Non-cumulative values do not update on report

hi,
I have created cube with non-cumulatives but on reports they are not updated. I can see values for inflow but not for non-cumul itself.
Does somebody knows what could be wrong?
Regards,
Andrzej

hi,
what do you mean by date restriction?
Time reference char is 0calday, I have 0calday in validity table and tine char in query are 0calday and 0calmonth. I do not use restricted KFs in query.
Regards,
Andrzej

Similar Messages

  • "initial non-cumulative for non-cumulative values"  is not available in DTP (0AFMM_C02)

    Hi Experts,
    We are working for BI implementation for AFS Industry,
    when we are working on AFS specific inventory cube 0AFMM_C02 , we are facing stock mismatch problem
    for AFS Stock initialization we are using the data source 2LIS_AF_STOCK_INITALIZATION instead of 2LIS_03_BX, this data source is specificly designed for AFS
    when we are extracting the data using 2LIS_AF_STOCK_INITALIZATION for stock initialization and
    2LIS_03_BF data source to load the Moments.
    we compressed cube with Marker update for 2LIS_AF_STOCK_INITALIZATION data load(by deselecting the No marker update check box)
    we compressed cube with No Marker update for 2LIS_03_BF historical data load(by selecting the No marker update check box)
    we compressed cube with Marker update for 2LIS_03_BF Delta data load(by deselecting the No marker update check box)
    Now we are facing stock mistach problem, we found reason for this
    "initial non-cumulative for non-cumulative values" option is not available in DTP only Delta & Full options are available
    and infopackage of  2LIS_AF_STOCK_INITALIZATION data source also has "Full update" instead of "Generate Intial Status"
    Please let us know how can we get the "initial non-cumulative for non-cumulative values" option in the DTP level.
    Regards,
    Chandra

    Hi Chandrakumar,
    We are facing the same problem, how do you solve it?
    Regards,

  • Inventory Non cumulative values are not showing correct result

    Hi Guys,
    I have created a report on Inventory cube taking material in rows and 0T0TALSTCK and 0VALSTCKVAL in colums and i created a variable on calender day . What ever the date if we give we will get the quantity and value as on that date.
    Here Quantity is showing perfectly and in case of value it is showing wrongly. In this case the interesting thing is if we substract the  (Reciet value - Issue ) value then i am getting the correct value.
    Some times Even quantity is zero the noncumulative keyfigure (0VALSTCKVAL)is not showing zero it is showing some value but if i do (Reciet value - Issue ) it will show correctly.
    Please help on this issue.
    Thanks & Regards
    K.Srinivas

    Hi,
    when the quantity is correct, then you have a problem with the values. You have loaded the infocube correcly.
    check your keyfigures and the transformation with the BI content.
    => for example: do you have the coding in the BF transformation?
    * see OSS note 571669
        LOOP AT SOURCE_PACKAGE ASSIGNING <SOURCE_FIELDS>.
          IF <SOURCE_FIELDS>-stockcat EQ 'V' OR
             <SOURCE_FIELDS>-stocktype EQ 'V'.
            DELETE SOURCE_PACKAGE.
          ENDIF.
        ENDLOOP.
    => you have used the datasource 2LIS_03_UM. There are no quantities. Is there your problem.
    Sven

  • Non-Cumulative value Infoset will not work

    Why doesn't an Infoset work with non-cumaltive values? Can I just use a multiprovider to get around this issue?

    Hi,
       Non cumulative values are not stored anywhere in the database. These are just definitions which are calculated at runtime. Consider the Stock cube. It has 2 key figures. Received stock and issued stock. It also has a Non cumulative Kf total stock which is defined as inflow : Received stock and outflow : issued stock.
    At Query runtime, the total stock is calculated as inflow - outflow. No data is physically stored in your database.
    Since an infoset joins values stored in a database, you will not be able to use it for Non cumulative values.
    What you can do is find your Non cumulative KF definition, and map the input fields for this KF. You can then try and use these fields to calculate the value as a formula.
    Hope this helps.
    Regards.

  • Non-cumulative Values not showing in Inventory Management Queries

    Hi:
    Has anyone had a problem with the new version and Non-cumulative key figures not showing up in Bex for Inventory Managemet reports? Specifically, they showed and validated back to ECC for our Development and QA boxes but now in our Regression box they are all showing zeros. Our Cumulative values are all showing correctly still within the Regression box. For example, Total Receipts and Total Issues are correctly poplating values but Total Stock is not.
    I have checked and validate that the configuration in the Regression box matches or Dev and QA box.

    Found the problem.  It had to do with the compression variant in the delta process chain.  The compression was set to 'no marker update'.  Since we only started receiving measureable deltas in or regression box this is where the incorrect setting showed up.  Reinitalized and the deltas are working correctly now.

  • KP06 Plan Values are not updating in Cost center  report

    Hi,
    I have configured KP06 and uploaded through excel,It is getting uploaded successfully.
    But after uploading planned values are not updating in the S_ ALR_87013611 Report.
    What could be the reason.kindly give me some inputs regarding this.
    Thanks
    Supriya

    Hi Supriya,
    After uploading the entries have you saved or have you verified with excel values.
    Please check.
    Sateesh

  • The InfoCube contains non-cumulative values

    Hi,
    While creating multicube for inventory on two cubes its askin the below "The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
    The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube)", what is that and how to solve this,
    Please through some light on this its urgent.
    Chandan

    Hi,
    Your multi cube is probably based on the infociune 0IC_C03 containing non cumulative key figures taht's why you get this message.
    You generaly don't have to maintain validity area unless you are in a special configuration (for exemple loading data from two source systems).
    UThe following link should give more information about validity area with non cumulative :
    [http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw04/helpdata/en/02/9a6a1c244411d5b2e30050da4c74dc/frameset.htm]
    Hope this helps.
    Cyril

  • Maintaining non-cumulative values in Mlti provider

    Can we maintain non ucmulative values inteh multi ptovider   Extras - > Maintain non cumulative values section.
    I created few new cubes which has non cumulative keyfigures . In the cube I made 0CAL DAY as reference characteristic and selected  Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.
    Now I inlcude the new cubes and identified the non cumulative key figures in the multi provider.
    Now here also do I need to   make 0CAL DAY as reference characteristic and selected  Company code (0COMP_CODE) and Posting date in the document (0PSTNG_DATE) as characteristics of validity table for non-cumulatives.I did not find an option in Extras - > Maintain non cumulative values in multi provider. CAn we maintain non cumulatives in MP ?

    Hello,
    You dont need to maintain it at the MP level also.
    Non-cumulative parameters are manitained only at the cube level.This was the case in 3.x so it should be the same in 7.0 also.
    Regards
    Ajeet

  • Non-cumulative values

    HI All,
    when I run a query of a non-cumulative infocube,there's always a "initial record"  which actually doesn't exist in the fact table. Documents say "This entry does not remain physically in  the table, but it is available for rebuilding the non-cumulative values". So where exactly is the initial value stored ?
    Thanks
    han.

    Hi,
    What is teh DataSource and InfoCube?
    If you are talking about 0IC_C03, please see the steps.
    Treatment of historical full loads with Inventory cube
    Setting up material movement/inventory with limit locking time
    See about  Non-Cumulatives 
    http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/da1640dc88e769e10000000a155106/content.htm
    Thanks
    Reddy

  • Asset acquisition value is not updating in Asset history sheet & AW01N

    Hi,
    The issue is the asset acquisition values are not updated in AW01N & Asset history sheet report for particular asset acquisition transaction only.
    it`s showing in asset history sheet but its nt added in the current APC value in the asset history report & also its showing in AW01N transaction but in acquisition change column its not updating.
    I have also checked the below link but still i am persisting the same problem.
    Asset acquisition value not updating
    Regards
    Amit

    Hi Amit,
    check note  366848.
    Implement reports RACORR110_B and the report RACORR55 from the note 366848 in your system.                                                                               
    At first run the report RACORR110_B. Check the  field ANLC-ANSWL bevor and after running the report.                   
    The report RACORR110_B accumulates the values of the asset line items  and writes the result in the field ANLC-ANSWL.                                                                               
    After this, please start the report RACORR55. This report forwards the  values in the following year.
    (If this is not the reason (ANLC is correct), the report makes nothing.) 
    Regards Bernhard

  • Non-cumulative value KF

    Hi:
    I have given the Aggregation as SUM  and the Excepiton Aggregation as Last Value for a non-cumulative KF Quantity Total Stock  for Inventory. I am using Non-cumulative value with in- Receipt Quantity Total Stock and out-flow Issue Quantity Total Stock. Then I can calculate Quantity Total Stock  in Query.
    But I have another requirement, I want to a KF to count  0Material  whose Quantity Total Stock not equal 0.  In fact, for a Non-cumulative value, the Aggregation reference char of  KF Quantity Total Stock   is 0calday, but what I want is 0Material.  How could I create such KF?
    Many thanks in Advance!
    Points will be assigned!

    Hi,
    The basic purpose of Non-cumulatives is to get the values for them depending upon the Time Characterestics alone and not on any other characterestics. As far as I know you cant use 0MATERIAL as the aggregation reference Char.

  • How to load init for non cumulative values?

    Hi folks,
    anyone here, who can tell me how to load initial amounts from DSO to non cumulative values in InfoCubes?
    I found only poor documentation about this.
    Thanks!

    hi Timo
    you load initial of load as you do in the normal case only thing you have to keep in mind that before loading opening balance you have to UNCLICK  NO MARKER UPDATE from the infocube and compress the request ASAP as it will greatly effect your query performance.
    sanjeev

  • Non-cumulative initialization is not possible with historical data

    Hi all,
    While loading inventory cube.. 0IC_C03  .. after loading 2LIS_03_BX request get sucessful. while compress that request No Marker update. i getting following error msg.
    <b>Non-cumulative initialization is not possible with historical data</b>     
    Regards
    siva.

    You sure you didn't use BF instead of BX?  This messge indicates that you have historical data in your cube whereas BX only loads a fixed state at a specific point in time...  Or maybe, did you initialize BX twice in R/3 without deleting the previous init, I don't know if that could cause that error but it's another possibility.

  • Non cumulative with non cumulative value change

    hi,
    can any one tell the concept of non cumulative with non cumulative value change with an example with numbers,i am bit confused .
    like we have for non *** inflow and outflow- stocks inflow and outflow so non *** is based on inflow and inflow.
    in the same way any example for above concept

    Hi Venkat,
    If I under stand your question correctly you wish to have an example of where non cumulative values are used and you have given the value of stock? If so here is an example with figures
    So you would do an initial load loading the opening balances of Stock.
    Say material number 12345 = 100 units
    After that, only movements will be posted so Stock will either increase or decrease depending on what image is posted via the change log.
    So there will be a purchase of material 12345 for 50 units so now the balance of material is 150.
    But then you could use or sell 70 units of material 12345 so you stock value would be 80 units
    I hope this makes sense and this is an example that you are after if not please let me know and I'm happy to help
    Regards
    Ben
    PS assign points if useful

  • Value is not updating to infoobject

    Hi experts,
    I am facing a strange issue.
    Issue is , Value is not updating to the infoobject in master data attribute.
    I am able to see the value at PSA level.
    what may be the reason, the object is consistent.
    regards,
    rajesh.

    Check the transformation for the master data attribute and make sure it is mapped to the right field from source.
    Also check if there is any start routine written and if you are deleting records in that.
    Make sure that once the load is completed, the request is green, available for reporting and some records have been addes as well.
    Another thing need to be checked is if you have written any routine for the attribute which may cause no data because of the logic in that code.
    Do these checks and provide some more details if issue is not resolved.
    Regards,
    Gaurav

Maybe you are looking for