Non compatible with new car radio

I have a new car with a new radio made for iPods (MP Players). I have been using my other ipod, the one that looks like a stick of gum, and it works fine. I just tried my Touch and ...no sound. I can see it is charging the Touch but it won't play.
Any ideas. Didn't find any in my search of this topic.
Rob

Try putting it on music first.
The Touch is different from other iPods, so I'm not surprised that older, pre-Touch systems may not like it.
If you have an aux jack, that will work, but as you said, no charge.
I have a Scion tC with the iPod option, and it does work with the Touch - two years before the Touch was on the market, so I'm happy, but would understand if it didn't work.
Scott

Similar Messages

  • HT1349 I need to restore back to 1.0 on my Nano as iTunes upgraded automatically to 1.2 and it's not compatible with my car device. Where can i download the ispw and ispw.signature files for 1.0 ?

    I need to restore back to 1.0 on my Nano as iTunes upgraded automatically to 1.2 and it's not compatible with my car device. Where can i download the ispw and ispw.signature files for 1.0 ?

    I don't think it's possible if you are stuck in recovery mode but I may be wrong...
    Since your device qualifies for iOS 8(.1), that is the version that will be downloaded/restored to the iPad.
    I do know that you can restore your iPad (from backup & as new) and keep the same iOS version if you restore using the iPad itself under Settings/Reset/Erase All Content and Settings but since you can't access this because your stuck in recovery mode, the point is moot.
    Have you tried downloading the update in the middle of the night (2 am or so) where dropouts are much less likely to occur?
    It's always possible to take your device in to an Apple Store (make a Genius Bar reservation first) and do the iOS update there in the Apple Store.. I'm sure they will gladly help you out with it and not charge you a thing. The trouble with that would be if you don't have an Apple Store nearby.
    Sorry I couldn't be of any more help.

  • I just purchase a brand new mac computer and I need to purchase new adobe CS software. Do you know if Adobe CS5 Design Premium-MAc is compatible with new mac computers with the updated software?

    I just purchase a brand new mac computer and I need to purchase new adobe CS software for work. Do you know if Adobe CS5 Design Premium-Mac is compatible with new mac computers with the updated Yosemite software? *No previous adobe CS software versions are on this computer

    There are known technical issues with any older version on Yosemite, even CS6. Some can be worked out, others may not be relevant to you, some will remain unsolved.
    Mylenium

  • Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

    Want to be able to open tabs in multiple rows, rather than in a single row. I used tab mix plus before, but it says it is not compatible with New tab Homepage. The older version of Firefox allowed this very easily.

    Your plugins list shows outdated plugin(s) with known security and stability risks.
    *Java Plug-in 1.5.0_06 for Netscape Navigator (DLL Helper)
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)

  • Foxfire 4.0 non compatible with Kaspersky Anti Virus & password protector.

    I have had Foxfire as my primary browser for sometime with no issues,until the most recent update to Foxfire 4.0 this update is now non compatible with Kaspersky Anti Virus & Password protector.I've attempted to download Foxfire 3.6.15 with no avail. Please advise accordingly. Respectfully, George Bourque

    Hi,
    I'm from germany so no 'best buy' but I think I will lock around sleeve/bag for a different product with same measures. Any tip?
    The clear plastic case is not what I want. I would like to use the player without such protections. I just want a sleeve to protect the player while its in my jacket/pants.
    Btw, i have bought this version: Creative Zen (maybe european version?). I also doesn't seem to have your mentioned sleeve. I also couldn't find it on the website.
    Anyway, thank you,
    Chris

  • Is 16 gb  PC3-15000 (1866MHz) memory compatible with new 2.4 i7 machine??

    is 16 gb  PC3-15000 (1866MHz) memory compatible with new 2.4 i7 machine??

    No. It requires 2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMMs.

  • Is MSI P35 Neo compatible with new USB3 PCI-E adapters?

    I've just bought a 1 Tb Samsung USB3 powered external HDD.  Currently I only have USB2 ports which can't handle the transfer speed of USB3.  Is my MSI P35 Neo mainboard compatible with new USB3 PCI-E adapters, if I were to fit one?
    Thanks in advance
    Pedro

    If it is an add-on card, it should work if the drivers are properly installed.
    However, if you need more information on compatibility results, I suggest that you log a technical support ticket with MSI.
    >>How to contact MSI.<<

  • IPod touch 2G does't work with Kenwood car radio anymore

    Hi
    since a few days ago, my iPod touch 2G does not work anymore with my car radio Kenwood KDC-W4544U.
    When i connect the iPod to the radio, the radio display shows "Reading", which it normally shows for like 5 seconds. But now the "Reading" lasts forever, after 10 minutes of trying to let my radio read the iPod, i have no other possibility but listen to CD or radio...
    I have already shut down and restarted the iPod, synched it, even restored it via iTunes. I also tried three different connection cables.
    Is this a known problem and is there maybe a solution?
    Thanks in advance for an answer

    Problem could be solved by hard-resetting the radio

  • Is model MC769B/A 3rd or 4th generation ie compatible with new skylanders tablet package?

    Is model MC769B/A 3rd or 4th generation ie compatible with new skylanders tablet package?

    The model MC769B/A is an iPad 2. And according to the Skylander's requirements, the Tablet starter pack requires an iPad 3 or above.
    http://www.amazon.com/Skylanders-Trap-Team-Starter-Pack-android/dp/B00MG38CG8#pr oductDescription
    So not likely to work with an iPad 2.

  • Any navigation app compatible with new iPhone 4G?

    Hi all,
    I am a newbie and I was looking appstore via my PC.
    I would like to purchase some navigation app (tomtom, navigon, iGo or Sygic) but
    could you tell me are these compatible with new iPhone 4G? I can see that some of those are tested with new iOS4(with iPhone3GS) but how about HW?
    Is there possibility to purchase incompatible sw via mobile store app?

    All apps that are compatible with previous iPhone models are compatible with the iPhone 4. This isn't the fragmented Android app market or the app market for any other device.
    An app that is compatible with iOS 3.x is compatible with iOS 4.x. If a GPS voice navigation app hasn't been updated with iOS4 to be able to run in the background, the app won't run in the background with iOS4, but it will run as it runs on iOS 3.x.

  • My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio syste

    My IPOD 7th Generation is not compatible with my cars audio system. I had the IPOD nano 4th generation earlier and it was perfectly working on my car audio system. Is there any way i can make the IPOD Nano 7th generation compatible with my car audio system?

    I am assuming you are using the Lightning to 30 pint adapter and it is not working?

  • Is this power supply (A1185 10.8 V, 55Wh) compatible with  New White 60W 16.5V 3.65A Laptop AC Adapter Supply Magsafe Power Charger For Apple Macbook pro A1184 A1185

    Is this power supply (A1185 10.8 V, 55Wh) compatible with  New White 60W 16.5V 3.65A Laptop AC Adapter Supply Magsafe Power Charger For Apple Macbook pro A1184 A1185

    All of the A1181 polycarbonate MacBooks use the A1184 60W MagSafe power supply/charger and the A1185 battery. These are the Apple part numbers. Other manufacturers make equivalent replacement products, but the quality may not be acceptable.

  • New 5thG nano compatible with 4thG car charger/fm transmitter accessories?

    As said in the subject, I was wondering +if anyone knows yet+ if the car charger/fm transmitters made for the 4th Generation Nanos are compatible with the new 5th Generation? If so, what's the most reliable charger/transmitter?

    I have a FM transmitter which I use with a 2nd Gen Nano and it also works with a 5th Gen Nano. Hence I would assume a transmitter which worked with a 4th gen also works with a 5th gen. After all, it is all about the connector and that is always the same.
    Hope this helps.

  • Can't sync with new car phone

    When I try to sunc my Treo 680 with my new Ford Taurus, I get the message "Unable to sunc with trusted device."  My first attempt was when my previous car was within range and it appently tried to sync again with it.  It is now out of range and I still get the message.
    Post relates to: Treo 680 (AT&T)

    Hi..  Welcome to the Palm forums.  You 680 is a older device and you Taurus is a new vehicle.  Being new it probably has the new MicroSoft sync technology.  That technology was not available when your 680 was developed.  The compatibility list from Palm.com shows compatible with Ford (Pieker Mobile-Ease).  Check your owner manual and if that is the bluetooth car kit installed by Ford it may be able to sync.  If it is MicroSoft sync it is not compatible.   Here is a link to Palms compatability list:  http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=4572,E=0000000000276180038,K=1739,Sxi=4,Case=obj(41...
    Post relates to: Centro (Sprint)

  • Expansion base xb3000 - compatible with new HP laptops?

    Good morning all!
    I am currently using a DV8305 laptop connected to a xb3000 expansion base.  It is a great set up!  I would like to get a new laptop (something in the DV7 range) and use it with my old xb3000. The problem is, none of the new HP laptops are listed in the online compatibility list (and I dont want to buy a new expansion base.)  The xb3000 appears to have an Expansion Port 3 connector (as do selected HP laptops), so it should work.... or would it?
    Any assistance would be greatly appreciated!
    Thanks,
    Ian  
    This question was solved.
    View Solution.

    I am using the xb3000 with my new DV7-1135NR and it works perfectly. I bought an xb 3000 power supply on Ebay for about $15.00 and noted that the output is 18.5v and 4.9amps. The power supply for my DV7-1135NR is 18.5V and 4.9 amps. Electronics experts tell me that the difference is completely negilble and harmless.
    Suggest you check your laptop power supply against the above, and make sure you have or acquire one with the base expansion port on the left side of the laptop.
    Mine is working perfectly, charges my laptop and powers it during operation. No problems whatsoever. All of the features of the xb3000 (i.e. usb ports, volume control, power switch, etc) are active and completely functional.
    I might add that HP tech support (if you can call it that!!) kept me on chat and subsequently on the phone for 30 minutes before advising me that my laptop was NOT compatible with the xb3000. Further, they could NOT identify the drive that is compatible with the drive bay on the xb3000. Just for info, HP sells an adapter for $19.00 that allows HP mini drives to be used in the xb3000. The mini drives are sold direct on the HP website is the adapter and they are very reasonably priced. As a matter of fact, priced much better than the one dimensional and proprietary drives originally sold for the xb3000.
    Well, lots of info here. Hope this helps. Good luck and best regards,
    ClaptonSTL

Maybe you are looking for