer does. After searching through similar posts I am assuming it's not a problem with my Zen but with my PC. None the less, I did do my best to troubleshoot myself. I downloaded all possible firmware/drivers from Nomadworld.com. However - the firmware upgrade would not complete due to the fact that my device is not connected. I tried connecting my player to other USB ports on my PC - no luck. I used Nomad Explorer to do my transfers and as suggested in the FAQ, I tried downloading others (ie: MediaSource) however these wouldn't install because it could not detect any device. When I go to Device Manager/USB/ my Nomad isn't even listed. I have tried 3 different USB cables. The player isn't locked. Other devices work with the usb cables and port (ie: logitec clicksmart camera)
So now assuming it is a PC problem, where do I go from now? Thanks in advance for any help you can give me

Hibbs,
Thank you for your response. The only thing that comes to mind is k-lite codec pack I downloaded and installed for the Indeo codec needed for my clicksmart 820. I'm not sure if that would have anything to do with the disruption of my device. The camera itself worked but wouldn't record videos until I installed the codec. Everything else to my knowledge is the same. No other new USB devices installed either.

Nomad Jukebox Zen Xtra VS Winows Media Player - Help?

I have a 40gig Nomad Jukebox Zen Xtra - a computer crash a year ago resulted in a replacement by the computer company - and it came with Windows Media Player.... when I tried to run it and had already installed the Creative software/Music library - Media Player crashed my computer every time - had to uninstal...,. now - that computer is defecti've and has just been replaced again by the maker - and before I load the Creatai've Software wondered if this is what is interfering with Media Player? Does anyone know? When I buy music it looks for Windows Media Player I believe - and I can play it and transfer the music in Creative program - BUT - it no longer lists my music library as single songs but as folders - and I have to go specifically into a remote folder to try to find the downloaded music and transfer to the Nomad....
Any help is appreciated..... I'm lost!
Thanks
KB

The firmware update only works on a windows XP machine.
you also need to have Windows media player 0 installed
you must not have windows media player or windows media player runtime lurking in your windows XP add/remove programmes bit on the control panel.
if you do have WMP first remove it ( roll back) then re-boot, then remove windows media player runtime ( rioll back) and re-boot.
open windows media player, if it is windows media player 0 then you should be OK, if its windows media player 9 you need ot download and install windows media player 0.
Check again to make sure that windows media player and windows media player runtime are not in the add/rmove programs.
Back up everything on the player, all music, playlists and data files.
update the firmware.
if it stalls part way, like it did for me the last time i updated a Zen Xtra ( last weekend -installing a new motherboard ) dont panic.
it will go to rescue mode, close the firmware update, the player will go to rescue mode, then re-satart the update, on the zen xtra, slect re-load OS then on the firmware update click on English. then slect re-load os on the player.
make sure that the player is fully charged, and that the mains charger is also attached.
just out of interest, when you remove the front panel on your zen xtra to get to the battery, does the headphone jack ( visable through a hole in the top right) have a blob of red paint on

NOMAD Jukebox Zen Xtra 30gb dri

Similar Messages

Maybe you are looking for