Non cumlative key figure
hi,
can anybody tell me how to model the non cumalative keyfigure.
do the data is loaded in non cumaltive key figure or it is taken from the key figure we are specifying in non cumulative value option.
pls explain in detail if possible with eg.
and how to solve the error
the validity interval has the initial value as lower limit
Hi,
We can upload in both ways.That means we can update directly non cumulative kfs.
For example BX Ds of cube 0IC_C03 updates the Non cumulative KF directly.
And we can also update cumulative KF which are used in Non cumulative as inflow and outflow.So that it will indirectly updates the Non cumulative KF.
For example BF Ds of cube 0IC_C03 updates the Non cumulative KF indirectly.
<i>the validity interval has the initial value as lower limit</i>
Refer Notes: 496638,571364
What happend to This thread:
https://www.sdn.sap.com/irj/sdn/profile?userid=22328
With rgds,
Anil Kumar Sharma .P
Message was edited by:
Anil Kumar Sharma
Similar Messages
-
Trouble with Non Cumulative Key Figures
Hi all of you,
I am working on Non Cumlative Key Figures, (NCKF). I have the data like this
Sales rep S100 visited SHOP S1 on 1st Jan and 10th Aug, and transacted worth 100 and 500
SHOP S2 on 1st Mar and 1st July and transacted worth 200 and 300
SHOP S3 on 3rd Sept. and transacted worth 400
Sales rep S200 visited SHOP S1 on 1st Jan and 1st Aug and transacted worth 100 and 300,
visited SHOP S2 on 1st April and transacted worth 200
I created Non Cumulative Key Figure in the following manners:
In modeling in InfoObjects I double clicked on my key figure BILLAMT and selected the Aggregation tab. I selected Counter (all values) for Exception aggregat. By default Agg. Referen. Char was 0calday. I then activated the info object and went to BEx. Here I took other IOs like Salesrep, Shop NUM and Dt. Of trans in rows and Bill amt in columns and executed the report. I am not getting the output how it should come for NON cumulative key figures.
But when I right click the key figure Bill Amount in BEx in change query mode and select properties. I go to the option Calculate result as and selected the option as Count all values. And in another option Calculate Single Value as I selected the option Count all values. I said OK, saved the query and executed it. Now the output is similar to how it comes for a Non Cumulative Key Figure query but I am unable to understand the output.
Now my doubt is where do we set the properties for Non Cumulative Key Figures? Is it in the Administrator Workbench under Modelling under InfoObjects?
OR
Is it in BEx change query mode by right clicking on the key figure and selecting properties?
Please explain.
Thank you
TR.As for the setting for Non Cumulative key figures...the default setting is done in the Key Figure properties, where u can define the Exception Aggregation. This property is used as such in the query, but if suppose u are getting the normal aggregation in the query , what you could do is "Create The Key Figure as Global Calculated Key Figure in Bex" and go to properties...click on the Button for aggregation ..select the aggregation and define with respt to 0CALDAY ..here.
Hope this helps. -
Purpose of Non Cumulative key figures
Whatu2019s the purpose of Non Cumulative key figures?
Hi....
There is an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Also Check..........
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
Re: Non-Cumulative keyfigure example
Hope this helps.....
Regards,
Debjani........
Edited by: Debjani Mukherjee on Oct 27, 2008 3:46 AM -
Problem with Non-cumulative key figure.
Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi RBeing a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra -
Non-Cumulative Key figure with inflow & outflow
I am using some non-cumulative key figure in our inventory cube, however, I could not find the non-cumulative field in E or F table of the cube?
Is there a separate table to hold the reference unit. If so, what is the table name.
Thanks.Hi,
Go to t-code RSDV and enter the tech.name of your cube that has the non-***. key figure and you will see a validity table. This is only thing I know that will make you look at validity table.
The unit for the Non-*** KF will be the same unit as its inflow and outlow parameters' unit.
Thats my 2 cents on the matter.
Reddy -
Non cumulative key figure is not getting filled based on inflow and outflow
hi,
i have a non cumulative key figure which is having inflow and outflow.
i have these three info objects in dso.
as i know non *** key figure is calculated based on inflow and outflow.
i am getting values for inflow and outflow so non *** should be calculated based on this values.
<b>but the collumn is blank in the dso</b>
in that non *** keyfigure i have added two info objects in inflow and outflow.
is there any other setting i nedd to do?
please sugest me.
its urgentHi Venkat,
Have you followed the process right. First Filling the Initial Stocks and then Inflow and Out Flow and then Delta. If you follow the process correctly then you can able to view the Data in the Reporting Level.
For Initial Stocks the Marker Should be set. For Inflow and Outflow the Marker should not be set.
Hope This Helps,
Regards,
rik -
Snapshot scenario or non cumulative key figure in inventory management
Hi
We are currently using Inventory Management with non-cumulative key figures but we get very high performance problems due to so big number of lines in info cube.
We are analyzing the other scenario with snapshot and I am asking if it would be very realistic to use it to satisfy our requirement: to be able to get inventory management at day level for about 2 000 000 combinations article-site and about 100 000 stock movement lines per day (we are retailer!).
Is there somebody to give me advice about it?
Tanks a lot
AnneBeing a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra -
Bad performance with non-cumulative key figures
Hi All,
I have a cube with 8 non cumulative key figures based on fiscper.
I am not sure how the performance for reporting with non-cumulatives can be improved.
Thanks
KarenPerformance of non cumulative cubes is dependant on the distance between the marker (date of the last compression) and the execution date.
For actual stock, the more you compress the better it is.
Regards,
Fred -
When do you go for non cumulative key figures?
hi all,
Can anyone explain the significance of non cumulative key figures. and when do we go for non cumulative key figures.
Can anyone explain me with an example.
thanxs in advance
hariHi,
chk these threads:
non cumulative key figures
Cumulative and Non-cumulative Key Figures
also,
There is also an explanation of advantages and disadvantages of using non-cumulative key figures in "How to handle inventory management scenarios in BW" white paper:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20handle%20inventory%20management%20scenarios.pdf
Assign points if this helps!!
Regards,
Dhanya. -
Using Non cumulative key figure in Real time cube
Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
RavikanthHi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee. -
InfoProvider with non-cumulative key figures
what does infoprovider with non-cumulative key figures...
noncumulative key figures..
looking for replyit's property of the KF... nothing do with Cubes or ODS.
Name itself telling non-Cumulative KF. We can't cumulate this KF. Suppose take the Case Sales Amount and No of Employees. Sales Amount can be cumulated over Time. But No Employees can't be cumulated. Same is the Case with Stock as well.
Nagesh Ganisetti. -
Samples of non-cumulative key figure
hi experts,
can u give me samples about:
1> in what scenario should i use the non-***.Value change to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : (here chose sum?)
Exception Aggregation:(here chose sumation?)
Agg.Reference Char : (here chose a 0calday?)
N-*** with N-*** Value Change
Non-***.Value Change: (here what to insert?)
2> in what scenario should i use the inflow/outflow to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : (here chose sum?)
Exception Aggregation:(here chose sumation?)
Agg.Reference Char : (here chose a 0calday?)
N-*** with In- and Out-flow
Inflow : (here what to insert?)
Outflow: (here what to insert?)hI
1> in what scenario should i use the non-***.Value change to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : sum
Exception Aggregation: sumation
Agg.Reference Char : 0calday-----* U CAN GIVE 0CALMONTH too to view head count month wise.*
N-*** with N-*** Value Change
Non-***.Value Change: * If u are maintaining delta value ie if no. of employees joined is 10 and resigned is 6, then delta value is 10-8=2*
in this situation use this type.
2> in what scenario should i use the inflow/outflow to create a non-cumulative key figure?
Characteristic : HEADCOUNT
Aggregation : sum
Exception Aggregation: sumation
Agg.Reference Char : 0calday
N-*** with In- and Out-flow
Inflow : *Inoobject which maintains no of employess joined *
Outflow: *Inoobject which maintains no of employess resigned. * -
Planning on Non-Cumulative Key Figure
Hello,
is it possible to plan data on a non-cumulative Key Figure?
SAP_ABA 701 0005 SAPKA70105 Cross-Application Component
SAP_BASIS 701 0005 SAPKB70105 SAP Basis Component
PI_BASIS 701 0005 SAPK-70105INPIBASIS Basis Plug-In
ST-PI 2008_1_700 0001 SAPKITLRD1 SAP Solution Tools Plug-In
SAP_BW 701 0005 SAPKW70105 SAP Business Warehouse
BI_CONT 704 0003 SAPK-70403INBICONT Business Intelligence Content
ST-A/PI 01L_BCO700 0000 - Servicetools for other App./Netweaver 04
We implemented also the How-to Paper Copy and Paste in the Web Template but it isn't working in a proper way. UnderPrerequistes in the How-to Paper I found IE 7.0 and Clipboard. But I was informed that we have an higher Level.
Thank you in advance for your help.
Kind Regards
DorisNot possible.Please find the help link for more details.
http://help.sap.com/saphelp_nw70/helpdata/EN/43/1c3c7031b70701e10000000a422035/content.htm
Regards, Hyma -
Cumulative key figure and non cumulative key figure
Hi BW Expertz
Could any one give me the clarification about cumulative and non cumulative key figures .Why we go for cumulative key figure and non cumulative key figure.If any docs could u just mail to the following [email protected]
Thanx In advance
Best regards
sankar prasadCumulative values are those key figures (KF) that are cumulated using all characteristics, thus also using time.
Ex: Sales revenue, Quantity....
Non-cumulative values are those key figures that are measured in relation to a period in time; they cannot be meaningfully cumulated over time. Non-cumulative values are summarized over time using so called exception aggregation.
Ex: Number of employees, Inventory, Stock prices, Account balance,.....
AGGREGATION TAB
Non cumulatives are evaluated by non-cummulative values. Non-cummulative values are special key figures that are different from other key figures (cummulative values) in data transfers and saving as well as in aggregational behaviour. These are measured in relation to a period in time; that is to say, they cannot be meaningfully cumulated over time. Non-cumulative value are summaraized over-time using exception aggregation.
Non-cumulative values such as 'number of employess' are cumulated using characteristics such as 'cost center'. It does not make any sense, however, to cumulate the number of employees using different periods. The result at the end of any particular period would be the sum total of number of employees for each posting during the period. This would of course be wrong.
Instead, the aggregation of the KF can be defined as exception aggregation wherein an additional references characteristics is utilized to tell BW which value to use during the period, in this case, 0CALMONTH is used, in the above example, to indicate that only the last value of 0HEADCOUNT, updated by costcenter, is to be taken for any calender year and month.
Cummulative vs Non-Cumulatives
The purpose of non-cumulatives is to optimize the data transfer in BW, the data retention and the database access. The data transfer from OLTP to BW is minimized and only the meaningful data is saved and processed.
It is recommended that you use non-cumulative values for areas that dont change frequently such as warehouse stock or number of employees.
Non-cumulatives are modeled in BW using a non-cumulative value with the fields belonging to it for storing the non-cumulative or for inflows or outflows.
Non-cumulative values are stored with special KF that differ in terms of data transfers and aggregational behaviour.
Features of NON-Cumulative Values Transfering and Saving Data:
- NC values are mapped uisng one KF for NC changes or two KF for inflows and outflows.
-NC are transferred in an initialization run and the change runs that follow (initialization can also be omitted here)
- A non-cumulative value always has a time-related exception aggegation.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_bw31/helpdata/en/82/f2dc37f0f12313e10000009b38f8cf/content.htm
http://help.sap.com/saphelp_erp2004/helpdata/en/d2/e0173f5ff48443e10000000a114084/content.htm
with Example
Re: Non-Cumulative keyfigure example
Re: Types of non-cumulative keyfigures
/community [original link is broken]
/community [original link is broken]?forumID=131&threadID=29557&messageID=273049
/community [original link is broken]?forumID=131&threadID=111914&messageID=1248243
****Assign Points If Useful********* -
Non-cumulative key figure in Real Estate implementation
Hi all,
I am implementing Real Estate Module in BW. We are doing analysis on Condition amount ( BKOND).
The mapped Info Object on BW side is 0COND_AMT, according to standara info sources given by sap ( for e.g in 0RE_3) and it is defined as a Non-cumulative KF with Non cumulkative Change 0COND_CHG.
Can anybody plese explain me the logic behind this. and also source field and table for this 0COND_CHG in R/3 side.Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.
Maybe you are looking for
-
I am using SQL Express 2008 R2. I have two servers ".\robbysqlexpress" and ".\sqlexpress". The ".\sqlexpress" server is not working. It gives error whenever I try to connect: "Cannot connect to (local)\SQLEXPRESS. A network-related or instance-specif
-
No longer in a US store. Everything in Fr.
I'm using the same computer but now my iTunes opens to what I think is a earopean store. Everything is in Fr. and I can't purchase. What happened?
-
HP High Definition Audio Device Code 10 Error -- Causing HDMI Sound Problem
Hey guys, my laptop is an HP ENVY TouchSmart m7-j010dx Notebook PC, running Windows 8.1. When I connect my laptop to my LG Smart TV through HDMI, I cant change the playback device to play the sound from the TV. The HDMI option does not appear in ¨Sou
-
Unexpected Error: The underlying connection was closed
Hi All, I have a requirement to send SMS to user after submitting a form. I have created a visual web part and it is working fine in my test environment. When the same webpart is deployed to production, i am getting an error like "Unknown SMS Error:
-
Hi Everyone, i have a crash every now and then. Looks like it has something to do with Networking or Bonjour. Nov 10 23:55:34.018358 Chriss-iMac.local discoveryd_helper[147]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server Nov 10