Nomad Zen Touch & Windows Vi

Since I installed Windows Vista some odd weeks ago, my nomad zen touch has never acted normally when docked. I typically can't even load up more than a couple songs before everything freezes up. When I dock it, Windows appears to be trying to launch Windows Media Player, which itself crashes. I've tried using the Creative Media Center as well as Nomad Explorer and have no luck. I've tried reinstalling the firmware(version .0.03) as well as the drivers and to no avail.
Is there anything I can do to get my zen touch to work with Windows Vista? It'd be a **bleep** shame if I have to throw it away and go out and buy an Ipod now.

From what I've heard, doesn't that wipe your player clean of all files? I have probably 3,000 songs on mine, I'd hate to have reinstall them all again.
Is that your only choice for getting Vista compatibility? Also, when you say it has nati've compatibility with Vista, what about playlist? Because only the creative media center seems to let you create and edit playlist from my experience. Playlists are key for me.

Similar Messages

Creative zen touch & windows vista 32 bit

Can anyone tell me which Firmware or software I need to install so that I can get my mp3 player working again. Have Windows Vista 32 bit, and Creative Zen Touch with about 5 gigs worth of music on, which is now stuck on it. Any help would be appreciated.

I'm in the same boat as you. I have a zen neeon. Tried running the program, all the set up prompts seem to work, but the program is nowhere to be found after "installation".
I don't want to have to buy another player, seeing this one has 200 songs in it. (which is nothing compared to your 5 gigs!Would be a real pain in the ar$e.

Firmware Problem on my zen touch....PLEASE HELP ME

Hi, I have had my zen touch for over a year now, works great. Recently I tried to up grade the firmware to ZenTouchP4S_PCFW_LB_2__0.exe While installing it erased the whole music plus the previous firmware. So when installing it froze an now my player starts in recovery mode an its in v0.0.0. When I try to upload the new firmware it tells me to connect my player, but its already connected. Nothing wrong with my usb cord so I am lost, can anyone help me resolve this problem so I can listen to my music again.....thanks.

I finally got it. I had to uninstall and reinstall the zen touch, windows 0, an the media source from the installation disc. After that when i plugged the player in it stayed in the recovery mode, before it would say docked an have that lil music note screen on. So i went to device manager on my comp an looked up the zen touch, it said error code 0. I followed the on screen instructions from my comp. It said to right click an uninstall then go to add hardware, an it searched for devices plugged in an BAM! A lil screen poopped up an said zen touch player detected......So i hurried an installed the new firmware an everything is ok now. So anyone havin the same problem follow these somewhat clear instructions. Thanks.

Zen Touch not detected by Windows Explorer though recognised by Windows Media Pla

I wonder if anyone else has had a similar problem to this:
I am running Windows ME and my son has just received the player for his birthday.</LI>
Unfortunately the CD that came with the player caused this computer (and another) to lock-up so faulty CD assumed.</LI>
Loaded drivers from internet.</LI>
Camera and memory sticks all recognised by Windows Explorer but NOT the Zen Touch.</LI>
Now the surprise the Zen Touch IS recognised by Windows Media Player and my son can transfer files using that - but it is a VERY slow way of loading files and we would much prefer to use Windows Explorer.</LI>
Anyone any suggestions as to how to make Windows Explorer detect the Zen Touch?

The Touch is only recognised through Windows Explorer by virtue of installing Nomad Explorer.
Certainly make sure you have the latest version of this from the downloads page, you mentioned you have the latest drivers already.

Windows XP driver problem - Nomad Zen Xtra and Zen To

I have both a Nomad Zen Xtra 60GB and a Zen Touch 20GB, both of which were working fine with my Windows XP Pro SP2 computer until a couple of days ago. I had recently put firmware 2.0.03 onto the Zen Xtra, and was using the drag-and-drop method in Windows Explorer to copy loads of albums across to it from my music folder. It seems I might have tried to copy too much over at one go, because eventually the file copying just stopped, and I had to unplug the Zen Xtra from the PC to abandon the copy process. Since then, neither Zen device has been properly recognised by any of my PCs. When I plug the Zen Xtra into?a USB port, Windows brings up the messages: "Found new hardware: Nomad Jukebox Zen Xtra" and "Found new hardware: MTP device", then brings up the Found New Hardware Wizard, even though firmware 2.0.03 is supposed to provide "seamless support with any computer running Microsoft? Windows Media? Player 0 and Windows? XP - no drivers or software needed" (I have WMP0.00.00.4036 installed). The Zen Xtra's display does not show the "docked" icon except when plugged into my laptop (running XP Home Edition)... but even on the laptop Windows still asks for a driver, which it then fails to install properly. When I plug my Zen Touch into my PC, it detects that an MTP device has been connected, but Windows Media Player doesn't list it under the Sync tab, and when I try to install the "Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players", the installer complains that "Setup could not detect any portable device on your system... please ensure that Zen Touch PlaysForSure Firmware is properly installed". The device's firmware version is 2..0, and as I have already said, both this and the Zen Xtra were working fine with my PC up until a couple of days ago. Additionally, the "docked" icon?no longer appears?on the Zen Touch's display when plugged into the PC. I have made the registry change suggested in Creative Knowledge Base Solution ID #9287, and my PC is up-to-date with Windows Hotfixes. I've also tried uninstalling all Creative programs and reinstalling them one at a time, but I can not get my PC to correctly work with the Zen devices anymore. Any suggestions? Also, is there some kind of Factory Reset that I can do to get my Zen Xtra back to an earlier firmware?

I had the same issue. My battery ran down during a sync, then I was unable to sync again.
The Zen is showing up fine in the device manager, but none of the software (Media Player, MediaSource) sees it.
Finally, after a day of trying new drivers, running cleanup, etc. I decided to go into the Zen's recovery menu. To get there, press and hold the Play button and press and hold the reset (use a paperclip) button while powering up.
Once there, select the first option in the menu to Clean up the system. I forgot what it's called and I'm in the middle of a sync now, so can't look.
Worked fine after that. Phew!
If your device is being detected fine, but cannot sync, try that and post here if it fixes it.
Tooner
evokefrank.googlepages.com

How to get Zen Touch to work on Windows Vista without PFS (worked!)

CHow to get Zen Touch to work on Windows Vista without PFS (worked!)? ***THIS WORKED***
For all of you that want to get their music out of the Zen touch, and are stuck with Vista and .0.03 firmware (non vista recognisable), and don't want to erase everything by installing the latest firmware, here is what worked for me:
)Uninstall every piece of Touch software you got and reboot.
2) Download the latest drivers from Creative: JB3MV2...exe, together with the latest Nomad explorer, and the latest Notmad explorer from Red Chair (a trial is enough, version 9.0.3 currently).
3) Right click the driver, properties, go to compatibility mode, and select Windows XP SP2. Make sure your Zen is unplugged (worked for me that way). Right click the driver installer again and Run as Administrator. It hanged around 72% for me, no biggy, open your task manager and shut the installer off.
4)Before rebooting, install Notmad explorer.(I installed only the Zen touch part of it. I tried to run it right away but got a 'cannot find explorer.exe error - again, no biggy).
5) Reboot, plug in your Zen. Again for me, Notmad didn't work. This is what worked: Without messing up anything, install Nomad Explorer by Creative on top of it all, and reboot again.
6) After reboot, with your Zen still plugged in, right click the little Notmad icon on the right part of the taskbar and select 'Connect Jukebox Zen'. And voila, check your explorer, it should hopefully recognise the Zen Touch like windows xp would.
If you still run into trouble, just install stuff from the beggining, making sure Compatibility: WinXP SP2 and Run as Admin are used everywhere, and keep rebooting till it hopefully works.
Best of luck. edit: Using Winamp to transfer files worked as well.

Hi D2xS-Shooter,
I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
Creative Cloud is a collection of apps with various different tech specs
http://www.adobe.com/uk/products/creativecloud/tech-specs.html
Thanks!
Eshant

Nomad explorer and creative mediasource not detecting zen touch player. PLEASE HE

Hi, I got a new pc and I was going to install my Zen Touch mp3 player on my new pc but I could'nt find the installation cd so I followed the instructions on here and downloaded all the necessary? software, drivers, plug ins, and followed all the instructions. Once everything was downloaded and installed I plugged my mp3 player into my pc and the noise it makes came up and mtp media player pop up appeared. Windows media player accepts that my zen touch is plugged in but creative media source and nomad explorer is not detecting it's?My os is windows xp, I am using windows media player 9 as I was having trouble with windows media player . Could someone please help me? Any help would be greatly appreciated. Thanks

If you've just upgraded to XP, you now have to upgrade your Zen as well as your Mediasource. First you've got to upgrade your Zen Touch firmware to version 2.0.05 or above. Look around on the Creative Support site and you'll find the download without too much trouble. Be warned that the firmware upgrade is permanent, and it will wipe out your Zen hard dri've contents, so say goodbye to all your music unless you want to back it all up to your PC first.
Then you've got to upgrade your Mediasource to v 3.30.2 or higher. Again, you can find the upgrade download on the Creative site. Then you've got to install Zen Touch Media Explorer v .30.04 or higher. Same thing -- easy to locate on the Creative site. Then you should be good to go!?Best,?John

Zen Touch No Longer Recognized By Windows Media Pla

My Zen Touch stopping being recognized by Windows Media Player today. I still see the MTP connected icon in the task tray and I still it listed without a warning in Device Manager, but WMP doesn?t recognized that it is attached. I?ve tried different USB ports and a different USB cable. There are no errors in the application log. I reformatting my device and run the cleanup option, but I still can't WMP to see the device. The only changes I can think of is installing IE7 Beta 2 and installing MusicMatch. I?ve since uninstalled MusicMatch, but I still have the problem. Does anyone have any suggestions? Or there a way I can increase the logging so I can get a better idea of what might be failing.

Hi Ted
I deleted the file and reconnected my device and it quickly grew to 600kb. I'm not sure exactly what you need and there didn't seem to be anything interesting at the end of the log, but I did find the following lines which, from what I can, is from the point when WMP tried to establish a connection with the device and failed.
WPD: 740.544 003 0 0 [WpdMtpDr.dll] ENTERING: Wdf_EvtIoDeviceControlWPD: 740.544 003 0 [WpdMtpDr.dll] Wdf_EvtIoDeviceControl, Wdf_EvtIoDeviceControl: IoControlCode: '0x32504D57'WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, HandleIoControl failed : hr = 0x80070032, 'The request is not supported. 'WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, Completing WDF request with status -07374823WPD: 740.544 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, WdfRequestComplete failed: c000000WPD: 740.544 003 0 0 [WpdMtpDr.dll] EXITING: Wdf_EvtIoDeviceControlWPD: 5688.336 0843 0 2 [wpdsp.dll] ERROR: IoControlHelper, WdfDeviceIoControl failed, hr = 0xd000000WPD: 5688.336 0843 0 [wpdsp.dll] EXITING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ERROR: CWPDDevice:eviceIoControl, DeviceIoControl failedWPD: 5688.336 0843 0 0 [wpdsp.dll] EXITING: CWPDDevice:eviceIoControlopcode = 32504d57, lpInBuffer = 0344E458, nInBufferSize = 4, lpOutBuffer = 0349540, pnOutBufferSize = 0344E460WPD: 5688.336 0843 0 0 [wpdsp.dll] ENTERING: CWPDDevice:eviceIoControlopcode = 32504d57, lpInBuffer = 0344E458, nInBufferSize = 4, lpOutBuffer = 0349540, pnOutBufferSize = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ENTERING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 740.424 003 0 0 [WpdMtpDr.dll] ENTERING: Wdf_EvtIoDeviceControlWPD: 740.424 003 0 [WpdMtpDr.dll] Wdf_EvtIoDeviceControl, Wdf_EvtIoDeviceControl: IoControlCode: '0x32504D57'WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, HandleIoControl failed : hr = 0x80070032, 'The request is not supported. 'WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, Completing WDF request with status -07374823WPD: 740.424 003 0 [WpdMtpDr.dll] ERROR: Wdf_EvtIoDeviceControl, WdfRequestComplete failed: c000000WPD: 740.424 003 0 0 [WpdMtpDr.dll] EXITING: Wdf_EvtIoDeviceControlWPD: 5688.336 0843 0 2 [wpdsp.dll] ERROR: IoControlHelper, WdfDeviceIoControl failed, hr = 0xd000000WPD: 5688.336 0843 0 [wpdsp.dll] EXITING: IoControlHelperpCtx = 009AFF0, opcode = 32504d57, inputBuffer = 0344E458, bytesToWrite = 4, outputBuffer = 0349540, bytesToRead = 4, bytesRead = 0344E460WPD: 5688.336 0843 0 [wpdsp.dll] ERROR: CWPDDevice:eviceIoControl, DeviceIoControl failed
Message Edited by winterminute on 02-08-2006 07:25 AM

Creative Zen Touch 20GB - Windows Vista

(Creative Zen Touch 20GB - Windows Vista6 Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob

Pob wrote:
Hi folks,
My old computer running XP recently gave up on me and I now have a new computer using Vista.
I have lost the cd I got with my Zen Touch as it was over 5 years ago now but it still works perfectly!
I want to set up Creative Media Player on Vista so I can start transferring music again but I have heard that if I download the firmwear I will lose all the songs that are currently stored. I really don't want this to happen as most of my music was contained on my old PC and it will be very hard to locate it all again so if there was a way I could just set up Creative Media Player the same way I had it before, without losing all my current music, that would be great!
Any help much appreciated.
Thanks,
Pob
This should get you going? http://mrinternet.wordpress.com/2007...ether-finally/

Zen Touch not being recognized by Windows

Yesterday, I recieved a Zen Touch (20GB) as an early Christmas present. I excitedly opened it, eager to put my songs on it. After installing what was on the CD, I plugged in the player only to be greated by a Windows error message.
The initial error: http://img363.imageshack.us/img363/6099/errorxu.jpg
I decide to click it to see what the problem is, then I'm greeted by the following
Second: http://img59.imageshack.us/img59/9995/error29qj.jpg
Please help me.

Try downloading and installing the latest drivers, Creative Zen and Jukebox Driver Upgrade version .30.03.
Also try running a disk cleanup from rescue mode.

New Zen Touch not being detected by Windows

I just bought a 20 gig Zen Touch off ebay, and tried to get it to run.
The firmware on the Zen tells me it's version 2..0, which is the PlaysForSure version. So, I downloaded the driver specific to PlaysForSure, and tried to run it. It looked like it installed just fine, but when I plug in the player, it just recognizes it (at the start) as Creative Zen Touch, and opens up the Found New Hardware wizard. So, I don't think it recognizes my Zen.
This, of course, leads to all the programs not being able to recognize my Zen, either, and to me not being able to reload the firmware (just in case), or anything of the sort. Not really sure how to proceed, and I've been scanning the help files, which have been no help. The knowledge database seems to suggest that Windows XP will just load the proper drivers, which, of course, it doesn't.
How do I proceed? I thought this would be the answer, but it presumes that Windows will detect the device as an MTP, and somehow just find the right driver, which it doesn't.
I'm at a bit of a loss as to where I go from here. The drivers aren't installing, and the closest I can get is my Device Manager showing the Creative Zen with a big yellow question mark next to it, because the drivers aren't installed properly.
Help?

Try downloading and installing the latest drivers, Creative Zen and Jukebox Driver Upgrade version .30.03.
Also try running a disk cleanup from rescue mode.

(Zen touch) Is there a way to do a file count for Nomad Explor

Hi. I just got my Zen Touch. It rocks, but I was wondering if there's a way to count how many files are actually in the NOMAD Explorer. Can anyone help? Thanks.

I'm sure my NJB3 tells me somewhere. Is there a place you can view the firmware version? I'm thinking it's around there somewhere, if it hasn't been removed from the Touch. I know that Notmad Explorer gives very clear details.
To save the tracks as a playlist, just queue them all up then hit the scroller and choose "save as playlist". Of course you can do a similar thing in the software by creating a playlist and then copying the tracks into it.

Zen Touch Causing Freeze Up in Windows

Having trouble with Windows Media Player or Creative Media Center freezing up when attempting synching with Zen Touch.
Have all latest firmware updates (.0.03) and all latest XP updates, including SP2
When attempting synch, the application freezes up. When I go to Windows Task Manager I see that CPU usage is at 00% and under the Processes tab the "CTPdeSrv.exe" file is hogging between 95 and 99 percent of processor resources.
By terminating the process, CPU usage goes way back down to single digits usage. But then I cant use the application(s).
Anyone else experiencing this problem? If so do you know a fix?
AJA629

I know the sync process can be very slow. You ought to make sure you have the latest version of MediaSource as Audiosync does seem to be a little bugged.
Have you tried using the freeware?Nomadsync or the shareware?Notmad Explorer instead?

NOMAD ZEN XTRA 30GB & WINDOWS VISTA & D/L SOFTWARE ISS

I was hoping someone can please help me out here in Forum Land ?I just bought a new computer with WINDOWS VISTA and my Installation disk is not compatible. I have tried d/l from this site with no luck. It will go to the WIZARD part but won't finish the installation. I need to get the Software on my new puter for my NOMAD ZEN XTRA 30GB MP3 Player.Namely I guess the Creative MediaSource and it's amazing Organizer.Any links or steps in how too would be most appreciated I have emailed the Creative team but I keep get stuck at what to do next. They said something about installing and completing the firmware update, your player will be using the PlaysForSure software, but on the same sentence he/she says "However you will need to do this on an XP system".. and I have Vista so I am totally confused. I also checked out the site he/she suggested about installing this FirmWare and that site says "Back up all audio, video, image or data files stored in the player to a secure location before changing the firmware. All contents in the player will be lost when you install a new firmware"? -- How can I back up when I can't access it's And surely, I don't want to lose my over 2,500 songs ! Yikes... This was under Solution ID # 4789?I am hoping I can get your help out there as I dearly love my MP3 player and want to continue importing songs ?thank you in advance for any advice you can offer me ?cheers Lisa

Hey Lissa,Did you find any solution in your problem because i have the same problem and i dont know what to do.Plz let me know if u downloaded any thing in your Vista Computer. Thanks alotSuzy

Nomad Zen Xtra using Windows 98 (Not 98

Good day,
I thought I'd share this information since I couldn't find anything about it during the past few weeks when I was looking.
I decided to leap into the MP3 world and after much research concluded the Jukebox 3 was the player for me, only to find out it was no longer manufactured! So I continued my hunt and decided on a Nomad Zen Xtra 30GB unit.
The only problem is it says it needs Windows 98SE and I unfortunately am still running 98 (laugh if you must). So when I got the unit I thought I might as well try and see if it works before going through all the hassle of upgrading an operating system.
It works! I was able to install the CD and update the new drivers, firmware and Nomad Explorer files off of Creative Downloads. The only thing that does not work is Creative MediaSource/Organizer software. This isn't too big a deal from what I can see as it is the MP3 ripper. I downloaded a freeware program called CDex (which is great by the way) and I rip all my CD's using this then use NOMAD Explorer to load it on the dri've. FYI, I also had to download the latest Adaptec APSI driver as well so CDex would work.
Nomad Explorer can also set-up the playlists although I understand it is somewhat easier using the Creative software. I am not sure if I am missing any other big features but it seems to be doing everything I want of it and I love it.
Anyhow, I'm about 8GB into it and all is working very well and I am happy that I didn't have to spend hours on a operating system upgrade.
Hope this helps someone!Paul

I have a Zen Xtra 40GB and I'm using Windows 98SE and I have not been able to get things to work. I tried using the installation disk and it could not complete the install....it would hang up at the point where the drivers were being loaded. After some playing around I got the drivers installed, but Nomad Explorer did not see that the MP3 player was connected. I also tried MediaSource (it loaded on just fine) and it recognized the player, but would crash when the program tried to "read" from the player. I plan to return the player and get my money back.

Nomad Zen Touch & Windows Vi

Similar Messages

Maybe you are looking for