Non-Compliant Devices

Hello,
I have a collection of PC's I have deployed Windows Updates to. Some of the PC's are reporting as in-progress but non-compliant.
How do I get this to reset so the software can check the compliance again... Its seems like once they are non-compliant there is nothing you can do to get them out of this state..
Cheers.

There's a script in the SDK that can be used to re-send state messages. It might solve the problem.
Torsten Meringer | http://www.mssccmfaq.de

Similar Messages

  • Downloading HD Videos on a non-HDCP Compliant Device

    I'm having troubles downloading HD videos onto a non-HDCP compliant device. My aim is to purchase and download the videos on this device and then transfer or stream to a HDCP compliant device.
    I get so far as the "This cannot be played in HD on this computer." which even warns me that if I continue to download the video I won't be able to watch it. I can "Cancel", "Buy SD for $xx.xx" or "Learn More" but not "Continue with Purchase"
    How do I continue the download?

    I want to purhase Gravity and its 720p the HD version, will it work?

  • Devices in Deployment status show up as Non-Compliant

    In the deployment status section of SCCM 2012 we have 6 of the 10 servers listed in the In-Progress tab which are Non-compliant. 3 of the servers are list as Downloaded Updates. Verified that the boundaries are set up correctly and check relevant logs and
    no software updates are being pushed out to the servers almost an hour into the maintenance window. Not sure what the cause is, could use all the help I can get. Thanks!

    Hi,
    Is the client healthy?(CcmEval.log, ClientIDManagerStartup.log, ClientLocation.log, LocationServices.log)
    Could the client communicate with MP? Please check CcmMessaging.log and open
    http://<MP Name>/sms_mp/.sms_aut?mplist in IE on the client to see whether it can find the MP.
    Best Regards,
    Joyce

  • Deployment Question and non-compliant

    Hi, I have a question about deployments and non-compliant systems. Since we updated to 2012 R2 I have had many patching deployments fail with non-compliant messages. If I bring up the deployment it shows many are installed and many are Required.
    Could anyone answer the following question?
    If for example I am deploying a IE 11 patch to Windows 7 machines that does not have IE 11 installed yet would that give the non-compliant error because it cannot install the IE11 patch? This would also apply to .Net 4 and 4.5 for example. We deploy Software
    Update Groups based on Operating Systems so every month I search for every patch non-expired and not superseded for the OS in question and then make the software update group based on that. I figured if the software update group had a patch for a product like
    IE 11 that was not installed on the device yet it just would not install it.
    Any help is appreciated.

    Hi,
    If the update isn't applicable let's say that IE11 is not installed it will not report it as non-compliant and it will not report it as required either so you should be fine in the reports.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • ISE Posture for non-agent device problem

    I have a couple of questions:
    - They said it the documents: "these (non-agent) devices assume the Default Posture Status settings". I wonder how ISE determines that a device is a non-agent device, or to put it another way, when is the Default Posture Status settings applied to a device? Is it after some period of time not receiving anything from the agent? If yes, can and where do I change that time in ISE?
    - I tested this with my lab and saw that: after the user successfully login with his account, and the Authorization profile with Client provisioning is applied to that session, the user goes to a web page and gets redirect to the CPP page. Now if he just sits there and doesn't install the NAC agent, I noticed that after about 40s, the session is automatically restarted to a new one, with a different session ID, but the same username. The new session gets to the point where the same redirect Authorization profile is applied and the whole process cycles over and over. Things I observed each time the session restarts:
    + The user doesn't even have to enter the credentials again. The 802.1x login doesn't popup 
    + The Default Posture status (I set it to Noncompliant) is applied to the session right before it restarts. I can see an event on ISE indicating that. The event also shows the Acct-Terminate-Cause as "Admin Reset"
    + If at any point, the user installs a NAC agent then he can break the cycle (e.g becomes compliant) and carry on with other Authorization profiles
    So my question is: is that expected behavior of ISE? Although it seems no harm except new sessions are created continously
    Or have I configured something wrong?

    Anybody?

  • POE Switches vs Non POE Devices

    hi, since we installed our new POE switches in different point of services (C2960X Software (C2960X-UNIVERSALK9-M), Version 15.0 (2) EX5).
    Sometimes power is discovered on non POE devices..And do a reset on the interface..
    Generally these devices are UNIX cash register. The easy way to remedy to this problem is to disable the POE ..But we will eventually needs POE on each interfaces..
    Someone has an idea of why the switch detect a POE device even if he is not? .. Or any workaround suggestion, we only need POE on our CISCO POE devices, LLDP is globally disabled.
    Mar 17 10:55:14.022 EDT: %ILPOWER-7-DETECT: Interface Gi1/0/28: Power Device detected: IEEE PD 
    Mar 17 10:55:17.189 EDT: %ILPOWER-5-POWER_GRANTED: Interface Gi1/0/28: Power granted
    Mar 17 10:55:17.301 EDT: %ILPOWER-5-IEEE_DISCONNECT: Interface Gi1/0/28: PD removed
    Mar 17 10:55:18.325 EDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/28, changed state to down
    Mar 17 10:55:20.335 EDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/0/28, changed state to up

    Like everyone has already pointed out, a PoE device will need to be connected directly to a 802.3af compliant PoE switch. If you only have one jack for every workstation, then you will have to connect the phone to the wall/switch, and connect the computer to the phone. If you have separate data and voice vlans (like you should), 802.1q will need to be configured for the port as well.
    PoE injectors are a great if you have them installed here and there, but if every port has one it will be a mess and PITA to work with since there will be double the Ethernet and as many power cords as you have injectors.
    I stated 802.3af earlier because I've come across "PoE" devices (mainly from ubiquity) that still need an injector even though the switch is PoE.

  • Imac no longer "sees" shared non-Mac devices on network

    Hi everyone,
    Here's a real puzzler (for me anyway). I have three Macs, two PCs and an Escient digital jukebox on the home network over standard router-based ethernet connections. The system has worked great especially since Leopard came out and automatically detected the non-Mac devices and added them to the shared category on Finder. Suddenly in the last couple of days I noticed that although the Mac devices are still on the shared network, the PC hard drives and the Escient jukebox has mysteriously disappeared. All of the devices work properly, and I have made no changes in my network recently.
    Any thoughts on diagnosing the lost shared devices and restoring them? I tried Time Machine, but it acted also as if those devices never existed. Thanks for your help!

    Hmm yes.. this is a strange one.
    You could try this as it appears to work with a couple of tests I ran.
    Open your Network Preferences pane from  > System Preferences.
    Make a new location.
    For which ever interface you are using, be it Wired (Built In Ethernet) or Wireless (AirPort), click the "Advanced" Button. Click on "WINS" and enter the workgroup name of your other Windows Devices (Default is usually WORKGROUP) into the Workgroup drop down menu.
    You can also use the menu to see if your mac can see any other workgroups.
    Click OK, Click apply and see if it worked.

  • ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant

    ISE 1.2 - Posture Detail Assessment - enforcement audit mode report not show status for non-compliant.
    - For old version 1.1.4 it can be reported for non-compliant, How can I generate report for this? 
    Thanks
    Kosin Usuwanthim

    It used to be in there (id 226635 is the last one with it); should I clean it up a bit and put it back with a bit more of a disclaimer?

  • First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
    Settings>General>Reset>Erase all content and settings

  • How can I transfer music from my iphone to other non apple devices

    How can I transfer music from my iphone to other non apple devices ?

    If this is music purchased through the iTunes Music Store, you would need to transfer the music to your computer using iTunes then transfer to the non-apple device according to the manufacturer's instructions.

  • The one non-Apple device I want to hold on to is my Blackberry.  Apologies - put it down to age.  is it possible for me to sync Calendars?  [what IS an Ical?]  Contacts and Notes etc syncs easily - only Calendar problem. i do hv a Google calendar/account.

    New to Mac (at 60+ years] and enjoying it.   But one non-Apple device want to hold on to is Blackberry 9900.   I can sync contacts, tasks - but NOT Calender.   I get message telling me to set up an iCal.    I have Google Calendar and happy to use that as 'hub' as it were, if that does job.  Syncing my Air and smartphone is important - help please?

    Another weird thing related to above question....when I first plugged in the itouch, it asked if I wanted to update the software and I did.  Then it went into restore.  Then the itouch itself went to a grey screen and asked me questions such as did I want to back up to icloud, use find my itouch, etc. plus it wanted my Apple sign in.  I did all that.  Once the itouch came on, I noticed that my daughter's music and photos were gone.  So that was all good.  But then at some point later when I was trying to figure out how to sync, I noticed another notice from Apple on my computer asking if I wanted to update.  I assumed that was for my computer not the itouch this time.  I did that.  Then the itouch was back to the grey tones and the same sign in questions.  Now my daughter's photos are back on it but not her music.  When I click Sync, nothing happens as far as loading the music.  Could this be that my music library is too big for the memory?  Wouldn't it tell me that rather than just not do it?  As you can see, I am very confused.

  • I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my wireless network. Is there a limit on the number of devices I can connect to my AirPort? I never have a problem connecting an Apple device (AirBook, iPad, etc).

    I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.

    The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.

  • I can't find my previous ??? concerning if it is possible to load songs from a "non-apple" device into iTunes

    I can't fnd the question I asked in here roughly an hour ago - concerning if I can load songs from a "non-apple" device. I have a SanDisk that I'd like to load my songs into iTunes - is this possible?

    A.C.,
    These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring Playlists, Ratings, Play Counts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
    Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
    MacMuse: Computer Crashed (free user steps – music recovery only)
    Copying music from iPod to computer (a primer on various methods and software)
    Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
    iPodRip Software
    PodUtil Software
    Senuti (Mac OS X v10.3 or higher Recovery Utility)
    XPlay (Software For Music Recovery &/or Cross-Platform Functionality)
    XPlay Photo Browser (For recovering Photos)
    After recovering your song files, strongly consider developing a thorough backup strategy for just this type of situation (and many other potential disasters).
    You need at least two full sets of your music, not including what is on the iPod:
    -- One full set on the PC within iTunes (on internal HD or ExHD)
    -- One full set on an separate external backup medium (CD/DVD/ExHD/other)
    -- One (full or partial) set on the iPod
    Music files on just the iPod and only one other medium is not considered having any backup.
    If you cannot store your complete music files on the computer’s internal HD, then create and maintain at least two external sets (any multiple combinations of ExHDs, DVDs, CDs).
    Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
    Here is a post on developing a thorough backup strategy: http://discussions.apple.com/click.jspa?searchID=394618&messageID=1263275

  • Hi All. I reluctantly upgraded to IOS 7 last night and now cannot access my home WIFI, all other non Apple devices are fine. I have reset, it will not allow me to 'forget this network', doesnt show the option. I have turned on and off

    Hi All, I reluctantly upgraded to IOS 7.1.1 on my IPAD last night , reluctant as every upgrade which promises fixes which dont impact me causes problems that do , which I fix via this community. Today I can no longer access my WIFI at home, my non Apple devices all work fine.I have tried all the online suggestions I can find for this, reset facgtory settings, it will not allow me to 'forget this network', I try to reconnect and it asks for my password which I know is correct and it says it cannot access my network. It can access an unsecured one I believe, but that is not ideal. Any fresh suggestions would be really welcome, please. Many thanks

    Thanks so much for your reply, yes I did and that has not worked either . A friend has suggested re installing upgrade, so may try that .

  • How can I get report of only non compliant clients via Fileshare or to admin mailbox each day?

    I need to figure out how to get a daily report of non compliant clients in SCCM2012 to admin email or fileshare.
    Is there any built-in report that returns only non compliant clients I could use to accomplish this,
    and create alert subscription or exchange server connector to receive the message / file once a day ?
    Do I need to use SQL Server Reporting Services for this ? New to SCCM and getting confused with all those reports,
    sorry ;-)

    Yes you need SSRS for this.
    This will help.
    http://be.enhansoft.com/post/2013/08/27/How-to-Set-up-a-Windows-File-Share-Subscription.aspx
    http://be.enhansoft.com/post/2013/08/14/How-to-Set-up-an-Email-Subscription-in-SSRS.aspx
    Non compliant for what?
    http://www.enhansoft.com/

Maybe you are looking for