Non-Admin not being shown update button on XP

Non-Admin users on XP are not being shown the option to trigger an update.
The mozilla update service is installed but as normal users aren't able to start the update process it never gets as far as starting it.
When a new update is available a link to the download page is shown in the About box rather than a button to start the update.

That is good. It would be better if that were the case with a standard account on Mac OS. I can no longer trust that button because it will start downloading an update if there is one, even though I disabled Firefox updates completely.

Similar Messages

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Why are clipping adjustments in the basic panel not being saved, updated or shown in the histogram? I am using LR 5.7 on a MAC OSX 10.8 etc.

Here is more information and hopefully a better explanation. My version of
LR-5.7 (OS X 10.8.5) apparently does not save the .NEF (Nikon RAW) edits
done in the basic module. That means that I can correct exposure,
highlights, shadows etc. but once I go to another picture and returned to
the edited one the histogram (on the edited photo) and specifically the
clipping triangles are white or some other color. This is normally suppose
to indicate that some channel or all channels are clipped in the
highlight/shadow areas. If I adjust any slider in the Basic panel even as
little as one +/- value or press the J-key, the histogram will now show the
original edit. Moving on to another photo and then returning to to
previously edited one and again the edits are "not saved" and I have to hit
the J-key or adjust a slider to see the previously edited information
reflected in the histogram.
This is especially frustrating for fours reasons. If I have edited a shoot
and return to it I cannot see from the clipping information whether the
original edit was correct and of course I might re-edit it (to some now
incorrect value). This brings up the second issue synchronization. I can't
rely on it because if I go back to fine tune a specific image in the batch
the triangles are white or some other color for that and every image. I have
to hit the J-key to show/hide clipping or the back slash key to see
before/after previews. This is the third issue which is very time consuming
and inefficient regarding my workflow. The forth issue is that I have
noticed that normally when an image is saved in PS, LR adds a copy of the
saved version to its catalogue. I have noticed that the PS to LR saves are
all wrong in terms of exposure (they are much lighter in tone) than the
original LR edit and the PS edit on my screen. If I check the PS to LR photo
in LR I notice that the Basic panel values have been changed and that I have
to sync the image with the originally edited RAW/NEF LR file to get it to
look the same.
Note 1). I am using an Apple cinema display and a calibrated Eizo ColorEdge
monitor to view my NEF files. I have reverted back to using LR 4 however I
am not sure if I should expect compatibility problems with Camera Raw 7.4 in
LR 4 vs. Camera Raw 8.6 in LR 5.
Note 2.) I am going to do an import converting everything to .dng to see if
this is a work around.
Note 3). I would be interested in knowing if this issue is related to the PS
RAW engine ver. 8.6, the Adobe created NEF calibrations or LR 5.
Note 4). I have duplicated this issue in OS X 10.8.5, OS X 9.xx and OS X
10.10.1
Hopefully someone else has noticed this problem. Any shared information
would be valuable. Thanks for the reply.

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown

In My Shared View the inbox tabs like My Tasks , Initiated Tasks are not being shown :
How to display the tabs in shared views also.
I just wanted to created one shared view that will look like Inbox but filter data for State = 'Completed'

Please update me if you can find any way to achieve this in BPM workspace

New Leave Request not being shown in UWL

Hi ,
I have an issue in which when manager tries to approve a leave request from UWL ,in the Pop up i,e in Request Waiting for approval" table the latest requests are shown but the same request are not being shown in the UWL.
I checked in SWI5 for the user and whatever leave requests are shown in popup are there for the user but the same is not updated in UWL.The user has refreshed the UWL but still it didnt show the new leave requests
I dont want to reregister the webflowconnector in UWL configuration as we generally use reregister to register a new task in the UWL .
Can someone please help me in resolving the issue.
Thanks,
Satish Kumar

Hi Siddharth,
Thanks for your reply.
DYNPARAM parameter value as suggested in the note 1140959 is already maintained against the tasks TS12300097 ,TS12300116.
we have done Refresh from the UWL iview but still its not showing the latest Leave Requests but it is coming in the popup window when one of the existing leave requests in UWL is selected.
Thanks,
Satish Kumar

PDF Export Options not being Shown

Need to export to pdf again. Last export was for only 6 pages, as a test. Now want to export the entire document. However, only 6 pages are created in the export. No options to revise the pages, are presented.
The iD app is acting strangely, in that many other options are not being shown. Also, on loading a document, there are notes about hyphenation and missing LILO. Beginning to believe I need to reinstall.
Pleae advise best course of action at this point.

before you reinstall, see if trashing the prefs helps. See Replace Your Preferences

Planned Order for a Product not being shown

Hi Experts!!
I am an ABAPer and I am new to SAP APO. We are now working on /SAPAPO/PPT1. When clicked on some quantity, all the planned orders existing for that product are being shown with respective quantities. Now, I am trying to create a new planned order for a product through FM BAPI_MOSRVAPS_SAVEMULTI3 by splitting the quantity among the receipts. I have gone through several posts and have written the logic. But the newly created planned order is not being shown in /SAPAPO/PPT1. I can't find it anywhere. Am I doing something wrong here?
Here I explain it with an example. I have an aggregated entry for the month of June with quantity 3000, which is already split under receipts 1234 and 1235 as 1000 and 2000 EA respectively. Now, I need to split it as 1000 EA for each planned order and hence am creating a new plord. I am using same FM for changing plords as well with quantities as 1000. So, now both the receipts are being shown with quantity 1000 and the aggregated value as 2000... and the newly created one is missing. But I need the new one to be displayed and the aggregated should be 3000. Why is this happening? Am I missing something?
I already have posted a query that is related to this total requirement. Change Receipt Quantity for Planned Order in LiveCache . This has the first part of the total requirement. Just provided for extra info, but not related to this issue however.
Please help me out. Your help is highly appreciated. Thanks a lot!!

Hi Srinivas,
With prior experience, i am sure that the BAPI SAVEMULTI3 can be used for Creation & Change.
I dont think,the FM's which you are using, are recommended by SAP. So , try to use BAPI most of the time,as it ensure data consistency.
As you told, order is not flown to ECC, but visible in APO, i would suggest you to check the importing parameters of the bapi, like EVENT CONTROL ( should be '1' ).
and COMMIT_CONTROL(should be 'E').
Also, check your queues after execution of bapi. you should find your change pointer in the inbound queue of R/3 System. Do let me know if you still stuck.
Thanks,
Santosh KB.

TS1468 Not being shown in recently release album

I recently submitted one album. This is not being shown in recently release album. What we need to do my album to be displayed in iTunes when user selects recently released albums.

Hi Bhakti,
The operation 01 is create, this means the mapping records are stuck in a create operation, i.e. something stopped the original mapping records creation and left an inconsistency in the catalog mapping tables.
I would suggest the following:
De-assign the mapping for the affected categories in the catalog authoring tool, once de-assigned, also execute the 'Map Content' selection and save/exit.
Then run report /CCM/CLEANUP_MAPPING in test mode to check for orphaned items or invalid mapping entries. If inconsistencies are found in test mode, run this again with the test flag removed.
Finally - re-map the categories again and perform content mapping. The items should then exist in the procurement catalog.

How do I resolve the issue of a 2nd generation iPod touch not being shown on iTunes 11.4?

2nd generation iPod not being shown on iTunes 11.4
How do I resolve this issue? I have tried reinstalling after uninstalling it, nothing has worked for me any advice?

Well, go ahead and try every port, make sure to clean out the port with a q-tip, to make sure no dust is blocking the ports.
Then enter DFU, if iTunes doesnt recoginze it when your in DFU, that means you charging input is damadged.
Hope this help

Sent E-mails not being shown

Hi, I have a MBA and since yesterday all the e-mails that I have sent are not being shown in the sent folder. I sent one to myself and I got it so it must be working but how can I see them again after I sent them? Oh and the other problem is that search function does not work the way it used to. When I typed in one word it would show me all e-mails that had that word in them including the ones from e-mail adresses with which had the word in the adress.
Does anyone know how to get this to work?
That would be great! Thanks!
P.S.: English is not my native language, sorry for mistakes

Hi McGrey24,
A couple of important questions to get us on the right track.
1.) What type of email account are you using? Who's the service provider?
2.) What are you using to search? The Spotlight feature inside mail or the OS-wide Spotlight search?
The Mail search requires a little tweaking, by default it doesn't give you access to your entire account just specific mailboxes. There are ways to control if you want to search all mailboxes or if you're looking for the text string as the subject (or just content).

HTML file is not being shown properly in the JEditorPane

Hi,
I am using JEditorPane to display an HTML file from the local disk. This HTML file contains the html tables. Now when this file is getting displayed in the JEditorPane, one top row grid is not being displayed in the editor pane. content of the row is there...but the column grid is missing. All other rows and columns are being shown but the first row-column grid which contains the heading for column.
Also when I m printing the content of this JEditorPane using Java Print API then no grid is being printed on the paper. content is coming properly but no table grids. when i have taken the print out of the original html file from the browser then table grids are being printed out properly.
Please do help me out in showing the HTML file in the JEditorPane properly and printing the same.
Many Thanks,
gshankar

Hi,
JEditorPane renders HTML with many limitations.
You can use JDIC for the same. refer: jdic.dev.java.net
But JDIC does not work on windows 98.
Anand

HT4623 HI, i am using I POD 3rd generatin with OS 3.1.3. I am not able to update the new IOS and i could not found the update button in my POD. Pleaese help me how do that. regards

Dear Friends,
I am using IPOD touch 3rd generation with OS 3.1.3 (7E18) (Model MA623LL), i am not able to upgrade the IOS. My IPOD does not have the software update button.
Please help me how to upgrade the IOS for this version i could not able to download the games and new features.
Please guide me.
regards
Nagaraju T
[email protected]

You iPod, model MA623LL , is a 1G iPod and those can only go to iOS 3.1.3
Identifying iPod models

Rectangle is not being shown in 10g Report But text is shown...

I created a new report manually using 10g reports.....i just put one text and one rectangle....Both are being shown when i run with paper design option in report builder itself......But when i run this through url....Only text is being show not rectancle...........
Why ........Please help me..

you need to configure your application Server if calling from an application server
if calling from the same machine then configure your OC4J container properties in the config files located in server folder of your ORACLE_HOME

Not being offered update from Build 10041

Despite trying both Fast and Slow settings and checking at least once per day for several weeks, I am not being offereda ny update from 10041.
Additionally, I would like to get any update as an ISO so that I can relocate testing from a laptop to a desktop machine that is configured with dual scanners and printers directly attached.
Suggestions please as to what I should do.
Thanks

Despite trying both Fast and Slow settings and checking at least once per day for several weeks, I am not being offereda ny update from 10041.
Additionally, I would like to get any update as an ISO so that I can relocate testing from a laptop to a desktop machine that is configured with dual scanners and printers directly attached.
Suggestions please as to what I should do.
Thanks
Just today a new build 10074 has been released.
Its ISO is also available to download.
http://windows.microsoft.com/en-us/windows/preview-iso-update-1504

Roma - Torino not being shown anymore?

This game was advertised as being live on BT Sport 2 on Tuesday night, now it has been removed and replaced by MotoGP and UFC filler shows. What gives?

Well it is still being shown but now it is listed as
Tuesday March 25: Roma v Torino - 7.45pm, BT Sport website and app
I guess with Scottish & German football being shown live on BT Sport 1 & EPSN at the same time they decided to provide a non football alternative.
There a couple of highllight programs the next day on the TV service.

Non-Admin not being shown update button on XP

Similar Messages

Maybe you are looking for