Non-Cisco guy here needs to install the activation key for AnyConnect

Hi,
I downloaded the key(s) and there seems to be an "Authorization Key" and below the list of services the key provides
the serial number of my 5510 and then 5 groups of numbers. I assume the 5 "goups" of numbers is the activation-key.
I tried using putty at the console and typed:
>conf t
conf>activation-key -->and then the series of numbers. I assumed I had to put a 0x in front of them all but itkind of flakes out as i
put i the last number and overwrites a little. What's going on?
Also we have the ASDM, if I can use that it would be simpler. How would I do that?
HELP!
--ar                  

Activation key is one of those odd commands you enter from enable mode, not from config mode. If you're in enable mode (# prompt), just type "activation key ___" (without quotes, just using your key in place of the ___). Reference.
In ASDM you can enter it via Choose Configuration > Device Management, and then choose the Licensing > Activation Key or Licensing Activation Key pane, depending on your model. Reference.

Similar Messages

  • What do i do if i have lost the Activation Key for parallels desktop?

    Hi!
    I bought a mac book pro on the 15th of august 2006 from the apple store in london.i also purchased parallels desktop at the time.however,i have misplaced the sleeve of the CD,so i dont have the activation key.what do i do?
    please help!
    thanks!
    Mac book Pro   Mac OS X (10.4.7)   parallels desktop

    Welcome to Apple Discussions, karishma!
    You need to talk to the people who make Parallels. You can find them here:
    http://www.parallels.com/en/support/

  • Need help : Installing the standalone OEPE for OSB 11g for development

    Hi All,
    It would be greatly appreciated if any one could share the details of installing the standalone OEPE (Eclipse along with the OSB plugin for 11g) for development purpose.
    If possible kindly share the download link for the same.
    Thanks in advance.
    Regards,
    Balaji R

    Hi,
    To have OEPE with the plugins for OSB you actually have to install Weblogic with OEPE and OSB. OEPE will need the libraries in Weblogic and OSB installation...
    The latest version for Weblogic+OEPE (Indigo) for Windows
    http://download.oracle.com/otn/nt/middleware/11g/wls/1211/oepe-indigo-installer-12.1.1.0.1.201203120349-12.1.1-win32.exe
    The latest version for OSB for Windows
    http://download.oracle.com/otn/nt/middleware/11g/111160/ofm_osb_generic_11.1.1.6.0_disk1_1of1.zip
    Weblogic download page...
    http://www.oracle.com/technetwork/middleware/weblogic/downloads/wls-main-097127.html
    OSB download page...
    http://www.oracle.com/technetwork/middleware/service-bus/downloads/index.html
    Cheers,
    Vlad
    It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
    https://forums.oracle.com/forums/ann.jspa?annID=893

  • I need help changing the security key for WRT54G2 1.5

    I already know the security key on my network, I just need to change it.  I don't have 'cisco connect'. I've tried the web based method with the 192.168.1.1 IP and using 'admin' for the password, but that gives me a '401 Not Authorized' error.  I've tried using my own security key instead of 'admin' and that doesn't work either.   How do I change this.  I tried to use the Linsky's knowledgebase and that didn't help. Live Chat won't help unless I'm willing to sign-up for some paid service plan, and there is no way I'm doing that.  I've never heard of a company charging their customers just to explain how to do something. All I have is a simple question about how to change the network security key when I already know what it is and there is no problem with the connection. Can anyone help me.  PLEASE.

    If admin didn’t work, it’s possible that you might have setup a different password to login to the setup of the router when you initially set it up. Since admin and your security key didn’t work when you tried accessing your router page, the other option for you then is to reset the router. Push and hold the reset button on the router using a pin or a paper clip for 30 seconds and unplug the power cord for another 30 seconds. Once the power light goes solid, you may start reconfiguring the settings of the router. For instructions, refer to these links: Setting up a Linksys router with Cable Internet service & Setting up a Linksys router for DSL Internet connection. Once you establish the wired internet connection, you may then start reconfiguring the wireless settings. Go to the Wireless tab: set the wireless configuration to manual; set a network name; then save the settings. Once saved, click on Wireless Security subtab:  set the security mode to WPA2 Personal and enter a new security key on the passphrase bar.

  • I need to use the 'Ins' key for reverting x,y & z axis co-ords

    Apple selling X3: The Return. However the problem is that the navigational command 'go to' will only take you to x and z coordinates, the pc users then use the 'Ins' key to flip to y axis for the third dimension navigation point. I have tried looking at keyboard mapping but the new aluminium iMac keyboard is an 'Function Key' nightmare compared to earlier version. Any brave soul wishing to answer this one.

    Have to wait for Admin to delete these duplicate message. Sorry peeps!

  • Installing the License Key for Solution Manager installation

    Hi,
    Any Idea how can I get License Key for solution manager installation? Solution manager installation do not requires a key of Solution Manager.
    When I want to download a new license file form the SAP market place.SAP I ask for a key of Solution Manager. 
    Thanks

    I guess it is hardware key. Go to the Tcode slicense and there you will be able to find out the active hardware key. Take it!!

  • Need to Transfer the Reco Key for payments stuck for clarification

    Hello Friends,
    I have created a lot with a */ wrong contract account in selection field with the payment details in fp25. After saving and posting  i am getting a message "Postings made, postprocessing is required". This means that it will not allow me to transfer through FPG4.
    In the List item i am getting this message "No assignment of amount 6,000.00- INR possible due to selection specifications".
    The problem is that i want this payment to stay in clarification account and pass the bank entry in R/3 by transferring the data.
    Please help me in this case.
    Regards,
    Charvi

    Hi,
    Firstly, to clear things, the status message "Posting made, postprocessing is required" means that either all items or some items in the payment lot\Check lot has hit the payment clarification worklist (FPCPL) and has not actually hit the account.
    There can be many reasons for this status message-
    (a) Main\Subs not configured for payments
    (b) Clearing settlement rules not configured correctly for incoming payments.
    (c) The values from the input file are not getting correctly passed in the payment lot transfer program, RFKKZE00.
    Go to t,code FPCPL, give the payment lot no. and execute and then try to post one of the item from the clarification to the account. During posting, you will definately get some error which you can use as a start point for your further analysis.
    Finally,when you are posting a query can you open a new thread instead of using an existing answered one.?
    Thanks,
    Amlan

  • What is the activation key for Windows 8.1 pro with media center build 9600

    Send me through mail.

    The specs indicate that the computer originally had FreeDos on it.
    Did you purchase a full retail version of Windows 8.1 to install on it?  If you did your invoice or documentation should have the key.
    Please mark my post as SOLVED if it has resolved your problem. It helps others with similar situations.

  • HT1926 hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?

    If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
    First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
    At the command prompt:
    Type %windir%\system32\msiexec.exe /unregister and hit enter.
    Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
    Type %windir%\system32\msiexec.exe /regserver and hit enter.
    Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
    Restart the PC and try another reinstalll.

  • Here is my problem: "To open "Adobe Photoshop CS5.1" you need to install the legacy Java SE 6 RUNTIME" after upgrading iMac to Yosemite, can anybody help?

    Here is my problem: "To open "Adobe Photoshop CS5.1" you need to install the legacy Java SE 6 RUNTIME" after upgrading iMac to Yosemite, can anybody help?

    This answer may be somewhat late, but just in case other have the same issues, I went to site listed below and it solved the problem.  No need to reinstall CS5 product.  I hope this works for you.
    http://support.apple.com/kb/DL1572

  • Os x yosmite shows this message at startup: To view this web content, you need to install the Java Runtime Environment.

    so I've just downloaded and installed OS X 10.10 YOSEMITE on my mac this morning and I find the design refreshing, however when I do a reboot of my mac this popup message always shows up: To view this web content, you need to install the Java Runtime Environment. here's a screen shot of it
    it is really annoying, and quite bothering on my part. I tried clicking the "more info..." tab as instructed by the popup/ notification, which led me to the webpage of java, and this is a screenshot of what I got
    so I've downloaded the .dmg file of the Java 8 update and installed it on my computer, did a check on my safari browser settings to see if the Java plugin is activated and, it is. Hoping that that the trick I rebooted my mac again and voila! the same popup appears again. I hope you could help me on this one guys, any suggestions for a quick fix would be greatly appreciated. Thank you.
    Here are the specs of my mac:

    This is a user forum. Apple probably monitor it but they are not on here answering questions.
    Not sure what you mean about the hidden information-i mean cheese how much info is 'gleaned' across the net and its nothing to do with the OS and don't get me started on the behaviour of some OSs!. You can set your machine to not give feedback to Apple.
    Not sure what does not convince you in what Casey Rey said-its a fact there is a download.  Download it don't download it ,what is you want Apple to explain? They made a decision not put JRE on OS X by default -i think there might be some licensing thing about it with Oracle going on. If you need it you need it if you don't you don't. Its like saying you wont install MS Office unless they explain why thats not on the machine by default.
    Who sold you the machine with the faulty screen? Apple on line? The Apple store? An Apple Dealer? How long have you had it? If i buy a Ferrari with a dent in the door and i knew it had a dent in the door it would be funny to say 'when this Ferrari breaks i am switching back to Porsche because they don't have dents in the door'

  • To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.

    Recently updated to OSX Yosemite.  Now every time I turn the computer on I get this message.
    To open "CS5ServiceManager" you need to install the legacy Java SE 6 runtime.
    I don't know what CS5ServiceManager is.  And when I click on the "More Info" button, I am redirected to a blank screen.  So I'm confused and a little worried.  Is it necessary to install Java SE 6 runtime?  If so, I think I can find the instructions on how to do it, but I'd like to know if (1) it is safe to do so and (2) if it's necessary.

    Here it is: Apple Java 2014-001. Quite safe to install. Only necessary if you are using Adobe's CS5 suite.

  • I have tiger 10.4.11.  In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher.  Is there a way that I can upgrade to leopard?  Help!!

    I have tiger 10.4.11.  In order for my computer to recognize my new Iphone I need to install the new iTunes, however the new iTunes will not download on my computer because it is not 10.5 or higher.  Is there a way that I can upgrade from tiger to leopard?  Help!!

    Mac OS X 10.5 Leopard installation system requirements
    http://support.apple.com/kb/TA24950
    Leopard is no longer available at the Apple Store but may be available by calling Apple Phone Sales @ 1-800-MY-APPLE (1-800-692-7753).
    If you can't obtain a retail install DVD from Apple, look on eBay or Google the installer part numbers to possibly find at an on-line store. Here's what to look for:
    MB427Z/A  Leopard 10.5.1 install DVD
    MB576Z/A  Leopard 10.5.4 install DVD
    MB021Z/A  Leopard 10.5.6 install DVD (single user)
    MB022Z/A  Leopard 10.5.6 install DVD (5-user family pack)
    Installing Mac OS X 10.5 Leopard
    http://support.apple.com/kb/HT1544
    Mac OS X 10.5 Leopard Installation and Setup Guide
    http://manuals.info.apple.com/en/leopard_install-setup.pdf
    After you install the base 10.5, download & install the 10.5.8 combo update at http://support.apple.com/downloads/Mac_OS_X_10_5_8_Combo_Update
     Cheers, Tom

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • HT3775 This file contains a track in the Dolby AC3 Audio (code "8192") format. You may need to install a QuickTime component for this audio format in order to hear the soundtrack of this file.

    This message appeared and does this just mean I need to upgrade Quick time player? This file contains a track in the Dolby AC3 Audio (code "8192") format. You may need to install a QuickTime™ component for this audio format in order to hear the soundtrack of this file.

    Luckily, there are DOZENS of video/media players and extensions avaliable for the Mac. Many of them are FREE, some of the better FREE ones are...
    PERIAN (quicktime extension)
    http://perian.org/
    QUICKTIME 7.6.6
    http://support.apple.com/kb/DL923
    VLC media player
    http://www.videolan.org/vlc/
    NICEPLAYER
    https://code.google.com/p/niceplayer/
    And if none of those work, there is a possibility that those video files may be corrupted.

Maybe you are looking for