Non-cumulative initialization is not possible with historical data
Hi all,
While loading inventory cube.. 0IC_C03 .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
<b>Non-cumulative initialization is not possible with historical data</b>
Regards
siva.
You sure you didn't use BF instead of BX? This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time... Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.
Similar Messages
-
When I connect my iPhone 5 to my laptop and iTunes, I can't play movies from the iPhone on my computer.Why is that? Can I do this or it's not possible with iPhone5? With my iPod it's no problem.
Reinstall iTunes. Make sure you follow the instructions in this support document to the letter. http://support.apple.com/kb/HT1923.
You may have some problems because Apple has not certified that everything works with Windows 8 yet. -
Multiple usage of Source System is not possible with installed DMIS version on source
Hello folks!
I`ve got a problem trying to adjust the Data Replication to SAP BW (on HANA) using SAP LT Replication Server.
I`ve deleted one connection and after that I`m trying to create new one through Configuration & Monitoring Dashboard (transaction LTR) with the same source / target systems.
As result when on the second step (Specify Source System) I specify RFC destination of the source system it appears an error with text
"Multiple usage of Source System is not possible with installed DMIS version on source".
But there`s no any adjusted connection in system now..
Please, help me to understand how to fix that problem, I can`t find a solutionHi,
When you say that you 'deleted one connection', did you delete the RFC connection or the SLT Configuration? If it is not a real multiple usage scenario, then deactivate the 'allow multiple usage' flag, else install the correct DMIS version on both SLT and source.
Thanks
kris -
Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194
See if this helps : http://support.apple.com/kb/TS3694#error3194
-
Goods movement not possible with mvmt type 991
Hi,
As per requirement I need to create a GR for Purchase order wise. I tried to create using BAPI BAPI_GOODSMVT_CREATE but It returns the error message.
error: Goods movement not possible with mvmt type 991
LOOP AT gt_outtab1.
gt_outtab1-gr_wght = gt_outtab1-gr_wght.
MOVE: gt_outtab1-matnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'901' TO gt_item-move_type,
gt_outtab1-gr_wght TO gt_item-entry_qnt,
'B' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor,
gt_outtab1-ebeln TO gt_item-po_number,
gt_outtab1-ebelp TO gt_item-po_item.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE bqty IS NOT INITIAL.
MOVE: gt_outtab3-bmatnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'991' TO gt_item-move_type,
gt_outtab3-bqty TO gt_item-entry_qnt,
'' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor.
APPEND gt_item.
ENDLOOP.
CLEAR gt_item.
LOOP AT gt_outtab3 WHERE pqty IS NOT INITIAL.
MOVE: gt_outtab3-bmatnr TO gt_item-material,
gt_zseed_po_qty-werks TO gt_item-plant,
gt_zseed_po_qty-lgort TO gt_item-stge_loc,
'942' TO gt_item-move_type,
gt_outtab3-pqty TO gt_item-entry_qnt,
'' TO gt_item-mvt_ind,
'1' TO gt_item-stck_type,
v_lifnr TO gt_item-vendor.
APPEND gt_item.
ENDLOOP.
***********Call goods movement BAPI
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
goodsmvt_header = gs_header
goodsmvt_code = gs_code
IMPORTING
goodsmvt_headret = gs_headret
materialdocument = gs_retmtd
matdocumentyear = gs_year
TABLES
goodsmvt_item = gt_item
return = gt_return.
so could you please let me know which are the parameters I need to pass to create GR?
regards,
tarunHi,
Go to T.code OMJJ . Give your your movement type 991. Check the allowed transaction and all the details in your left hand side and the settings done.
Thanks
Arbind -
Goods movement not possible with movement type 702
Hi experts,
I have created a new movement type 702 (a copy of 602) for return delivery from customer.
When I create delivery I did not face any issue. However while doing post goods issue, I get error
"Goods Movement not possible with mvmt type 702."
Is there any configuration missing for post goods issue?
Please advise.
Thanks,
PriDEAR,
AFTER CHECKING IN "OMJJ" ...SEE WHETHER YOU HAVE NOT BLOCKED THIS MOVEMENT...
ALSO SEE IN OPTION WHETHER ALL TRANSACTIONS HAVE BEEN ENTERED LIKE
"MI01"
"MI02"
"MI31"
"MI07"
"MI37"
WE ARE PERFOMING THIS ACTIVITY USUALY SO PLZ PERFORM IT,,WE ACTUALLY BLOCK THIS MOVT TYPE AFTER ARE PHYSICAL INVENTORY...
OR EVEN IF THESE DOESNT WORK..
GO TO "SU01" IN WHICH PUT THE USER ID AND CHECK IN AUTHORISATION WHICH PROFILE IS ASSIGNED TO IT..
REGARDS
REWA -
I need to generate a still shot from from a video I made with my camera. I would like to accomplish this task using a single application. If this is not possible with my MacBook Pro as purchased from Apple, please recommend which applications I can purchase that include this feature. Thanks in advance.
For FREE do the following:
When you get to othe part of the video you want a still shot from, put the video on pause.
Take a screen shot: Apple>Shift>4 - which will produce a cross hair so you can manually select which part of the video you want.Check inside either your Applications or Utility folder for an app called Grab. Will do the above with just a single click.
If you still want to purchase software, suggest that you do a Google & MacUpdate search. This way, you can find exactly what you want. -
KANBAN - STO (error : Goods movement not possible with mvmt type 351)
Hi,
I have configured KANBAN STO in the system which is working fine.
I am able to empty the bin and create STO (purchase orders)
But when I select a bin and try to make it full, system gives error message:
"Goods movement not possible with mvmt type 351"
In KANBAN STO replenishment strategy, I have used movement type 101,
I m little confused from where this 351 movement type is coming from.
Please help resolvethis issue.
PavanHi,
Below is the entire message:
Goods movement not possible with mvmt type 351
Message no. M7096
Diagnosis
You have entered a movement type that has not been defined for this transaction/event.
Procedure
Choose another movement type.
You can choose the movement type as follows:
If you know the movement type, enter it directly in the Movement type field.
Choose the movement type via the menu option Movement type.
Choose the required movement type from the possible entries.
If you do not find a suitable movement type, exit this function and choose a different goods movement from the Inventory Management menu.
Pavan -
Goods movement not possible with mvmt type 961
hi all,
i got a error as Goods movement not possible with mvmt type 961
Can any body help me to know whether i can create GR for mvmt type 961.
mvmt type 961 is for third party transferGetting errors while using PI_GOODSMVT_CREATE' with 561+K
-
Goods movement not possible with mvmt type 561-error
Dear All,
I am using bapi BAPI_GOODSMVT_CREATE for goods movement. i am gettining Goods movement not possible with mvmt type 561 error.
please suggest me. i am using serial number also.
regards,
satishGetting errors while using PI_GOODSMVT_CREATE' with 561+K
-
'Goods movement not possible with mvmt type 102'
Dear Experts,
I have to reverse the GR and I am using BAPI -> BAPI_GOODSMVT_CREATE and passing below information but I am getting error message as 'Goods movement not possible with mvmt type 102'. Could any one please tell me what would be the possible reasons to get this error and how can I fix this.
goodsmvt_header-PSTNG_DATE = 20110705
goodsmvt_header-DOC_DATE = 20110705
goodsmvt_code-GM_CODE = 06
goodsmvt_item-PLANT = 1400
goodsmvt_item-MOVE_TYPE = 102 <<< Reversal movement type
goodsmvt_item-ENTRY_QNT = 02
goodsmvt_item-ENTRY_UOM = SET
goodsmvt_item-PO_NUMBER = W299999508
goodsmvt_item-PO_ITEM = 0010
goodsmvt_item-MVT_IND = B
goodsmvt_item-XSTOB = ''. << space to use reversal types
Thanks in Advance
VenkatHi Please provide Material Document, Document Year and Posting date as shown below
MATDOCUMENTYEAR = DOC_YEAR.
GOODSMVT_PSTNG_DATE = POSTING_DATE.
MATERIALDOCUMENT = MAT_DOC
CALL FUNCTION 'BAPI_GOODSMVT_CANCEL'
EXPORTING
MATERIALDOCUMENT = MATERIALDOCUMENT
MATDOCUMENTYEAR = MATDOCUMENTYEAR
GOODSMVT_PSTNG_DATE = GOODSMVT_PSTNG_DATE
GOODSMVT_PR_UNAME =
IMPORTING
GOODSMVT_HEADRET = WA_GOODSMVT_HEADRET
TABLES
RETURN = IT_RETURN
GOODSMVT_MATDOCITEM =
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'. -
Some futures in bpel which are not possible with ESB and vice versa
Can anyone please tell me some futures in bpel which are not possible with ESB and For some features available in ESB that are absence in BPEL?
I think you've mistaken the meaning of both technologies. ESB actually works as a part of BPEL, for instance you can create partner link from any esb service.
ESB service can only expose data or retrieve and process (transform) them from another service. BPEL is using services like ESB as a source and adds decision making functionality which is not present in ESB. -
HI MM Folks,
My requirement is reservation should be created with 311 movt type. When we do good issue with 201 movt type with reference to reservation
system is throwing an error "Goods movement not possible with mvmt type 311". Due to MRP run we should create a reservation using 311 movement type but not 201 mvt type, (If we create a reservation 201 movt type, during MRP run automatically reservation quantity also taking into consideration, to avoid this we will be creating reservation as 311 movt type). Is there any enhancement to available to reach the requirement. If it is possible give me guidelines.
your help will be highly appreciable.
Regards
VinayDear,
Movement type 311 is for doing transfer posting from storage location to storage location with single step.But Movement Type 201 is to have consumption entry with respect to cost center etc...
You are creating a reservation using 311 movement type and while posting the entry you are selecting the"Executable action in MIGO" is "A08-Transfer Posting" so system will always use the movement type used at the time of reservation only.Here you can not change.
And more over if you process entry with 201 movement type system creates accounting documents but with movement type 311 system will not create accounting documents.
Regards,
Pardhu -
Cannot cancel a GR: Goods movement not possible with mvmt type 502
Hi,
I was trying to cancel a goods receipt for an inbound delivery. However I ran into trouble with the following error message.
Goods movement not possible with mvmt type 502 .
Is there some configuration that I would be needed to make before I can cancel a goods receipt?
Thanks,
ArupTo expand on the above some,
check the mvmnt type used for the origanal GR and use the coresponding reversal mvnmt type.
or confirm for us that the origanal receipt was in fact a 501??
Edit: or use migo to cancel the GR doc.
cancelation > material doc
this will only be possible if the stock is still available (same status as well) -
Goods movement not possible with mvmt type 109
Hello All!
I have following problem. I try to book the goods receipt with VL32n and movement type 109 and get following message: M7096 Goods movement not possible with mvmt type 109
- First I created a PO with Confirmation Control Key Inbound delivery
- Goods receipt ist booked with movement type 107 with MIGO
- I created an inbound delivery with movement type 109
Finally I want to book with VL32n the goods receipt, but the booking fails with error message 109. Any idea why.
Regarding some OSS notes, I thought that it could work this way.
Hoping for help,
Barbarai am not sure that i read you correctly
the process for inbound delivery is
create PO; in PO conf control key set to inbound del.
create inbound del in vl31n
do MIGO on inbound del
if the inbound del is with 107 mvmt type the GR will bring it to valuated block stock
do 109 to move it from valuated block stock to unresticted stock.
Maybe you are looking for
-
How do i move an intem in the music folder to the book folder
How do I move an item from music "folder" in my nano to the books "folder"?
-
Microphone no longer works with ear piece
I have a BB 9800, and I recently downloaded the latest 6.0 OS Bundle 2921. Since then, I cannot use the ear piece when making calls. The speaker/handset menu goes back and forth and there is no sound in the ear piece. I can no longer take calls in th
-
Import .pdf and ai file in indesign cc
Hi, I'd like to know if there's a way to import pdf and ai files in indesign cc 2014? Thanks
-
TREX Conig for E-Recruitment System ?
Do you have any useful info fo TREX Configuration in a E-Recruitment System ? Rgds
-
Hello, According to the cisco documentation you can stack up to 4 FWSMs in one chassis. The document says that the bandwidth will increase however it says nothing about the maximum number of concurrent connections. One FWSM is suposed to handle 1 mil