Nomad Zen Xtra does not power

I have just recieved my Zen Xtra today. But when I power it on, per the manuals proper instruction, it does not power on. I have also tried to charge the battery with the mp3 player both on & off. When I had it on the "using AC outlet" icon would show. It does seem I need a new battery. But I fear something else, could the charging mechanism be dead? This player is a refurbished product by the way. It works on the AC outlet, I can transfer files to it, and I can successfully connect it to the USB port. the hard dri've sounds fine. It seems I need to buy a new battery right? Where else besides Creative.com can I buy one? Thanks.

First, read/try the advice here
Failing that, I would suggest buying a replacement battery. Check froogle.com (that link is set to the best deals) for a good price.

Similar Messages

ZEN 4GB does not power on unless plugged with lapt

I bought a new creative zen(4GB) a week back.
I charged it fully for 5 hrs and then tested it by playing a few songs and videos.
I switched it off and tried to power it on after around 5 hrs but it did not respond.
When i connected it to the laptop again...it got powered on. After that i removed it from laptop and again played a couple of songs.
If i power it on after short intervals...it works...but if i power it on after 2-4 hrs it does not power on unless docked to the laptop and this is a recurring feature.
Please, respond in case someone has faced such a thing or could give some idea.
Thanks.

I would use recovery mode, do a format of the player and then upgrade the firmware if you have not already upgraded. The format eliminates any possibly corruption (which can cause shut down and battery performance issues) and it also resets the player settings... the later firmware versions definitely have better battery and charging performance in my experience (current for the ZEN 2/4/8/6/32 is .20.02)
If it still happens after that then it may be a defect. It does happen - and support can help you get a warranty replacement in that situation. Even though it seems like the forums are always flooded with problems you have to keep in mind the massi've number that don't have any issues and never have any reason to visit here (so in other words keep the chin up, if you do have to get a replacement don't panic).

Nomad Zen Xtra using Windows 98 (Not 98

Good day,
I thought I'd share this information since I couldn't find anything about it during the past few weeks when I was looking.
I decided to leap into the MP3 world and after much research concluded the Jukebox 3 was the player for me, only to find out it was no longer manufactured! So I continued my hunt and decided on a Nomad Zen Xtra 30GB unit.
The only problem is it says it needs Windows 98SE and I unfortunately am still running 98 (laugh if you must). So when I got the unit I thought I might as well try and see if it works before going through all the hassle of upgrading an operating system.
It works! I was able to install the CD and update the new drivers, firmware and Nomad Explorer files off of Creative Downloads. The only thing that does not work is Creative MediaSource/Organizer software. This isn't too big a deal from what I can see as it is the MP3 ripper. I downloaded a freeware program called CDex (which is great by the way) and I rip all my CD's using this then use NOMAD Explorer to load it on the dri've. FYI, I also had to download the latest Adaptec APSI driver as well so CDex would work.
Nomad Explorer can also set-up the playlists although I understand it is somewhat easier using the Creative software. I am not sure if I am missing any other big features but it seems to be doing everything I want of it and I love it.
Anyhow, I'm about 8GB into it and all is working very well and I am happy that I didn't have to spend hours on a operating system upgrade.
Hope this helps someone!Paul

I have a Zen Xtra 40GB and I'm using Windows 98SE and I have not been able to get things to work. I tried using the installation disk and it could not complete the install....it would hang up at the point where the drivers were being loaded. After some playing around I got the drivers installed, but Nomad Explorer did not see that the MP3 player was connected. I also tried MediaSource (it loaded on just fine) and it recognized the player, but would crash when the program tried to "read" from the player. I plan to return the player and get my money back.

Creative MediaSource will not recognize Nomad Zen Xtra 30BG

Creative MediaSource will not recognize Nomad Zen Xtra 30BG? Hello, I am new to this forum and very frustrated, I own?a 30Bg Zen Xtra and all of a sudden MediaSource will not allow the transfer of files. Here are my specs and things I've tried to no avail:
Firmware: .20.08 (is this the latest upgrade?)
Software: 2.02.06
O/S: Win XP, SP2
Windows Media Player
Checking device manage it is recognized as a portable device, however it is not detected in WMP . Changed my USB permissions in the registry, downgraded WMP to version 0 (rebooted when prompted), upgraded the application software (uninstalled version 2.02.06?and rebooted?) upgraded?to version 5.20.23 as well installed the plug in, version 5.0.38, which now gives me and error while installing " setup is unable to detect?a supported product on your system, click retry....." tried the different USB ports on the pc as well as changing the cables. I do not know what else to do...any assistance will be greatly appreciated..thanks in advance.

DreadRasta40 wrote:
Creative MediaSource will not recognize Nomad Zen Xtra 30BG? Hello, I am new to this forum and very frustrated, I own?a 30Bg Zen Xtra and all of a sudden MediaSource will not allow the transfer of files. Here are my specs and things I've tried to no avail:
Firmware: .20.08 (is this the latest upgrade?)
Software: 2.02.06
O/S: Win XP, SP2
Windows Media Player
Checking device manage it is recognized as a portable device, however it is not detected in WMP . Changed my USB permissions in the registry, downgraded WMP to version 0 (rebooted when prompted), upgraded the application software (uninstalled version 2.02.06?and rebooted?) upgraded?to version 5.20.23 as well installed the plug in, version 5.0.38, which now gives me and error while installing " setup is unable to detect?a supported product on your system, click retry....." tried the different USB ports on the pc as well as changing the cables. I do not know what else to do...any assistance will be greatly appreciated..thanks in advance.
Do you have the driver installed for the device?You can find that here.http://support.creative.com/download...ale=033&nPage= WMP is for MTP devices which the Xtra is not, There is a firmware update for the device HOWEVER updating to that firmware may just kill the player so I would not advise doing it since you have XP & you will be able to sync using MediaSource. Did you install the Creative Zen & Nomad Jukebox plug-in 5.00.22? Click on Show Details & read them before installing anything.

Nomad Zen Xtra prob

Well, I just emailed support again but overlooked the (faster?) forums until now. Maybe someone can help me out... ------- EMAIL SENT -------- Hi, I emailed the customer support a while ago and got a generic reply as how to reset my mp3 player's OS. *This is not a software problem, it is a hardware problem... I want to send my Nomad Zen Xtra in to Creative to get it fixed and I will pay for the repairs.* Here is an original copy of the message: Hello, about a year ago I purchased my Creative Nomad Zen Xtra. Only a couple months into using it, I dropped the MP3 player on the headphone jack where my headphones were plugged in and the sound stopped working correctly. I think maybe that the soldering that is keeping the headphone jack on the circuit board is messed up or disconnected. Some sound does come out of one earphone when I wiggle the plug around a bit. How much do you think this would cost me? The player is no longer under its one year warranty, either. Thanks in advance. - Steve ----- Originally answered by Technical Support, Creative Labs Americas ----- Thanks, Steve-oMessage Edited by Jeremy-CL on 0-2-2005 0:08 AM

I?ve posted it before, but here we go again:
Two or three months after buying my 40GB zen xtra, the same thing happened to me. I deduced it was a battery problem and prepared myself to expand U$29 on a new one (I li've in Rio and it would be impossible for me to send it back for warranty). While I was looking for the new battery, I kept using it in my job and at home, with the power cord hooked up. I did it some times and one day, without any apearent reason, it started to charge the battery and ever since it never happened again. I friend of mine mentioned that these Li-Ion batteries can have this kind of problem. By that time, he suggested some charging manouveres to recover it but it was no needed. What I suggest you is to keep trying to charge it. You may be as lucky as me!

Windows XP driver problem - Nomad Zen Xtra and Zen To

I have both a Nomad Zen Xtra 60GB and a Zen Touch 20GB, both of which were working fine with my Windows XP Pro SP2 computer until a couple of days ago. I had recently put firmware 2.0.03 onto the Zen Xtra, and was using the drag-and-drop method in Windows Explorer to copy loads of albums across to it from my music folder. It seems I might have tried to copy too much over at one go, because eventually the file copying just stopped, and I had to unplug the Zen Xtra from the PC to abandon the copy process. Since then, neither Zen device has been properly recognised by any of my PCs. When I plug the Zen Xtra into?a USB port, Windows brings up the messages: "Found new hardware: Nomad Jukebox Zen Xtra" and "Found new hardware: MTP device", then brings up the Found New Hardware Wizard, even though firmware 2.0.03 is supposed to provide "seamless support with any computer running Microsoft? Windows Media? Player 0 and Windows? XP - no drivers or software needed" (I have WMP0.00.00.4036 installed). The Zen Xtra's display does not show the "docked" icon except when plugged into my laptop (running XP Home Edition)... but even on the laptop Windows still asks for a driver, which it then fails to install properly. When I plug my Zen Touch into my PC, it detects that an MTP device has been connected, but Windows Media Player doesn't list it under the Sync tab, and when I try to install the "Creative Software Suite for PlaysForSure-enabled Creative Zen Touch Players", the installer complains that "Setup could not detect any portable device on your system... please ensure that Zen Touch PlaysForSure Firmware is properly installed". The device's firmware version is 2..0, and as I have already said, both this and the Zen Xtra were working fine with my PC up until a couple of days ago. Additionally, the "docked" icon?no longer appears?on the Zen Touch's display when plugged into the PC. I have made the registry change suggested in Creative Knowledge Base Solution ID #9287, and my PC is up-to-date with Windows Hotfixes. I've also tried uninstalling all Creative programs and reinstalling them one at a time, but I can not get my PC to correctly work with the Zen devices anymore. Any suggestions? Also, is there some kind of Factory Reset that I can do to get my Zen Xtra back to an earlier firmware?

I had the same issue. My battery ran down during a sync, then I was unable to sync again.
The Zen is showing up fine in the device manager, but none of the software (Media Player, MediaSource) sees it.
Finally, after a day of trying new drivers, running cleanup, etc. I decided to go into the Zen's recovery menu. To get there, press and hold the Play button and press and hold the reset (use a paperclip) button while powering up.
Once there, select the first option in the menu to Clean up the system. I forgot what it's called and I'm in the middle of a sync now, so can't look.
Worked fine after that. Phew!
If your device is being detected fine, but cannot sync, try that and post here if it fixes it.
Tooner
evokefrank.googlepages.com

Cannot completely uninstall Nomad Zen Xtra softw

I needed to uninstall the software that came with the nomad zen xtra 40GiG player. So i first uninstalled the software and then the drivers, however in my computer it still displayed the adapter to the player as a dri've. Now mind me I wouldnt care much but now whenever I plug in any usb device my computer cannot detect it because the current slot is taken.
So I installed advance uninstalled pro 2004 and looked arround yet there was no trace of the driver, software or anything even related to creative. So I did the next step, I used Registery Mechanic and found some broken registrys which I promptley deleted, but now on loadup I still have that dri've, the only diffrence is the nomad icon does not appear there anymore, its replaced by the default icon that any file recieves when it cannot be linked to a software.
How can I remove it's
any Ideas?
Using Windows XP SP2
with USB 2.0
Thank you for your time

Use Driver Cleaner Pro http://www.drivercleaner.net/ free ware that cleans out drivers,.sys.ini,inf and registry settings.
It cleans completely and does not dump to the recycle bin so use caution,I use JV6 which I find not only better at cleaning but much safer than System Mechanic(in fi've years of use It has never hosed my system) you can find the last free version(full function-no time limit) @ http://www.oldversion.com/program.php?n=jv6 or the new pay version @ http://www.jv6.org/
Many functions to clean,including full scan and search by software(I would try this method)
If you have a Creative Sound card SB Li've or Audigy they include a driver clean up utility CTZAPXX.exe look for it in the C:\Program Files|Creative\Program folder or on your Install disc,it may be available here on Creative Support site or a google search will return many hits.
If you can't find it P.M. me and i will e-mail or post it up on a web site for you.
Just one more caution on working in your registry,always a good idea to back up the registry or set a "restore point" prior to altering the registry,if your not comfortable doing these things stop and ask some one for assistance
Good luck and report back any success
~Trey~Message Edited by Trey69 on 05-4-2005 04:59 AM

Nomad Zen Xtra - 60G - Major Issues

I bought the Zen Xtra for my husband for his b-day last April (2004). Over the summer the Zen Xtra worked well and transfer of 307 tracks of songs was successful. Then, in the fall we decided to try setting up playlists through the Creative MediaSource software. Since then we have had numerous problems with the machine. First of all, when trying to create a playlist, the Xtra froze. We've since gone through the motions of (a) upgrading all the software/firmware we could and (b) rebooted and done a disk cleanup.
Unfortunately this has NOT solved our problem. Yes - we are now able to use the Zen Xtra for listening to the tracks we already have on the machine, but everytime we connect it to the computer and try to either add new tracks, (We aren't even able to do an AudioSync! The error we get is :"Unable to read file. File may be in use, missing or corrupted". Of course this is not the case because we are able to listen to the song from the Zen Xtra.) listen to a track (through the xtra on the computer), (the error we get here is : "Unable to playback current track. The audo device may not be available or the file may be missing or corruped.") or try to create a playlist (The error here is: The operation failed. Ensure player is properly connected before trying again.")
In each of these cases, the Zen Xtra freezes up and we have to go through the whole process again just to get the stupid thing to play songs so we can listen to them. We are very disappointed that we are not able to use the Zen Xtra to its full capablities. What are we missing? How can we get it to work as it's is supposed to through the software on the computer?

Thanks Cat for the info. I've managed to get all my files from the Xtra over to my PC.
I am still experiencing the following by the Zen Xtra:
A) if the machine is shut off for longer than a day, it takes from 25-30mins to turn on. It gets "stuck" at the EAX screen
B) I am still unable to create a playlist on through the Media Centre. Everytime I try, it says that the Zen Xtra is not connected and then my Zen gets "stuck" forcing me to do a manual reboot of it.
I believe this to be a software problem, but that's not to say that I'm not totally disappointed that I'm unable to use my Zen to its full potential. (And manually rebooting and/or waiting for 25-30min to listen to my Zen isn't fun either.) Does this SOUND like a simple software issue or is it more? (Remember my warranty will run out soon)
If it IS a software issue is there any OTHER software out there that I would be able to use to appreciate my Zen to its fullest?
Thanks again.J

NOMAD ZEN XTRA 30GB & WINDOWS VISTA & D/L SOFTWARE ISS

I was hoping someone can please help me out here in Forum Land ?I just bought a new computer with WINDOWS VISTA and my Installation disk is not compatible. I have tried d/l from this site with no luck. It will go to the WIZARD part but won't finish the installation. I need to get the Software on my new puter for my NOMAD ZEN XTRA 30GB MP3 Player.Namely I guess the Creative MediaSource and it's amazing Organizer.Any links or steps in how too would be most appreciated I have emailed the Creative team but I keep get stuck at what to do next. They said something about installing and completing the firmware update, your player will be using the PlaysForSure software, but on the same sentence he/she says "However you will need to do this on an XP system".. and I have Vista so I am totally confused. I also checked out the site he/she suggested about installing this FirmWare and that site says "Back up all audio, video, image or data files stored in the player to a secure location before changing the firmware. All contents in the player will be lost when you install a new firmware"? -- How can I back up when I can't access it's And surely, I don't want to lose my over 2,500 songs ! Yikes... This was under Solution ID # 4789?I am hoping I can get your help out there as I dearly love my MP3 player and want to continue importing songs ?thank you in advance for any advice you can offer me ?cheers Lisa

Hey Lissa,Did you find any solution in your problem because i have the same problem and i dont know what to do.Plz let me know if u downloaded any thing in your Vista Computer. Thanks alotSuzy

Nomad Zen Xtra wont boot up

my Nomad Zen Xtra wont boot up. It starts up, gets to the EAX screen, and then just hangs. I've tried the reset button, but it always just hangs at the EAX start up screen. I dont want to lose all my music files.any ideas?

I have resolved ALL of my problems. What a nightmare!
I think this is what I did (but my recollection is poor since I tried so many things).
Install Windows Media Player v and all updates. However, the WMP is crap as an organizer and full of software bugs, so don't waste time trying to organize your Nomad. Windows Media Player is hopeless. WMP also mucks up many filenames on your computer by "intelligently" renaming them! What a disaster!
I then downloaded and installed [color="#ff0000"]Creative MediaSource 5. Nothing else works. Remove all previous versions. Do not install Nomad Explorer of any kind, it will install bad drivers and still continues to report?that your Nomad is not connected, even though it is. Make sure it is off your computer and don't install any new version.
My Nomad is version 2.0.03, using an old 60Gb laptop dri've.
Media Source 5 recognizes the Nomad and allows you to sync files fine. However, before connecting to the Nomad make sure you configure your default music library etc. to stop it scouring your computer for music files. And backup your library first of all.
Using MediaSource 5 is slightly different than before. It is difficult to figure in which direction things are synchronizing, but apart from that it should work for you. I'm just glad to be able to use the Nomad again.
Use Nero to rip, not MediaSource.
I hope this hel
ps.
Ian

Length of Warranty on Nomad Zen Xtra 30

Would it be worth it to buy a retailer's warranty (for example, circuit city's 2 year, $65 dollar warranty)?
Message Edited by koushirou on 2-05-2004 09:22 AM

So, this is an old thread, but I never did get around to buying my nomad. I'm planning on doing so now, and the same question stands. Does anyone know the best deal I can get on one Nomad Zen Xtra 60 GB (decided i don't want 30 anymore) along with a reasonably long warranty? I looked at walmart.com but I think their service plan doesn't cover accidents (like dropping it), and i am very accident prone (i go through one cd player every few months from dropping them so much).

8800 does not power on but shows the charging symbol! HELP!

Hello everyone,
I have been searching for days now across the web for a solution to a very bugging situation. A'las i am close to giving up. someone please try and help. So here is the problem: I recently bought a 8800 rim (branded for cingular/AT&T but UNLOCKED) from ebay powerseller with 100% rep. it was advertised in MINt condition.
It arrived two days later and seemed in great physical condition.
So i plug in the charger and let it charge for more than 8 hours. I try turning it on but to no avail. During the charge the screen goes dimly on and shows a battery with an electric bolt going through (I assume that means charging..).
It initially seemed to me as a battery problem. So i took it to a local store and borrowed one of their batteries for 8800 and the phone started working fine also made a call with my temporary T-mobile sim inserted. (although their battery was also on low charge)---
So i come home and with a new OEM 8800 battery. plugged it in and charged for like 4 hours and the screen goes on with the charging symbol but does not power on.
I have repeatedly searched through the WWW and came across wide variety of dilemmas but none were any helpful. I also tried installing the latest OS...which also spectacularly failed [got an error that ...loading failed during the mult-load seesion...or something like that. I followed several very well written guides [advising that the manager and OS be installed on PC and etc.].
SO I MAKE A DESPERATE REQUEST FOR HELP FROM ANYONE OUT THERE WHO CAN HELP. WHAT'S THE DIAGNOSIS WITH THIS BB. IT WAS ABLE TO WORK WITH THE BORROWED BATTERY FROM A LOCAL STORE..EVEN MADE A CALL AND EVERYTHING...BUT WITH THE BATTERY THAT CAME WITH THE eBay PURCHASE AND THE THE BRAND NEW THAT I BOUGHT....IT DOES NOT POWER ON.
BESIDES HOW LONG SHOULD I BE CHARGING IF IT IS NEW OR IF THE PHONE HAS NOT BEEN IN USE FROM SOME TIME??
THANKS IN ADVANCE.
Please help ASAP.
Mirza

How are you charging the BlackBerry? Do you have a wall charger or are you charging via USB cable from your PC? Its also possible that the charging circut in your BlackBerry is faulty. This would explain why a charged battery works while your uncharged battery is not.

HT1339 My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

My ipod was not recognized by itunes and not does not power on after I restarted the ipod service in the Windows admin tools. I cannot restore the ipod since it is not recognized by my PC now. Any suggestions?

Time to replace it: $49 2nd Gen shuffle at online Apple Store...

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired. I erased the drive and restored system back to the previous day.

I have had my iMac for 55 days now and twice I had to power off/on and then It does not power up correctly. I verified my disk and found errors that could not be repaired (errors were associated with boot drive) I erased the drive and restored system back to the previous day. Has anyone else experienced this problem?

Since it's a new machine, contact Apple's Support and let them deal with it. Allen's already recommended an Apple repair station visit. Do note that if you have AppleCare's protection plan and you're within 50 miles (80 KM) of an Apple repair station, you might be eligible for an onsite repair since yours is a desktop machine (depends on where you're located). BTW, the AppleCare Protection Plan's the best warranty policy available for desktop machines. Get it if you don't have it before contacting Apple.
27" i7 iMac (Mid 2011) refurb, OS X Mavericks (10.9.4), ML & SL, G4 450 MP w/Leopard, 9.2.2

Screen/Computer does not Power Up when life the Display from being Closed

Sometimes (not always), when i come back to my MacBook Pro and open the display after it has been closed for a bit, the screen and computer does not power back up or anything. If you look at the screen there is a very FAINT image on the screen of whatever was open when the screen was closed, but you can't do anything, nothing is responsive, etc. I have to hold down the power button until it turns off, and then right before it turns off the screen will power up for one second and then shuts off. Any ideas?

I am having a similar issue when transitioning from my external display via the Mini Display to DVI adapter back to the internal LCD. The screen will go black, the machine will not sleep if I close the lid, and none of they key commands appear to work. The only response I can get is the caps lock key will turn off and on. When I restart the machine, I get no details on a Kernel Panic, or anything else, so wondering if it has something to do with the video drivers.

Nomad Zen Xtra does not power

Similar Messages

Maybe you are looking for