NOMAD Jukebox Zen Xtra file recovery from working harddri

My USB port on my NOMAD Jukebox Zen Xtra is basically non-functional. The drive works fine so i'm not trying to recover "corrupted" files, just ones that exist on the drive... Is there any way I can access the files on the hard drive directly if I remove it from my Nomad Is there any way to use a hard drive connector (from a USB case) where the board plugs into the drive and the other end connects via USB to my computer (which has my Nomad software on it's) As the USB connector on the Nomad isn't working, is there any way i can get my music off the drive
Thanks!

Does this happen with all tranfers or any certain audio files? Have you try reinstalling the driver or try running Cleanup in Rescue mode.
JasonMessage Edited by Jason-CL on 09-04-2006 04:46 PM

Similar Messages

Nomad jukebox zen xtra - cannot create file w message when trying totransfer fi

My 30G nomad jukebox zen xtra was working great until recently. Now when I power my player up after a day of no use, it takes 0-5 minutes to rebuild the library. When I begin to transfer files using Media source after a few transfers I get the "unable to create file" message and can no longer transfer. I have tried disk clean up and re-booting to no avail. I tried installing the new firmware and this worked for about 80 songs and then I began getting the same problems. I have completely cleaned my PC of adware and spyware and this has no effect. I love my player but am becoming a little frustrated. Would anyone have any ideas? This all started when I turned on my player one day and all of the music was gone. I re-transfereed everything back and later noticed that I had two of everything. I deleted all of the duplicates and from that point on it began to take 5 minutes to rebuild the library but I could still transfer files with no problems. One last thing, when I run disk cleanup in rescue mode, once it gets to 99% done it stalls there for about 0-5 minutes before going back to the rescue mode menu.
scott

i experienced the same problem. until 2 weks ago it worked fine. but a visited the support site and found out that all the software was new. so i downloaded the new versions. even the new firmware with the e at the end. i was at the edge to smash my monitor when i found out that after the firmware update the sound was hearing so quiet. after rebuil os and searching 2 hour on the net for the previous firmware release, prior to E release, i solve the sound problem.
but another appeard. cannot copy files on the player. if i choose to delete them, they disappear. i turn off the zen nx, turn back on and the files were still there. practically all the copy/delete/new folder/paste function were blocked. and the same problem on WIN XP and win 2000. all this because i installed the new versions for nomad explorer, nomad mediacenter, nomad plugin for media center.
solution: uninstalled all the creative software. put the original cd in the dri've. installed all the original software. it was running perfect. so, i could operate again in the data files on the player.
so i thought it was the driver problem since the media library i could access just fine. so i kept the original driver but installed all the new software (mediasource, nomad explorer, nomad zen plugin for mediasource).
guess what? the accesing proble appeard again. i think that the better solution is to stick to the original software.
and one last find. after the E firmware adveture, i experince what other are and was praing not to happen to me. the battery is lasting much much short period. and the green light if you look carefully is fluctuating in intensity. this was not happening until i burn the new E firmware. .0.02e. now after the rebuild os and writng a firmware it displays .0.02 without the E. the sound is like before. 24 damages your ears but the battery problem stills persit. it driving me crazy.

Moving music from my nomad jukebox zen xtra to my

I am trying to move my music from my nomad jukebox zen xtra to my pc - i cant get the creative media source to recognize my player - i tried windows media player and comcast rhapsody - it recognized my player but wont let me highlight music to move to my PC
any ideas please?
many thanks

[size="2" face="Helv">You must install the specific MP3 player plugin for MediaSource. Here is what you should do:
- Download and install the latest Creative MediaSource Player/Organizer 3.30.2 from your product download site. Make sure that you install this first before installing the rest of the MediaSource plugins listed below.
- (Depending on your product and firmware)
For non-PlaysForSure Zen Xtra: Download and install the latest Creative Zen and NOMAD Jukebox plugin 2.00.20 for Creative MediaSource from your product download site.
or:
For PlaysForSure Zen Xtra: Download and install the Creative Software Suite for PlaysForSure-enabled Creative NOMAD Jukebox Zen Xtra Players.

No driver found - Nomad Jukebox Zen Xtra - WinXP

I have used my Zen Xtra for over 2 years now, with the same PC I am currently having problems with. I recently had to do a complete reinstall of Windows (note that I have done at least 2 other complete reinstalls during the life of my Zen Xtra, with no problems). Windows Device Managers sees the NOMAD Jukebox Zen Xtra, but with the yellow question mark and exclamation point. Each attempt at driver installation results in the same problem. The driver ("JB3MV2_PCWDRV_US__30_03.EXE") installs completely, I'm told to reconnect my device so the driver can take effect. When I do, the device is still marked in Device Manager with exclamation point and yellow question mark, and Windows continues to ask if it can find and install the driver. I have told it not to (knowing that I just installed Creative's own driver), with no success, and other times let Windows try to install the driver (hoping it would find the Creative driver that was just installed). No luck. I have even done another complete reinstall of Windows, and tried to install the driver before any other program or hardware installations into my system. No luck. Note that there are no hardware changes between now and when I have done other complete Windows reinstallations. It just no longer accepts the Creative driver. I have also tried to install the driver in safe mode, with the same results. I have also completely removed the Zen Xtra (showing hidden devices in the Device Manager), and tried to reinstall. Firmware version of Zen Xtra was upgraded over a year ago to 2.0.03.
Specifics:
Windows XP Pro SP2
38GB free hard dri've space
Zen Xtra firmware version: 2.0.03

I have the same problem. But when i try to installl it it says he is missing an .nfo file.
I removed WMP and reinstalled WM0 because is crap.
I have Windows XP SP2
I have the newst firmware on it.
Can somebody help me with this because it's annoying not to put any new music on your mp3 player.
I never experienced this before even after formatting my HD.
Almost the same problem as fritzm but not completely because het gets an different error.
I have installed the CD but that doesnt work either.
I have installed the software from the website but that didnt help because he doesnt recognize my player.
Please help!!

Nomad Jukebox Zen Xtra: Nomad Explorer says Not connected ... first time u

I just bought a Nomad Jukebox Zen Xtra. I used the installation CD to install everything and Windows automatically tried to locate a driver for it but it was not successful, so I downloaded the driver for the Zen Xtra from this website and installed it.
However, when I open "Nomad Explorer" it shows the player's logo with a red X and says "Not connected". How do I get the player to connect to the computer?
This is my first time using a Nomad Jukebox Zen Xtra and I have limited computer knowledge, but I know all my USB ports are working.
Any help would be appreciated.
-John

Hi!?I'm having the same problem. I bought the player, but after a couple of weeks I've exchanged it, because of some hardware problem. The original player worked all right, but the new one is not recognized by NOMAD Explorer ("not connected"), and?I also?can't copy files via Windows Explorer. The strange thing is I managed to copy a couple of albums, but then it'sstarted to hang the Explorer. The firmware version is 2.0.03. I reinstalled the drivers and NOMAD Explorer - didn't help. PS: You've got to help me, 'cause my iPod-loving friends laugh at me, so it's my and Creative's reputation we're talking about

Nomad Jukebox Zen Xtra 60GB not playing correctly anymore, help!!

Thanks. I keep getting directed to that knowledge base page, but it is not addressing my problem. My computer immediately tells me that the device has "malfunctioned" and the computer does not recognize it. I only have the usb cord that came with the zen, so I don't have another one to try. I love my zen and have staunchly defended it over the years vs. an i-pod. However, this is my 2nd onI've had my Nomad Jukebox Zen Xtra 60GB for over 5+ years. It has worked great, with minimal problems. I had a firmware update issue quite a while back. I'm not sure how to resolve this problem. Here is the situation:
Nomad Jukebox Zen Xtra 60GB is fully charged and ready to use.
I tried loading a set playlist but it won't load. So I tried another, and it doesn't load. Not sure what to do, I go to the menu. This time I choose an artist/band. The music loads, but it doesn't play. I try again, then it starts to play. So I load a few other artists that way. It seems like I had a issue to work out later. Being away from my computer that was going to have to wait. After some time the Nomad Jukebox Zen Xtra 60GB started to start N stop diferent songs. A few times it froze while playing a song. Then would unfreeze to play another, then suddenly start playing the previous one. After about 0-5 minutes of this I decided I had enough. So I planned to empty the playlist, and turn it off. It took me atleast three attempts to empty the playlist and turn it off.
Are these problems fixable What are they hardware or software
Would an OS or firmware update fix these problems Is my Nomad Jukebox Zen Xtra 60GB hard dri've going Can I get a replacement Or do I need to buy a new player
Please help me get my player working. I really like this model, I'd hate to have to replace it.
in 5 years. (The first one fried itself, but fortunately was still under warrantly.) Sadly, I, too, am considering moving on. I onlyreceived generic help fromthe Creative SupportTeam (who ultimately told me my zen is "unrepairable" when their one-size-fits-all solutions didn't work).Since there seems to be an overwhelming # of people experiencing similar problems, maybe the time is right to make the change, especially since an iPod classic 60 GB (7th Generation) is quite affordable these days.
[/B]

Formatting will erase all the files on the player,Cleanup scans the disc & corrects file system errors,broken links (from when you delete things)ect. but does NOT repair bad sectors,Reboot then rebuilds the file system. I'd do the Cleanup>Reboot first to see if that solves the problem.here you will find how to open the player to see what dri've is in there. You can then search Ebay or Google the model number to find another one.

Hooking a camera to Nomad jukebox Zen Xtra using a belkin USB bri

Has anyone tried to transfer files from a digital camera to a Nomad jukebox Zen Xtra using a belkin USB bridge? Or any of the other Creative Mp3 players? If not does anyone know any other way to use the mp3 player as photo storage when traveling without use of computer?

It certainly won't work with the Zen players because they use a non-standard format.
There's the possibility that it should work with the MuVo players as they are just USB mass storage, but I've heard mention of someone that supposedly tried it and it doesn't. Am I right in thinking the Belkin USB bridge is for the iPod, or is it supposed to work for any USB mass storage player?

Missing Songs on Nomad Jukebox Zen Xtra - 40GB. Player empty but space not 1

I have the Nomad Jukebox Zen Xtra 40GB.
Over the last couple of weeks I?ve been slowly ripping my CDs, using Creative MediaSource and then adding them to my Nomad player. Recently, I went to turn on my player and notice it saying ?rebuilding library?. I thought nothing of it. I then went to see how many songs and albums were on the player and from what I could tell it looked like a lot less than what I thought I had copied over. The songs were something like 3750 and the number of albums was something like 350, which was far less than what I thought it should be but was not 00% for sure. Total free space was something like 7800MB.
Anyway, yesterday, I tried to copy over some new songs that I had just ripped from CDs. ? of the way through the battery died on the Zen player so it stopped transferring. I went to charge the player and when turned it on the player said ?rebuilding library?. There should, at this point, had been 4500+ songs. I went and tried to copy over the files again, from my computer, and noticed that the songs that I had just copied and would have been skipped, were being copied over again. When I went to check Settings, About the player said I had the ~3750 songs plus the additional songs that had just copied over. At this point I just copied over the new songs bringing my total count to 4634. To be safe, I copied all the songs from my Zen back to a new computer, using Creative MediaSource. After copying over all the files, I then tried a reset of the player, thinking this would delete all the files on the Zen. Instead it did the ?rebuilding library?. When I went back to Settings, About, on the Zen player, it again said there was the ~3750 songs and ~350 albums. So the ?rebuilding library? on my Zen player keeps on removing/hiding my songs and albums.
Since nothing was working, I connected my Zen to my computer again and using the Creative MediaSource deleted all the songs on my Zen player. When I was done it is showing No. of Tracks: 0. Total Memory: 3833MB. Free Memory though is only 8659MB.
There is nothing on my Zen player that I can see. Even using Windows Explorer and Nomad Explorer, it is completely blank.
Someone help please. How do I get back my missing songs and/or reset the player? If at all possible I?d like to get the missing songs off the player since I don?t have those ripped songs on my computer and don?t feel like ripping all those songs again. What is going on?

PaulS7 wrote:
Thank you. I'm trying that now. I see that I can reload the OS (Firmware). Does anyone know where I can find out what the latest firmware is to see if I need to upgrade? How do I find out what the latest firmware is and where do I go to upgrade?
Make sure to read the FAQ post. All downloads are got from Nomadworld.com downloads.

Nomad Jukebox Zen Xtra connection probl

Hello Everyone.
First off, I am using Nomad Jukebox Zen Xtra (30G) with Windows XP - SP2. A few days ago my Zen Xtra would connect to my pc but as of today it no longer does. After searching through similar posts I am assuming it's not a problem with my Zen but with my PC. None the less, I did do my best to troubleshoot myself. I downloaded all possible firmware/drivers from Nomadworld.com. However - the firmware upgrade would not complete due to the fact that my device is not connected. I tried connecting my player to other USB ports on my PC - no luck. I used Nomad Explorer to do my transfers and as suggested in the FAQ, I tried downloading others (ie: MediaSource) however these wouldn't install because it could not detect any device. When I go to Device Manager/USB/ my Nomad isn't even listed. I have tried 3 different USB cables. The player isn't locked. Other devices work with the usb cables and port (ie: logitec clicksmart camera)
So now assuming it is a PC problem, where do I go from now? Thanks in advance for any help you can give me

Hibbs,
Thank you for your response. The only thing that comes to mind is k-lite codec pack I downloaded and installed for the Indeo codec needed for my clicksmart 820. I'm not sure if that would have anything to do with the disruption of my device. The camera itself worked but wouldn't record videos until I installed the codec. Everything else to my knowledge is the same. No other new USB devices installed either.

Nomad Jukebox Zen Xtra VS Winows Media Player - Help?

I have a 40gig Nomad Jukebox Zen Xtra - a computer crash a year ago resulted in a replacement by the computer company - and it came with Windows Media Player.... when I tried to run it and had already installed the Creative software/Music library - Media Player crashed my computer every time - had to uninstal...,. now - that computer is defecti've and has just been replaced again by the maker - and before I load the Creatai've Software wondered if this is what is interfering with Media Player? Does anyone know? When I buy music it looks for Windows Media Player I believe - and I can play it and transfer the music in Creative program - BUT - it no longer lists my music library as single songs but as folders - and I have to go specifically into a remote folder to try to find the downloaded music and transfer to the Nomad....
Any help is appreciated..... I'm lost!
Thanks
KB

The firmware update only works on a windows XP machine.
you also need to have Windows media player 0 installed
you must not have windows media player or windows media player runtime lurking in your windows XP add/remove programmes bit on the control panel.
if you do have WMP first remove it ( roll back) then re-boot, then remove windows media player runtime ( rioll back) and re-boot.
open windows media player, if it is windows media player 0 then you should be OK, if its windows media player 9 you need ot download and install windows media player 0.
Check again to make sure that windows media player and windows media player runtime are not in the add/rmove programs.
Back up everything on the player, all music, playlists and data files.
update the firmware.
if it stalls part way, like it did for me the last time i updated a Zen Xtra ( last weekend -installing a new motherboard ) dont panic.
it will go to rescue mode, close the firmware update, the player will go to rescue mode, then re-satart the update, on the zen xtra, slect re-load OS then on the firmware update click on English. then slect re-load os on the player.
make sure that the player is fully charged, and that the mains charger is also attached.
just out of interest, when you remove the front panel on your zen xtra to get to the battery, does the headphone jack ( visable through a hole in the top right) have a blob of red paint on

Nomad Jukebox Zen Xtra 60gp prob

Well, to start off with, I loved my mp3 player. So far, I ran into problems that I could not fix. I downloaded all of the updates that were needed. My mp3 player, a Nomad Jukebox Zen Xtra 60gb, suddenly would not work the same way. When the power adapter of battery are inserted, the player starts up. When they are pulled the player shuts down. One of the problems is when the player is on, it doesn't want to leave the main screen that says, "EAX". The hard dri've is not spinning, and no data is being accessed. I found on this website a page that tells users how to reset their mp3 player. For my mp3 player, it must be turned off for me to do a hard disk check, re-installation of operating system, or a format of the hard dri've...which is another problem, because I cannot turn it off. As I stated previously, the player is either on or off depending on if the battery is in or not. I am totally puzzeled. I cannot connect the player to the computer because of this problem. So either I have a new 60gb laptop hard dri've, or I figure out a way to get this to work. I haven't been able to find any threads like this or any users experiencing these problems.
Any help is greatly appreciated.
-Matt

Ok... I think I figured it out. I finally got into the recovery mode. I let the battery sit out of the mp3 player for a while, hoping that there is a capacitor that would run out of power. I put the battery back in and got into recovery mode. I ran disk clean up. Nothing changed. I had the same problem I first started off with. So I took the battery out again for an hour. Came back, and got back into recovery mode. I reinstalled the OS. Everything seems to be working fine.
I hope that anyone having a similar problem with this mp3 player can keep this in the back of their mind if they cannot get into recovery mode due to a boot up and shut down problem.
-Matt

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

Windows 7 Support Nomad Jukebox Zen Xtra

I have a Nomad Jukebox Zen Xtra MP3 player. The hard dri've crashed on my old computer ( which used the wiindows XP operating system). I bought a laptop which uses Windows 7. I don't seem to be able to find a way to access the MP3 player with the windows 7 computer. I don't need?a lot of functionality. I would be happy to put tags on MP3 files with some other software, if only there was a way to get this laptop to talk to the MP3 player. Any suggestions?
Thanks,
Ed

If you can find a PC running Windows XP with Windows Media Player 0 installed you can install the?Creative Zen Xtra PlaysForSure Firmware 2.0.03 - this will turn the player into an MTP device so you will not need to install any special drivers/software to copy music or other files to it (as long as the computer has Windows Media Player 0 or later installed - so Vista or 7 will be fine, as will up-to-date versions of XP).
I could not get the firmware installer to work with Windows Media Player installed on XP (it claims the player is not plugged in) but Windows Media Player 0 works reliably. As Windows Vista comes with WMP and Windows 7 with WMP 2 you'll need to find an XP machine to install the firmware, though once installed you can use the player with any modern OS.
As I run Vista on my PC I had to resort to installing XP in VirtualBox to run the firmware installer but I would strongly recommend trying to find a real PC before resorting to emulators!
Edit: If possible, back up your files before updating the firmware - if I remember correctly updating to the PlaysForSure firmware does delete all of your existing files, but even if I haven't remembered correctly it's worth doing just in case..!

Software Setup- Nomad Jukebox Zen Xtra 3

i've formatted and rebooted my Nomad Jukebox Zen Xtra. I've tried downlaoding all sorts of things from nomadworld.com and nothing seems to work with Creative Mediasource. Its got the new firmware and i tried to download and install the plugin for all the nessisary items, but when i attempt to install it, it says an error has occured and forces me to close it.
if anyone could provide me with links to what i need to download to have my computer recognize and put mp3s on it, it would be appreciated.

You need to download the following:
. Creative Zen and Jukebox Driver Upgrade version .30.03
2. Creative MediaSource Player/Organizer 3.30.2
3. Creative Software Suite for PlaysForSure-enabled Creative NOMAD Jukebox Zen Xtra Players
Install . then connect the player to the PC. Then install 2. and 3. (the player must be connected for 2. to verify you have a Creative product).
If they won't install then it suggests a problem with Windows, so make sure everything is OK there and clear out your temp folders.

Nomad jukebox zen xtra firrmware version 1.03

i own a nomad jukebox zen xtra 30gb which has been running in excellent condition for three years..i want to make a database of all driver and firmware versions on my pc..
i've tried locating this firmware version(.03.02)?everywhere(creative downloads page included)..but haven't met with success..i would appreciate if anyone would tell me where to look for it..thanks in advance

First you must install the driver http://support.creative.com/Products...me=MP3+Players on the computer. Have a battery that is charged. What you did is you erased the firmware(reload O.S.)so the player has none. That is why you got the message you got. You are going to lose all the files(music) on the player because when you install the firmware? you are going to format the dri've before you do that.
Download & install the driver first. The version 2.0.00 driver Then check to see if player is recognized(plug it into a rear usb port if using a desktop NO USB HUBS) Download the firmware file to your desktop on the computer
<div class="DownloadBriefBox"><div class="DownloadNameBox">http://forums.creative.com/creativelabs/board/message?board.id=dap&thread.id=28757&view=by_date_ ascending&page=

NOMAD Jukebox Zen Xtra file recovery from working harddri

Similar Messages

Maybe you are looking for