Non-existent uid show as members of group

I'm thinking this might be a manual process, but I'll pose the question anyway.
I have a GroupOfNames - cn=group, ou=mygroups, dc=mydomain, dc=com
This group has many uniqueMembers and is forever changing - additions, deletions happen every day.
My question is: When I delete a user account from the LDAP, there is really nothing within that record to indicate that the user is a member of a group. So, I could have potentially hundreds of non-existent users listed as members of a group, with no way other than a manual process to go in and clean things up.
Is this the dumbest question of all time? or do I have a valid concern?
TIA
Rick

http://docs.sun.com/app/docs/doc/820-2763/fsush
Your concern is quite valid and this plugin handles it for you. Play with it on a test instance and make sure the indexes are done correctly as it causes a lot of problems if misconfigured.

Similar Messages

  • Exchange 2007 when sending a calendar invite, a non-existent delegate shows up in an undeliverable message

    I had a test user that was removed. When it was removed, it was still listed as a delegate on someone's email. Now, whenever a Calendar invite is sent to the existing user, the sender receives an undeliverable message. The existing user does not receive
    notification of a calendar event, but the event does show up in the calendar.

    Hi,
    If the delegate user account or mailbox has been removed from domain or Exchange server, please also remove the delegate settings with this account.
    If a user is set as a delegate for a manager, the meeting request which is send to the Manager would be forwarded to the delegate automatically and ask for approving in the delegate side.
    Please do the following steps in the Manager’s Outlook client to remove the delegate settings for this non-existent delegate:
    1. Open the Manager’s Outlook.
    2. Click File > Account Settings > Delegate Access.
    3. In the Delegate list, click the non-existent delegate, click Remove.
    4. Click OK to save the settings.
    Then check whether the issue persists.
    Regards,
    Winnie Liang
    TechNet Community Support

  • ITunes displaying non-existing TV-Shows on iPhone

    Hi,
    when I connect my iPhone4 (5.0.1) to iTunes, it displays two old TV-Shows on my iPhone. But the TV-Shows don't show up in my iTunes library (I have no TV-Show at all in my library) and they don't show up on my iPhone when I open the Videos app (no TV-Show at all on my iPhone). But iTunes still displays them as grayed out items on my iPhone. I can delete them from there, but as soon as I sync my iPhone they reappear as grayed out items in the TV-Shows section of my iPhone in iTunes. I even tried to remove them with CopyTrans. It seemed to work. Disconnected the iPhone from my computer, reconnected it, reopend CopyTrans and the TV-Shows don't show up anymore. But as soon as I open iTunes, these two TV-Shows show up again... I tried everything to get rid of these two ghost items, but they reappear again and again. Btw. these were two TV-Shows I downloaded through the 12 days of christmas app one year ago.
    Best regards,
    Donato

    Select the iPod.
    At the bottom, you have options such as Songs, Playlists, Albums, etc.
    Select Videos.
    If Videos isn't available, select More and then select Videos.

  • What third party tools exist to show a user or groups permissions and access rights for an entire SharePoint 2010 site collection?

    Our admin crew has just inherited a 4 year old SharePoint site that was developed on SP 2007 and later migrated to SP 2010.  We are trying to determine which users and groups have access to the 150+ sub-sites of the site and at what permission levels.
    Research tells me SharePoint 2010 has no means to simply list out a user's permission levels over an entire site collection, but that it must be done at each sub-site, list & library that has permission inheritance broken to create a unique permissions
    object.
    Has anyone found a solution to this issue?  Without days of research at each sub-site, list & library, how would one more economically go about such an investigation of a user's permissions on an entire SharePoint 2010 site?

    Hello,
    There is no direct way to see user and group broken permission within a site collection. However you can write powershell script to get the permission. You can modify the below script based on your need and export result in CSV. You may also need to add
    code to iterate all subsites within site collection.
    http://social.technet.microsoft.com/wiki/contents/articles/14242.sharepoint-2010-export-all-unique-permissions-from-site-collection-using-powershell.aspx
    http://en.community.dell.com/techcenter/windows-management/b/weblog/archive/2012/09/25/sharepoint-security-reporting-using-powershell
    Codeplex tool is also available to check permission but it is not always fulfill business need. You may also look at this if it suits you.
    https://permissionsmanager.codeplex.com/ 
    Hope it could help
    Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • RHX5 showing non-existent style

    We imported two Word docs, using the same style sheet both in
    the doc and in RH. All the styles are fine in both docs, except for
    one style. Doc A shows a good style "InstructionIndent", but in Doc
    B, the RH style field shows that RH has seen the same style as
    "INSTRUCTION". The css has been applied to all chapters. The style
    looks fine in the original Word doc.
    1) Does the all caps font of INSTRUCTIONS mean something
    special in RH, such as a non-existent style?
    2) Do I need to change all of these styles manually, or is
    there an easier way?
    Thank you,
    Linda

    > When I transport the same Directory config from XID
    > to XIT due to an additional change I have made, I get
    > the error about the business system:
    >
    > Business system XE_DEV_3RD_IMS_001 is not assigned a
    > business system in group XE_ESAP_TST_001
    >
    Can you let me know if XE_ESAP_TST_001 is the Quality Objects Group?
    If yes, then can you check if you have created the transport target for the Business System XE_DEV_3RD_IMS_001 ?
    If you do not want this Business System to be a part of the New transport, i.e, you do not need this Business System in your transport, then my gut feel here is that one of your Config Scenarios still contines to use this Business System or,
    You are trying to import a Old version of your TPZ file.
    Regards
    Bhavesh

  • Only Shows 2 members in BBM Group of 22

    Hi There
    I've been added to a BBM group of 22 members, but I cannot see any other members but the person that added me (the creator) and myself.  It only shows 2 members are in my group.  I also only get the messages that the creator has posted in the group.  The creator can only see all 22 members.  
    I have deleted the group then asked one of the other members to add me, it still shows only two members being the person that added me and myself.
    Please help :/

    Ask that person to DELETE you from the Group.
    Reboot your BlackBerry... With the BlackBerry device POWERED ON, remove the battery for a minute, and then reinsert the battery to reboot.
    Now, ask that friend to give you a reinvite.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Drop log group of non existing thread

    How to drop an non-existing thread log group.
    My database doesn't have thread 3; this has been added during cloning from 3 node to 2 node RAC.
    alter database drop logfile group 10
    ERROR at line 1:
    ORA-01623: log 10 is current log for instance UNNAMED_INSTANCE_3 (thread 3) - cannot drop
    ORA-00312: online log 10 thread 3: '+DATA/devdb/onlinelog/group_10.560.811225745'
    ORA-00312: online log 10 thread 3: '+FLASHBACK/devdb/onlinelog/group_10.360.811225745'
    GROUP#    THREAD#     seq#    STATUS
    10                    3               1         ACTIVE             
    11                    3               0         UNUSED

    Hi,
    It seems that Group 10 of Thread 3 is still used as its status is current.
    Please try to do
    alter system switch logfile;
    alter system checkpoint;And see whats the status for thread 3 and also verify if really thread 3 is now required.
    And you can always disable this thread if now required.
    Thanks,
    Navneet

  • When trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

    when trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
    You will need a minimum of 10-12 GBs of free space to install Yosemite, however, that is a bare minimum and should be at least twice that amount.

  • When I send email to a group, it shows all members addresses even though that option is turned off in the preferences.

    When I send email to a group, it shows all members addresses even though that option is turned off in the preferences. This just started happening on all my devices. I have the latest update instaled.

    That doesn't work on Mavericks. Follow Tuttle's advice.

  • Non existing "yhoo, not Yahoo" account shows up in the icloud?

    Non existing "yhoo, not Yahoo" account shows up in the icloud in settings as "[email protected]", cannot delete it either, when i click the delete button, that yhoo id popups and asks for a password. Please help me, I need to do a fresh restore of this iPhone? Check email is not working. please help me.

    izzath77 wrote:
    that yahoo account is also expired,
    That is irrelevant as it just is the name of your AppleID.
    Have you tried logging onto https://appleid.apple.com/
    with the incorrect  @yhoo.com account ?
    You will likely need to contact AppleID support here -> http://www.apple.com/support/appleid/contact/

  • OEM discovery - shows non-existing DBs

    Hello All:
    When i try to discover a node/host , OEM discovers non-existing databases as partially configured. These databases have been deleted a while ago. How do we clear them? oratab doesn't have entries for these databases.
    Thanks
    S~

    There arent any refs in listner.ora of those deleted dbs. I changed the tns_admin from $ORACLE_HOME/network/admin to $ORACLE_BASE/admin/SID/tns_admin as i am using a wallet. This may have probably introduced the confusion.
    Thanks
    S~

  • Can we show the root qualification group in tx PPPM & Matchup

    We have a requirement to show the root qualification group in PPPM and once the match up is done to also show the root object and not the direct parent qualification group.
    Is it possible to add another column in tx PPPM or to modify the content in an existing column.
    E.G. In the qualification catalog tx OOQA it displays as follows
    QK    Degrees
    -QK    BSC's
        -           Qual1
        -           Qual2
    -QK    BA's
        -           Qual3
    If i check on PPPM or on the screen after i have done the Profile match-up It reads as follows
    Qualification Group    Qualfiication
    BSC's                           Qual1
    BSC's                           Qual2
    BA's                             Qual3
    Their requirement is that it should show as follows:
    Qualification Group    Qualfiication
    Degrees                         Qual1
    Degrees                         Qual2
    Degrees                         Qual3
    Please assist if possible.

    Hi,
    You can copy and change the standard screen of the relevant subprofile.
    First goto SPRO - Personnel Management - Personnel development - Functions - Define profile view - Subprofiles.
    There find the report and screen of the subprofile - qualifications.
    Then you need the help of an ABAPer to copy the existing screen along with the function group -RHPP as far as I remember - and make the changes accordingly.
    Then you need to map the new screen to this subprofile.
    Regards,
    Dilek
    Edited by: Dilek Ersoz Adak on Jun 9, 2010 2:35 PM

  • Users added to Profile Manager not showing up in everyone group

    So profile manager was working quite well until I made a change to the workgroup group.
    I removed the password policy from the workgroup group and added a new group for the password policy so we could essentially still manage non user assigned iOS devices.
    Now when I add a new user to the workgroup group on the server I have them login to the mydevices site so we can enroll the device and they can login but are immediately presented with:
    "You do not have permission to access the page you were looking for. Contact your system administrator."
    In troubleshooting the issue I noticed that new users being added are not showing up the in the everyone group which is preventing the users from having proper access. Prior to all this I could add a user and they would show up in everyone as intended.
    Any thoughts?

    I'm not sure if this is the same issue, but I have a user in Server.app that is not showing up in Users group. She is listed in her sub-group, but I cannot add devices to her account. When I click on the arrow next to her name in the sub-group, it takes me to the Users list to the top user.
    Any thoughts?

  • InDesign CS6: preflight & non-existent overset text in my document.

    Hi,
    I’m using InDesign CS6. The preflight lists overset errors. When I click on the page icon and go to where the overset txt is supposed to be…there is none.
    I deleted EVERYTHING in the entire document, then did a SAVE-AS a new name; restarted InDesign; opened the empty document...and it still says I have overset text. I’ve had this issue before with other documents and just ignored the errors after hours of trying to fix the non-existent overset text - but other people have to use my documents. Having errors is an issue with shared documents. I started a chat with an adobe tech support person, but they had no idea what the problem is. Is this a bug? More importantly, is there a fix?
    any help much appreciated.
    regards,
    m

    I have a document with a similar issue. I just opened it just to check. When I click on the overset and click somewhere else, I get an empty text frame. I guess that's what happens to you as well. I turned on Show Hidden Characters and noticed that somehow I had at the bottom of the page a paragraph sign (probably I hit enter at the end without noticing it). I just deleted it and now is fine. Turn on the Show Hidden Characters and see if something shows up at the end of your document.

  • Unregistering a non-existing db

    hi,
    found two entries for the same database in the catalog
    SQL> select dbid, dbinc_key, name from rc_database where name='PROD1';
    DBID DBINC_KEY NAME
    3817268314 45902 PROD1
    3844414535 431892 PROD1
    i have tried to unregister the non-existing dbid but only encountered this error:
    RMAN> run
    2> {
    3> SET DBID 3817268314;
    4> UNREGISTER DATABASE "PROD1" NOPROMPT;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-00558: error encountered while parsing input commands
    RMAN-01005: syntax error: found "identifier": expecting one of: "allocate, alter
    , backup, beginline, blockrecover, catalog, change, copy, crosscheck, configure,
    duplicate, debug, delete, execute, endinline, host, mount, open, plsql, recover
    , release, replicate, report, restore, resync, }, set, setlimit, sql, switch, st
    artup, shutdown, send, show, validate"
    RMAN-01008: the bad identifier was: UNREGISTER
    RMAN-01007: at line 4 column 1 file: standard input
    would it be safe to simply delete this entry from the rc_database table?
    thank you..

    1) Identify the database that you want to unregister. Run the following query from the recovery catalog using Server Manager or SQL*Plus (connected as the RMAN user):
    SQL> select * from rc_database;
        DB_KEY  DBINC_KEY       DBID NAME     RESETLOGS_CHANGE# RESETLOGS
             1          2 2498101982 TARGDB                   1 15-JAN-04
           105        106 2457750772 OIDDB                    1 14-DEC-03
           128        129 2351019032 OMSDB                    1 15-JAN-04
           301        302 2498937635 TARGDB              140831 25-JAN-042) Remove the backupsets that belong to the database that you want to unregister.
    Find the backupsets of the database that you want to unregister.
    list backupset of database;3) if possible, remove the backupsets that belongs only to the database you want to unregister.
    RMAN> allocate channel for delete type 'sbt_tape';4) Unregister the database by executing the following procedure from the recovery catalog:
    execute dbms_rcvcat.unregisterdatabase(db_key, db_id)
    SQL> execute dbms_rcvcat.unregisterdatabase(1, 2498101982)
    PL/SQL procedure successfully completed.
    SQL> execute dbms_rcvcat.unregisterdatabase(105, 2457750772)
    PL/SQL procedure successfully completed.
    SQL> execute dbms_rcvcat.unregisterdatabase(128, 2351019032)
    PL/SQL procedure successfully completed.
    SQL> execute dbms_rcvcat.unregisterdatabase(301, 2498937635)
    PL/SQL procedure successfully completed.Hope this will help...

Maybe you are looking for