Non-Fatal Run-time Error "%%s"

This was shown yesterday by an non-debug program written with CVI 9.01 and run-time 9.1 (the current "428" build) on the target.
I was trying to fix "-12: Out of memory" popups (maybe a race condition inside ProcessSystemEvents/GetUserEvent?) and now this.
Any idea what this is?
/* Nothing past this point should fail if the code is working as intended */

A couple updates:
From all indications, this dialog should only be shown if your binary (exe) is built in release mode. If you build in debug mode, you should be able to see the error message that is trying to display. Also, if our preliminary investigation is correct, the error should be in your release mode exe, and not any loaded dlls.
From all indications, this dialog should only be shown if your binary (exe) is built in release mode and loads dlls that are build in debug mode. If you build your dependencies in release mode, no dialog should be displayed at all (because this is a non-fatal error).
Are you able to verify these statements?
Thanks -
NickB
National Instruments

Similar Messages

How to display "Non-Fatal Run-Time Error In Function Panel" dialog?

I'm learning how to develop an IVI-C specific driver using LabWindows/CVI. When I run my function from its function panel and it returns an error, I would like to display a dialog with both the error code and error message (as opposed to simply returning an error code on the function panel). This would save the user from having to call Prefix_error_message() to translate the error code to its error message. NI-DCPower driver is a good example of this behavior (see attached error dialog). How do I show the "Non-Fatal Run-Time Error In Function Panel" dialog? Any help is greatly appreciated. Thanks!
Attachments:
ErrorDialog.png ‏8 KB

Hi Shawn,
Thank you for replying to my post. The checkErr is just an error handling macro defined in ivi.h to goto Error: tag when the function returns a non-zero value. I have been using the checkErr macro (as well as viCheckErr and other macros) in my driver.
Using the same hp34401a specific driver as an example, please allow me to explain my question in more details:
Let's take the hp34401a_close function as an example. It is a simple function with only a few lines of code:
When the hp34401a_close function is run from its front panel using an invalid session handle (e.g. "8" in this screen capture):
You will get three "Non-Fatal Run-Time Error" popup dialogs, one from each of the IVI library functions that it calls: Ivi_LockSession, Ivi_UnlockSession, and Ivi_Dispose. However, there is no "Non-Fatal Run-Time Error" popup dialog from the hp34401a_close itself.
My IVI-C specific driver is behaving identical to the hp34401a specific driver.
In comparison, if run niDCPower_close function from its front panel using an invalid session handle (using the same "8" in this screen capture):
You will only get one "Non-Fatal Run-Time Error In Function Panel" from the niDCPower_close function itself:
I think the behavior of niDCPower driver is much better than the hp34401a driver. It replaces the three "Non-Fatal Run-Time Error" popup dialogs from the IVI library with a single "Non-Fatal Run-Time Error In Function Panel" popup dialog from the driver function itself. I would like to do the same thing with my driver but have not figured out how to display a "Non-Fatal Run-Time Error In Function Panel" dialog. Thanks in advance for your help!

Newbie question NON-FATAL RUN-TIME ERROR IN TUTORIAL (PlotY)

I'm a first time user, following the tutorial and when when I click on Acquire I get the following error "NON-FATAL RUN-TIME ERROR:   "sample1.c", line 85, col 13, thread id 0x00000D54:   Library function error (return value == -10 [0xfffffff6]). The control is not the type expected by the function"
Code is as follows (line 85 is PlotY......:
    case EVENT_COMMIT:
       srand (time(NULL));
       amp = rand ()/32767.0;
       SinePattern (100, amp, 180.0, 2.0, sine);
        PlotY (panelHandle, PANEL_Waveform, sine, 100, VAL_DOUBLE, VAL_THIN_LINE, VAL_EMPTY_SQUARE, VAL_SOLID, 1, VAL_RED);
        break;
Its not obvious why it crashes on this line, any help would be appreciated.
Thanks
Jeff

Happy to hear that you have solved your problem.
Just to be clear, there is no problem in using lowercase letters for control ID, but since the usual CVI behaviour is to use uppercase letters I was wondering if you created the control by yourself and if it could be a wrong one.
CVI does not really address controls by name: if you see in the include file associated to the UIR you'll see that PANEL_CONTROL is really a macro with an associated value, which is the one the program really uses (see my first post to understand how PlotY operates; the same happens for all functions that operate on control like Get/SetCtrlVal or GetSetCtrlAttribute for example).
Neither CVI operates any cross check between the panel handle and the control you are addressing: that's why I pointed you to the panel handle value, to be sure that you are not operating on a control using the handle of a different panel, a situation that may happen if you are using more than one panel at a time.
These are the reasons that may rise an 'incorrect control type' error.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Fatal Run Time Error - unknown source position thread id

Hi All,
I am using LabWindows CVI 2013 in order to display data from my controller.
I have defined some functions to activate the communication with the controller and read data from it.
The communication activation with the controller is being done inside the Main block before loading the UI panels.
I created a command button that activates the data reading function (Get Register) from the controller.
When calling the reading function I received a Fatal Run Time Error. Attached please find.
When I moved the reading function to the main block before loading the UI, the program didn't crush.
What is the cause for that?
Thanks for your support.
Haim
Attachments:
CVI.png ‏168 KB

Hi Haim,
Could you explain what you mean by moving the function to the main block? Does that mean instead of having a callback, you added the four lines in that callback (according to the attached image) to the main function? When you do this, does the code execute correctly?
And can you tell me what DLL package you are using that contains the Jet32Functions.GetRegister function?
The error is very generic, so it is hard to say what is causing it without seeing the entirety of the code, but it appears that there is a conflict in the thread control. Does the error occur only when you activate the callback by clicking the command button? Which lines are executed in the callback before the error occurs?
It would be helpful if you could attach your source file or at least a screenshot of the working code so I can see the entire main function.
Steven

INI instrument driver and fatal run time errors

Hey everyone, I'm experimenting with the INI instrument driver and running into a fatal run time error. Here's what I know so far:
The runtime error only happens during the very first Ini_Putxxx
It only happens if the target INI file does not yet exist. After the file is created with a Ini_WriteToFile, then the program will proceed with all my Put functions without any errors.
Ideas?
Solved!
Go to Solution.

Are you sure about that? I just tried calling these functions in the Interactive Execution window without errors (the destination file wasn't there before the call and has been created without errors):
#include "inifile.h"
static int error = 0;
static IniText T = 0;
T = Ini_New (0);
Ini_PutString (T, "General", "Item 1", "Test string");
Ini_PutInt (T, "General", "Item 2", 123);
Ini_PutDouble (T, "General", "Item 3", Pi ());
error = Ini_WriteToFile (T, "C:\\test.ini");
Ini_Dispose (T);
Ini_PutXX functions do not make any disk access, they work entirely in memory; the only functions where the instrument accesses the disk are Ini_WriteToFile and Ini_ReadFromFile. Which error are you receiving? Can you post a sample code that exhibits the error?
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Fatal run time error: unknown source position

I am getting a fatal run-time error when using CVI 8.0.1. I get the error when any program I write is exiting. Here's an example source:
#include <ansi_c.h>
int main(void)
    char buf[512];
    printf("press enter to exit\n");
    gets(buf);
    return 0;
after I press enter to exit, the program hangs for a few seconds and then I get the error. This only started happening after I upgraded to CVI 8.0.1. I have tried uninstalling / reinstalling / going back to earlier versions and I always have the problem now.

It sounds like something went wrong with the initial install or possibly there was problems with removing previous versions. Since uninstalling and reinstalling did not fix this, I would suggest you to use a utility called MSI Blast. This will show all installations that are on your machine and allow you to remove these installations. This is a last resort program and should never be used to replace Add/Remove Programs, but since something sounds as if it is corrupt, I feel it is best to use this. Here is the link.
ftp://ftp.ni.com/outgoing/msiblast.zip
You will need to remove and reinstall all NI components to assure that we remove the corrupt file. It is definitely something local to your machine as I was not able to replicate the problem with your provided code. Please run this utility and let me know once you have pick this up off of the ftp, as we do not leave this utility up for long.
Message Edited by Brandon V on 10-10-2006 02:22 PM
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

FATAL RUN-TIME ERROR: The program has caused a 'General Protection' fault at 0x6846680A.

Dear all,
I have some troubles with LabWindows CVI. Sometimes (maybe 2 or 3 times by week) my application crash with General protection error in cvirte adress. This crash never happens in the same part of the code is always happens in random way. The problem is that in debug mode we don't have any information about where the problem occurs in cvirte. This bugs can happens with differents application from very simple application to very complex applications.
Do you have some ideas that how can I solve these problems?
Thanks

Hello J. Romero!
Thank you for the crash information you provided!
Hover you managed to collaborate with NI France more in order to determine the cause of this crash?
Unfortunately, the information you provided is still not sufficient for us to determine the exact cause and circumstance of this crash:
The provided event logs only contain relative addresses of the locations. An absolute crash address can better suggest the exact location. Please provide a screenshot of the crash window dialog, which contains the exact absolute address of this crash.
In your original post, you mentioned that you can reproduce the crash with a "very simple application". Is it possible for you to send us the application on our incoming FTP server, so that we can build and run the program on our side?
Do you have a suspicion for any particular libraries, components or UI controls that you are using, which reproduce the crash. E.g. "whenever I perform this action in a Numeric Control, the crash occurs...". This will further help us to narrow down on the problem!
If #2 is not possible, one other solution would be to send us a crash dump of the application. Please follow the steps in this Developer Community post, in order to generate and send us a crash dump: https://decibel.ni.com/content/docs/DOC-1496
Best regards!
- Johannes

Why do I get a "Fatal Run Time Error: Out of Memory" after an hour while using RT on a PXI 8186?

When I run this code with high speed DAQ+proccessing+control for over an hour in RT on an 8186, I get the above error. There were some arrays being built really quickly, etc. So I replaced these array initializations followed with "replace arrays subset" blocks. Still ,No luck.
I'd really appreciate it if anyone could help me. the code can be posted here as well if reqd.
I'm Running LV RT 7.1, and the target is a PXI-8186.
Also, is there any way of allocating extra virtual memory in RT?

Let me second everything that Aaron mentioned.
Please post some code that demostrates your trouble and we will take a look.
Gnerally I have to say that RT applications are rather demanding in the area of memory.
I find myself avoiding data types that can vary in size, like strings. These can demand increases in buffer allocations such that the buffer previously allocated are insufficient, are tossed on the heap and another larger block is allocated. Too much of this happening can kill you in RT. Building strings is bad.
Building arrays is just not allowed.
LV2 globals (when properly coded) are useful in keeping memory useage static or diminishing. This dovetails with Aarons circular buffer.
Review all code that is executed repeatedly using
Tools >>> Advanced >>> Show Buffer Allocations
In a nutshell, one or more of thes is killing you.
Post your code so we can make specific suggestions.
Trying to help,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Run-time error handling without popup

I'm searching for a way to make a CVI executable more robust by performing an automatic routine if any run-time error occurs. Basically I don't like the fact that a popup is displayed and the program is halted in the event of a fatal run-time error.  I cannot prevent a fatal run-time error from ever occurring so I was hoping there was a way to handle it automattically when CVI detects it. So far though, the only thing that I've found is the CVI run-time error popup which suspends the program until user input or in release mode, a Windows popup that suspends the program in a similar manner with more cryptic OS level exception info. I'm using Windows XP and CVI 2009, thanks.

Ok, well, the source of the fatal run-time error seems to be within a function call to imaqSnap within the NI Vision library. imaqSnap() is a function that just grabs 1 frame of video. We're using NI Vision 8.5 with a PCI-1422 Imaq card and whenever there is no signal present at the input of the card, we get the following error:
FATAL RUN-TIME ERROR:   "Imaq_support.c", line 187, col 18, thread id 0x000004F8:   Function : (errorCode = -1074397150 [0xbff60022]). A timeout error occurred while waiting for the specified event. If waiting for an image, verify that all video data is acquired within the timeout period. If waiting for a signal, verify that the signal assertion occurs within the timeout period.
Line 187 is the line with the call to imaqSnap shown below:
                                            /* Initialize the Image Capture system */
                                            /* Open an interface and a session */
      ApplErrChk(imgInterfaceOpen ("img0", &Iid));
      ApplErrChk(imgSessionOpen (Iid, &Sid));
                                            /* set aquire mode */
    /* Snap a picture : ImaqBuffer is NULL, memory will be allocated by NI-IMAQ */
      AcqImage = NULL;
      AcqImage = imaqSnap (Sid, NULL, IMAQ_NO_RECT);
      if (AcqImage == NULL) {
        ErrNull = TRUE;
        iErrCode = imaqGetLastError();
        if (iErrCode != ERR_SUCCESS) goto tst_exit;
It seems to me that this should not be a fatal run-time error, it should instead throw a non-fatal timeout error and allow our calling code to handle the null reference to the image. Since it's a fatal error though, it doesn't allow me to ignore the run-time error and handle it gracefully. The Sid and Iid references look fine when it throws the error so I'm unable to detect the problem before the function call. Any thoughts on how to fix this issue?

Fatal Run-Time - Unknown Fault - on any CVI program close

I have been trying to track down a few what seem like phantom Fatal Run Time Errors on my program closes.
I am running LabWindows/CVI 2010 Full 10.0.1 (419)
I originally posted here -> http://forums.ni.com/t5/LabWindows-CVI/EasyTab-ConvertFromCanvas-memory-leak/m-p/3084769#M69465
As I thought this was related to tabs, where my resource tracker shows 'unclosed' resources.
Now I am opening a different program and have found that even though I put my return 0; at the top of my main loop, I still get a fatal run time error.
The error is exactly:
FATAL RUN-TIMe ERROR
Unknown source position, thread id 0x00001BB4
The program has caused a 'Unknown' fault at 0x748A4F11
This occurs every time I run my program in the CVI IDE.
There are no allocated resources in my resources window.
Searching for either address in my map file brings no results.
Thanks,
Nick

Hi ngay528,
I have attached a link below to one of our discussion forums that walks through using the Resource Tracking feature of LabWindows/CVI. Again, sometimes this particular error is caused by leaving resources open at the end of an application, so this feature can help us identify those resources if that is the case. Please follow the steps listed in the solution of the thread (message number 4, marked in green).
FATAL RUN-TIME ERROR: Unknown source position, thread id 0x00000EB4: The program has caused a 'General Protection' fault at 0x00459B9D:
http://forums.ni.com/t5/LabWindows-CVI/FATAL-RUN-TIME-ERROR-Unknown-source-position-thread-id/m-p/16...
Thomas N.
Applications Engineer
National Instruments

Run time error in FBZ5

Hi,
while runing t,code FBZ5 , i am getting this run time error.
Runtime Errors         CALL_FUNCTION_NOT_FOUND
Except.                CX_SY_DYN_CALL_ILLEGAL_FUNC
Date and Time          30.05.2009 13:12:34
Short text
     Function module "OTF_LIST" not found.
What happened?
     The function module "OTF_LIST" is called,
     but cannot be found in the library.
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
      not caught in
     procedure "OTF_SEND_SPOOL" "(FORM)", nor was it propagated by a RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     The program "SAPLSTXC" contains the CALL FUNCTION statement.
     The name of the function module to be called is "OTF_LIST".
     No function module exists with the name "OTF_LIST".
All function modules are listed in the Function Library (SE37).
Possible reasons:
a) Wrong name specified. Pay particular attention to
    upper/lower case and underscores ("_").
    or
b) Transport error
c) In the case of an enqueue/dequeue module,
    the lock object may not have been activated
    (ABAP/4 Dictionary).
Line SourceCde
241             unknown_font = 2
242             others       = 3.
243   if sy-subrc <> 0.
244     perform internal using 'OTF_SOFT_FONT_GET' sy-subrc.
245   endif.
246
247 * insert in otf table before(!) font call, i. e. append
248   check not otf[] is initial.
249   append lines of l_sfont to otf[].
250
251 endform.
252
253
254 form otf_send_spool tables otfdata structure itcoo
255                     using param   structure itcpp.
256 data: l_parlen type i,
257       l_dummy(1) type c,
258       l_mult     type i,
259       l_actmult type i,
260       l_cp       type tcp00-cpcodepage.
261
262 * right-to-left conversion
263   if itcpp-tdrtl = true.                                            "RTL
264     if spool_external_print <> true.                                "RTL
265       perform otf_rtl_layout tables otf.                            "RTL
266     endif.                                                          "RTL
267   endif.                                                            "RTL
268 * use old 2.0 ABAP driver or spooler c-routines
269   if param-tdotfcall <> space.
270     check param-tddest <> c_dest_null.
>>>>>     call function param-tdotfcall
272          tables otf = otfdata
273          exceptions others = 1.
274     if sy-subrc ne 0.
275       perform fatal.
276       call function 'SAPSCRIPT_MESSAGE'
277            exporting typ = 'A'.
278     endif.
279   else.
280     check param-tddest <> c_dest_null.
281
282     describe field l_dummy length l_mult in byte mode.
283     l_actmult = l_mult.
284
285     loop at otfdata.
286        case otfdata-tdprintcom.
287          when pc_id_string.
288            if c_unicode = false.
289              l_parlen = 7 + otfdata-tdprintpar+5(2).
290            else.
Regards,
balu

Hi,
Kindly check in debug wht the non existent FM 'OTF_LIST' is getting called?
Probably this seems to be a dynamic call to some FM and the FM name is not getting generated properly.
Regards,
Ankur Parab

Run time Error while Creating Expense request

Dear Friends ,
In   E-Payment ( Expense Claim )   creation , While clicking on Enter Receipts application is going to run time error for only one user.
Run time Error Info :
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Exception              CX_SY_REF_IS_INITIAL
Short text
     Access via 'NULL' object reference not possible.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_WDR_P13N_UTILITIES=========CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
    An exception occurred that is explained in detail below.
   The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
    caught in
   procedure "PRESET" "(METHOD)", nor was it propagated by a RAISING clause.
   Since the caller of the procedure could not have anticipated that the
   exception would occur, the current program is terminated.
   The reason for the exception is:
   You attempted to use a 'NULL' object reference (points to 'nothing')
   access a component (variable: "LR_CONTEXT_ELEMENT").
   An object reference must point to an object (an instance of a class)
   before it can be used to access components.
   Either the reference was never set or it was set to 'NULL' using the
   CLEAR statement.
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
   If the error occures in a non-modified SAP program, you may be able to
   find an interim solution in an SAP Note.
   If you have access to SAP Notes, carry out a search with the following
   keywords:
   "OBJECTS_OBJREF_NOT_ASSIGNED" "CX_SY_REF_IS_INITIAL"
   "CL_WDR_P13N_UTILITIES=========CP" or "CL_WDR_P13N_UTILITIES=========CM002"
   "PRESET"
Information on where terminated
    Termination occurred in the ABAP program "CL_WDR_P13N_UTILITIES=========CP" -
     in "PRESET".
    The main program was "SAPMHTTP ".
    In the source code you have the termination point in line 60
    of the (Include) program "CL_WDR_P13N_UTILITIES=========CM002".
    The termination is caused because exception "CX_SY_REF_IS_INITIAL" occurred in
    procedure "PRESET" "(METHOD)", but it was neither handled locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "CL_WDR_P13N_UTILITIES=========CP "; its source
     code begins in line
    1 of the (Include program "CL_WDR_P13N_UTILITIES=========CM002 ".
Regards,
Suresh .

Hi Agrawal
As you are getting run-time error after entering the sold to party and material and the error is in SAPLV61Z ,
close the session for sometime and open again and then create sales order and then enter sold to party and material and then check wheather you are getting or not. If you are still facing the problem then take the help of the ABAP & BASIS consultant's.
Regards
Srinath

While doing SO, im getting run time error - reg;

Hi,
While doing sales order and whenever im doing save its getting runtime error.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
Short dump has not been completely stored (too big)
Short text
    The current application triggered a termination with a short dump.
What happened?
    The current application program detected a situation which really
    should not occur. Therefore, a termination with a short dump was
    triggered on purpose by the key word MESSAGE (type X).
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    Short text of error message:
    Maintain the current CRM release (table CRMPAROLTP)
    Long text of error message:
     Diagnosis
         Various transfer errors occur when transferring SAP sales orders to
         CRM or there is no status update or the status update has errors
         when transferring from CRM to the SAP system. This is caused by an
         incorrect entry for the CRM release in the SAP table CRMPAROLTP, or
         no entry is maintained at all.
     System Response
         To avoid data inconsistencies, this message causes a short dump.
     Procedure
         Maintain table CRMPAROLTP in your SAP system as is described in SAP
         Note 691710 and then repeat the process again.
     Procedure for System Administration
    Technical information about the message:
    Message class....... "V3"
    Number.............. 302
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
hort dump has not been completely stored (too big)
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "SAPMV45A" or "MV45AF0B_BAPIDATEN_ERMITTELN"
    "BAPIDATEN_ERMITTELN"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
System environment
    SAP-Release 700
    Application server... "personal"
    Network address...... "192.168.2.11"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "4x Intel 80686"
    Character length.... 16 Bits
    Pointer length....... 32 Bits
    Work process number.. 1
    Shortdump setting.... "full"
    Database server... "PERSONAL"
    Database type..... "ORACLE"
    Database name..... "GCU"
    Database user ID.. "SAPSR3"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Aug 29 2006 00:18:21"
    create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
    Database version. "OCI_10201_SHARE (10.2.0.1.0) "
    Patch level. 75
    Patch text.. " "
Runtime Errors         MESSAGE_TYPE_X
Date and Time          14.12.2011 10:55:26
hort dump has not been completely stored (too big)
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
    Memory consumption
    Roll.... 8176
    EM...... 30311496
    Heap.... 0
    Page.... 139264
    MM Used. 14538320
    MM Free. 91952
User and Transaction
    Client.............. 100
    User................ "INFO_SD"
    Language key........ "E"
    Transaction......... "VA01 "
    Program............. "SAPMV45A"
    Screen.............. "SAPMV45A 4001"
    Screen line......... 65
Information on where terminated
    Termination occurred in the ABAP program "SAPMV45A" - in "BAPIDATEN_ERMITTELN".
    The main program was "SAPMV45A ".
    In the source code you have the termination point in line 338
    of the (Include) program "MV45AF0B_BAPIDATEN_ERMITTELN".
Edited by: kiran35086 on Dec 14, 2011 6:30 AM

Dear kiran,
This might be many reasons.If you have not done configuration properly system will take you to dump(Run time error).
Try read the diagnosis possibly you may understand the problem.
If not You coordinate with your technical team.
Thanks&Regards
Raghu.k

Run Time Error while Transferring data to Application server

Hello Abaper's,
I have generated a XML data using the FM : " SAP_CONVERT_TO_XML_FORMAT ".
While transferring the data to a File on Application Server using the statement
DATA : wa_xmltab TYPE truxs_xml_line,
             it_xmltab TYPE truxs_xml_table.
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc EQ 0.
LOOP AT it_xmltab INTO wa_xmltab.
    TRANSFER wa_xmltab TO FNAME.    <<<<<<<<<<<<<< Getting Error here
ENDLOOP.
ELSE.
MESSAGE e004(zmsg5) WITH 'File FNAME not opened'.
ENDIF.
CLOSE DATASET FNAME.
The Run Time Error i am Facing is
Short text
    The current statement is only defined for character-type data objects.
Error analysis
    For the statement
       "TRANSFER f TO ..."
    only character-type data objects are supported at the argument position
    "f".
    In this case. the operand "f" has the non-character-type "TRUXS_XML_LINE". The
    current program is a Unicode program. In the Unicode context, the type
    'X' or structures containing not only character-type components are
    regarded as non-character-type.
Regards
jv

Hello Volker Binder ,
Thank you . it's now transferring the data to Application sercver. I forgot to try using Binay mode,
Thers is one more problem. There are 10 Records in that internal table that is being converted to XML format,
but the XML data is showing only first 4 records.... the XML data format for the remaining data is not seen.
Actual No. of Records in Internal table :
matnr            matkl          meins
0-BUY1               012         PC
0-BUY2               012         PC
1                                EA
2                    012         L
3                    01          EA
12                               EA
23                   001         ST
24                   015`        EA
28                   010         EA
29                   015`        AU
XML Format for the above 10 fields is :
<?xml version="1.0"?><TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY1</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">PC
</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">0-BUY2</MATNR><MATKL Datatype="C" Length="18">012</MATKL><MEINS Datatype="C" Length="6">
PC </MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000001</MATNR><MEINS Datatype="C" Length="6">EA</MEINS>
</TY_MARA><TY_MARA><MATNR Datatype="C" Length="36">000000000000000002</MATNR
This 4th record data in XML is also incomplete..
The above XML format is generated only for 4 records out of 10 Records.
Please let me know , how can i increase the Size / Memory of the Application server file to accomodate for the reamining Records
Regards
Jv

ABAP run time error

Dear ALL,
When we are creating sales order after entering sold-to-party, Material & Quantity when we press ENTER key That time
we are getting following run time error
Hoe to resolve this?
Runtime Errors         SAPSQL_INVALID_FIELDNAME
Except.                CX_SY_DYNAMIC_OSQL_SEMANTICS
Date and Time          15.01.2009 16:04:19
Short dump has not been completely stored (too big)
Short text
A dynamically specified column name is unknown.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLV61Z" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
    administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_DYNAMIC_OSQL_SEMANTICS', was
     not caught in
procedure "SEL_KONDTAB" "(FORM)", nor was it propagated by a RAISING clause.
    Since the caller of the procedure could not have anticipated that the
    exception would occur, the current program is terminated.
    The reason for the exception is:
    An Open SQL clause was specified dynamically. The contained field name
    "ALAND" does not exist in any of the database tables from the FROM clause.
How to correct the error
Check the field name in the SELECT clause.
If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
"SAPSQL_INVALID_FIELDNAME" "CX_SY_DYNAMIC_OSQL_SEMANTICS"
    "SAPLV61Z" or "LV61ZU01"
    "SEL_KONDTAB"
If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
    (Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
The exception must either be prevented, caught within proedure
    "SEL_KONDTAB" "(FORM)", or its possible occurrence must be declared in the
    RAISING clause of the procedure.
    To prevent the exception, note the following:
System environment
SAP-Release 700
Application server... "slgsap-prd"
    Network address...... "10.140.1.11"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
Database server... "SLGSAP-PRD"
    Database type..... "MSSQL"
    Database name..... "PRD"
    Database user ID.. "prd"
Terminal................. "SD0123l"
Char.set.... "C"
SAP kernel....... 700
    created (date)... "May 6 2008 00:13:21"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "SQL_Server_8.00 "
Patch level. 159
Patch text.. " "
Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
    SAP database version. 700
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
     NT 6.0"
Memory consumption
Roll.... 16192
EM...... 20949200
Heap.... 0
Page.... 196608
MM Used. 15928048
MM Free. 828016
User and Transaction
Client.............. 900
    User................ "ADMIN"
    Language key........ "E"
    Transaction......... "VA01 "
    Transactions ID..... "03F0E2DD6B35F16CBBFF002219897F24"
Program............. "SAPLV61Z"
    Screen.............. "SAPMV45A 4900"
    Screen line......... 930
Information on where terminated
    Termination occurred in the ABAP program "SAPLV61Z" - in "SEL_KONDTAB".
    The main program was "SAPMV45A ".
In the source code you have the termination point in line 672
    of the (Include) program "LV61ZU01".
    The termination is caused because exception "CX_SY_DYNAMIC_OSQL_SEMANTICS"
     occurred in
procedure "SEL_KONDTAB" "(FORM)", but it was neither handled locally nor
     declared
in the RAISING clause of its signature.
The procedure is in program "SAPLV61Z "; its source code begins in line
    260 of the (Include program "LV61ZU01 ".
Source Code Extract
Line SourceCde
642     if se_prestep              = yes or
643        se_read_only_one_record = yes.
644       if t681-ksdat is initial.
645         if se_read_all_prestep is initial.
646           select * from (t681-kotab) appending table <cond_tab>
647                  up to 1 rows
648                  where kappl = se_kappl
649                  and   kschl = se_kschl
650                  and   (coding_tab).
651           h_subrc = sy-subrc.
652         else.
653           select * from (t681-kotab) appending table <cond_tab>
654                  where kappl = se_kappl
655                  and   kschl = se_kschl
656                  and   (coding_tab).
657         endif.
658
659 * it is enough to find one record in prestep
660 * (care must be taken with pool tables - depending on database this
661 * will cost performance instead of saving)
662         if select_split ne 0 and h_subrc ne 0.
663           modify coding_tab from coding_alter index select_split.
664           select * from (t681-kotab) appending table <cond_tab>
665                  up to 1 rows
666                  where kappl = se_kappl
667                  and   kschl = se_kschl
668                  and   (coding_tab).
669         endif.
670       else.
671         if se_read_all_prestep is initial.
>>>>>           select * from (t681-kotab) appending table <cond_tab>
673                  up to 1 rows
674                  where kappl = se_kappl
Regards,
Akshay
Edited by: Akshay Dalal on Jan 17, 2009 6:25 AM
Edited by: Akshay Dalal on Jan 17, 2009 6:30 AM

Dear Akshay,
We will NOT be able to provide you with a solution on this forum, because we have no clue what configuration do you have in your system and what user exits or other custom development may have been done in your specific system.
Lakshmipathi has already correctly pointed to a similar post. You might want to get an ABAPer to set a breakpoint just before the error occurs, then he/she might provide you with more information, which may (or may not) be helpful.
There is obviously something wrong in the pricing condition either on configuration level or in a user exit. If you write to SAP (which you should, because it's a standard program), they will ask to connect to your system, because they don't have any chrystal balls over there either.
Just in case - before going any further, try running the program RV80HGEN (in the test system, of course), which re-generates requirements and formulas. Sometimes it helps, although I doubt that it is the case here.
Also if you've used some custom (Z...) fields in the pricing configuration, that's where the problem is most likely.

Non-Fatal Run-time Error "%%s"

Similar Messages

Maybe you are looking for