Nomenclature: Sequence vs Timeline ?

What's the difference between a Sequence and a Timeline?  Do they refer formally to different things, or are they the same?

The same.

Similar Messages

  • Unable to see video & audio tracks as shown in "Create a sequence or timeline and add audio"

    hi,
    I'm on the https://helpx.adobe.com/creative-cloud/learn/start/premiere.html page trying to work through the Create a sequence or timeline and add audio tutorial
    And cannot see the Video & Audio, as shown in the bottom right sub-window
    I'm using a trial version of Premier pro CC downloaded yesterday. On my mac mini running 10.9.2
    does anyone know how to fix this problem?
    thanks
    david
    I am able to hear the audio.
    Message was edited by: spottedsilvertabby

    Hi,
    Error 7 is when a router or the connection to the router is broken in some way.
    Some devices have features such as Denial Of Service protection (DoS) that cut a particular Internet Port when it thinks too much data is coming (Presuming it is an attack.)
    iChat 5 in Leopard is not capped by the System Preferences > Quicktime Streaming speed (which we used to suggest was set at 1.5Mbps)
    It now sees your whole Connection speed and your Upload may be much faster than this.
    Your Download is likely to be much faster. However iChat will tend to operate at the lower figure of your Upload.
    DoS features are threshold based.
    You may now be bumping in to this Threshold where you were not before.
    SPI (Stateful packet Inspection) does a different job but has the same effect when it is overloaded by the speed of the data.
    If you have either of these features, turn them Off (Disable them)
    7:25 PM Friday; October 2, 2009

  • Premiere Pro CC Crashing when Scrolling Through Sequence in Timeline - Audio Waveform Goes Blank First

    The description is in the title: Premiere Pro CC Crashing when Scrolling Through Sequence in Timeline - Audio Waveform Goes Blank First.
    Just started today, won't stop crashing now after a minute or two, and always does it when I scroll through the timeline of a sequence.  The audio waveform goes blank first.
    What is going on?
    Date/Time:  
    2014-10-22 12:16:16.078 -0400
    OS Version: 
    Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  E1BCDCD7-6284-3012-9151-FF85491060DA
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGBUS)
    Exception Codes: KERN_PROTECTION_FAILURE at 0x000000011d74b000
    VM Regions Near 0x11d74b000:
    VM_ALLOCATE       
    000000011d748000-000000011d74b000 [   12K] rw-/rwx SM=PRV 
    --> STACK GUARD       
    000000011d74b000-000000011d74c000 [
    4K] ---/rwx SM=NUL  stack guard for thread 4
    Stack             
    000000011d74c000-000000011d7ce000 [  520K] rw-/rwx SM=COW  thread 4
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread

    same problem of mine, as posted here:
    Crash when scrolling the timeline
    please find attached the crash report log, as requested.
    Process:         Adobe Premiere Pro CC 2014 [3770]
    Path:            /Applications/Adobe Premiere Pro CC 2014/Adobe Premiere Pro CC 2014.app/Contents/MacOS/Adobe Premiere Pro CC 2014
    Identifier:      com.adobe.AdobePremierePro
    Version:         8.2.0 (8.2.0)
    Code Type:       X86-64 (Native)
    Parent Process:  launchd [225]
    Responsible:     Adobe Premiere Pro CC 2014 [3770]
    User ID:         501
    Date/Time:       2014-12-22 16:33:25.725 +0100
    OS Version:      Mac OS X 10.9.5 (13F34)
    Report Version:  11
    Anonymous UUID:  DC744912-A135-A02B-C2D3-75C4CA421CDD
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x000000011a46a000
    VM Regions Near 0x11a46a000:
        VM_ALLOCATE            000000011a461000-000000011a46a000 [   36K] rw-/rwx SM=PRV
    -->
        VM_ALLOCATE            000000011a46d000-000000011a46e000 [    4K] rw-/rwx SM=PRV
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_BAD_ACCESS (SIGSEGV)
    Exception Codes: KERN_INVALID_ADDRESS at 0x000000011a46a000
    VM Regions Near 0x11a46a000:
    VM_ALLOCATE 000000011a461000-000000011a46a000 [   36K] rw-/rwx SM=PRV
    -->
    VM_ALLOCATE 000000011a46d000-000000011a46e000 [    4K] rw-/rwx SM=PRV
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   com.adobe.HandlerTimeline.framework 0x000000010c2b31f4 HandlerTimeline::TimelineMediaIconManager::DrawAudioWaveform(UIF::DC&, ASL::ParamRect<int> const&, ASL::ParamColor<RGBColor>, unsigned int, unsigned int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>, bool, std::vector<bool, std::allocator<bool> > const&) + 1620
    1   com.adobe.HandlerTimeline.framework 0x000000010c1dc4f5 HandlerTimeline::AudioTrackContentView::DrawWaveform(UIF::DC&, ASL::ParamRect<int> const&, ASL::ParamRect<int> const&, ASL::InterfaceRef<BE::ITrackItem, BE::ITrackItem>, unsigned int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>) + 2661
    2   com.adobe.HandlerTimeline.framework 0x000000010c1dafb3 HandlerTimeline::AudioTrackContentView::DrawTrackItemWaveform(ASL::InterfaceRef<BE::ITrac kItem, BE::ITrackItem>, dvamediatypes::TickTime const&, int, ASL::InterfaceRef<ASL::ASLUnknown, ASL::ASLUnknown>) + 2131
    3   com.adobe.HandlerTimeline.framework 0x000000010c2b447d HandlerTimeline::TimelineMediaIconManager::HandleWaveformNotification(int) + 429
    4   com.adobe.HandlerTimeline.framework 0x000000010c2b53b0 HandlerTimeline::AsyncRequestNotifier::ListenToMessage(ASL::Message const&) + 176
    5   com.adobe.ASLMessaging.framework 0x0000000100e1fb97 ASL::Broadcaster::BroadcastMessageInner(ASL::Broadcaster::ListenerRecord const&, ASL::Message const&) + 39
    6   com.adobe.Frontend.framework   0x000000010006b039 FE::ApplicationErrorManager::ExecuteFunctionWithTopLevelExceptionHandler(boost::function0 <int>) + 41
    7   com.adobe.ASLMessaging.framework 0x0000000100e1f71f ASL::Broadcaster::BroadcastMessage(ASL::Message const&) + 1695
    8   com.adobe.ASLMessaging.framework 0x0000000100e25e9a ASL::StationUtils::BroadcastMessage(dvacore::utility::ImmutableString const&, ASL::Message const&) + 42
    9   com.adobe.dvacore.framework   0x00000001003c763c boost::function0<void>::operator()() const + 28
    10  com.adobe.dvacore.framework   0x00000001003c8f4c dvacore::threads::(anonymous namespace)::FunctionQueue::ExecuteOneFunction(boost::shared_ptr<dvacore::threads::(anonym ous namespace)::FunctionQueue>, bool) + 124
    11  com.adobe.dvacore.framework   0x00000001003c9a4c boost::detail::function::void_function_obj_invoker0<boost::_bi::bind_t<bool, bool (*)(boost::shared_ptr<dvacore::threads::(anonymous namespace)::FunctionQueue>, bool), boost::_bi::list2<boost::_bi::value<boost::shared_ptr<dvacore::threads::(anonymous namespace)::FunctionQueue> >, boost::_bi::value<bool> > >, void>::invoke(boost::detail::function::function_buffer&) + 60
    12  com.adobe.dvacore.framework   0x00000001003c763c boost::function0<void>::operator()() const + 28
    13  com.adobe.dvacore.framework   0x00000001003c9b02 dvacore::threads::(anonymous namespace)::RunLoopAdaptor::Execute(__CFRunLoopTimer*, void*) + 18
    14  com.apple.CoreFoundation 0x00007fff8b7ae3e4 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
    15  com.apple.CoreFoundation 0x00007fff8b7adf1f __CFRunLoopDoTimer + 1151
    16  com.apple.CoreFoundation 0x00007fff8b81f5aa __CFRunLoopDoTimers + 298
    17  com.apple.CoreFoundation 0x00007fff8b7696a5 __CFRunLoopRun + 1525
    18  com.apple.CoreFoundation 0x00007fff8b768e75 CFRunLoopRunSpecific + 309
    19 com.apple.HIToolbox 0x00007fff93049a0d RunCurrentEventLoopInMode + 226
    20 com.apple.HIToolbox 0x00007fff93049685 ReceiveNextEventCommon + 173
    21  com.apple.HIToolbox 0x00007fff930495bc _BlockUntilNextEventMatchingListInModeWithFilter + 65
    22 com.apple.AppKit 0x00007fff8e47924e _DPSNextEvent + 1434
    23 com.apple.AppKit 0x00007fff8e47889b -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 122
    24 com.apple.AppKit 0x00007fff8e46c99c -[NSApplication run] + 553
    25  com.adobe.Frontend.framework   0x00000001000d302d FE::MacApplication::RunSelf() + 45
    26  com.adobe.Frontend.framework   0x0000000100047e98 FE::Application::Run(std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&) + 4328
    27  com.adobe.Frontend.framework   0x00000001000d4944 FE::AppMain(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int, void*) + 276
    28  com.adobe.Frontend.framework   0x00000001000dbbe5 FE::Run(ASL::ObjectPtr<ASL::Module, ASL::AtomicValue> const&, std::basic_string<unsigned short, std::char_traits<unsigned short>, dvacore::utility::SmallBlockAllocator::STLAllocator<unsigned short> > const&, int) + 581
    29  com.adobe.AdobePremierePro     0x00000001000018ac main + 508
      30 com.adobe.AdobePremierePro     0x00000001000016a4 start + 52

  • How do I drag video onto the program sequence and timeline

    when I drag video to the sequence or timeline windows there is a line through the indicator circle, probibited.  What can I do to fix this?

    You probably have to make a sequence first.
    Do this:
    If you still cannot drag the video to the timeline make sure the tracks are targeted/patched.
    Which version and build of Premiere are you on?

  • Source Sequence to Timeline Editing Bugs?

    Hi. I'm new to PP and I've run into a couple of issues when editing from a sequence loaded into the source viewer. (i.e KEM roll style editing) I'm using 7.0.1
    First problem - with the timeline set to Insert or Overwrite sequences as nests everything works fine (although i don't really see the purpose of working this way). Mostly you would want to "Insert or Overwrite as individual clips", but when i overwrite a clip the timeline ignores my in and out points which effectively means you can't do a three point edit. There's another strange bug that when you Insert the playhead jumps way off screen instead of staying at the end of the inserted clip.
    Second problem - "Replace with clip from Source Monitor" and "Replace with clip from Source Monitor, Match Frame" only replaces with the nested clip, is there no way to replace with the original clip? BTW, would be great if you could map a keyboard shortcut for this command as well?

    Thanks Jim.
    Some more info...
    Premiere Pro CC 7.0.1
    Mac OSX 10.7.5 - Macbook Pro
    Tried many kinds of footage, ProRes Quicktimes, H.264 Quicktimes etc
    It's very consistent behaviour, happens every time.

  • Is there a way to combine sequences in timeline?

    Hi
    I have prepared several sequences from source media. Is it possible to put them together into timeline one after another without going through the pain of entering the clips one by one? Thank you faruk.

    Bear in mind that if you copy the sequence from the browser, it will create a nest of that sequence.
    If you copy the media from within a timeline, it will paste the clips as they existed originally.
    K

  • Crashes with source sequences in timeline

    Hey Guys,
    I use the new feature of making my selects from a sequence as a source timeline.
    However I get crashes about 40% of the time when I close one of the sequences tabs.
    Also I get this message.
    then:
    Anyone experience this?
    I am running:
    Premiere pro v8.1 on an iMAC running OS X 10.9.5
    let me know,
    Thanks!
    - J

    Anyone???

  • Can anybody help me!! - shortcut for showing sequence in timeline

    Hello!!
    I know there is a hide shortcut for open a sequence in a timeline. Í can`t open a sequence
    in many of my  projects, by double clicking on the sequence. If I double click on a sequence it show up in the source monitor!!
    I have once open a sequence in the timeline by a shortcut. It was just luck when I tried many different shortcuts - I can`t remember
    the shortcut.
    IIs there anybody that know this!!

    Hello
    Very much thanks to you!!!
    I does work  In List View, a standard, non-modified double-click works
    I agree that this It's a bizarre inconsistency that it not work in Icon wiev
    You have safed my big filmprojekt!!
    Per

  • Jumps back to beginning after editing sequence in timeline?

    After I have done some edits in the timeline(within a work area) and I hit return it invariably jumps back to the very beginning of the timeline.
    Could you tell me please what I can do to solve this?
    Many Thanks

    FAQ:How do I stop the Current Time Indicator from looping to the beginning of a sequence?
    Cheers
    Eddie
    PremiereProPedia   (
    RSS feed)
    - Over 300 frequently answered questions
    - Over 250 free tutorials
    - Maintained by editors like
    you
    Forum FAQ

  • Encore adding gaps between sequences in timeline

    I have a project with 11 dynamically linked PPro sequences in the Encore timeline. When I reopen the project, Encore has placed 3-frame gaps between some of the sequences. Here's my workflow:
    1. I created an Encore project with the DL sequences, created a menu, and built a DVD image file.
    2. Burned the DVD in Toast, watched it, made notes.
    3. Edited audio in several reels in Audition, updated the Premiere sequences with the new audio.
    4. Opened the Encore project -- it asked if I wished to re-import the DL sequences that had changed on the DL server -- Yes.
    5. Now Encore seems to have trimmed the tail of the unchanged sequences by 3 frames, but only the video.
    Even though Encore gives be a bi-directional trim icon at the tail, indicating that I should be able to trim it in either direction, it won't add those frames back, at least not on all the sequences -- some of the sequences do let me add the frames back.
    When I do trim the previous sequence, it snaps to the nearest I-frame. Apparently, it's trimming the previous sequence to the last I-frame it transcoded instead of leaving it trimmed to the last frame in the sequence.
    How can I get around this?

    Excellent. I don't understand how Encore could ask you if you wanted to reimport changed sequences if it was not reverting to original. I now assume that Encore does not address the possibility that you might have multiple sequences on one timeline when it does this process, and does not revert all (or any?) and produced the gaps.
    So, in any event, your multiple DL sequences on one timeline worked, once you reverted and adjusted. The alternative to what you did would be to answer "no" to reimporting, then revert (which would pull in the newer version). If it was not actual changes that contributed to the gaps, that might avoid them. But I suspect you would still have to adjust the sequences on the original timeline.

  • Sequence file in Browser does not match Sequence in Timeline

    I have constructed a sequence in the Timeline with the name of The Cafe. A Sequence appears in the Browser with the same name, but it contains a 20 second clip and none of the other material that is displayed in the sequence in the Timeline with the identical name. I need to know how to convert the sequence in the Timeline to a Sequence in the Browser for a final asembly and edit. Any help would be greately appreciated. Many thanks.

    If you didn't do it yet, you should change the browser view to View as List (View/Browser Items/As List). This will list all possible parameters associated with all your items in the browser and namely with your sequence The Cafe.
    Now you can read its Duration, In and Out positions (these 2 will be likely "not set") and many other infos.
    What is its Duration ? it should be exactly 1:35:04 as you read in the timeline.
    In which field of the browser you read 21 associated with The Cafe sequence ?
    The Type field contains "Sequence" as it is supposed to be ? (if not yet visible: 1st enlarge the browser window, 2nd right click on any field label and select the Type field from the contextual menu - a new colomn will appear with Types)
    With these infos it'll be easier to find what to do.
    Piero

  • No audio heard from sequence during timeline playback

    I am a new user to PPro CS 5.5, just opening my first project.
    I have captured a few clips and brought them into the project. Previewing them in the source window, I see the video track play and hear the audio track.
    I moved one of the clips onto the timeline and attempted to view it. I see the video playing but no audio is heard.
    I opened the clip in Audition. the audio played there, no problem
    I am sure there must be a configuration parameter to set but I cannot find it.
    Can someone suggest where I can look?
    Thank you

    Examining the source window playback settings, I see that realtime Playback has no external device selected in the drop down and Desktop audio is selected with the button. External Device is grayed out.
    With these settings, I hear the audio track.
    Examining the editing window playback settings, I see something very different.
    The menu box is titled Blackmagic playback settings.
    The only option entry in the menu box is: a choiceto "Turn off Dropped frame Warning"
    I have a Blackmagic Intensity Pro card installed on my PC and used it to capture my video clip on mini-DV tape played from my Sony GV-HD700 videocasette.
    Why am I seeing this BM menu reference only on the editing window? Is this the indication of my problem?
    I went back to defining another sequence and the menu choice opened with the same path, as my previous first time at this, to a Blackmagic selection. I changed to a HDV 1080i selection for this 2nd sequence. When I dropped the clip into the 2nd sequence, presto, the sound was there.
    Now I am wondering what is the blackmagic option for?
    What is the difference between the source and editing window parameters?
    That is left to when I have more time to dig into it.
    Thanks again

  • Update sequence in timeline?

    Im not sure how to express myself but I will give it a try.
    I have a sequence with an edited movie and I have taken that sequence and put it in another timeline to get it as one clip because I am making a short trailer out of it.
    Now here is my dilema, I have made changes in my first sequence timeline buth the changes does not follow in the new timeline where that sequence is put, is there any way to refresh it?
    Hope you understand what I mean, I'm on FCP 4.5

    hello... you need to dump and refresh your render files.
    try this...
    control+click on the nested sequence (the sequence now in your new timeline as 'one clip') and select 'Remove attributes' from the drop down menu... DON'T check any of the boxes, but just click on the OK button.
    this should kick-start your nested sequence to be updated.

  • Sequences and timeline lost on re-start of CC-2014

    Hi,
    I'm running the latest version of Premiere (CC2014) on an iMac.
    This could be a change since the last update.
    I save a project and close it.  When I reopen it, an entirely different set of sequences is open on the timeline window.
    Always, in the past, the program would open looking exactly like it did at the last save.
    anyone know what's with this?
    thanks!

    ... also another thing that still happens between Premiere and the Media Encoder, is that when you send jobs to the media encoder, via export / queue ... the media encoder "takes over" either so much CPU or so much memory that Premiere is rendered unuseable during the process, and inevitably crashes Premiere, even when ME is quit.
    Bad coding, people....

  • DISAPPEARANCE OF 3/4 OF A TIMELINE AND ITS SEQUENCE

    I made a routine export to QuickTime of my 49 min. video, due for a screening to he committee in six hours, and I was shocked to see that only 1/4th of my timeline and sequence was there! The missing material was not in the sequence, the timeline, nor it the exported Quicktime, done twice. Two scattered images remain from about 35 min. into the program, on upper layers, just a few seconds of material. My newest AutoSave file was also just like this, but yesterday's file is okay. Of course, I did a ton of detailed work since then, which is just gone. I am devastated, as I must present this, for the first time, to the group. That mostly blank timeline is a real scare. Could someone please help me??!! Must I go back to the past and redo all that work?? At one point, it said 112 files are offline, and then it did not say that again, only 5, and they aren't even in the project anyway; I checked this out. Is this project corrupt? I repaired permissions right away, and that had no effect.
    PowerMac G4, Dual 1.42 GHz, 2 GB RAM, 4 internal 120 MB hard drives, 1 TB exter   Mac OS X (10.4.5)   2 22" CRT displays, Airport network, etc.
    PowerMac G4, Dual 1.42 GHz, 2 GB RAM, 4 internal 120 MB hard drives, 1 TB exter   Mac OS X (10.4.5)   2 displays, Airport network, etc.

    hi Brainnytes
    I made a routine export to QuickTime of my 49 min. video, due for a screening to he committee in six hours, and I was shocked to see that only 1/4th of my timeline and sequence was there! The missing material was not in the sequence, the timeline, nor it the exported Quicktime, done twice. Two scattered images remain from about 35 min. into the program, on upper layers, just a few seconds of material.
    its pretty hard to say what has happened here ...
    my gut instinct is some user error. I appreciate its something we don't like to hear but what can I say? Its easier than you might think to inadvertently delete things and not even notice .... for example you may have previously selected something in the timeline then scrolled it out of sight, then later when you thought you were deleting a browser clip, or filter in the viewer, in fact the timeline was active and you deleted a clip you couldn't even see ... stanger things have happened. sad but true.
    My newest AutoSave file was also just like this, but yesterday's file is okay. Of course, I did a ton of detailed work since then, which is just gone. I am devastated ...
    we learn by our mistakes. what setting do you have your AutoSave set to? you should set it to he maximum amount that you feel you can aford to lose. personally, i don't like to lose more than 5 or 10 minutes of work.
    Must I go back to the past and redo all that work??
    if you don't have a backup or autosave vrsion then I'm afraid you must.
    i'm truly sorry, beleive me ... been there, done that
    good luck
    Andy

Maybe you are looking for