Non Airport wireless router & shared usb printer w/ AX

I think this is possible, I hope so. This Sunday I hope to set up 3 photo viewing stations at a soccer tournament I will be covering with many other photographers. We upload our images to Exposure Manager nightly. The center has wireless internet we can access to bring up the website on laptops running a kiosk browser. The viewers can order prints online via credit card. I would like the multiple viewing stations to be able to print out receipts to a shared laser printer (Brother 2040). The printer works fine connected to an Airport Extreme or Express. The dilemma is the laptops must be connected to the sport centers wireless network for internet access and I don't see a way to connect to both Airport and the sports centers router at the same time. If the airport was able to pick up the wireless internet connection (wirelessly) the system would work perfectly. Any ideas?? Thanks!

In Airport Admin (for the Extreme or Espress with the printer), turn off "Distribute IP Addresses." This makes the Extreme/Express a wireless access point with the Other router remaining as the master - all computers (even if they try connecting through the AEX) are then in the same network (and can see the printer). (You can also change the broadcast channel of the AEX.)

Similar Messages

  • Will a NAS Plugged into a Non-Airport Wireless Router work with TM?

    Will a NAS Plugged into a Non-Airport Wireless-N Router work with TM?
    I'm looking for a backup solution for my new MacBook Air and I don't want to spend $200 extra for a Time Capsule when an NAS would do the job.
    Any guidance would be appreciated.

    No. TM will not backup to any NAS other than Time Capsule

  • Best non-Airport Wireless Router

    Hi folks.
    Have a need for a brand new wireless router for an iPod 3, MacBook Air, and a potential iPhone 6 or maybe a 5C.  Airport is $99, and she's cheap, so I'm looking for some great alternatives.  Over the years I've had good and bad versions, and I'm soliciting experience from others for recommendations on other makes/models. 
    Thanks in advance.
    Cheers

    After the death of my AirPort about 18 months ago I decided on a NetGear dual band router which was about $70 less expensive than the Airport Exteme and since I'm a tech there was no reason not to. This is the router recommended as second best at the shop where I work part time. The first thing I was reminded of after my purchase is how 'fun' it is to configure third party routers. It took me three attempts to get it all configured the way I wanted and each reboot of the router took nearly 5 minutes. I'll not regale you with the hardware/firmware issues I dealt with over the next year, it was most un-Apple like. When the router died just outside of the warranty period I paid for the AEBS and frankly I wish I hadn't tried to save the $70. The fact that Apple updates the AEBS firmware and lets the user know in and of itself makes the extra $$$ worth it.

  • I have an airport extreme with a USB printer attached (non-airprint).  Can i print from my ipad?

    I have an airport extreme with a USB printer attached, it is a non airprint printer.
    I can print via my network from my desktop but I want to know if i can print from my ipad 2 and ipad 1

    Printing from an iPad or iPhone
    To print directly from an iPad you need an AirPrint - enabled printer on the same wireless network as the iPad. All AirPrint printers are wireless but not all wireless printers are AirPrint-enabled.
    If you do not have an AirPrint printer, a number of workarounds exist that enable the use of any printer you normally use, even older ones that may predate AirPrint by decades. Search for the following products:
    handyPrint (Mac only, donation-supported)
    Printopia (Mac only, $19.95 with free trial)
    These are utilities you install on the Mac you normally use for printing, enabling it to act as an AirPrint print server. The Mac must be "on" but may be asleep for them to work. The iPad needs nothing else, no iOS apps need to be installed and no configuration is necessary. If your computer can print, so can the iPad, using one of these utilities on your Mac.
    Equivalent utilities may exist for PCs but I have no experience with them - I suggest https://www.collobos.com
    You can also buy this standalone hardware print server, bypassing the need for a computer altogether:
    http://www.lantronix.com/it-management/xprintserver/xprintserver.html
    Otherwise you will need to buy an AirPrint printer or multifunction device.

  • Can a Shared USB Printer be an IP Printer too?

    Apologies if this is a FAQ that was already answered somewhere else, I did look but couldn't find the answer here.
    I have a local LAN with addresses 192.168.1.x. Some clients are static IP addresses like .101, .102, and DHCP is also served up to new clients in the range .200 and up, by a Belkin wireless router. The router is attached to Roadrunner so has a WAN address like 65.xx.xx.xx.
    On this network is an imac G5 (static local IP) running 10.4.8. Physically attached to this by USB is a Shared USB Printer (Epson 6600 AIO). Shared printing within the local network works just fine from any client.
    So now the question. Is there a way to set up IP printing so that this printer can be used remotely? Presumably would have to know the WAN address and open a port in the router somehow. Hope the question is clear, let me know if I need to provide additional info.
    Thanks for your advice

    So now the question. Is there a way to set up IP
    printing so that this printer can be used remotely?
    Presumably would have to know the WAN address and
    open a port in the router somehow.
    Yes, you are on the right track in your thinking.
    I have not tried printing from the WAN, but for web hosting, ftp serving I have enabled port forwarding ont the router to the mac. For printing I think you need to have port 631 open and forwarded from the router to the Mac. Your particular router should have a web-based configuration setting, where you use a web browser and log into the router LAN IP.
    http://www.whatismyip.com will tell you what your public WAN IP is, from your Mac, which may change occasionally if you have a typical dynamic IP service. There are some ISP services that can give you a static IP, or third-party static IP alias to the dynamic IP, if you need it.

  • HT1331 I just bought a airport wireless router I have a time warner cable modem. I have hook up the modem correctly to my new apple airport router and my modem is not working with the apple airport router. what do i need to do?

    I just bought a airport wireless route and I have a time warner modem. My problem is my modem is not connecting to my apple airport router. What do I need to do?

    Power cycle the cable modem.. you may try leaving it off 5min.. might be enough.. sometimes you need 15min or even longer.. Followed by power cycle of the AE.
    Nothing else should be connected to the modem.. except the router that will get the public IP as they only hand out ONE>

  • Shared USB Printing not working

    I have a HP Laser Jet 1012 attached to my G4 tower via USB. It is described as "Laser Jet 1012 USB" in the add printer dialog box. I can print using the G4 tower with no problem.
    When I try to add this printer using my G4 Power book via shared USB printing or just USB it is described as "Laser Jet Bonjour printer". When I try to print I get a "forbidden message" in the Print Status dialog box and of course no printing results.
    I have reinstalled the original and the latest printer drivers numerous times.
    Any help would be appreciated. Thanks,
    Bill T.

    Yes shared printing is enabled on the G4 Tower.
    Bill T.

  • We just set up an apple airport wireless router but i can't print from iPad to hp officejet all in one J4680.  the iPad is connected to  the network as well as the printer, but it doesn't print

    How can I get my ipad to print to HP J4680 through apples airport wireless router

    Hello ddoonis,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    Have a nice day,
    Mario

  • I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

    THE SHORTER STORY
    My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
    I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
    In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
    What is the best configuration or set-up to accomplish my above goals?
    Thank you in advance for your assistance!!!
    THE FULL STORY
    I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
    (1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
    (2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
    (3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
    (4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
    (5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
    (6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
    I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
    The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
    I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
    I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
    My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
    However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
    Modem
    Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
    Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
    Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
    Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
    ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
    Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
    Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
    Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
    WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
    Existing Laptops on the Wireless Network Requiring Time Machine Backups
    MacBook Air (11-inch, Mid 2012) OS X 10.8.2
    MacBook Pro (13-inch Mid 2010) OS X 10.8.2
    Other Existing Apple Products (Clients) on the Wireless Network
    iPod Touch (second generation) is model A1288.
    iPad (1st generation)
    Apple TV (3rd generation) - Quantity two (2)

    Thanks Bob Timmons.
    In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
    I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
    Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
    Create a wireless network
    Extend a wireless network
    Off
    Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
    Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
    DHCP and Nat
    DHCP Only
    Off (Bridge Mode)
    Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
    How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
    Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
    Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
    I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
    Extenders / Repeaters / Wirelessly Extending the Wireless Network
    I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
    Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
    Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
    So what is left? Do you have a Plan B for me? Thanks in advance for your help!

  • Setup Problem Airport Express / Window XP/ USB printer

    Hello everyone.
    I bought an Airport Exress yesterday (802.11n) and try to hook up to USB printer (Samsung CLP 300) but nothing is happening.
    Existing Setting
    -My base wireless device Linksys (Wireless-G 2.4 GHZ) hookup to the cable modem and computer (Window XP) picks up a base singal thru Linksys WMP54G. Currently all my internet connection works great. The Linksys security setting is WPA-Personal. Also, the address is "assigned by DHCP."
    Propsed setting is that I want to achieve. I have tried for serveral hours but it did not work.
    -I plugged AX to AC outlet and connected USB to samsung clp 300.
    AX sttus lights is Flashing amber. There is no wire connection to internet router.
    -Airport Utility does not pick any signal.
    -I also tried installing a Bonjour but it did not find any printer.
    -Nothing appears on linksys network site survey except my base Linksys.
    Please help~ Thank you very much.
    Message was edited by: mooly

    My first suggestion is to always remove whatever encryption you are using on your router before you set this up. Temporarily take the encryption off of your Linksys router by going through the GUI interface in a web browser.
    In your post, you do not mention if you have used the Airport Utility yet. Have you? This should be loaded onto your computer and you should run it to see if your computer can see the AX. If you can't, then take some ethernet cable and hook it directly to your computer. Run the Utility again.
    If you can see it, then follow these instructions:
    http://support.apple.com/kb/HT1731?viewlocale=en_US
    It is important that your router if broadcasting its Network Name, or SSID, and that in the Airport Utility that you choose "Join an Existing Network"
    Once you unplug the AX, test to see if you can print to your printer. If not, plug your printer into the AX through its USB port. Run Bonjour for Windows. While connected, see if you can print a test page. If so, then disconnect your computer from the AX and try another print job.
    The AX takes a minute to establish a connection, so if it starts blinking yellow as soon as you unplug it from your computer, wait a bit. If it turns green, then you should be good to go.
    Put your encryption back in this order: you must know what the key code is and you must enter it into the AX first; save; AX will start to blink yellow; secondly, go back to your router and re-enter the same key; save. Wait a minute, and see if the AX turns green.
    Try printing a test.
    Hope that works. Some printers are tricky with the AX.

  • How do I connect my HP Laserjet 1102w directly to a Linksys AE3500 wireless router with USB option?

    I am trying to connect an HP Laserjet 1102w directly to an HP desktop model a172n with Windows Vista Home Premium OS (32 bit) through a new Linksys AE3500 dual band wireless router which has a USB port for a direct connection. The desktop can see the wireless router but not the printer.
    Is there a work around, a printer installer update, or some other solution that enables me to connect the desktop to the printer via the USB connection on the wireless router? I need to have one wireless laptop and one non-wireless desk computer able to use the one printer.
    Thanks for any assistance!
    Murleen Ray

    hi there,
    It seems as though this situation will require the Cisco connect software to function properly. Check out this article from the cisco knowledge base. It has the step by step setup specific to your case. Let us know if this helps or if you have already been through these steps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Airport Extreme - problem with usb printer and usb disk

    I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
    1)
    My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
    - printer seems working fine after installing bonjour printer installing wizard.
    - I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
    - In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
    - printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
    2)
    USB disk is Targa Databox II 250
    - Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
    - I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

    I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
    After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
    FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

  • Sharing USB printer between 2 Macs via firewire

    I have two Macs in my office--an iMac and a G5 tower. The iMac connects to our University network via Airport. The G5 is wired in through ethernet. My HP 1012 LaserJet is connected to the G5 by USB. Our wireless and wired connections go through different subnets.
    Is there a relatively easy way to print from both machines to the usb printer hanging off the G5. I just spent a little time this morning playing with IP over firewire but my wireless iMac still can't see the printer. I also tried sharing the printer--it shows up fine on all the wired lab computers down the hall but my wireless iMac still can't see it.
    Thanks for any advice...

    Don't know for certain that Printer sharing works with IP over FW, but other things like File Sharing does.
    When setup with IPoFW, are both FW ports checked ON in Network>Show:>Network Port Configurations?
    Does File Sharing work with it?
    What are the 2 FW IPs?
    Is Printer Sharing only turned on on the one with the Printer attached? If the iMac ever had it turned on, you need to turn it off and reboot as it'll be confused.

  • Wireless Router with USB + External Hard Drive = Time Capsule?

    So I bought a TP-Link WR710N wireless router http://www.tp-link.com/en/products/details/?model=TL-WR710N which seems to support external storage in its USB port. I tried with various storage media and it kinda works. The bad thing is that it only sees NTFS drives. I tried an external hard drive formated for Windows and a USB stick, also formated for Windows and it discovered them. But when I tried my external hard drive which is formatted as Mac OS Extended (Journaled), which I was using for Time Machine, it couldn't see it. Neither the TP-Link software, nor the Time Machine software.
    Is there any way I could use this router with this hard drive for wireless backing up with Time Machine NOT buying extra equipment (NAS, AirPort Extreme or Time Capsule) ?
    Thanks.

    m3adi3c wrote:
    Is there any way I could use this router with this hard drive for wireless backing up with Time Machine NOT buying extra equipment (NAS, AirPort Extreme or Time Capsule) ?
    Thanks.
    No
    Take it back and get a Time Capsule or keep it and buy a regular external drive and connect it to the Mac directly.

  • Can I add an Airport Express into an existing Non Airport Wireless Network?

    Hi -
    Is there any way I can add an Airport Express into an existing Linksys wireless (802.11g) network?. I would not mind switching completely over to Airport but I want to maintain a hybrid (part wired part wireless) configuration as I have now.
    thanks for any assistance!!
      Windows XP Pro  
    home built PC   Windows XP Pro   WRT54GS Lynksys 4 port + wireless G

    Hi skyelaird and welcome to the Discussions
    Is there any way I can add an Airport Express into an
    existing Linksys wireless (802.11g) network?.
    Yes.
    You would need to configure the Airport Express to join an existing wireless network (client mode).
    In this mode you can share a USB printer and stream AirTunes, however the ethernet port would be inactive.
    iFelix

Maybe you are looking for