Nomad Zen NX - plays slo

I have a Nomad Zen NX that works well ost of the time. However, sometimes when I rip a talking mp3 to it, it replays slowly, at about half speed. This doesn't happen to all and not with music. If I link the player tomy computer and play it through the computer it is OK. This problem only occurs when the player is running on battery power. Can anyone help me?
Kerry

The most likely explanation is the sampling frequency is too low and not supported, usually kHz. The Zens only support 22 and 44kHz.

Similar Messages

  • Windows XP driver problem - Nomad Zen Xtra and Zen To

    I have both a Nomad Zen Xtra 60GB and a Zen Touch 20GB, both of which were working fine with my Windows XP Pro SP2 computer until a couple of days ago. I had recently put firmware 2.0.03 onto the Zen Xtra, and was using the drag-and-drop method in Windows Explorer to copy loads of albums across to it from my music folder. It seems I might have tried to copy too much over at one go, because eventually the file copying just stopped, and I had to unplug the Zen Xtra from the PC to abandon the copy process. Since then, neither Zen device has been properly recognised by any of my PCs. When I plug the Zen Xtra into?a USB port, Windows brings up the messages: "Found new hardware: Nomad Jukebox Zen Xtra" and "Found new hardware: MTP device", then brings up the Found New Hardware Wizard, even though firmware 2.0.03 is supposed to provide "seamless support with any computer running Microsoft? Windows Media? Player 0 and Windows? XP - no drivers or software needed" (I have WMP0.00.00.4036 installed). The Zen Xtra's display does not show the "docked" icon except when plugged into my laptop (running XP Home Edition)... but even on the laptop Windows still asks for a driver, which it then fails to install properly. When I plug my Zen Touch into my PC, it detects that an MTP device has been connected, but Windows Media Player doesn't list it under the Sync tab, and when I try to install the "Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players", the installer complains that "Setup could not detect any portable device on your system... please ensure that Zen Touch PlaysForSure Firmware is properly installed". The device's firmware version is 2..0, and as I have already said, both this and the Zen Xtra were working fine with my PC up until a couple of days ago. Additionally, the "docked" icon?no longer appears?on the Zen Touch's display when plugged into the PC. I have made the registry change suggested in Creative Knowledge Base Solution ID #9287, and my PC is up-to-date with Windows Hotfixes. I've also tried uninstalling all Creative programs and reinstalling them one at a time, but I can not get my PC to correctly work with the Zen devices anymore. Any suggestions? Also, is there some kind of Factory Reset that I can do to get my Zen Xtra back to an earlier firmware?

    I had the same issue. My battery ran down during a sync, then I was unable to sync again.
    The Zen is showing up fine in the device manager, but none of the software (Media Player, MediaSource) sees it.
    Finally, after a day of trying new drivers, running cleanup, etc. I decided to go into the Zen's recovery menu. To get there, press and hold the Play button and press and hold the reset (use a paperclip) button while powering up.
    Once there, select the first option in the menu to Clean up the system. I forgot what it's called and I'm in the middle of a sync now, so can't look.
    Worked fine after that. Phew!
    If your device is being detected fine, but cannot sync, try that and post here if it fixes it.
    Tooner
    evokefrank.googlepages.com

  • MP3Pro vs. Regular MP3 for a Nomad Zen Xt

    I have a Nomad Zen Xtra and I use Musicmatch Jukebox to rip my CDs. Does anyone have any experience with this combination of hardware and software, and if so, would you recommend that I rip CDs in MP3Pro format at the highest quality (96) vs. ripping in straight MP3 format at 60 or so? Thanks.

    MP3Pro works by layering two pieces of data, or something like this (Google will turn up the exact details). It uses a standard 64kbit/s section, and then the additional higher quality data on top of this. So an MP3Pro file will play on something that doesn't support it as a 64kbit/s MP3. So it doesn't play <EM>perfectly</EM>, but it will play some of the data.
    Ironically the person who posted about this before in another thread failed to realise it was playing just a 64kbit/s MP3 (they thought it was the full MP3Pro file) so I'm not too sure I would trust their ability to judge sound quality Message Edited by SSR on 05-08-2005 06:56 PM

  • Nomad Zen Xtra using Windows 98 (Not 98

    Good day,
    I thought I'd share this information since I couldn't find anything about it during the past few weeks when I was looking.
    I decided to leap into the MP3 world and after much research concluded the Jukebox 3 was the player for me, only to find out it was no longer manufactured! So I continued my hunt and decided on a Nomad Zen Xtra 30GB unit.
    The only problem is it says it needs Windows 98SE and I unfortunately am still running 98 (laugh if you must). So when I got the unit I thought I might as well try and see if it works before going through all the hassle of upgrading an operating system.
    It works! I was able to install the CD and update the new drivers, firmware and Nomad Explorer files off of Creative Downloads. The only thing that does not work is Creative MediaSource/Organizer software. This isn't too big a deal from what I can see as it is the MP3 ripper. I downloaded a freeware program called CDex (which is great by the way) and I rip all my CD's using this then use NOMAD Explorer to load it on the dri've. FYI, I also had to download the latest Adaptec APSI driver as well so CDex would work.
    Nomad Explorer can also set-up the playlists although I understand it is somewhat easier using the Creative software. I am not sure if I am missing any other big features but it seems to be doing everything I want of it and I love it.
    Anyhow, I'm about 8GB into it and all is working very well and I am happy that I didn't have to spend hours on a operating system upgrade.
    Hope this helps someone!Paul

    I have a Zen Xtra 40GB and I'm using Windows 98SE and I have not been able to get things to work. I tried using the installation disk and it could not complete the install....it would hang up at the point where the drivers were being loaded. After some playing around I got the drivers installed, but Nomad Explorer did not see that the MP3 player was connected. I also tried MediaSource (it loaded on just fine) and it recognized the player, but would crash when the program tried to "read" from the player. I plan to return the player and get my money back.

  • Zen Xtra plays by itself

    Hi,
    My 40Gb Nomad Jukebox Zen Xtra plays by itself even though I've shut it down. What can I do to stop it doing this?
    Thanks
    Ste

    Kirisame,
    Do you happen to have the player alarm enabled?
    Jason

  • Zen Sleek Photo and Nomad Zen X

    I posted earlier about problems with Vista and the Zen Sleek Photo mp3 player. The Zen software is not compatible and won?t install.
    After receiving some information from Creative, and after some further experimenting on my own, I have put together a procedure that will, in fact, do a full install of the Zen Sleek Photo on a machine running Vista.
    I have also discovered that this installation procedure also works for my Nomad Zen Xtra ? a nice bonus!
    I will send this info, in Word document form, to anyone who requests it. Just email me at:
    [email protected]
    It worked for me, and I have received feedback from several people already who have used this procedure with 00% success, so I know that it works!
    Dave McClay

    Hey Chickybabe,
    I also own a Zen Sleek photo, and while I haven't had any of the problems you have mentioned with Napster; one problem you should watch for (currently experiencing it for the 2nd time!) is trying to play your music from Napster and not being able to because you get a message saying that "No license to play this track". And it's a huge problem, as it doesn't just affect one song, but your ENTIRE library. I fixed it once and am trying to find out how to do it again. Once I do, I'll probably leave Napster, but I will probably have to download ALL my music again.
    Ross-

  • Nomad Zen Softw

    I was wondering. See, i have this problem. I have over 3,000 songs on my Nomad Zen Xtra. When i set it on Shuffle, it seems like it repeats certain tracks much more often than other. I was wondering if there's a way to fix that. though updated software or 3rd party software or just simple setting that i missed somewhere.
    Any input would be much appreciated.
    Kasdeya

    The shuffle memory is actually quite limited, perhaps even as low as a hundred tracks or so. Hence after this number of tracks have played you may well get repeats.
    Also the random seed, the clock, is not all that random in what it generates.
    You can try clearing the queue, changing the play mode, queuing the tracks again, then changing the play mode back to shuffle to see if that hel
    ps.
    The shareware Notmad Explorer has a playlist randomise feature.

  • No sound Nomad Zen Xtra 30

    Hi,
    I just bought a Nomad Zen Xtra 30gb. It has the most recent firmware upgrade from the creative website too.
    The device is absolutely brand new and came in a fully sealed packet.
    The problem is that even though my MP3 player appears to do everything it's supposed to do on the screen, and even appears to play transferred tracks, I'm getting absolutely no sound from the ear phones.
    Now I checked the ear phones on another device and they are absolutely fine.
    The weird thing is that the software that comes with the zen xtra plays files on my hard dri've fine, and appears to play music from the MP3 player. However no sound is produced then either.
    Please help, this is driving me mad as I can find no hint of a solution anywhere, and no one seems to report a similar problem.

    All you can try is the recovery procedure in the FAQ post. If this doesn't revi've sound the player is faulty.

  • Is it possible to replace a rechargeable battery of Nomad ZEN Ver. USB

    Hi,
    is there a possibility to change the build in battery for a Nomad ZEN Ver 2.0 USB
    Does any one know where i CAN (BUY ONE)
    tHANKS
    zENGIG

    You can try Googling for sources, although I noticed yesterday that all the Touch battery sources seem to have gone.
    In theory Creative have a battery replacement service, so check with support.

  • Nomad Zen Jukebox dead battery - where to get fixed in Phoen

    I have had a Nomad Zen Jukebox for several years. Sadly, after I got another player, I let this one sit for several months and now the Li-ion battery is dead. It's one of those 3.6 v batteries soldered onto the mainboard.
    I li've in Phoenix. Anyone know where I can get the battery replaced locally? How about mail-in service?
    Thanks for any assistance.
    laeva65
    Phoenix, AZ

    You should be aware that there are signifficant changes with upgrading ( or more apropiatly) changing your firmware version from one starting with a point somehting to a two point somehting firmware, and i would only advise you do it if you realy need to ( ie you need it to work on a windows Vista P.C)
    there is a .30.somehting firmware for that player somewhere ( i think) that shouldnt be such a huge change.
    goign to a 2.something firmware will:
    make the Zen Xtra an MTP device that you can drag n drop stuff to, and it will also help intergrate it with other programmes such as widnows media player on p.cs that dont have the drivers ( i think)?
    during the update process ( if it doesnt brick your Zen) everything on you hard dik will be completly wiped, all mucis, playlists and anny other files that you have stored on your player.
    ?As? with all firmware updates you should make sure that the battery is fully charged and the player is conected to the mains charger.
    Updating toa ver2.something firmware is only possible on a windopws XP machine, and that XP P.C must be checked to make sure its is free from windows media player and windows media player runtim, you need to go to the control panel and select remove? on WMP then roll it back to windows media player 0, re-boot your XP p.c, then go back to add/remove programmes, remove Windows media player runtime ( roll back to windows media player ) re-boot your p.c then with a bit of luck the firmware will uipdate to the latest version.
    In my opinion unless you realy want the Zen to act as an MTP device, and work on windows vista, theres not much to differentiate between the last ver firmware and the last ver2 firmware, read t6he link below ( if it still woks) and you should get an idea of the hassle i had when trying, then failing ( and eventualy suceeding) in updating the firmware on my Zen Xtra.

  • Does the creative Zen vision play itunes video?

    Does the creative Zen vision play itunes video?
    http://www.creative.com/products/product.asp?category=210&subcategory=211&produc t=12985
    Thanks

    i highly doubt it
    Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote   Windows XP   <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

  • 320 gigabyte Harddisk is out in IDE 2,5 can I use it on a Nomad zen xtra??

    Hi everbody
    320 gigabyte Harddisk is out in ide 2,5 can I use it on a Nomad zen xtra?
    Or is it limitated to the ID Tags?
    In my old player Zen usb 2.0 I work with a 60 Gig but it recognised only 3 Gig with this 3 it works fine. :womanvery-happy:
    I have the Firmware Version "ZenXtraP4SAudible_PCFW_LB_2_0_03.exe" on the unit Zen Xtra.
    Thanx
    Zengig

    N?
    Thank you so much for your answer.
    I like the old Nomad Zen especially? the sound is fantastic compared with the mass brand I pod.
    The cheap plasic haptik or marketing manipulation (WE apple user are a family) is a betray to us IMHO.
    Thank you ?<a target="_self" rel="nofollow" href=". . . . . user/viewprofilepage/user-id/32067">coachop94[/url]

  • Nomad Zen Xtra prob

    Well, I just emailed support again but overlooked the (faster?) forums until now. Maybe someone can help me out... ------- EMAIL SENT -------- Hi, I emailed the customer support a while ago and got a generic reply as how to reset my mp3 player's OS. *This is not a software problem, it is a hardware problem... I want to send my Nomad Zen Xtra in to Creative to get it fixed and I will pay for the repairs.* Here is an original copy of the message: Hello, about a year ago I purchased my Creative Nomad Zen Xtra. Only a couple months into using it, I dropped the MP3 player on the headphone jack where my headphones were plugged in and the sound stopped working correctly. I think maybe that the soldering that is keeping the headphone jack on the circuit board is messed up or disconnected. Some sound does come out of one earphone when I wiggle the plug around a bit. How much do you think this would cost me? The player is no longer under its one year warranty, either. Thanks in advance. - Steve ----- Originally answered by Technical Support, Creative Labs Americas ----- Thanks, Steve-oMessage Edited by Jeremy-CL on 0-2-2005 0:08 AM

    <EM>I?ve posted it before, but here we go again</EM>:
    Two or three months after buying my 40GB zen xtra, the same thing happened to me. I deduced it was a battery problem and prepared myself to expand U$29 on a new one (I li've in Rio and it would be impossible for me to send it back for warranty). While I was looking for the new battery, I kept using it in my job and at home, with the power cord hooked up. I did it some times and one day, without any apearent reason, it started to charge the battery and ever since it never happened again. I friend of mine mentioned that these Li-Ion batteries can have this kind of problem. By that time, he suggested some charging manouveres to recover it but it was no needed. What I suggest you is to keep trying to charge it. You may be as lucky as me!

  • NOMAD ZEN XTRA 30GB & WINDOWS VISTA & D/L SOFTWARE ISS

    I was hoping someone can please help me out here in Forum Land ?I just bought a new computer with WINDOWS VISTA and my Installation disk is not compatible. I have tried d/l from this site with no luck. It will go to the WIZARD part but won't finish the installation. I need to get the Software on my new puter for my NOMAD ZEN XTRA 30GB MP3 Player.Namely I guess the Creative MediaSource and it's amazing Organizer.Any links or steps in how too would be most appreciated I have emailed the Creative team but I keep get stuck at what to do next. They said something about installing and completing the firmware update, your player will be using the PlaysForSure software, but on the same sentence he/she says "However you will need to do this on an XP system".. and I have Vista so I am totally confused. I also checked out the site he/she suggested about installing this FirmWare and that site says "Back up all audio, video, image or data files stored in the player to a secure location before changing the firmware. All contents in the player will be lost when you install a new firmware"? -- How can I back up when I can't access it's And surely, I don't want to lose my over 2,500 songs ! Yikes... This was under <span class="majorheader">Solution ID # 4789?I am hoping I can get your help out there as I dearly love my MP3 player and want to continue importing songs ?thank you in advance for any advice you can offer me ?cheers Lisa

    Hey Lissa,Did you find any solution in your problem because i have the same problem and i dont know what to do.Plz let me know if u downloaded any thing in your Vista Computer. Thanks alotSuzy

  • Problems downloading between Nomad Zen Xtra 40GB and PC (XP S

    Help please
    I've a new Zen Xtra and have installed all the software that came with it and then reinstalled as per the instructions given in another post.
    I can see no sign of the drivers under the device driver although, not always, the PC pops up a message saying 'do i want to organise'. I can see my Nomad files in Nomad Explorer and Windows Explorer. i can even, sometimes, after each software reinstallation, even transfer a few, about 0 to 20, files before i get an error message telling me thw player is busy or disconnected. I have left the connection in place overnight but still no celarance.
    Any ideas as I really feel like throwing the bloody thing out the window!
    Thanks
    Mark

    Guys
    Thanks for your responses. Sorry I haven't got back - been away a few days.
    Situation is this.
    new Nomad Zen Extra and Dell 3000 running XP SP2 52mb ram 40gb dri've.
    Loaded software with Nomad and unable to sync or transfer. PC could 'see' nomad and read preloaded files but when any form of transfer tried I either got 'device not connected' or, occasionally, a few files would transfer before 'hanging'. Erroe message stated'device busy or not connected'.
    Since then I have followed these instructions given in another reply on this forum to the letter.
    <SPAN>Here is a step by step of what I would do to try to get back to square one and get MediaSource and the Driver installed.
    <SPAN>
    <SPAN>) Disable any antivirus and background programs on your system and disconnect the Jukebox from USB
    <SPAN>2) Go to control panel/add remove programs and remove both Mediasource and the Jukebox Driver
    <SPAN>3) Reboot
    <SPAN>4) Ensure AV and BG programs are still disabled
    <SPAN>5) Search for any updated Chipset drivers for your motherboard (if you need help with this tell me your computer Mft. or your motherboard mft. and I will find out what you will need) and install them.
    <SPAN>6) Reboot
    <SPAN>7) Repeat step 5
    <SPAN>8) Go to www.nomadworld.com and go to downloads/drivers and applications. Select the Jukebox Zen USB 2.0 and your version of Windows. Click get files. Download four files:
    <SPAN>Jukebox Driver version .26.02<SPAN></LI>
    <SPAN>Creative MediaSource Software Update version 2.03.29<SPAN></LI>
    <SPAN>NOMAD JukeBox Type 2 Version .0.03 (English) Web Release<SPAN></LI>
    <SPAN>Creative NOMAD Explorer (Version 3.0.0)<SPAN></LI>
    <SPAN>9) While these are downloading, go into rescue mode on the player and run a cleanup. A reload OS will hopefully not be needed.
    <SPAN>0) Install the files in the above order. You will plug the Jukebox Zen in at the end of the driver install to complete the install. Leave it connected all the way through the remaining ste
    ps.
    Disconnect after the last file is installed.
    <SPAN>0) Reboot, reconnect the player and test.
    <SPAN>Jeremy"
    <SPAN>So I think of all the up-to-date firmware etc...
    <SPAN>I've also loaded and installed WMP 0 - which can also see the Nomad and has transferred a few files before hanging as above...
    <SPAN>I can also see the driver in my device drivers under usb controllers. the driver listed is Creative Labs .26.2.0
    <SPAN>I have managed to transfer my tracks (3500+) to the Nomad by burning as MP3 cd's and loading through my works laptop (Win2000). I used the Creative Media Source on the original software which came with the Nomad to do this. This is not a great solution as my company aren't thrilled about such use of their lappies and it only has a 0gb hd and, therefore, doesn't / can't hold my music library.
    <SPAN>I really want to get it working properly on my main PC so I can get the max from the Nomad.
    <SPAN>Any ideas?
    <SPAN>Sorry this is a bit long...
    <SPAN>Mark
    <SPAN>
    <SPAN>
    <SPAN>
    <SPAN>
    <SPAN>

Maybe you are looking for

  • Issue with union all in sql

    Hi All, I have a requirement as below. SELECT 'A' AS 'XXX' FROM DUAL UNION ALL SELECT 'B' AS 'XXX' FROM DUAL I need to check in such a way in my second sql query if 'B'='A' then i need to print 'A' else 'B' , means in my second query i need to compar

  • Ipod wont fully sync

    sorry i am posting this twice, i didnt realized i posted it in the windows section, sorry once again i am new to this.. So! i have a 5th generation 30GB ipod, and i have had no problems syncing it until this past week. When i plug my iPod in and clic

  • BDC issues in FB60 while posting through proxy

    Hi All, I have created a BDC for FB 60 & FB65. Now, the requirement is that Data will come from XI as inbound proxy and the code will get executed. XI sends a separate file for each record. That is if 10 documents are to be created from FB 60 , then

  • Setting a minimum height for a dyanmic subform

    I am creating a form that is reading in a set of instructions from XML. I would like to limit the instructions to 2 per page. Is there a way I can set a minimum height for the subform, so it will at least be 1/2 the page?

  • Macbook bad DVD drive how to install windows in bootcamp

    My macbook has a bad DVD drive. I just upgraded it to snow leopard and want to install windows using bootcamp. Unfortunately when the windows installation starts the machine reboots but does not seem to be able to detect the windows disc in an extern