Non-cummulative KF wih NCum value change

hi,
Could anyone tell me the difference between the types of non-cummulative keyfigures
Non-cummulative value wih ncum value change &
Non-cummulative value with in and out flow
Kindly give me an example for the first one, I am pretty ok with the inflow n outflow type.
Regards,
sujai

Hi
A noncumulative value is a non-aggregating key figure, on the level of one or more objects, that is always displayed in relation to time. Examples of noncumulative values include head count, account balance, and material inventory. These are noncumulative in respect to time..
For example, you cannot add inventory for this month and inventory for next month to get total inventory.
There are two ways to manage these kinds of key figures. One option is to load the balance every night. The other, a more complicated and powerful solution, connects normal key figures to track the delta changes in the balance key figure. In the inventory example, this might be a key figure called Inventory Movements or two separate key figures called Inventory Adds and Inventory Subtracts. These key figures would be added to the initial balance key figure at query runtime to determine the balance in any
specific time period.............
Now .........Total sale of the Month will be a Cumulative Keyfigure.....
Non-cummulative value wih ncum value change
The key figure is a non-cumulative value. An additional key figure belongs to this key figure, which displays the non-cumulative value change.
Only those values for selected times (markered curves) are saved for the non-cumulative value. The values for the other times are calculated on the basis of a markered curve and the non-cumulative value changes in between.
Non-cummulative value with in and out flow
The key figure is a non-cumulative value. Two additional key figures belong to this key figure, which display the in- and outflow of the non-cumulative value.
Only those values for selected times (markered curves) are saved for the non-cumulative value. The values of the remaining times are calculated on the basis of the value in a markered curve, and the non-cumulative value inflows and outflows inbetween.
Santosh

Similar Messages

KF creation - Non-cumulative value with NCUM value change - option

What is the use above option in the KF creation?
Thanks

Hi,
A non-cumulative is a non-aggregating key figure on the level of one or more objects, which is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
If you use non-cumulative key figures, an absolute non-cumulative value (the marker) and all non-cumulative value changes are saved in the fact table of the InfoCube. In this way, the retention and volume of data in the data loading process is optimized. A data record is then only loaded to the InfoCube if a non-cumulative changes because of a transaction. Non-cumulatives can then be evaluated at any time in queries, using non-cumulative key figures.
Pls chk this links;
http://sap.seo-gym.com/inventory.pdf
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62ebe07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/80/1a62f8e07211d2acb80000e829fbfe/frameset.htm
Reagrds
CSM Reddy

Non cumulative with non cumulative value change

hi,
can any one tell the concept of non cumulative with non cumulative value change with an example with numbers,i am bit confused .
like we have for non *** inflow and outflow- stocks inflow and outflow so non *** is based on inflow and inflow.
in the same way any example for above concept

Hi Venkat,
If I under stand your question correctly you wish to have an example of where non cumulative values are used and you have given the value of stock? If so here is an example with figures
So you would do an initial load loading the opening balances of Stock.
Say material number 12345 = 100 units
After that, only movements will be posted so Stock will either increase or decrease depending on what image is posted via the change log.
So there will be a purchase of material 12345 for 50 units so now the balance of material is 150.
But then you could use or sell 70 units of material 12345 so you stock value would be 80 units
I hope this makes sense and this is an example that you are after if not please let me know and I'm happy to help
Regards
Ben
PS assign points if useful

How to put a page break when a value changes

Hi there, I am very new to BI Publisher. I realize this is a really SIMPLE question, but I can't seem to find a CLEAR answer.
I have a set of data that I have a repeating group for in my RTF template and it works great. But I want to have a page break each time one of the values changes and I cannot figure out how.
here is the xml
<?xml version="1.0" encoding="UTF-8" ?>

<PIR05>
<LIST_G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>123</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>614</LINE_NO>
<COUNT_NO>614</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
- <G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>1232</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>2IRE</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>615</LINE_NO>
<COUNT_NO>615</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
<G_ITEM_NO>
<PAGE_NO>0</PAGE_NO>
<ITEM_NO>4242301</ITEM_NO>
<ITEM_DESC1>13MM Aries Cell Assembly</ITEM_DESC1>
<LOT_NO>562354</LOT_NO>
<LOT_DESC>4242301</LOT_DESC>
<SUBLOT_NO />
<LOCATION>WOR RECV</LOCATION>
<GRADE_CODE>NONE</GRADE_CODE>
<ITEM_UM>Each</ITEM_UM>
<ITEM_UM2 />
<LINE_NO>603</LINE_NO>
<COUNT_NO>603</COUNT_NO>
<P_ITEMUM2LABEL />
<P_ITEMUM2DASH />
<F_ITEMUM2>1</F_ITEMUM2>
<P_CSITEMUM2_LABEL />
<P_CSITEMUM2_DASH />
</G_ITEM_NO>
</LIST_G_ITEM_NO>
<WHSE_DESC>OPM INVENTORY ORG</WHSE_DESC>
<CS_NODATA>617</CS_NODATA>
<CYCLE_NO>000000014</CYCLE_NO>
</PIR05>
I want the g_item_no (repeating group) to have a page break each time LOCATION changes.

You can declare two variables, to hold the previous and current LOCATION values and break the page when it differs.
Or just before your end-for-each, have this code.
<?if:position()!=1 and position()!=last() and LOCATION!=following::LOCATION[1]?><xsl:attribute name="break-before">page</xsl:attribute><?end if?>
Ensure that its placed in a form field.
This will have a page break when LOCATION changes.

Is it possible to generate a user event when shared variable value change on RT target?

Hi,
    I wonder if it is possible to generate a user event when a network published shared variable value change?
    Thanks a lot!
    Regards,
    Tom

Tom,
I understand not wanting to waster resources on polling but I am not aware that LabVIEW can automatically generate an event on a SV change.
Maybe a better solution...
You could implement lower level TCP communication (i.e. have a look at STM - simple messaging protocol) for passing data betweeen RT and PC (instead of using a SV). You could send a generic command (boolean trigger maybe?) from your RT system when the value of whatever it is the SV is storing has changed. You can avoid polling on the non-RT system this way.
Dan

NON CUMMULATIVE KEYFIGURE

hi everybody & kalpana,
i need brief notes regarding Non-Cumulative keyfigure.start routines & update routines.
plz help me in this issue.

Hi
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
How you model the folder for non-cumulatives in the BI system depends on your scenario. According to how often non-cumulatives change and the total number of objects for which you want to calculate non-cumulatives, you should choose one of the following two options:
Non-Cumulative Management with Non-Cumulative Key Figures:
If the non-cumulatives change infrequently, you should choose non-cumulative management with non-cumulative key figures.
If you use non-cumulative key figures, an absolute non-cumulative value (the marker) and all non-cumulative value changes are saved in the fact table of the InfoCube. In this way, the retention and volume of data in the data load process is optimized. A data record is then only loaded to the InfoCube if a non-cumulative changes because of a transaction. Non-cumulatives can then be evaluated at any time in queries, using non-cumulative key figures.
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a6305e07211d2acb80000e829fbfe/frameset.htm
If you previously worked with the ABAP form routines of the update rules and transfer rules, you have to familiarize yourself with the differences in working with routines in the transformation.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/c3963dfbde4dede10000000a422035/frameset.htm
example
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/c3963dfbde4dede10000000a422035/frameset.htm
end routine
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/c3963dfbde4dede10000000a422035/frameset.htm

How to tackle the dataflow problem when Value Change event always triggers after another GUI event

We know that Value change event always triggers after another GUI event. Eg, the user modifies string control, the user clicks on a boolean control. Then event boolean clicked is triggered before event string control value change.
Now suppose somehow the GUI event that must happen to subsequently trigger the Value change event can potentially affect the data that Value change event is supposed to work on. How can we tackle this problem ?
For example, in a mockup application that the grand purpose is to have user entered values in a textbox logged to a file (no missing information is accepted, and there is a boolean to determine how the information is logged).
There are 2 controls, boolean A when clicked (mouse down) will load random number in text box B. Text box B is designed with event structure VALUE change which saves whatever values user enters into text box B to a log file.
There are 3 problems when instead of clicking anywhere on the front panel after modifying text box B, the user ends up clicking on boolean control A.
1. Event mouse down on Boolean control A will execute first, modifying text box B content before the user entered values in B get saved.
2. The value of boolean A can potentially affect how textbox B is loggged.
3. The value of boolean A affects how the file is logged and this is indeterminate. Somehow when running this VI with no Highlighting, the textbox B Value change event executes -before- boolean A value is updated (F to T). When running this VI with Highlighting, the boolean A value is updated (F to T) (because we click on it) -before- textbox B value change event occurs. Why is it like this ?
Now the situation I made up seems non-sense, but I believe it resembles one way or another a problem that you might run into. How would you solve this problem elegantly ?

You can set the string control to "update while typing".
Are you sure appending the log to itself is reasonable? Wouldn't it grow without bounds if the users keeps entering strings or pressing the ingore button?
Why isn't the "constant" a diagram constant instead of a control. Is the user allowed to change it?
To reset just write empty strings or a false to local variables of the controls (renit to defaults" seems a bit heavy handed).
All you probably need is a single event case for "ignore:value change" and "String" value changed", no need for the local variable..
Also add a stop button and an event for it.
You don't need the timeout event.

Intensive slider control use may lead to LabVIEW hang and system instability when coupled to event loop "Value Change"

Occasionally, over the past year or two, I have noticed on different machines and versions of LabVIEW (8.0 and 8.5) that intensive operation of the LabVIEW slider control (holding down the left mouse button and shaking the mouse quickly back and forth to move the slider for several seconds) may cause LabVIEW to hang with high CPU usage (50% on my current test machine, which has a Pentium IV "hyperthreaded" processor, so 50% is the max that a single thread can take up). In some instances, after the LabVIEW process is forced to quit, the system itself becomes unstable (more high CPU usage) or hangs, up to and including the need for a hard restart. I have seen this behavior both when handling slider change events the "old fashioned" way with a while loop and a case structure; and also when using a while loop with an event structure handling the "Value Change" event for the slider.
Attached is an .rtf file dump of the front panel and block diagram of a simple test VI that replicates this problem in my hands (using an event structure). The loop count runs to at least several hundred iterations before the crash occurs.
At least for the "old fashioned" loop handling method, adding a forced wait of a few dozen msec per loop didn't seem to be a workaround. I haven't tried this idea with the event structure, but don't expect joy to follow. The possibility of a system hang discourages aggressive experimentation.
Is this a known issue? Can anyone else replicate it (carefully)? In any case, I'd welcome other suggestions for workarounds.
Thanks,
Darin Nelson
Attachments:
Hang Slider.rtf ‏683 KB

Thanks for all your responses, and especially to those who are waggling their mice around trying to reproduce this. I'll respond to (most aspects of) the last several posts in one message.
LabViewGuruWannabe:
I'll see if I can get the original code to post in a separate message, I posted the .rtf originally because I thought there might be filtering on forum posts (I'm sort of new here). But I doubt you re-created it wrong.
The "more modern" test hardware was an Intel Core2 , 2.4 GHz, 2Gb RAM, on an Intel 965 family motherboard. As I said, it took me two tries to trigger the error on this hardware; in the case where it triggered, I was at almost 12000 iterations before things went south. 10000 iterations, therefore, might not be enough--or you might never get it, for all I know. My Pentium 4 Hyperthreaded machine (3.2 GHz, 2 Gb RAM) triggers the hang much more easily (always within 2500 iterations, usually within 1000), so there seems to be some hardware dependence here. Maybe the workaround is just to use hardware recent enough that no one not under the influence of strange compulsions will accidentally trigger the hang.
TonP:
After reading your suggestion, I tried something even more radical -- getting rid of the handling code altogether. I took the slider node out of the while loop, and removed all code inside the "Slide" case of the event structure.
On my Pentium 4 machine, the hang triggered after 677 iterations.
Brian Beal:

Huh, I never even noticed that checkbox existed. Anyway, yes, I
kept the default to lock out the front panel while the event process. If I
disable it… I still get the hang.
Message Edited by dman on 02-04-2008 06:36 AM

SSRS report with tabular model – Create a dropdown report parameter with "None" option as the top value.

Hello Everyone,
I would like to create SSRS single select dropdown list parameter (it is using MDX query in dataset) with "None" option at the top. Note: this parameter is dependent parameter and getting filtered based on the selection of another parameter.
How can I add hard-coded "None" text at the top of the parameter values? Can Union function help me to add this hard-coded value? The purpose is, when user selects None from the dropdown ignore the condition of the parameter from MDX query else
use the selected value in query condition.
Thanks, Ankit Shah
Inkey Solutions, India.
Microsoft Certified Business Management Solutions Professionals
http://www.inkeysolutions.com/MicrosoftDynamicsCRM.html

Hi Ankit,
In your scenario, you can achieve your requirement in report level other than in query. Add a Filter like:
Expression: =IIF(Parameters!Name.Value="None",1,Fields!Name.Value)
Operator:=
Value: =IIF(Parameters!Name.Value="None",1,Parameters!Name.Value)
In this case, report will ignore this parameter, and show all the records on the report when selecting “None” value. I have tested it on my local environment, the screenshots below are for you reference.
Reference:
Add a Filter to a Dataset (Report Builder and SSRS)
Regards,
Charlie Liao
TechNet Community Support

Line Item Value change in MIRO Transaction

I have one requirement i.e as follows.
<b>Line Item Value change in MIRO Transaction</b>
After getting the items in table control of the miro screen of a particular order.
I have to clicked on edit own condition of selected item.
then it will show another screen ( create invoice document item - conditions)which have the all condtions details like
Fra1 , frb1 , sd% , Penalty % , gross price , frieght charges etc.
In this screen first time it is showing line item as
in the miro intial screen i.e. if u click po item
10 it will show 10 only.
after updating fra1 value , i came back to the main screen at that time it is asking that select the any one of three.
after selecting manual selection its fra1 was changed.
once again if i go to the same line item by clicking
the edit own condition(13 column if u select all information in textbox whixh is above tablecontrol right corner) it is showing line item as 1 in screen ( create invoice document item - conditions) which should be line item as 10. ( here i took line item as 10)
Please clarify this, why it is showing
first time as a original line item and
after updating it is showing like
for line item 10 -
1
               20 -
2
              100 -
10
              110 -
11.

"...it does not work..." is probably the worst description of a problem you can imagine. As an application developer you should know that. Do you use firebug to see what happens once it "does not work"? Any better hints?
Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.apress.com/9781430235125
https://apex.oracle.com/pls/apex/f?p=31517:1
http://www.amazon.de/Oracle-APEX-XE-Praxis/dp/3826655494
-------------------------------------------------------------------

Multicolumn listbox value change and mouse up event in one case of event structure

Hello All,
Am facing two problems:
1. I have two multicolumn events, one is value change for deleting the rows of Multicolumn listbox and another one is mouse up for sorting the columns. But I can't combine both the events in one case. And if I create two separate cases then each time the event of mouse up executes and sorting takes place irrespective of selection of delete event.
2. I have a selection VI in which user selects which parameter he wants to show it in a multicolumn listbox. I want this parameters to be retain or stored when next time I run the VI after closing it.
Am using LabVIEW 11. Pls reply soon.
Thanks & Regards,
Manisha

try this
Beginner? Try LabVIEW Basics
Sharing bits of code? Try Snippets or LAVA Code Capture Tool
Have you tried Quick Drop?, Visit QD Community.
Attachments:
Untitled 2.vi ‏12 KB

Double value change event if cursor is set busy (LV2009)

Hello everybody,
I just migrated from LV 8.0 to LV 2009 (on linux) and now got problems with a value change event. I want to send a command if a button is pressed and send another one if the button is released. After sending the command I need to wait for an acknowledge from the receiver and to avoid user interaction in between I lock the cursor with "set busy" VI until the acknowledge is received. To see, when the button is pressed or released, I use a value change event. Inside the event structure the cursor is set busy.
This worked reliable in LV 8.0 but not any more in LV 2009. The button's mechanical action is set to "switch until released" and if I press the button and keep it pressed it is reset to false automatically. The value change event is fired twice instead of only once (see attached vi) and "new value" is one time true and one time false. This doesn't happen if the mechanical action is set to "switch when pressed".
Does anybody have an explanation or a workaround for this behaviour? Am I doing something wrong or is this a bug in LV? For now I'll just keep the cursor unlocked.
Thanks for your help.
Attachments:
setMouseBusy_01.vi ‏11 KB

Hi ckis,
attached you'll find your modified example, it should do the trick now.
Regards,
Bernd
Attachments:
setMouseBusy_01.vi ‏9 KB

Using a Global as a value change in an Event Structure

I have many events I want to react to based on Global buttons. How do I get the Event Structure to recognize a global button value change? This screen shot is one of my many attempts. So far my events only change with a real button on the FP.
Thanks in advance,
Doug
Attachments:
Event Structure.JPG ‏147 KB

nonecure wrote:
Jim,
The Value (Signaling) does not work either.
I would rather not use a notifier, so maybe I need to get away from using an event structure.
Thanks
It should work if your code was executing correctly. The image you posted...
may be the reason.
If you watch the code in execution highlighting it may help you figure what is happening.
1) There is no guarentee that "initialize" will be written to the local "State" before the loop starts running. Use a shift register to track your state from iteration to iteration.
Do you get any errors?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

How can I fire an event case on the value change of an indicator, or a network variable?

Hi! I have an event structure setup to look for a value change of an indicator on the front panel. The indicator is updated by the value of a boolean network-published shared variable through a seperate parallel loop that is polling all of the network-published shared variables. The event, however, does not fire when the indicator changes value. I have switched the indicator to a control and tested it with user interaction and that works just fine.
I want to use the event structure space for my code exectution because it seems logical that that is where it would go, and it will help keep my block diagram tity. The code is also something I would like executed with the front pannel temperarily disabled. I would rather not have the code in my network-variable polling loop because again the tity issue. I would also rather not use a notification VI wired to an independent loop for this particular code.
Is there a way to have an event structure fire an event with the value change of an indicator, or a network variable directly?
Thanks for your input.
LV 8.5
-Nic

Thanks for the reply.
I went about things a little differently, but got them to work so..... . It really was not my desire to have a boolean indicator on the front panel. As previously stated, my ultimate goal was to have an event fire on the change of a network variable, which I had to poll for anyway but that is tucked away in a section where I am handling all my network variables. I ended up using that Create User Event, Register User Event, and Generate User Event SubVIs to handle the task.
I've read the help for all of those SubVI's and it is not entirely clear to me if the event fires every time the "Generate User Event" receives some inputs, or if it only fires when the value changes. I could do a test to find out. It wouldn't be too difficult to add a shift register or a feedback node and place the Generate User Event in a case structure so that it is only fired when the input changes state.

New Page in ALV for Value Change on a Field

Is it possible to trigger a new page while prinitng from ALV whenever a value changes in a column.
Thank you,
Shashi Reddy

Hi,
Yes it is possible to add page breaks on a particular column while previewing/printing from ALV.
Declare a structure like
DATA: gs_print    type lvc_s_prnt.
and before calling set_table_for_first_display, write
gs_print-grpchgedit = 'X'.
Now pass this structure to the method as follows:
    call method grid->set_table_for_first_display
         exporting
           is_print         = gs_print
           is_layout        = gs_layout
           is_variant       = gs_variant
           i_save           = 'A'
           i_default        = 'X'
         changing
           it_fieldcatalog = gt_fieldcat[]
           it_outtab        = g_t_outtab[]
           it_sort          = gt_sort[].
Run the report. Now when you are in the print preview mode, press the sort ascending or descending button on toolbar (without selecting a column). A dialog box appears asking for sort order. Add the required field, from the available list on right hand side, on which you want a page-break. In the last column titled NG of this sort order dialog box, write * for page feed or UL for line feed. Press Copy button to see the effect.
Hope this helps.
Regards
Shehryar

Non-cummulative KF wih NCum value change

Similar Messages

Maybe you are looking for