Nomad Zen Xtra Connection prob

I recently upgraded from 2000 Pro to XP Pro and have struggled with connectivity since. I cannot view the Zen xtra as a hard disc in the 'my computer' function. It connects fine with Media Organizer, but I can't view it as an external dri've. This worked fine in 2000. Any thoughts or recommendations would be appreciated.

I was unaware that the Zen Xtra could be viewed as a hard dri've on any OS. It certainly cannot be viewed that way on Windows XP.

Similar Messages

Nomad Jukebox Zen Xtra connection prob

I already tried searcing the forums, And I didn't come across anything like this, And anything I came across that was similar I did as was suggested and it didn't help. anyways, onto the problem...:
I'm using Windows XP by the way.
I just got a new Zen Xtra a few days ago because I had to return my first one because the harddri've crashed, so I took this one home, loaded my music onto it and it was fine. Today I went to load more music onto it and my computer started lagging really badly, I use Realplayer to put my music onto the player and when I clicked into it, It would freeze as it was starting and I'd have to kill the program.
Then I tried going into My Computer to go into the Nomad explorer, Except my computer took about 5 minutes to find itself, And then it only found 'Desktop' and 'My Computer' which, 'My Computer' had nothing in it. So I went into desktop and that fixed the problem with the harddri'ves showing up, Except once I get into Nomad Explorer it says my player isn't connected.
I (physically) disconnected and reconnected my player while in Nomad Exploer but it's still a no-go.
I cleaned up the disk on my player and rebooted it, I used a different cable and tried all my USB ports. What do you suggest I do?
I really need some help and if it doesn't get fixed I'm not getting another replacement, I'll have to get a different brand.Message Edited by spring90 on 08-07-2006 04:43 PM

Ok... I think I figured it out. I finally got into the recovery mode. I let the battery sit out of the mp3 player for a while, hoping that there is a capacitor that would run out of power. I put the battery back in and got into recovery mode. I ran disk clean up. Nothing changed. I had the same problem I first started off with. So I took the battery out again for an hour. Came back, and got back into recovery mode. I reinstalled the OS. Everything seems to be working fine.
I hope that anyone having a similar problem with this mp3 player can keep this in the back of their mind if they cannot get into recovery mode due to a boot up and shut down problem.
-Matt

40gb Nomad Zen Xtra charging prob

When I've tried to charge it lately the battery icon doesnt appear, a little power cable icon appears instead, after a few moments it goes away and the player turns off, any ideas anyone??

Rulke: Take a look at the advice here in the Zen FAQ at Nomadness.net.

Nomad Zen Xtra Static prob

Hello,
This is my first post to this forum. I?m hoping someone knows any reason/fix for my problem.
I bought my player last March at CompUSA. For the first months it has worked like a charm, but ever since 2 months ago, it started giving some static issues. Music will play fine for a while and then all of a sudden you start hearing some static. If you turn it off and on again, it will disappear and then be back again. At first I thought: "Well, it's only happening like once a day. I can li've with that." But now, It's happening too often. I also noticed it will happen a lot faster when I skip through tracks (one thing I do a lot).
Also, my brother has the same model and the same firmware. When I commented to him about having the issue, he told me the turn off, and then on, thing. Thus, my device is not the only one with the problem.
Am I the only one having the issue around here? Are there any known solutions?
I read a review at amazon.com where the guy stated he had the same problem also.
Looking forward to any input.
I'd have written to Creative Support first. But last time I wrote (My song were disappearing from the song lists, but still taking up space), they wrote twice back telling me to Reset, Format, Clean-up, etc. That didn't help at all, and if it wasnt for the nice lady at CompUSA, I'd still have a defecti've unit.

I got a bit of pretty quiet static now and then for a few hours before mine died.
Considering that you got it back in March, your 90-day labor warranty is gone, but you still have months left on the parts warranty. (That is, if you're in the US. I think Europe has year parts and labor.) If you have to send it in, you first need to get a RMA code from tech support. And assuming you're in the US, you'll have to pay a $25 "diagnostic fee," but that's likely the only labor fee you'll pay because they usually seem to diagnose it as "broken" and send a replacement.
Because you have a while left, I'd recommend keeping it, trying a reformat, see if it gets worse, etc. Definately do a full backup of your music from it very soon, as there's no way to get anything back off it if it dies.

Nomad Zen Xtra prob

Well, I just emailed support again but overlooked the (faster?) forums until now. Maybe someone can help me out... ------- EMAIL SENT -------- Hi, I emailed the customer support a while ago and got a generic reply as how to reset my mp3 player's OS. *This is not a software problem, it is a hardware problem... I want to send my Nomad Zen Xtra in to Creative to get it fixed and I will pay for the repairs.* Here is an original copy of the message: Hello, about a year ago I purchased my Creative Nomad Zen Xtra. Only a couple months into using it, I dropped the MP3 player on the headphone jack where my headphones were plugged in and the sound stopped working correctly. I think maybe that the soldering that is keeping the headphone jack on the circuit board is messed up or disconnected. Some sound does come out of one earphone when I wiggle the plug around a bit. How much do you think this would cost me? The player is no longer under its one year warranty, either. Thanks in advance. - Steve ----- Originally answered by Technical Support, Creative Labs Americas ----- Thanks, Steve-oMessage Edited by Jeremy-CL on 0-2-2005 0:08 AM

I?ve posted it before, but here we go again:
Two or three months after buying my 40GB zen xtra, the same thing happened to me. I deduced it was a battery problem and prepared myself to expand U$29 on a new one (I li've in Rio and it would be impossible for me to send it back for warranty). While I was looking for the new battery, I kept using it in my job and at home, with the power cord hooked up. I did it some times and one day, without any apearent reason, it started to charge the battery and ever since it never happened again. I friend of mine mentioned that these Li-Ion batteries can have this kind of problem. By that time, he suggested some charging manouveres to recover it but it was no needed. What I suggest you is to keep trying to charge it. You may be as lucky as me!

Windows XP driver problem - Nomad Zen Xtra and Zen To

I have both a Nomad Zen Xtra 60GB and a Zen Touch 20GB, both of which were working fine with my Windows XP Pro SP2 computer until a couple of days ago. I had recently put firmware 2.0.03 onto the Zen Xtra, and was using the drag-and-drop method in Windows Explorer to copy loads of albums across to it from my music folder. It seems I might have tried to copy too much over at one go, because eventually the file copying just stopped, and I had to unplug the Zen Xtra from the PC to abandon the copy process. Since then, neither Zen device has been properly recognised by any of my PCs. When I plug the Zen Xtra into?a USB port, Windows brings up the messages: "Found new hardware: Nomad Jukebox Zen Xtra" and "Found new hardware: MTP device", then brings up the Found New Hardware Wizard, even though firmware 2.0.03 is supposed to provide "seamless support with any computer running Microsoft? Windows Media? Player 0 and Windows? XP - no drivers or software needed" (I have WMP0.00.00.4036 installed). The Zen Xtra's display does not show the "docked" icon except when plugged into my laptop (running XP Home Edition)... but even on the laptop Windows still asks for a driver, which it then fails to install properly. When I plug my Zen Touch into my PC, it detects that an MTP device has been connected, but Windows Media Player doesn't list it under the Sync tab, and when I try to install the "Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players", the installer complains that "Setup could not detect any portable device on your system... please ensure that Zen Touch PlaysForSure Firmware is properly installed". The device's firmware version is 2..0, and as I have already said, both this and the Zen Xtra were working fine with my PC up until a couple of days ago. Additionally, the "docked" icon?no longer appears?on the Zen Touch's display when plugged into the PC. I have made the registry change suggested in Creative Knowledge Base Solution ID #9287, and my PC is up-to-date with Windows Hotfixes. I've also tried uninstalling all Creative programs and reinstalling them one at a time, but I can not get my PC to correctly work with the Zen devices anymore. Any suggestions? Also, is there some kind of Factory Reset that I can do to get my Zen Xtra back to an earlier firmware?

I had the same issue. My battery ran down during a sync, then I was unable to sync again.
The Zen is showing up fine in the device manager, but none of the software (Media Player, MediaSource) sees it.
Finally, after a day of trying new drivers, running cleanup, etc. I decided to go into the Zen's recovery menu. To get there, press and hold the Play button and press and hold the reset (use a paperclip) button while powering up.
Once there, select the first option in the menu to Clean up the system. I forgot what it's called and I'm in the middle of a sync now, so can't look.
Worked fine after that. Phew!
If your device is being detected fine, but cannot sync, try that and post here if it fixes it.
Tooner
evokefrank.googlepages.com

Nomad Zen Xtra using Windows 98 (Not 98

Good day,
I thought I'd share this information since I couldn't find anything about it during the past few weeks when I was looking.
I decided to leap into the MP3 world and after much research concluded the Jukebox 3 was the player for me, only to find out it was no longer manufactured! So I continued my hunt and decided on a Nomad Zen Xtra 30GB unit.
The only problem is it says it needs Windows 98SE and I unfortunately am still running 98 (laugh if you must). So when I got the unit I thought I might as well try and see if it works before going through all the hassle of upgrading an operating system.
It works! I was able to install the CD and update the new drivers, firmware and Nomad Explorer files off of Creative Downloads. The only thing that does not work is Creative MediaSource/Organizer software. This isn't too big a deal from what I can see as it is the MP3 ripper. I downloaded a freeware program called CDex (which is great by the way) and I rip all my CD's using this then use NOMAD Explorer to load it on the dri've. FYI, I also had to download the latest Adaptec APSI driver as well so CDex would work.
Nomad Explorer can also set-up the playlists although I understand it is somewhat easier using the Creative software. I am not sure if I am missing any other big features but it seems to be doing everything I want of it and I love it.
Anyhow, I'm about 8GB into it and all is working very well and I am happy that I didn't have to spend hours on a operating system upgrade.
Hope this helps someone!Paul

I have a Zen Xtra 40GB and I'm using Windows 98SE and I have not been able to get things to work. I tried using the installation disk and it could not complete the install....it would hang up at the point where the drivers were being loaded. After some playing around I got the drivers installed, but Nomad Explorer did not see that the MP3 player was connected. I also tried MediaSource (it loaded on just fine) and it recognized the player, but would crash when the program tried to "read" from the player. I plan to return the player and get my money back.

Nomad Zen Xtra wont boot up

my Nomad Zen Xtra wont boot up. It starts up, gets to the EAX screen, and then just hangs. I've tried the reset button, but it always just hangs at the EAX start up screen. I dont want to lose all my music files.any ideas?

I have resolved ALL of my problems. What a nightmare!
I think this is what I did (but my recollection is poor since I tried so many things).
Install Windows Media Player v and all updates. However, the WMP is crap as an organizer and full of software bugs, so don't waste time trying to organize your Nomad. Windows Media Player is hopeless. WMP also mucks up many filenames on your computer by "intelligently" renaming them! What a disaster!
I then downloaded and installed [color="#ff0000"]Creative MediaSource 5. Nothing else works. Remove all previous versions. Do not install Nomad Explorer of any kind, it will install bad drivers and still continues to report?that your Nomad is not connected, even though it is. Make sure it is off your computer and don't install any new version.
My Nomad is version 2.0.03, using an old 60Gb laptop dri've.
Media Source 5 recognizes the Nomad and allows you to sync files fine. However, before connecting to the Nomad make sure you configure your default music library etc. to stop it scouring your computer for music files. And backup your library first of all.
Using MediaSource 5 is slightly different than before. It is difficult to figure in which direction things are synchronizing, but apart from that it should work for you. I'm just glad to be able to use the Nomad again.
Use Nero to rip, not MediaSource.
I hope this hel
ps.
Ian

320 gigabyte Harddisk is out in IDE 2,5 can I use it on a Nomad zen xtra??

Hi everbody
320 gigabyte Harddisk is out in ide 2,5 can I use it on a Nomad zen xtra?
Or is it limitated to the ID Tags?
In my old player Zen usb 2.0 I work with a 60 Gig but it recognised only 3 Gig with this 3 it works fine. :womanvery-happy:
I have the Firmware Version "ZenXtraP4SAudible_PCFW_LB_2_0_03.exe" on the unit Zen Xtra.
Thanx
Zengig

N?
Thank you so much for your answer.
I like the old Nomad Zen especially? the sound is fantastic compared with the mass brand I pod.
The cheap plasic haptik or marketing manipulation (WE apple user are a family) is a betray to us IMHO.
Thank you ?<a target="_self" rel="nofollow" href=". . . . . user/viewprofilepage/user-id/32067">coachop94[/url]

NOMAD ZEN XTRA 30GB & WINDOWS VISTA & D/L SOFTWARE ISS

I was hoping someone can please help me out here in Forum Land ?I just bought a new computer with WINDOWS VISTA and my Installation disk is not compatible. I have tried d/l from this site with no luck. It will go to the WIZARD part but won't finish the installation. I need to get the Software on my new puter for my NOMAD ZEN XTRA 30GB MP3 Player.Namely I guess the Creative MediaSource and it's amazing Organizer.Any links or steps in how too would be most appreciated I have emailed the Creative team but I keep get stuck at what to do next. They said something about installing and completing the firmware update, your player will be using the PlaysForSure software, but on the same sentence he/she says "However you will need to do this on an XP system".. and I have Vista so I am totally confused. I also checked out the site he/she suggested about installing this FirmWare and that site says "Back up all audio, video, image or data files stored in the player to a secure location before changing the firmware. All contents in the player will be lost when you install a new firmware"? -- How can I back up when I can't access it's And surely, I don't want to lose my over 2,500 songs ! Yikes... This was under Solution ID # 4789?I am hoping I can get your help out there as I dearly love my MP3 player and want to continue importing songs ?thank you in advance for any advice you can offer me ?cheers Lisa

Hey Lissa,Did you find any solution in your problem because i have the same problem and i dont know what to do.Plz let me know if u downloaded any thing in your Vista Computer. Thanks alotSuzy

Cannot completely uninstall Nomad Zen Xtra softw

I needed to uninstall the software that came with the nomad zen xtra 40GiG player. So i first uninstalled the software and then the drivers, however in my computer it still displayed the adapter to the player as a dri've. Now mind me I wouldnt care much but now whenever I plug in any usb device my computer cannot detect it because the current slot is taken.
So I installed advance uninstalled pro 2004 and looked arround yet there was no trace of the driver, software or anything even related to creative. So I did the next step, I used Registery Mechanic and found some broken registrys which I promptley deleted, but now on loadup I still have that dri've, the only diffrence is the nomad icon does not appear there anymore, its replaced by the default icon that any file recieves when it cannot be linked to a software.
How can I remove it's
any Ideas?
Using Windows XP SP2
with USB 2.0
Thank you for your time

Use Driver Cleaner Pro http://www.drivercleaner.net/ free ware that cleans out drivers,.sys.ini,inf and registry settings.
It cleans completely and does not dump to the recycle bin so use caution,I use JV6 which I find not only better at cleaning but much safer than System Mechanic(in fi've years of use It has never hosed my system) you can find the last free version(full function-no time limit) @ http://www.oldversion.com/program.php?n=jv6 or the new pay version @ http://www.jv6.org/
Many functions to clean,including full scan and search by software(I would try this method)
If you have a Creative Sound card SB Li've or Audigy they include a driver clean up utility CTZAPXX.exe look for it in the C:\Program Files|Creative\Program folder or on your Install disc,it may be available here on Creative Support site or a google search will return many hits.
If you can't find it P.M. me and i will e-mail or post it up on a web site for you.
Just one more caution on working in your registry,always a good idea to back up the registry or set a "restore point" prior to altering the registry,if your not comfortable doing these things stop and ask some one for assistance
Good luck and report back any success
~Trey~Message Edited by Trey69 on 05-4-2005 04:59 AM

Creative MediaSource will not recognize Nomad Zen Xtra 30BG

Creative MediaSource will not recognize Nomad Zen Xtra 30BG? Hello, I am new to this forum and very frustrated, I own?a 30Bg Zen Xtra and all of a sudden MediaSource will not allow the transfer of files. Here are my specs and things I've tried to no avail:
Firmware: .20.08 (is this the latest upgrade?)
Software: 2.02.06
O/S: Win XP, SP2
Windows Media Player
Checking device manage it is recognized as a portable device, however it is not detected in WMP . Changed my USB permissions in the registry, downgraded WMP to version 0 (rebooted when prompted), upgraded the application software (uninstalled version 2.02.06?and rebooted?) upgraded?to version 5.20.23 as well installed the plug in, version 5.0.38, which now gives me and error while installing " setup is unable to detect?a supported product on your system, click retry....." tried the different USB ports on the pc as well as changing the cables. I do not know what else to do...any assistance will be greatly appreciated..thanks in advance.

DreadRasta40 wrote:
Creative MediaSource will not recognize Nomad Zen Xtra 30BG? Hello, I am new to this forum and very frustrated, I own?a 30Bg Zen Xtra and all of a sudden MediaSource will not allow the transfer of files. Here are my specs and things I've tried to no avail:
Firmware: .20.08 (is this the latest upgrade?)
Software: 2.02.06
O/S: Win XP, SP2
Windows Media Player
Checking device manage it is recognized as a portable device, however it is not detected in WMP . Changed my USB permissions in the registry, downgraded WMP to version 0 (rebooted when prompted), upgraded the application software (uninstalled version 2.02.06?and rebooted?) upgraded?to version 5.20.23 as well installed the plug in, version 5.0.38, which now gives me and error while installing " setup is unable to detect?a supported product on your system, click retry....." tried the different USB ports on the pc as well as changing the cables. I do not know what else to do...any assistance will be greatly appreciated..thanks in advance.
Do you have the driver installed for the device?You can find that here.http://support.creative.com/download...ale=033&nPage= WMP is for MTP devices which the Xtra is not, There is a firmware update for the device HOWEVER updating to that firmware may just kill the player so I would not advise doing it since you have XP & you will be able to sync using MediaSource. Did you install the Creative Zen & Nomad Jukebox plug-in 5.00.22? Click on Show Details & read them before installing anything.

Length of Warranty on Nomad Zen Xtra 30

Would it be worth it to buy a retailer's warranty (for example, circuit city's 2 year, $65 dollar warranty)?
Message Edited by koushirou on 2-05-2004 09:22 AM

So, this is an old thread, but I never did get around to buying my nomad. I'm planning on doing so now, and the same question stands. Does anyone know the best deal I can get on one Nomad Zen Xtra 60 GB (decided i don't want 30 anymore) along with a reasonably long warranty? I looked at walmart.com but I think their service plan doesn't cover accidents (like dropping it), and i am very accident prone (i go through one cd player every few months from dropping them so much).

No sound Nomad Zen Xtra 30

Hi,
I just bought a Nomad Zen Xtra 30gb. It has the most recent firmware upgrade from the creative website too.
The device is absolutely brand new and came in a fully sealed packet.
The problem is that even though my MP3 player appears to do everything it's supposed to do on the screen, and even appears to play transferred tracks, I'm getting absolutely no sound from the ear phones.
Now I checked the ear phones on another device and they are absolutely fine.
The weird thing is that the software that comes with the zen xtra plays files on my hard dri've fine, and appears to play music from the MP3 player. However no sound is produced then either.
Please help, this is driving me mad as I can find no hint of a solution anywhere, and no one seems to report a similar problem.

All you can try is the recovery procedure in the FAQ post. If this doesn't revi've sound the player is faulty.

Nomad Jukebox Zen Xtra connection probl

Hello Everyone.
First off, I am using Nomad Jukebox Zen Xtra (30G) with Windows XP - SP2. A few days ago my Zen Xtra would connect to my pc but as of today it no longer does. After searching through similar posts I am assuming it's not a problem with my Zen but with my PC. None the less, I did do my best to troubleshoot myself. I downloaded all possible firmware/drivers from Nomadworld.com. However - the firmware upgrade would not complete due to the fact that my device is not connected. I tried connecting my player to other USB ports on my PC - no luck. I used Nomad Explorer to do my transfers and as suggested in the FAQ, I tried downloading others (ie: MediaSource) however these wouldn't install because it could not detect any device. When I go to Device Manager/USB/ my Nomad isn't even listed. I have tried 3 different USB cables. The player isn't locked. Other devices work with the usb cables and port (ie: logitec clicksmart camera)
So now assuming it is a PC problem, where do I go from now? Thanks in advance for any help you can give me

Hibbs,
Thank you for your response. The only thing that comes to mind is k-lite codec pack I downloaded and installed for the Indeo codec needed for my clicksmart 820. I'm not sure if that would have anything to do with the disruption of my device. The camera itself worked but wouldn't record videos until I installed the codec. Everything else to my knowledge is the same. No other new USB devices installed either.

Nomad Zen Xtra Connection prob

Similar Messages

Maybe you are looking for