Nomadix displaying in "Frequent" instead of gmail/google?

When clicking the Firefox icon on my (Windows 7) taskbar, I noticed that "Nomadix" is listed as a "Frequent" instead of gmail. Is firefox being redirected or otherwise compromised?

Are you accessing the internet thru a wireless gateway?
http://www.nomadix.com/access-gateway

Similar Messages

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

After installing the new Yosemite OS on my iMac I can no longer send email. I can receive email, but not send. I use gmail and can send email on the gmail (google) site, but not on "mail" on my iMac. Any others with this problem? What should we do?

My gmail, which is correctly configured for Mail with gmail SMTP and Google IMAP, works for awhile on Mail, which I leave open while working on other applications. But several times a day I get msg from Google: "We recently blocked a sign-in attempt to your Google Account" . . . and requiring me to verify my account details, re-enter passwords, confirm security settings (or change them from "disable" to "enable less secure methods" and so on). In Mail I also have tried "taking all accounts online", and re-entering my gmail password inside Mail account settings. These steps successfully re-set comms between gmail and Mail ... for awhile, then it happens again. Enough occurrences over a work day that I just quit Mail and revert to accessing gmail directly. Apple Care advisor and an Apple knowledge base article say that Apple can't deal with this, as gmail is third-party app, and they refer me to gmail, and so far I've found nothing helpful there.
From today I also have several instances of a window saying "Mail has unexpectedly closed" and asking me to Re-open it.
I also use Yahoo mail, which stops working with Mac Mail at the same time as gmail, but I do not receive notices to re-verify from Yahoo.
I recently upgraded from Mavericks to Yosemite. The Mail problem happened occasionally with Mavericks but is far more frequent with Yosemite.

Mac Mail frequently asks for gmail password, why?

Mac Mail frequently asks for Gmail password, so I have to change it sometimes every time when Mail cheks my email via Gmail Apps autorization.

Hi,
It does work.
What I did find out from another thread is that it has to be Set at Google to be a "Less Secure" App despite it using SSL.
As has been said two step verification can seem to get in the way.
On the Google page for this.
Allowing less secure apps to access your account
Google may block sign in attempts from some apps or devices that do not use modern security standards. Since these apps and devices are easier to break into, blocking them helps keep your account safer.
Some examples of apps that do not support the latest security standards include:
The Mail app on your iPhone or iPad with iOS 6 or below
The Mail app on your Windows phone preceding the 8.1 release
Some Desktop mail clients like Microsoft Outlook and Mozilla Thunderbird
You need to start here https://www.google.com/settings/security/lesssecureapps?hl=en
(Messages is one that they deem a Less Secure app but what "security" they are using is not clear.)
7:52 pm Friday; September 26, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Google Chat on iChat (non gmail Google account).

Hi,
I've been trying to sign into Google Talk via iChat but it keeps rejecting the username/password. I can sign in using the Google chat web client with this ID, as well as all the other Google services associated with the account. I'm now on Lion but it was also an issue on Snow Leopard.
Has anyone else experienced this issue?
David

Hi,
My understanding is that when you go to a Google Page you can sign in top right.
Once your Name displays then you can click and hold that to see the Account Setting option.
That will lead you to a page like this
In there "Talk" should be in the My Products Section for the Chat option to work.
If iGoogle is in that section you can go to that page (your iGoogle page) and Chat should load down the left hand side. (or the view I have set up places it there)
iChat should be set up as follows:-
iChat Menu > Preferences > Accounts
Choose the Plus button at the bottom of the list.
In the pane that opens select the top item then choose Jabber as the account type.
Enter the name as it is for logging into Google.
Enter the password you use there.
Now if you have iChat 5 (And I presume iChat 6) you can then enter the Server name in the bits below the Password box
This should be made to read google.com
Click Done.
If this is iChat 4.x.x then you will not be able to change the server there
As the Account will presume the server name is the end of your Email address this will appear in the server Setting tab (As well as the message about Logging in not woring)
Open the server settings tab and change the server name to google.com
This obviously works as an alternative to the iChat 5 method above.
This Help Page seems to say that a "Google account" will work but also has a Note to say a Gmail account is needed to use GoogleTalk.
I have certainly seen people post here to say that they have Non Gmail Google Account and have Enabled talk and then added it to iChat. (AS described above)
7:44 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

How can I display an icon, instead of text string, as a validation prompt?

My validate method inside my custom validator is like this:
public void validate(FacesContext context, UIComponent component, Object value) {
Pattern datePattern = Pattern.compile("(\\d{2})/(\\d{2})/(\\d{4})");
Matcher dateMatcher = datePattern.matcher((String)value);
if(!dateMatcher.find()){
    ((UIInput)component).setValid(false);
    FacesMessage message = new FacesMessage();
    String msg = "[" + value + "] invalid date";
    message.setDetail(msg);
    context.addMessage(component.getClientId(context), message);
    FacesMessage facesMsg = new FacesMessage(FacesMessage.SEVERITY_FATAL, "xx", "msg");
    throw new ValidatorException(facesMsg);
}My JSP has this:
<h:inputText id="test" value="#{projecthandler.test}">
<f:validator validatorId="DateValidator" />
</h:inputText>
<h:message id="testErrorMessage" for="test"/>The <h:message> tag will kick in if the user has invalid data in the <h:inputText> field and clicks submit.
When the page is regenerated, the user will see a text string reflecting what the issue is.
However, instead of this, I would like to display an icon consisting of a red circle with an exclamation point.
The user is supposed to click on the icon if they want more information. By clicking on the icon,
the user will see a message box, with a description of the error.
This is our standard for applications. I'm trying to put together a demo showing how an existing application
would work in JSF, so I won't be able to talk others into using JSF, unless I can get the validation to display an
icon instead of text.
Edited by: Kazan on Mar 18, 2009 9:31 AM
Edited by: Kazan on Mar 18, 2009 9:33 AM
Edited by: Kazan on Mar 18, 2009 9:36 AM

OK, I noticed a bug in my validate method. This is updated to fix the bug, and to include the recomendation about background-image:
public void validate(FacesContext context, UIComponent component, Object value) {
    System.out.println("DateValidator.test.1");
    Pattern datePattern = Pattern.compile("(\\d{2})/(\\d{2})/(\\d{4})");
    Matcher dateMatcher = datePattern.matcher((String)value);
    System.out.println("DateValidator.test.1");
    if(!dateMatcher.find()){
      ((UIInput)component).setValid(false);
      FacesMessage message = new FacesMessage();
      String msg = "<span style='background-image: url(/error.gif)'/>";
      message.setDetail(msg);
      message.setSeverity(FacesMessage.SEVERITY_FATAL);
      context.addMessage(component.getClientId(context), message);
      throw new ValidatorException(message);
}When I run this, the litteral string of "<span style='background-image: url(/error.gif)'/>" is printed as the message. It does not interpret this as a span tag with an image url.
Can someone tell me what's going on?

Need my custom webauth page displayed with HTTP instead of HTTPS

I have a custom webauth page installed that I am using with web passthrough authentication on my WLC2006 in order to put up a acceptable use policy page.
The WLC uses HTTPS to display this which causes a security certificate warning to appear if I go with the WLC's own self-signed certificate. Is there a way I can get the WLC to use plain HTTP to display this page instead so I can eliminate the warning?
I have already tried installing a trusted 3rd party certificate on the WLC, but I have this very strange problem where mucking with the WLC's web authentication certificate in any manner causes all network activity on the WLC to break except for CDP and ARP, essentially leaving the WLC dead. Three weeks of troubleshooting with Cisco TAC has yielded no progress on that front so now I am trying to bypass the need for a security certificate altogether since I really don't need to encrypt my acceptable use policy page.

The documentation doesn't provide very clear direction, does it?
To download the WLC's default webauth page, browse to the controller's Security > Web Login Page. Make sure the web authentication type is Internal (Default). Hit the Preview button. Then use your browser's File > Save As... menu item to save the HTML into a file. Edit this to your liking and bundle it and any graphics images up into a TAR archive, then upload via the controller's COMMAND page.

When opening any page associated with Google (main search page, gmail, google maps, etc) the font is so tiny it is unreadable. Any other website is fine and this only happens with Mozilla. I just downloaded 3.6.12 and it's still a problem.

When opening any page associated with Google (main search page, gmail, google maps, etc) the font is so tiny it is unreadable. Any other website is fine and this only happens with Mozilla. I just downloaded 3.6.12 and it's still a problem.

Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
* http://kb.mozillazine.org/Zoom_text_of_web_pages

IE11 - Crystal Reports - PrintMode ActiveX now displaying PDF prompt (instead of printer prompt)

I asked this question over at stackoverflow and am now taking it here: http://stackoverflow.com/questions/20672254/ie11-crystal-reports-printmode-activex-now-displaying-pdf-prompt-instead-of
It's a simple straight-forward question. IE11 is breaking the ActiveX plug-in used for printing from the Crystal Report Viewer. All the pretty pictures are in the link I provided. But the jist is that for my ActiveX Print Mode reports, the PDF dialog is presented now instead of the normal Printer dialog (unless I use Compatibility Mode)
Other details:
I am using the Crystal Reports that comes with Microsoft Visual Studio 2008. For the life of me I can't remember how this got installed on one of my browser's (maybe an install from Visual Studio?) ... but I've been deploying the Crystal Print Control 10.5 (32-bit; version: 10.5.1.2285).
And as mentioned in the stackoverflow post I have all ActiveX settings enabled and ActiveX Filtering off.

Hi William,
Moved your post to the .NET SDK forum.
CR for VS 2008 was included in the installer of Visual Studio, you can remove it from Add/Remove Programs.
Unfortunately the CR Basic that comes with VS 2008 only had one patch released and that's it. IE 11 was not released when it came out so we could not support it.
Currently there are no versions of CR or our SDK packages that do support it.
Crystal Reports Developer for Visual Studio SP 9 will support IE 11. You can get it from the Overview Tab and then on the left side. But it requires VS 2010 or above and SP 9 will support VS 2013 and IE 11.
In VS you could select either ActiveX or PDF:
I don't have IE 11 but to change the PDF go into the Add-ins menu:
See this link for supported OS's and VS's:
http://wiki.sdn.sap.com/wiki/x/b4JiAw
Also, IE 11 is likely on Windows 2008 Server or possibly Window 8.x.
Best thing to do is upgrade VS and then download the CR installer into VS so it supports current OS's and Browsers.
Don

How to display as blank instead of zero (0) if result is zero

Hello :
How to display as blank instead of zero (0) if result is zero.*
*any properties can do this. BI 7.0.
Regards,
Manthana

Hi,
If you are using BI 7.0 ,goto Query designer and click the properties under the 'Query'. Then select 'Value Display' from the properties and there is a drop-down 'Display Zeroes' . You can choose 'Zero as Space' from that drop-down for the query.
Hope it will solve your issue.
Thanks.

Display Extension Number Instead of Switchboard Number

Hi,
We are using CUCM system in one of our branch office, we want to display extension number instead of switchboard number when we call external. But the telecom company said the dial information we send is "Unknown", need to be changed to "National Effective"... The voice gateway is C2951 and it's configured by vendor before; I can't find any configuration related to that, or maybe there wasn't any. Can someone help with this? Thanks.

Make sure the phones have external phone number mask and under route pattern you have Use Calling Party's External Phone Number Mask - checked. Then follow the below to set the called party number plan:
If its a MGCP gateway then under the route pattern>called party transfomrations> set the called party number type to local/national/international depending for the respective route pattern.
Review: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_5_1/ccmcfg/bccm-851-cm/b03cldpt.html#wp1350852
If its H323/SIP you can use translation rules. Review the below document:
http://www.cisco.com/c/en/us/support/docs/voice/call-routing-dial-plans/61083-voice-transla-rules.html#type_plan
-Terry
Please rate all helpful posts

How to fix iframe issue that displays XML values instead of formatted XML in IE11

The following sub.jsp file shows the formatted XML properly as expected when is opened directly:
<% response.setContentType("text/xml"); %>
<book>
<chapter1>chapter 1</chapter1>
<chapter2>chapter 2</chapter2>
</book>
IE11 shows the result as below which are colored and can be collapsed or un-collapsed:
<book><chapter1>chapter 1</chapter1><chapter2>chapter 2</chapter2></book>
But if the sub.jsp is opened in an iframe from the below main.html, it only shows the values of the XML in the iframe:
<!DOCTYPE html>
<html>
<head>
<meta charset="ISO-8859-1">
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
<iframe src="sub.jsp"></iframe>
</body>
</html>
The iframe shows only the XML values, i.e., chapter 1 chapter 2 in IE11. This issue does not happen in IE8.
I appreciate to your if you know how to address this issue.
Regards, Amir

The following sub.jsp file shows the formatted XML properly as expected when is opened directly:
<% response.setContentType("text/xml"); %>
<book>
<chapter1>chapter 1</chapter1>
<chapter2>chapter 2</chapter2>
</book>
IE11 shows the result as below which are colored and can be collapsed or un-collapsed:
<book><chapter1>chapter 1</chapter1><chapter2>chapter 2</chapter2></book>
But if the sub.jsp is opened in an iframe from the below main.html, it only shows the values of the XML in the iframe:
<!DOCTYPE html>
<html>
<head>
<meta charset="ISO-8859-1">
<meta http-equiv="Content-Type" content="text/html; charset=ISO-8859-1">
<title>Insert title here</title>
</head>
<body>
<iframe src="sub.jsp"></iframe>
</body>
</html>
The iframe shows only the XML values, i.e., chapter 1 chapter 2 in IE11. This issue does not happen in IE8.
I appreciate to your if you know how to address this issue.
This issue is also posted at below link:
https://social.msdn.microsoft.com/Forums/en-US/5b0692b4-d312-4797-9089-42c1029ac059/how-to-fix-iframe-issue-that-displays-xml-values-instead-of-formatted-xml-in-ie11?forum=iewebdevelopment
Regards, Amir

Most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter

most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter the title in iPhoto. why the inconsistency? running OS 10.9.5 and using iPhoto 9.5.1

Try this: select one of the photos that are showing the wrong title and use the Photos ➙ Batch Change ➙ Title to File Name menu option.
See if that will put the name that you want under the thumbnail.

How do I display only key instead of description in MDX query

Hi,
Whenever I try to display material number, QN number.... in MDX it only displays the description instead of key. In query designer, it says "display as key and text". How do I display the key only instead of text?
Thanks,
Duy

I used your query and pointed to my query and the result is as expected - both key and text. I'm not sure what is different between our IO and mine.
SELECT [Measures].MEMBERS ON COLUMNS,
[0VENDOR].[LEVEL01].MEMBERS
PROPERTIES [0VENDOR].[20VENDOR] ON ROWS
FROM [MY QUERY]
then I tried to hardcode the value it only showed me just the text. I tried different ways to make it show either just the key or both - but couldnt figure out. And one more thing I confirm is that the display settings in Bex really DOESNT matter or taken into consideration my MDX.
SELECT [Measures].MEMBERS ON COLUMNS,
{[0VENDOR].[ABCD]} ON ROWS
FROM [MYQUERY]
let me know if were able to figure it out
Try the below statement and see what it does
SELECT [Measures].MEMBERS ON COLUMNS,
NON EMPTY [0NOTIFICATN__0NOT_TYPE].[LEVEL01].MEMBERS
DIMENSION PROPERTIES [0NOTIFICATN__0NOT_TYPE].[20NOTIFICATN__0NOT_TYPE] ON ROWS
FROM [YOURQUERY]
Edited by: voodi on Sep 28, 2010 3:08 PM

Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory?

Using Microsoft Exchange to access Gmail (Google Apps for Business) contacts, what is the best way to sync the Corporate Directory? For instance, we have 40 staff members and wish to populate each phone with the Gmail profile. Right now we have a third party Android app that does this and copies my contacts to each phone. This is problematic. Any solutions to populate a phone with email and phone contacts? Even it it requires double entry for me...thats ok.

Oh, I meant Leopard does do more than Tiger Server.
I don't know enough about Server, even less abut Syncing.
SL is to new, not enough time to iron out the kinks yet imho.
One day SL will be better than Leo, but...
I'd ask over in server...
http://discussions.apple.com/category.jspa?categoryID=96
Or perhaps Collaboration Services...
http://discussions.apple.com/forum.jspa?forumID=1352
They may even have a different opinion on SL.

Obiee 11.1.1.6.6 - analysis displays two dates instead of one prompted

Hi all,
my analysis somehow displays two dates instead of one prompted.
How can it be?
Tell me please what additional information should I include for you to help me.
obiee 11.1.1.6.6
Upd: prompt screenshots
http://marchello.ccx-grads.org/img/BI_prompt_001.png
http://marchello.ccx-grads.org/img/BI_prompt_002.png

This is from "Administration" -> "Manage Sessions" section of obiee
1) everything seems fine, WHERE clause shows correct date
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
   0 s_0,
   "VB"."VBIREP8"."AASYSDATE" s_1,
   "VB"."VBIREP8"."ADAY" s_2,
   "VB"."VBIREP8"."AMONTH" s_3,
   "VB"."VBIREP8"."ARCDATE" s_4,
   "VB"."VBIREP8"."AYEAR" s_5,
   "VB"."VBIREP8"."CONTRAGENTID" s_6,
   "VB"."VBIREP8"."CONTRAGENTNAME" s_7,
   "VB"."VBIREP8"."CREDITS" s_8,
   "VB"."VBIREP8"."DEPOSITARY" s_9,
   "VB"."VBIREP8"."DEPOSITS" s_10,
   "VB"."VBIREP8"."IDENTIFYCODE" s_11,
   "VB"."VBIREP8"."OVERDAY30" s_12,
   "VB"."VBIREP8"."RESTRUCTURED" s_13,
   "VB"."VBIREP8"."SEGMENT" s_14,
   "VB"."VBIREP8"."STATUS" s_15,
   "VB"."VBIREP8"."TOBO" s_16
FROM "VB"
WHERE
(CAST("VBIREP8"."ARCDATE" AS DATE) = date '2013-08-15')
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
2) and now attention, I press "next rows" arrow, my WHERE clause is simply ABSENT!
SET VARIABLE QUERY_SRC_CD='Report',SAW_SRC_PATH='/shared/VB/8.RB-213.BI.1';SELECT
   0 s_0,
   "VB"."VBIREP8"."AASYSDATE" s_1,
   "VB"."VBIREP8"."ADAY" s_2,
   "VB"."VBIREP8"."AMONTH" s_3,
   "VB"."VBIREP8"."ARCDATE" s_4,
   "VB"."VBIREP8"."AYEAR" s_5,
   "VB"."VBIREP8"."CONTRAGENTID" s_6,
   "VB"."VBIREP8"."CONTRAGENTNAME" s_7,
   "VB"."VBIREP8"."CREDITS" s_8,
   "VB"."VBIREP8"."DEPOSITARY" s_9,
   "VB"."VBIREP8"."DEPOSITS" s_10,
   "VB"."VBIREP8"."IDENTIFYCODE" s_11,
   "VB"."VBIREP8"."OVERDAY30" s_12,
   "VB"."VBIREP8"."RESTRUCTURED" s_13,
   "VB"."VBIREP8"."SEGMENT" s_14,
   "VB"."VBIREP8"."STATUS" s_15,
   "VB"."VBIREP8"."TOBO" s_16
FROM "VB"
ORDER BY 1, 3 ASC NULLS LAST, 4 ASC NULLS LAST, 6 ASC NULLS LAST, 5 ASC NULLS LAST, 7 ASC NULLS LAST, 8 ASC NULLS LAST, 12 ASC NULLS LAST, 15 ASC NULLS LAST, 16 ASC NULLS LAST, 9 ASC NULLS LAST, 14 ASC NULLS LAST, 13 ASC NULLS LAST, 11 ASC NULLS LAST, 10 ASC NULLS LAST, 17 ASC NULLS LAST, 2 ASC NULLS LAST
FETCH FIRST 100000001 ROWS ONLY
Sure, I receive another date (01.02.2013). Just one thing is strange here - why do I receive only one extra date (I should receive ALL dates in Oracle table when I perform query without any WHERE clause).

Nomadix displaying in "Frequent" instead of gmail/google?

Similar Messages

Maybe you are looking for