Non-existant IObj error on transport

I'm getting error:
InfoObject ZBADIBAN is not available in active version
Message no. R7825
Diagnosis
The InfoObject named is defined in the InfoCube / InfoObject catalog, but is not actively available.
Procedure
Please stop the editing of the InfoCube / InfoObject catalog and first determine why the InfoObject is not available in an active version, using the InfoObject maintenance.
while trying to re-transport InfoArea & 2 Info Catalogs into QAS.
The strange thing is that this ZBADIBAN IObj does not exist in DEV nor in QAS systems... :/

Hi Tina, welcome to the forum.
The best place to start to diagnose V04 errors is to run the BT speedtest and cut and paste the results here. If it tells you to change your password to run more tests just ignore it and post the results you got up to that point.

Similar Messages

KM transport error: ALL paths that were specified refer to non-existent

I have a folder /root/company.
I am trying to transport this company folder to my QA system.
I created a KMC file. I followed the instructions in below link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm
IT throws an error during import. All paths that were specified refer to non-existent or read-only repositories.
Can anyone please suggest, what am I missing? Do I have to create any repositories on QA system. IF so, please suggest me how to do it?.
We are ussing EP 7.0 portal
Thanks,
Raj

As per my understanding you have created KMC file for folder "company" which is inside "root".
Can you confirm if company folder exist in QA environment?? if it dosenot exist then create repository by performing following steps:
1. Go to System Administration --> System Configuration --> Knowledge Management --> Content Management --> Repository Manager --> File system Repository OR CM Repository (as per your requirement)
2. You can find whether you have to create Repository inside File System Repository OR CM Repository by looking into your test or developement environment by going into the path mentioned in step 1. Copy all the properties of the Company repository from test or dev environment.
3. Now inside one of the repository(File System Repository OR CM Repository) you can create one repository with name Company.
4. To create Company repository you will find the option "NEW" inside the above mentioned path and on clicking on the same, fill all the properties (take help of the properties you have copied in step 2).
And now try to upload the KMC file.

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

DBMS_LOB.FILEOPEN(dir, fname) gives non-existent dir or file error

Hello!
I've been trying to load an image file into the oracle database using the DBMS_LOB loadfromfile procedure. In order to do this, I first have to open the appropriate file which I do using
temp_bfile := bfilename('temp_dir', in_filename);
where in_filename is a string having the appropriate filename. and 'temp_dir' is a directory object created as follows:
CREATE DIRECTORY temp_dir AS 'F:\';
Next when I do a
DBMS_LOB.FILEOPEN(temp_bfile, LOB_READONLY);
I get an exception ORA-22285:non-existent directory or file.
What am I doing wrong? Is the way I've created the directory object correct. I work on an NT machine.
Mona

Not sure if the UTL_FILE package is the same but if you don't set the "utl_file_dir" variable in the INIT.ORA file prior to calling the FOPEN procedure you will get a similiar error. There may be an equivalent parameter for the DBMS_LOB package.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Mona Marathe ([email protected]):
Hello!
I've been trying to load an image file into the oracle database using the DBMS_LOB loadfromfile procedure. In order to do this, I first have to open the appropriate file which I do using
temp_bfile := bfilename('temp_dir', in_filename);
where in_filename is a string having the appropriate filename. and 'temp_dir' is a directory object created as follows:
CREATE DIRECTORY temp_dir AS 'F:\';
Next when I do a
DBMS_LOB.FILEOPEN(temp_bfile, LOB_READONLY);
I get an exception ORA-22285:non-existent directory or file.
What am I doing wrong? Is the way I've created the directory object correct. I work on an NT machine.
Mona<HR></BLOCKQUOTE>
null

Error: "All paths that were specified refer to non-existent ..."

Hi,
On the import of the KM Content I have the next error: "All paths that were specified refer to non-existent or read-only repositories".
I used the following links:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm
https://forums.sdn.sap.com/thread.jspa?threadID=1347171
http://forums.sdn.sap.com/thread.jspa?threadID=1544261
Please could you help me?
Thanks in advance.

Hi,
Please refer the following thread
https://forums.sdn.sap.com/thread.jspa?threadID=1347171
http://forums.sdn.sap.com/thread.jspa?threadID=1544261
Regards
Priya

ACE# sh script code - Error: Called API is invalid or non-existant

What is this ??
ACE# dir disk0:
2846 Jun 14 2010 15:40:33 NORDICID_PROBE
ACE# sh script code NORDICID_PROBE
Error: Called API is invalid or non-existant
Hardware is ACE-4710-K9 and software A3(2.7)
The probe itself is functioning ok according to show probe detail.
However show script script_name probe_name -counters all remain at zero for some reason. This wasn't the case on the previously use ACE software.
To my recollection the command show script code has worked successfully before on the same ACE software. Not 100% sure though, but it definitely worked on the previous software we ran on the ACE.

Hi Timo,
You could be hitting CSCtu33866 (see
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu33866 for more details)
If you are really hitting this bug, a reboot should fix the issue.
I hope this helps
Daniel

NI Elvis throwing error 7, NI 488: Non existent board, NI Elvis traditional throwing error 2, NI 488: Write detects no Listeners when attempting to launch labview

I wrote a program on a laptop in our lab that used both the NI Elvis power supplies and DMM. On the laptops in the lab, which connected to NI Elvis through a board in the NI-PXIe device the program worked perfectly both as a vi and as an executable. The program needed to be put on some computers in another lab for student use with a different version of labview, and everything worked except for the variable power supplies. I activated debugging and it reported Error 7 at New File, NI 488: Non-Existent Board. After attempting to trouble shoot this and not finding any helpful results I attempted to rewrite the program on the computers directly, since I could only put the program on the computers as an executable since it was written in 8.6 and the computers only have 8.0 and 8.2. To begin I was going to launch labview from NI Elvis to use one of the example codes as a base for my program. When attempting to do this I got Error 2 with the possible causes being Labview memory full and NI 488: Write detected no listeners. My question is are the two errors related, and how can I fix these errors? All the NI Elvis software is 2.0, the original program was written in Labview 8.6, the computers have Labview 8.0 and 8.2 on them. The NI Elvis devices are connected directly through the computers, rather than through another device, I'm not sure if this might be causing some obscure hardware issue.

Hello Chris,
It looks like this error is associated with not having administrator privileges. Take a look at this other forum post for more information:
http://forums.ni.com/t5/Academic-Hardware-Products-NI/Error-2-when-starting-LabVIEW-from-ELVIS-Instr...
If you can log in as an administrator you should be able to avoid getting error 2 when you launch LabVIEW from NI Elvis. Alternatively, you can upgrade to NI-ELVIS 3.0, because the issue is fixed in that version of NI-ELVIS. You can find this by going to ni.com/support and searching for "NI-ELVIS 3.0"
Colden

CG02BD - Buffer Error, updating non existent record - Need your attention

Hi Gurus,
This is regarding transaction code CG02BD buffer error which I am getting while updating Identifier info.
CG02BD - Edit Specification
I am getting error "Error in Buffer: update of non existing record" for Num ID category only in case of Customer and Vendor.
Could any one guide me to correct/rectify this one please.
<< removed >>
Thanks !
Madan
Edited by: Rob Burbank on Sep 22, 2010 11:35 AM

Can you please let us know the solution for the same.? We are facing the similer issue for one of the user and getting the same error.

PO E-Mail Out Put Error ( E-mail address incorrect or non-existent )

Hi Gurus,
I'M getting the error " E-mail address incorrect or non-existent" when i process the out put type for email of PO.
I maintained all the settings which are mentioned below ,
Goto NACE .
u2022 Select EF and click on OUTPUT TYPES.
u2022 Then select Output Type NEU and click on processing routines .
u2022 In that you have to add a new entry - medium 5 .
u2022 Then you need to assign a program, form routine and form.
u2022 You can use the standard program i.e. SAPFM06P, FORM routine is always ENTRY_NEU and standard MEDRUCK.
u2022 Then in PARTNER FUNCTION you need to add a new entry : medium - 5 and function - VN .
u2022 For subject of the mail goto Mail Title and Texts. In title give PO No. &EKKO-EBELN& .
u2022 Under General data -> Replacement of text symbols give programm as SAPMM06E and Form Routine as TEXT_SYMBOL_REPLACE .
u2022 You need to maintain your email id in tcode SU01 and also the vendor's email id.
u2022 Now while creating a new purchase order , change the medium to External Send .
u2022 Then goto Communication Method and select CS01 . ALSO make sure that the Cover Page Text has value PO No. &EKKO-EBELN& .
u2022 Goto tcode ME9F .
u2022 Execute.
Still I'm getting the same error " E-mail address incorrect or non-existent". could any body help me in this issue?
Regards,
Sri.........

Hi Deepak
I have gone through the notes which u have mentioned, but it is not helping to my query,
I had maintained SMTP port in the tcode SCOT.Then I'm getting the message "MAIl request 000000000002 created" when I run tcode ME9F for email out put.But I'm not getting the out put in the email address which I specified in the vendor master record. I can see one error in the transaction code SCOT. should i run transaction SCOT manually every time ?
Regards,
Sri...........

Non-existent errors in Problems view

Hello,
Sometimes flash builder shows non-existent errors in Problems. "Project clean" helps, but errors appear after several compilations again.

The problem was in pure action script class that extented MXML component.
After deleting that code all problems were dissappeared.

More Lion issues - Throwing Console errors for non-existent application

Again, with the bad side of Lion.
I was receiving all kinds of console errors in Lion with TweetDeck and Adobe AIR apps so I de-installed these applications and removed them from the system. However, Apple's fantastic Lion Operating System still is complaining about them even though they are not to be found.
In the console I am getting sandbox errors on locations and files that are non-existent. Below is a snapshot of the error messages, and the directory referred to: /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.... and the others DON'T EVEN EXIST!!
How do I keep this from happening? Why does the OS go after this when it's been removed?????
8/20/11SaturdayAugust 5:30:14.113 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
8/20/11SaturdayAugust 5:31:11.000 PM    kernel    nstat_lookup_entry failed: 2
8/20/11SaturdayAugust 5:31:44.239 PM    com.apple.SecurityServer    Session 100071 created
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.254 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.F9107117265DB7542C1A806C8DB837742CE14C21.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/com.seesmic.desktop.client.D89F32799270693BEF34AAA36E9B26 32B59240FA.1/.fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ lck~PrivateEncryptedDatak, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:31:44.255 PM    com.apple.security.XPCKeychainSandboxCheck    Can't get sandbox fs extension for /Users/kkathman/Library/Application Support/Adobe/AIR/ELS/TweetDeckFast.FFF259DC0CE2657847BBB4AFF0E62062EFC56543.1/ .fl89CB8354, status=-1 errno=No such file or directory ext=(null)
8/20/11SaturdayAugust 5:32:01.234 PM    Preview    snapshot of document took: 0.00030899 secs, calling unblockUserInteraction
8/20/11SaturdayAugust 5:32:01.318 PM    Preview    writing of document took: 0.083616 secs, success = YES
8/20/11SaturdayAugust 5:32:42.333 PM    rpcsvchost    sandbox_init: com.apple.msrpc.netlogon.sb succeeded
8/20/11SaturdayAugust 5:32:42.483 PM    sandboxd    ([66316]) smbd(66316) deny job-creation
8/20/11SaturdayAugust 5:32:42.583 PM    rpcsvchost    sandbox_init: com.apple.msrpc.srvsvc.sb succeeded
8/20/11SaturdayAugust 5:32:42.609 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:32:53.587 PM    sandboxd    ([66320]) rpcsvchost(66320) deny mach-lookup com.apple.distributed_notifications@1v3
8/20/11SaturdayAugust 5:34:53.329 PM    smbd    anonymous connected to path /var/rpc/ncacn_np
8/20/11SaturdayAugust 5:39:32.429 PM    mdworker32    kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.

Don't know how you de-installed but you didn't fully uninstall them. If you did not have an uninstaller supplied with the applications, then here's what you need to consider in order to fully uninstall:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
Automaton
Hazel
CleanApp
Yank
SuperPop
Uninstaller
Spring Cleaning
Look for them at VersionTracker or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Shipment category not copied from deliveries because none exist

Dear Gurus,
Can u please let me know what this 2 errors means:
1) Shipment category not copied from deliveries because none exist
2) Shipping material not copied as means of transport not unique
The above two warning message are getting from Inbound IDOC. its strange, First time I have seen u201C SHIPMENT CATEGORYu201D
Appreciate your supportu2026thanks
Rgds,
Shafiq

Hi Eric, can you please tell me how you resolved the issue. I am having the same problem and i don't know whether the fact that I can't map back to the IDOC that created the SHIPMENT, if it related to this error message or not.

RHX5 showing non-existent style

We imported two Word docs, using the same style sheet both in
the doc and in RH. All the styles are fine in both docs, except for
one style. Doc A shows a good style "InstructionIndent", but in Doc
B, the RH style field shows that RH has seen the same style as
"INSTRUCTION". The css has been applied to all chapters. The style
looks fine in the original Word doc.
1) Does the all caps font of INSTRUCTIONS mean something
special in RH, such as a non-existent style?
2) Do I need to change all of these styles manually, or is
there an easier way?
Thank you,
Linda

> When I transport the same Directory config from XID
> to XIT due to an additional change I have made, I get
> the error about the business system:
>
> Business system XE_DEV_3RD_IMS_001 is not assigned a
> business system in group XE_ESAP_TST_001
>
Can you let me know if XE_ESAP_TST_001 is the Quality Objects Group?
If yes, then can you check if you have created the transport target for the Business System XE_DEV_3RD_IMS_001 ?
If you do not want this Business System to be a part of the New transport, i.e, you do not need this Business System in your transport, then my gut feel here is that one of your Config Scenarios still contines to use this Business System or,
You are trying to import a Old version of your TPZ file.
Regards
Bhavesh

Error when transported to prod 0VTYPE_TEXT

Hi exp,
I got the following error when transported to prod 0VTYPE_TEXT
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Message no. RSTRAN715
Diagnosis
The transformation 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (not executable).
This can be caused, for example, by a change made to the source object or target object of the transformation.
The transformation connects the source to the target .
Procedure
The transformation must be reactivated.
so i tried to activate the trasformation in dev and transported,
now i got the following error
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Message no. RSTRAN802
can advice
kris...

Hi Meera, shashank,ashish,
i have an inactive RSDS 0VTYPE_TEXT ECPCLNT118 -> IOBJ 0VTYPE in BI prod
data source 0VTYPE_TEXT is been activated in R/3 SS and replicated to BIP as well and its active
when i tried to delete Transformations and DTP, the trnsport req failed with errors throw the message
PSA /BIC/B0000649 does not exist in log.
i observe that even though request failed with errors, DTP still deleted but not transformations.
one thing i found,
I wont be able to find 0VTYPE_TEXT (Value Type for Reporting (Texts)) under the info object 0VTYPE.
is this error cause?
i did collected all objects and transported, still errors throwing the folling messages
No rule exists
Target RSDS 0VTYPE_TEXT ECPCLNT118 is not allowed
Transaction 0FZBH7S1AB8H7ZZZZWGAOBGWG2HCBX5T is inactive (cannot be executed)
Error saving Data Transfer Process DTP_D5R4V8ZJAVNAOZTO2Z9J1JTCI
thank you for advice,
krish...

Error in transport after refresh ,..

Hi Expert ,
We are facing issue in transport in recently refreshes system ..the logs says something like this OS /DB version
HP Unix/ oracle 10.
This is R3trans version 6.05 (release 46D - 09.04.09 - 12:39:00).
R3trans finished (0000).
/usr/sap/transI/buffer/SID for transport: SIDK944412: Permission denied
HALT 20111208012809
ERROR: /usr/sap/transI/buffer/SID(prod) : cant open
: Permission denied
ERROR: EXIT(16) -> process ID is: 13738
tp returncode summary:
TOOLS: Highest return code of single steps was: 16
ERRORS: Highest tp internal error was: 0212
tp finished with return code: 212
meaning:
could not access file as supposed (see SLOG for more details)
rm: /usr/sap/transI/bin/transporttext.tmp non-existent
Error 6 initializing SQL*Plus
Message file sp1<lang>.msb not found
SP2-0750: You may need to set ORACLE_HOME to your Oracle software directory
grep: can't open /usr/sap/transI/bin/transporttext.tmp
grep: can't open /usr/sap/transI/bin/transporttext.tmp
Please let me know if any one has idea.

Hello Yogesh,
Please make sure /usr/sap/trans has proper ownership and permissions. You can compare them with other systems in your landscape.
Thanks,
Siva Kumar

Non-existant IObj error on transport

Similar Messages

Maybe you are looking for