Nomination Screen Item events locked

Dear All,
I have a requirement in the Nomination screen if The ticket is created the item status is complete and that makes my events/text tab Events uneditable.
I want to control it even on completion it should be changeable, I heard it can be done with BADI OIJ_TKT but am unable to get it.
If any help would be appreciated.

Please try to use these badis:
Nomination Event Validation Add-In . OIJ_NOMHD_VALIDATION
OIJ_LB_USER_FIELDS
OIJ_LT_ACCOUNTING
OIJ_NOMEV_VALIDATION
I hope this may helpfull.
Thank you,
Thanks,
AMS

Similar Messages

Hi everyone, my Iphone 3gs cannot display the screen item once you lock it and and you wanna unlock it back.

Hi everyone, my Iphone 3gs cannot display the screen item once you lock it and and you wanna unlock it back.

Since you are still under Warranty, make appointment with Apple Genius and take iPhone to Apple for resolution of those problems.

Nomination Line Item complete status set automatically

Can you please point me to the config area to control the Nomination line item status completion.
Recently we have upgraded to service pack 12 and after that when we actualize the ticket, system is automatically setting nomination line item status as complete and thus blocking us from updating the event text details .
Can you please let me know where is the config for controlling the completion status for nomination line item
Thanks
Giri

Hi ,
it is actually set automatically when the ticket qty is within the defined nom tolerance.
So check the tolerance settings on the nom. There is no other config here. You can influence the behaviour with BAdI implementations (OIJ_TKT)
Cheers ML

Write information for event lock field Itemcode

Hi, everybody.
i want to see the filed in the table that store information of Item
When i create a PO or saleorder,... and i use Item X1. This Item is enable =true. It mean the field Itemcode in window Item master data is locked, it can not change.
Can you tell me database will write this event in what table.

I don't quite follow your question. What do you mean by "Item is enable =true"
Whenever you create a transaction for an Item the ItemCode greys out and cannot be changed or Deleted.
When you create PO or SO, SBO sees a Commited or Ordered Quantity for Item and lock ItemCode from changing.
You can run a Trace using SQL Profiler to see which are tables are being updated.
Suda

Tabbed selection screen with AT SELECTION-SCREEN ON events does not work

I have a selection screen with 3 tabs fields on each tab have AT SELECTION-SCREEN ON field events.
If you are on tab 1 and select a variant that populates fields on all tabs and then click the execute button ABAP does not seem to recognize that the field has changed when it executes AT SELECTION-SCREEN ON field event unless you physically go to each tab.
I can work around this by:
1) moving all of the AT SELECTION-SCREEN ON field events in a AT SELECTION-SCREEN OUTPUT event. This is not efficient and it potentially opens me up to other problems.
2) changing the selection screen to remove the tabs and have all of the fields on 1 screen. This makes for a very long screen.
Is there any way to have ABAP check all tabs?
Thanks,
Jerry

I finally got it to start. Let it sit and tried and it wouldn't but then I tried again and it did. How do I blow the dust out? I think it must be something with the heat since that comes up alot.
I will do it, I love my Mac.

Getting the correct userid in a afterproperties in a item event receiver

HI,
am writing a custom item event receiver and i am trying to read from a user/group column. and when i am using afterproperties to get the getitembyid() for a user, am getting different values on different times.
yesterday when i accessed the same, i am getting the correct user id i mean if its "in\john.mith " am getting the values john.smith.
but today when i debugged, i am not getting the john.smith value instead it pulled the fully qualified value - i eman - along with authentication - i:#w0/.....kind of.
its strange that sometiems its working fine and sometimes the same code behaves in a different way.
can ansyone please provide any hint what exactly going on and how can i get a correct id when i use afterproperties.
help is appreciated!

Hi,
According to your description, the value of the User field in the AfterProperties not always the same.
As you said, the value got changed today when you debug your event receiver, is there any change in your environment recently?
A possible reason might be that the authentication method has been changed.
There is a test in Naim’s blog about the different value of User filed in an Event Receiver when in different authentication mode:
http://naimmurati.wordpress.com/2014/07/25/user-field-in-event-receivers-when-using-claims-based-authentication-and-classic-mode-authentication/
How to determine the Authentication mode of a web application:
http://blogs.msdn.com/b/psssql/archive/2011/02/22/sharepoint-adventures-how-to-identify-if-you-are-using-claims-authentication.aspx
Thus, a possible workaround to get the user name from a User field is that you can use
properties.ListItem["UserField"] which will return same result whatever the authentication mode would be.
Best regards
Patrick Liang
TechNet Community Support

At Selection-screen output event

Hi
can any one give me some examples for at selection-screen output event
with regards
nagaraj
Moderator message: please search for available information/documentation.
Edited by: Thomas Zloch on Nov 8, 2011 12:13 PM

Thanks Benedict
Creating Module %_S_KOSTL and write our own logic to bring the parameter id value of Cost center from User profiles is NOT possible in program RM06BF00, screen 1000.
We can do that in Copied program of RM06BF00 ..which is the very last option.
I wanted to do that with User-exits or BADI or Enhancement spot etc...which i Couldn't do it so far...
The alternate might be Zprog and Ztcode or an SNOTE..
if you ALL think its NOT possible with User-exits or BADI or Enhancement spot or SNOTE etc..Then i will close this Thread...
Please let me know ASAP...
Thanks
Govi

AT SELECTION-SCREEN OUTPUT event of standard tcode

Hi
I need User-exit or BADI or Enhancment spot in AT SELECTION-SCREEN OUTPUT event of ME55.
I need to populate the default cost center into the cost center field from user parameters with pid 'KOS' when i execute the ME55.
I maintained the PID in user parameters but the value is not getting populated in ME55.
Please let me know
Govi

Thanks Benedict
Creating Module %_S_KOSTL and write our own logic to bring the parameter id value of Cost center from User profiles is NOT possible in program RM06BF00, screen 1000.
We can do that in Copied program of RM06BF00 ..which is the very last option.
I wanted to do that with User-exits or BADI or Enhancement spot etc...which i Couldn't do it so far...
The alternate might be Zprog and Ztcode or an SNOTE..
if you ALL think its NOT possible with User-exits or BADI or Enhancement spot or SNOTE etc..Then i will close this Thread...
Please let me know ASAP...
Thanks
Govi

I dropped my iphone (not from a great height) and now it won't turn on however when I plug it in the white apple shows on my screen. My lock button has been broken for awhile so I can't even try switch it on!

What can I do? I dropped my iphone (not from a great height) and now it won't turn on however when I plug it in the white apple shows on my screen. My lock button has been broken for awhile so I can't even try switch it on!

Once you have a proven, working Charger... Charge the Device for a couple of hours. Then try to turn it on.
If no joy...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If the issue persists...
Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

My colleague recently synched his phone and now has a full keyboard on the lock screen. My lock screen keypad is set up like phone keys (alphanumeric). He's wondering why his is different, and he also now cannot unlock it. Anyone have this happen?

My colleague recently synched his phone and now has a full keyboard on the lock screen. My lock screen keypad is set up like phone keys (alphanumeric). He's wondering why his is different, and he also now cannot unlock it. Anyone have this happen? He came to me yesterday and I noticed that his iPhone 4 still had old software (version in the 4's), so I advised him that he needed to synch it up to get the iOS 5.1.1 version. He synched and now can't get back in. He was entering his passcode on the lock screen (which wasn't taking) and I noted to him that his screen didn't look like mine. Anyone know how to fix this issue, or does he have to do a full restore?

He has set up a complex password instead of a simple passcode for his phone. If he doesn't know what it is, he'll have to restore. There is no way around a forgotten passcode.

FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065

Please help....This error is comming when opening the form. The form is running on oracle 11g 64bits web logic.
"FRM-40735 WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-065"

Welcome to OTN
Before posting on this forum please read
FRM-40735: WHEN-CUSTOM-ITEM-EVENT trigger raised unhandled exception ORA-06502.
you'll get some hint here
Oracle/PLSQL: ORA-06502 Error

Open Items Are Locked in a Payment Proposal

Dear experts,
Please isn't there an easier way to found out in which proposal run an open item is locked without displaying the database table REGUS via the transaction code SE16? I mean, isn't there a kind of transaction code users can run by themselves to get this answer?
Best regards,
Marcos.

HI, Murali. N.
The problem I face is when I try, for instance, to clear a vendor account via transaction code F-44. If the open item is locked in a payment proposal run, it won't be available in F-44. I'd like to know if there's a way to identify which in proposal run the item is locked without displaying the database table REGUS.
Best regards,
Marcos.

Password prompt after screen saver or lock screen

I am running Yosemite on two Macs – an early-2008 MBP 15" and a mid-2010 MBP 13". Both are configured for password after screen saver or when waking up. I have hot corners configured to enable screen saver (lower left), lock screen (upper right), disable screen saver (lower right). On awakening from either screen saver or lock screen, the 15" requests the password in a screen similar to the login after boot or switch user screen – the fullscreen, blurry background, prompt in the center. The 13" prompts for a password in an ordinary modal dialogue window that includes a lock icon and displays on a black background. The 13" has an external monitor attached, but the behavior is the same if it's disconnected. Both systems have one user, and identical settings in Users and Groups. The behavior is the same whether the Guest user is enabled or disabled.
I can't find any settings to account for the difference, even obscure ones shown in Onyx. Any ideas as to why the password prompt is handled differently in these two cases? Thanks in advance...

Hi Betty,
http://www.cmu.edu/computing/doc/security/mac/screensaver/index.html

How do you turn off larger dynamic type on the iphone4 when your screen orientation is locked (vertically)?

So I have the iphone 4 with the latests update ios7.
So I went on settings > general > accessibility > larger type.
And I clicked "on" for "larger dynamic type"
Now my font is so big I can't even see apps that I have and such
I want to turn it "off" but my screen orientation is locked! (I can't move my phone horizontally) I think if I can move my phone horizontally I'll be able to see the on/off button for larger dynamic type.
I tried sliding the bottom upwards to turn off screen lock orientation but it's not on my screen because my font is set to a really big size that the "screen orientation lock button" didn't make it to the screen

Turning on Dynamic type and increasing it shold not have that effect.
Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Ipad mini did update and now screen rotation is locked.. can this be fixed ?

I did and update for ipad mini and now the screen rotation is locked. I am seeing other posts about this update and am afraid this will be step one in more issues. Afraid to do the upgrade on my mac. Last time I had to take it in to the genius bar to have them fix it. Whaat? Any help would be appreciated. Thanks/

See the following for info on the Side Switch settings that can either control Orientation Lock (screen rotation) or Audio Mute.
*iPad side switch settings link:
http://support.apple.com/kb/HT4085

Nomination Screen Item events locked

Similar Messages

Maybe you are looking for