Non-English fonts not rendering correctly in iMovie 10.0.3?

I use xenotype Tibetan font in iMovie and it has always rendered correctly until I updated from 10.0.2 to 10.0.3. Now many of the stacked characters do not render correctly in any of the titles. Even projects that I made three months ago with 10.0.2 when opened in the new version render the font incorrectly. Is there a reason for this change? Is there any adjustment I can do? Line-height adjustment? iMovie 10.0.3 seems to be the only Mac software currently made by apple that doesn't render the font correctly.

Hello,
Welcome to the discussions. There have been some transition problems reported, although maybe not so many problems as you are experiencing.
I had the black/flash with the transition cross-dissolve in one of my movies recently. I found the suggestions in this thread to resolve that: http://discussions.apple.com/message.jspa?messageID=3842119#3842119
Have a look and see if it can help you.

Similar Messages

  • Non-English characters not displaying correctly - Serious Issue

    My corporate email is on a Lotus Domino server with Lotus Traveler installed.
    I have set my PlayBook (with OS 2) up to syncronize with the corporate email trough Active Sync (see http://alturl.com/qh3nn), which works perfectly.
    I have however noticed that in some emails special non-english characters are displayed correctly but in some emails special non-english characters are displayed as a black diamond with a question mark inside.
    This is of course a serious issue as most non English speaking countries use some special characters.
    When trying to understand this problem how can I analyse the emails and see what character set is being used?
    And of course better; has someone solved this?

    I am having the same problem. Is there any update available?

  • Olde English font not displaying correctly

    I'm trying to use and Olde English font. When I use it in TextEdit, works great but when I use it in Pages, it is being substituted with something else.
    I have screenshots of each if that helps.
    Thoughts?

    I'm trying to use and Olde English font. When I use it in TextEdit, works great but when I use it in Pages, it is being substituted with something else
    Off the cuff, bets are you have a broken SFNT Spline Font file, that is, somebody's been at the tables that lay out the type in the line. Trying to figure out what's the matter with a font file from an unknown source without being able to determine the state of the tables in the font file is tough troubleshooting. In general, type should be treated as any other application program - you buy a licence, you get support, you get upgrades with bug fixes and beautiful new features. Would that it worked that way.
    /hh

  • Filename in non-english are not saved correctly

    hi
    I recently (last week) installed archlinux.
    I come from manjaro so I am to some extent familiar with archlinux.
    now I am trying to solve some issues that have poped up in arch that there were not in manjaro( mostly because manjaro was pre-configured).
    when I use jdownloader to save youtube videos the files names are displayed correctly in jdownloader but not in konsole or dolphin file manager. (they are shown as "????" characters).
    this happens for Persian and Russian characters.
    I thought this was jdownloader issue but this doesn't happen on my pc that has a manjaro installed on it.
    and another thing that makes it weird is that if i create files in dolphin with say Persian language they are shown and treated correctly. but the ones that are created by jdownloader have this issue.
    and another related symptome is that some files that I download from subtitle websites that are in zip format and have some rare European characters in them (like the French and German ones) I cant open them or extract them in dolphin file manager.
    I had a similar issue like this in manajro but in manajro I used file-roller to open the files and that app would work with this files correctly.
    but in archlinux even file-roller has this issue.
    can somebody help me with this?

    Lone_Wolf wrote:
    rezad,
    it was a long time ago i had that problem and locale handling is like a black box to me.
    It's easy to reverse if it doesn't help though, why don't you try it ?
    I have tried it.
    adding other encoding before the famous en-US,UTF-8 one gives warning for default lang and falling back.
    I see these error when running apps from command line.
    adding other encodings after that encoding doesn't show this warning but i have a suspicion that it mean that other encoding are suppressed,
    i have to try it with a file with a wired but known encoding and then adding that encoding to config and testing again.
    my problem is how do i find the filename encoding?(not find content encoding)
    this is the file in question. can somebody tell me what is the filename encoding?
    https://www.sendspace.com/file/fwmxpc
    EDIT:  my findings on this matter.
    even adding all the langs to /etc/locale.gen and then using locale-gen command doesnt fix this. cause this are different issues.
    this problem as a whole doesn't have a solution, cause linux unlike windows doesn't have a default inbuilt filename encoding and it all depends on your environment.
    linux just treat the filename in the encoding you tell it. so it cant detect anything cause there is nothing to detect.
    from its perspective filename are just binary data ready to be interpreted as wished by the user.
    widows on the other hand uses UTF-16.
    plz if anybody have another contradicting point ,then reply but plz dont say I have to use correct encoding. the only way to fix it is using convmv util and that requires finding the correct original encoding.
    thanks for all the replys.
    Last edited by rezad (2015-04-20 14:45:14)

  • [solved] GTK3: Fonts not rendering smoothly

    Here's GTK3 app and GTK2 app side by side:
    Fonts are not rendering correctly on any GTK3 app. I use Ubuntu's patched versions of freetype2, fontconfig and cairo from AUR:
    freetype2-ubuntu fontconfig-ubuntu cairo-ubuntu
    How can I get GTK3 apps to render fonts correctly? I don't use any DE, just dwm as window manager.
    Last edited by NAND (2013-01-28 16:14:41)

    Stupid me!
    The cairo-ubuntu from AUR had failed to build. Followed Ichigo-Roku's tip in comments and now everything works.
    Ichigo-Roku
    2013-01-12 18:29
    In the PKGBUILD you have to replace "autoreconf" by "autoreconf -fi".
    Anyway, thanks for your help and sorry for taking your time.
    Last edited by NAND (2013-01-28 16:15:09)

  • Basic Layout not rendering correctly.

    ''locking as a duplicate of https://support.mozilla.org/en-US/questions/1035123''
    Hello,
    I've been trying to debug a problem I was noticing on my production websites, so I dumbed it down to a quick codepen to show off the issue. http://codepen.io/anon/pen/GgoBNJ
    Basically, standard fonts (helvetica, arial, etc.) are not rendering correctly within a div. For some reason the text is pushing itself up ~2 pixels. Not to mention, fonts are looking very jagged within the browser for no apparent reason.
    I am setting up a basic div with hardly any styles and yet this produces two different renderings within FF and Chrome
    .box{
    font-family: Helvetica, Arial, Sans-serif;
    font-size: 14px;
    border: 2px solid #FF5500;
    display: inline-block;
    width: 100px;
    This is causing me all sorts of headaches with designers who are trying to make layouts pixel perfect as I have zero control over something like this. Any help would be greatly appreciated!
    Thanks in advance.

    You may have zoomed the page(s) by accident.
    Reset the page zoom on pages that cause problems.
    *<b>View > Zoom > Reset</b> (Ctrl/Command+0 (zero))
    *http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can right-click on a web page and select "Inspect Element" to open the Inspector (Firefox/Tools > Web Developer).
    You can check the font used for selected text in the Font tab in the right pane of the Inspector.
    *https://developer.mozilla.org/Tools/Page_Inspector
    You can do a font test to see if you can identify corrupted font(s).
    *http://browserspy.dk/fonts-flash.php?detail=1
    You can try different default fonts and temporarily disable website fonts to test the selected default font.
    *Tools > Options > Content : Fonts & Colors > Advanced
    *[ ] "Allow pages to choose their own fonts, instead of my selections above"

  • Non english fonts

    I have an iBook G4 running 10.4.8. For some reason, it will not print non-English fonts. As an example, I have New Peninim installed. Fontbook recognizes and verifies it. When I set that as the font in Textedit, it shows the text I type in but it does not show it in that font, which is Hebrew, but shows it in an English Font style. It does the same thing with most any other non-English font except for Cyrillic fonts, which it will show. Any ideas?

    See my reply to your later post
    http://discussions.apple.com/thread.jspa?threadID=745192&tstart=0
    chris

  • How should I organize and disable non-english fonts.

    I'm a graphic designer and I'm having trouble organizing all of these random hebrew/japanese/chinese fonts that I never use.
    I don't want to screw up my system, but I also don't want to scroll through 200 fonts every time I want to find one.
    Is there an easy way I can find all of the non-english fonts and disable them?
    Fontbook freezes and crashes all the time for me, so I've been using Suitcase Fusion free trial for a few days and disabled a bunch of fonts through it. Though, it prevents me from disabling anything considered a "System Font" which is fine, only having the necesccary non-english fonts is okay, I just don't want 75% of my font list in my adobe applications to be un-usable fonts.
    I guess my problem is that by default, some fonts are pre-disabled on OS X, and should I run into problems, I want a way to easily re-enable these fonts if I need to. Also, since I've disabled so many fonts, I dont' know what ones are enabled by default. How would I go about restoring all of my fonts?
    I think it'd be nice to be able to sort all of the fonts by what language they're in. But I don't know what language the font is because I don't speak those languages. Another problem is that you can't organize local fonts in Suitcase. I think using fontbook would be my best option for this, before switching back to Suitcase for regular use, but I still have the problem of restoring my already disabled fonts correctly, and figuring out which fonts are in what language. Could anyone help me out with this?

    PS Here is a rough list of fonts provided with OS X intended for use only with particular non-Latin scripts:
    Arabic :  al bayan, baghdad, damascus, decotype naskh, geeza pro, nadeem
    Hebrew: arial hebrew, corsiva hebrew, new peninim, raanana
    Thai: ayuthaya, krungthep, sathu, silom, thonburi
    Lao : lao
    Tibetan: kailasa, kokonor
    Korean: gungseo, headline, nanum, pcmyungjo, pilgi, applegothic, applemyungjo
    Chinese: biaukai, gb18030, hei, heiti, kai, lihei, lisong, stfangsong, stheiti, stkaiti, stsong, apple ligothic, baoli, kaiti, lantinghei, libian, songti, wawati, weibei, xingkai, yuanti, yuppi
    Japanese: hiragino
    Armenian: mshtakan
    Ethiopic: kefa
    Indic: devanagari, bangla, gurmukhi, gujarati, oriya, tamil, telugu, kannada, malayalam, sinhala,
    Myanmar : myanmar
    Cherokee : plantagenet cherokee
    UCAS : euphemia
    Khmer : khmer

  • Why is my .psd file not rendering correctly in ae

    Some layers of the .psd document are not rendered correctly. However they are imported.
    The strange thing is that when I first move from Photoshop to Illustrator, save it as an .ai file it is rendered properly (in Ae).
    I am kind of clueless as to what is causing this issue.
    Kind regards,
    Jelle

    Okay if more information is needed, i'll provide. However you may disregard my initial comment about illustrator. It flattens the photoshop layers so I do not have any flexibility in After Effects. In other words, my main question remains: why is my psd file not rendering correctly in ae?
    Further details:
    -photoshop cc and after effects cc.
    -macbook pro retina
    If still not clear enough, please tell me what details you are looking for furthermore

  • [SOLVED] KDE4.3 is not rendering correctly the images in the desktop

    I've posted a bug in KDE because the KDE images are not rendered correctly:
    https://bugs.kde.org/show_bug.cgi?id=202829
    You can see an image of my desktop at:
    https://bugs.kde.org/attachment.cgi?id=35921
    As someone suggests, and I also agree with him, it would be a driver problem. My graphic card is "ATI Radeon X1950 Pro" and I'm using the "xf86-video-ati 6.12.2-2" driver. I know that there are other possibilities according to this wiki:
    http://wiki.archlinux.org/index.php/ATI
    I already tested them with KDE4.2 and xf86-video-ati provided the best result for me.
    Someone with an ATI card has the same problem? Which driver would you suggest to me?
    Thank you
    Last edited by jjjaime (2009-08-06 19:04:12)

    Thank flamelab for your help.
    The xf86-video-ati-git:
    http://aur.archlinux.org/packages.php?ID=15374
    fixed all my problems. Probably you've heard about it Now, I don't have any rendering problem and I have enabled the Desktop effects. I tested it with and without the xorg.conf file. Both of them worked, but without the file I don't have my keyboard in Spanish.
    I read that it was possible the KMS support. I tested it by changing from graphical to text mode but it takes some time so I guess that it's not enabled. Is there any way to test KMS?
    Is it possible to upgrade the AUR driver to the official repository? Meanwhile, I will comment my problem in the KDE site.
    Best regards,
    Jaime

  • Hindi fonts not rendering in html pages

    Hindi fonts not rendering in when html pages are run except the mangal and devnagri font.
    Is that a bug or a problem which i am not able to tackle.
    Mozilla browser shows error in console that (font download failed or The character encoding of the HTML document was not declared. The document will render with garbled text in some browser configurations if the document contains characters from outside the US-ASCII range.
    downloadable font: download failed (font-family: "Kruti Dev 010" style:normal weight:normal stretch:normal src index:0): status=2147500037
    source: file:///D:/epub/filename/OEBPS/Fonts/k010.otf @ file:///D:/epub/filename/OEBPS/Styles/style.css).
    Please reply soon.
    Thanks.

    Download and install hindi font from [http://hindi-fonts.com Hindi Fonts] .

  • PDF not rendering correctly

    Hi
    Can anyone help? I am using an iMac and have had a pdf emailed to me. When I login on to the site and select the PDF to view, it is not rendering correctly.
    I am not a technical person but to me it appears to open as a series of code, letters, numbers and symbols.
    Any ideas how to rectify this?
    Is it Adobe related or can I update the settings for the browser? I am using Safari.
    Thanks

    what OS & Safari version ?
    Often, removing any 'pdf' plugins in
    /Library/Internet Plug-Ins/
    and
    ~/Library/Internet Plug-Ins/
    then restarting the browser will solve pdf display issues, although in this case, it sounds as if the site is telling Safari that these are text type files & it's attempting to display them accordingly.
    Disabling plug-ins via Safari - Preferences - Security should also eliminate pdf plug-ins as a cause.

  • Rollover text not rendering correctly in Safari 7.x

    Safari 7.x and my blog (NotNecessarilyPretty.com) are not getting along.
    Specifically, the rollover text in the post titles (see attached or visit site) is not rendering correctly. The right edge of the text does not change to the correct color. Have been in contact with Apple as well as the theme's developer, but have yet to be offered of a fix. 
    This blog displays correctly when accessed via Chrome or Firefox, and prior to Mavericks, Safari evidenced no problem.
    Thoughts on how to correct this?
    Thanks!

    The original screenshot didn't show here, so for anyone else reading, who may well know much more about CSS & Safari than I :
    changes to this - note the right edge
    But with word-spacing un-checked in Inspector...

  • RequestCenter emails not rendering correctly in Outlook 2007

    RequestCenter emails not rendering correctly in Outlook 2007
    I'm having an problem where the RequestCenter automated emails are losing most of their HTML formatting when viewed in Outlook 2007.  When I look at the same email in Outlook 2003, the HTML formatting is fine.  Here's a picture of the same email displayed in Outlook 2003 and 2007:
    When I view the source HTML of the email, I noticed that there are duplicate HTML, HEAD, and BODY tags that have been automatically added by RequestCenter.  Apparently these extra tags are ignored by Outlook 2003, but cause problems with Outlook 2007.
    This picture shows the HTML source in RequestCenter's HTML editor compared to the HTML source from within Outlook with the extra tags.
    I tried removing the HTML, HEAD, and BODY tags in the HTML editor, but the editor puts the tags back in when you save it.
    Does anyone know how to fix this?
    Thanks,
    Scott

    We've actually had the same problem and had opened a ticket with customer care - it's the editor that's in the version we have (or had, since we are going through the upgrade).  What we've had to do is embed xml tags in the body of the email too, and then the team that processes the email has a little application that will process the data in the tags and strip the HTML that the editor applies.  Not much help, I know. 
    I've heard a rumor that the issue is fixed in 2007 with the new text editor - I'

  • Fonts not showing correctly only when on my account page on app store

    fonts not showing correctly only when on my account page on app store

    Firstly, make sure that your device is not hidden (left hand pane). If it just reads device then toggle between SHOW and HIDE.
    Secondly, try all the other ports on your computer, even a number of times.
    Thirdly, if you have another computer try plugging your device into it without taking any action, give it a moment, remove it and try it back in your other computer again.
    Failing all that, see here - http://support.apple.com/kb/TS1538 for Windows and http://support.apple.com/kb/TS1591 for Macs
    And failing all that put the device into Recovery mode. See here and note the paragraph 'If you restore from a different computer.... ' down near the bottom of the page -
    http://www.apple.com/support/ipad/assistant/itunes/

Maybe you are looking for