Non-functioning booksmarks when exporting with Acrobat X

Using InDesign CS5, I export my book documents to PDF Print and include bookmarks and hyperlinks. This has been working just fine using Acrobat Standard, and the person reading the document can navigate through the pages using either the document's Table of Contents or the Adobe bookmarks panel. I recently upgraded to Acrobat Pro X, and now this function no longer works properly. When you click on any Table of Contents bookmark, they all take you to the first page of the document. In addition, the bookmarks in the Adobe bookmark panel do not work at all. When I look at the bookmark properties, they all point to p0. It is possible to manually reset the properties of the Adobe panel bookmarks, but not the TOC, but this is time consuming and doesn't solve the problem. Besides removing Acrobat Pro X from my computer, has anyone found another solution for this problem?

I believe this is a known bug when exporting Books from CS5, and that it is not restricted to Acrobat X.
The only workaround I know is to combine the files into one document.

Similar Messages

Cannot overwrite PDF when exporting to Acrobat from InDesign CS6

When exporting to Acrobat Pro X from InDesign CS6, there are times when I want to overwrite an exising file but I get an error msg that the file is in use (it is not--this even happens when I have closed the file and quit Acrobat) or i don't have permission. In the Info panel at the Finder, i see that "myusername (ME)" does have permission to read and write this file. As a test, I also changed the permissions for Admin and Everyone to Read & Write, but that did not help. I've checked Preferences in both InDesign and Acrobat Pro anc can't find a relevant setting.
To save the file with the same filename as the pre-exisitng PDF, I have to close the pre-exisitng PDF and move it to the trash.
I have no problem overwriting a PDF document from Acrobat. This only happens when I am exporting from ID.
I am on a Mac running the latest version of OSX.
Any ideas?
Thanks!
Carol Gunn

Make sure that the PDF you are trying to overwrite is not selected in your finder. I've found that if it's selected in the finder then the preview tricks Indesign into thinking the file is busy

Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?

I created a PDF with several fields and exported it.
Then I tried to open it with Firefox and the fields didn't appear.
But it works OK with Adobe Acrobat.
Does only Adobre Reader "reads" the fields of a PDF when created with Acrobat?

Adobe software reads form fields. The rules for how to do form fields are a part of the PDF standard (a book available to anyone) but some companies ignore it and others do half a job. To be safe, use only Adobe Reader. And beware of browsers that ignore Adobe Reader even if you have it.

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5

My new iMac with FCPX crashes when rendering complex templates and crashes when exporting with Motion 5
Using Motion 5.0.6 and Final Cut Pro X 10.0.7 on New iMac (December 2012) Mountain Lion,
Intel Core i7 quad-core a 3,4GHz, Turbo Boost fino a 3,9GHz
32GB di SDRAM DDR3 a 1600MHz - 4 x 8GB
Fusion Drive da 3TB
NVIDIA GeForce GTX 680MX 2GB GDDR5
During the rendering of complex FCPX mac crashes and I have to force a restart.
I also happens when I try to export movies with Motion 5.
Does anyone have the same problem with my new iMac?

Problems such as yours are sometimes caused by files that should belong to you but are locked or have wrong permissions. This procedure will check for such files. It makes no changes and therefore will not, in itself, solve your problem.
First, empty the Trash.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click anywhere in the line below to select it, then drag or copy it — do not type — into the Terminal window:
find . $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 -o -acl $ 2> /dev/null | wc -l
Press return. The command may take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear.
The output of this command, on a line directly below what you entered, will be a number such as "35." Please post it in a reply.

Computer freezes when exporting with Adobe Media Encoder

Hi, whenever I start to export via media Encoder, my computer kind of freezes...I am not able to edit or even use any other applictions when exporting with Adobe media encoder. This did not happen with the older version CC7. Any hints please? Very frustrating.

I think the same problem:
Part of audio missing in mp4 AAC rendered files from Watched Folders
Probably with cached files. Try this: Adobe Media Encoder 2014.2 Part of audio missing in mp4 AAC rendered files - cache problem? - Video Production Stack Exc…

Footage pixelated when exported with compressor

I've film HD video and edited with FCP, the aspec ratio on the sequence is 720x480 anamorphic, and it looks great, when I export it with QuicK Time it looks great but DVD Studio Prp doesn't support the settings. when I export it with Compressor, DVD Studio Pro imports it fine, but it is very, very pixelated.
What would be the best option to use when exporting with Compressor.
What I want is that the WideScreen image shrinks when viewing it on a Standard TV, I've done it with iDVD but when watching it on a standard tv is cuts the two sides of the image.
Thank you for your help.

If editing HD material you would be best off editing in the HD timeline, size and Codec (not sure if you did that and then down rezzed?) SD DVDs used compressed video, so anything that compresses things more prior to the compression to an SD m2v (video used on DVDs) can lead to more of a quality hit.
Anyway what you would do is export the movie as self-contained movie, reference movie or directly to Compressor to a 16:9 m2v preset (including one you made yourself) and use that in DVD SP
Take a look [at this thread|http://discussions.apple.com/thread.jspa?messageID=11040698&#11040698] and [this thread|http://discussions.apple.com/message.jspa?messageID=11287710#11287710]
I outline the procedures a bit more and also include links to some movies and other information

Hi I'm new to Mac. I have a macbook air and for some reason the top keys, ec, f1 etc etc are not functioning and emitt the non function noise when pressed. Also the volume keys don't adjust the volume. Have I done something to disable them?

Hi I'm new to Mac. I have a macbook air and for some reason the top keys, ec, f1 etc etc are not functioning and emitt the non function noise when pressed. Also the volume keys don't adjust the volume. Have I done something to disable them?

I don't have the same version of OS X here but try System Preferences>Keyboard. Is there an option similar to "Use the F1, etc, keys as standard function keys"?
If so, and it has a checkmark, uncheck it & see if that does the trick.
~Lyssa

Problem with diacritics when export in Acrobat(PDF)

Hello,
I use reporting service from Sql Server 2008 R2 and I have a problem when I export in Acrobat(PDF) format. All the 'ș' and 'ț' are after export in pdf just a square.
Can you please help me. Thanks.

Hi Alin-g,
SQL Server 2008 R2 Reporting Services supports Adobe Acrobat 6 or later. So, please make sure your current Acrobat version meets the requirement.
Besides, the font in the PDF format may be different with that in the HTML rendering extension because GDI font substitution in those formats behaves differently. If there is a font missing on the client, you might see characters replaced with boxes (□).
For more information, please see:
Exporting to a PDF File (Report Builder 3.0 and SSRS)
Regards,
Mike Yin
TechNet Community Support

How do I stop Illustrator automatically adding numbers to file name when exporting with artboard?

I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time. Anyone knows how to fix this? Thanks.

This has been discussed a few times, and here is a summary of the usual solutions.
http://forums.adobe.com/message/2989508#2989508
What is it EXACTLY you are trying to do. Are you trying to export a single page from filename.ai and make it filename.psd, (without any number afterwards). In that case you could delete the extra artboards prior to export, and then you won't have to checked use artbaords as there is only one page. Otherwise I would plan ahead so your end result will be filename-01.jpg, filename-02.jpg, and then everytime you use export artbaords those names will replace.
I am happy with the function as is, and would prefer to have a serial number automatically after the name when checking use artboards. But sounds liek you and others desire more options and thte ability to turn off adding to the filename.

Why is the Tick Count function slow when used with a .dll but fine with normal lab view code?

when using the Tick Count millisecond timer with a .dll I've written in C, I'm getting some odd timing issues.
When I code the function I want (I'll explain it below in case it helps) in LV and run it as a subVI, feeding it the Tick count as an argument, the function runs quickly, but not quite as quickly as I would like. When I feed this same subVI just an integer constant rather than the Tick Count, it takes about the same amount of time, maybe a tiny bit more on average.
When I bring in my function from a .dll, however, I start to run into problems. When I feed my function an integer constant, it is much faster than my subVI written in LV. When I feel my .dll the Tick Count, however, it slows down tremendously. I'm including a table with the times below:
             | Clock   |   Constant   |
SubVi:   | 450ms | 465ms       |
.dll         | 4900ms| 75ms         |
This is running the function 100,000 times. The function basically shifts the contents of a 2-dimensional array one place. For this function, it probably won't be a huge deal for me, but I plan on moving some of my other code out of LV and into C to speed it up, so I'd really like to figure this out.
Thanks,
Aaron

Hi Aaron,
Thanks for posting the code -- that made things a lot clearer for me. I believe I know what's going on here, and the good news is that it's easy to correct! (You shouldn't apologize for this though, as even an experienced LabVIEW programmer could run into a similar situation.) Let me explain...
When you set your Call Library Function Node to run in the UI Thread you're telling LabVIEW that your DLL is not Thread-safe -- this means that under no circumstances should the DLL be called from more than one place at a time. Since LabVIEW itself is inherently multithreaded the way to work with a "thread-unsafe" DLL is to run it in a dedicated thread -- in this case, the UI thread. This safety comes at a price, however, as your program will have to constantly thread-swap to call the DLL and then execute block diagram code. This thread-swapping can come with a performance hit, which is what you're seeing in your application.
The reason your "MSTick fine behavior.vi" works is that it isn't swapping threads with each iteration of the for loop -- same with the "MSTick bad behavior.vi" without the Tick Count function. When you introduce the Tick Count Function in the for loop, LabVIEW now has to swap threads every single iteration -- this is where your performance issues originate. In fact, you could reproduce the same behavior with any function (not just TIck Count) or any DLL. You could even make your "MSTick fine behavior.vi" misbehave by placing a control property node in the for loop. (Property nodes are also executed in the UI thread).
So what's the solution? If your DLL is thread-safe, configure the call library function node to be "reentrant." You should see a pretty drastic reduction in the amount of time it takes your code to execute. In general, you can tell if your DLL is thread-safe when:
The code is thread safe when it does not store any global data, such as global variables, files on disk, and so on.
The code is thread safe when it does not access any hardware. In other words, the code does not contain register-level programming.
The code is thread safe when it does not make any calls to any functions, shared libraries, or drivers that are not thread safe.
The code is thread safe when it uses semaphores or mutexes to protect access to global resources.
The code is thread safe when it is called by only one non-reentrant VI.
There are also a few documents on the website that you may want to take a look at, if you want some more details on this:
Configuring the Call Library Function Node
An Overview of Accessing DLLs or Shared Libraries from LabVIEW
VI Execution Speed
I hope this helps clear-up some confusion -- best of luck with your application!
Charlie S.
Visit ni.com/gettingstarted for step-by-step help in setting up your system

Final cut pro problem when exporting with quicktime movie

Hello!
I must have som help beacuse my musicmovie must be finsihed untill today. I have a movie their i had used filters like colour correction and interlace. When i export with USING QUICKTIME CONVERSION and have
keyfram 10
bitrate 6000
faster encode
size 1920x1080 HD 16:9
its not a problem the movie works fine all the way.
But when i export with QUICKTIME MOVIE it dosent work. Some clips are frozen and some are beeing misscoloured. None of them have interlace. Its the same clips that dosent work everytime i had export with QM. I have tried to replace these clips but the same thing is happening. I dont understand why i cant use quicktime movie but it works with quicktime conversion.
If you have an e-mail i can send you just the part where this happening.
Please help me!
Thanks Gabriel

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Errors on saved form when designed with Acrobat 9 Pro

I have created a file with Acrobat 9 Pro with fields, check boxes, etc.... for customers to fill in, save, and e-mail/print .
I finally managed to get the form to be saved by any Adobe Acrobat Reader 8 (or above). But when they open their saved , filled-in form, the contents have changed! The boxes they have ticked are no longer ticked, but others are instead...

LiveCycle Designer is no longer distributed as part of the Acrobat release. I think it is available as a separate product. At this point, Acrobat provides the AcroForm type tools (kind of hard to get to, just as in some previous versions) and the option for Forms Central. The whole focus has changed. I suspect that others may be in the same situation of trying to get their forms to interact in Acrobat or Forms Central, but at this point I do not think there is any way to back Designer forms into either of the two current formats. Not much help, but a comment in any case.

ORA-39126 when exporting with expdp

Hi there,
I'm getting a crash on 11g 11.1.0.7 when exporting a schema using expdp:
expdp
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 3.096 GB
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA [TABLE_DATA:"NSNPL"."SYS_EXPORT_SCHEMA_02"]
ORA-22813: operand value exceeds system limits
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPW$WORKER", line 7839
----- PL/SQL Call Stack -----
object      line object
handle    number name
0x14d81a160     18237 package body SYS.KUPW$WORKER
0x14d81a160      7866 package body SYS.KUPW$WORKER
0x14d81a160      2744 package body SYS.KUPW$WORKER
0x14d81a160      8504 package body SYS.KUPW$WORKER
0x14d81a160      1545 package body SYS.KUPW$WORKER
0x14d81db88         2 anonymous block
ORA-39126: Worker unexpected fatal error in KUPW$WORKER.UNLOAD_METADATA []
ORA-22813: operand value exceeds system limits
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 86
ORA-06512: at "SYS.KUPW$WORKER", line 7834
----- PL/SQL Call Stack -----
object      line object
handle    number name
0x14d81a160     18237 package body SYS.KUPW$WORKER
0x14d81a160      7866 package body SYS.KUPW$WORKER
0x14d81a160      2744 package body SYS.KUPW$WORKER
0x14d81a160      8504 package body SYS.KUPW$WORKER
0x14d81a160      1545 package body SYS.KUPW$WORKER
0x14d81db88         2 anonymous block
Job "NSNPL"."SYS_EXPORT_SCHEMA_03" stopped due to fatal error at 00:57:23
This look awfully similar to bug 6991626 (cf ID 737618.1), however the database has already been successfully patched (and in fact even repatched) for this bug:
$ORACLE_HOME/OPatch/opatch lsinventory
Invoking OPatch 11.1.0.6.2
Oracle Interim Patch Installer version 11.1.0.6.2
Copyright (c) 2007, Oracle Corporation. All rights reserved.
Oracle Home       : /opt/oracle/db11g
Central Inventory : /opt/oracle/inventory
   from           : /etc/oraInst.loc
OPatch version    : 11.1.0.6.2
OUI version       : 11.1.0.7.0
OUI location      : /opt/oracle/db11g/oui
Log file location : /opt/oracle/db11g/cfgtoollogs/opatch/opatch2010-06-02_08-23-53AM.log
Lsinventory Output file location : /opt/oracle/db11g/cfgtoollogs/opatch/lsinv/lsinventory2010-06-02_08-23-53AM.txt
Installed Top-level Products (2):
Oracle Database 11g                                                  11.1.0.6.0
Oracle Database 11g Patch Set 1                                      11.1.0.7.0
There are 2 products installed in this Oracle Home.
Interim patches (6) :
Patch 6991626      : applied on Tue Jun 01 22:35:32 WET 2010
   Created on 14 Oct 2008, 23:25:07 hrs PST8PDT
   Bugs fixed:
     6991626
[...]Does anyone have an idea on what might be the culprit here?
Thanks for your help,
Chris

Hi Prathmesh,
in fact I saw this very thread before and I made sure that both solutions were applied. Moreover as I said patch 6991626 had already been applied earlier, precisley to fix this problem, and I've had been able to successfully export other albeit somewhat smaller schemas (500M instead of 3GB) in the last few months. This is why I was so puzzled to see that exact bug raise its ugly head again. As far as I can tell I didn't do any modification to the DB since that last patch in nov. 2009. In fact the DB has been running pretty much untouched since then.
I even tried yestereday to reinstalled the patch again; opatch does the operation gracefully, first rolling back the patch then reapplying it again, with only a warning about the patch being already present. However the pb does not get fixed any better.
Thanks a lot for your help,
Chris

Strong red tint when exporting with prores

Hello There,
I'm using 5D Footage that i converted to AppleProRes (HQ) with the compressor and edited it in FCP plus did some grading in Color. Everything looks fine when I export with H.264.
However, I need to export the material with ProRes again because it will be used in Adobe After Effects, so i want to keep a high qualitiy. Now, when i'm exporting from FCP with the prores422(HQ) codec all the midtones have an extremely red tint and the contrast and the saturation is much higher than how i see it in Colors and FCP. Is this some kind of error or is there something i'm doing wrong here?
THX for ur help!

Prores LT is more than good enough for your 5D footage. You will not get any more quality than is already there by going to ProRes HQ. You will get considerably larger files that might not play back smoothly on your computer.
Humor us and tell us what happens when you run this workflow on a short ProRes LT clip.

What Rendering intent is used when exporting with a different color space?

Hi,
I would be ever so grateful if any one can tell me what rendering intent is used by LR4 when exporting using a custom colour space as there is not an option as there is with the print module.
Thanks.
Message title was edited by: Brett N

Jeff Schewe wrote:
Bob_Peters wrote:
The rendering intent in the Export dialog is Perceptual.
Actually, an RGB color space to RGB colorspace is always only Relative Colorimetric...and adding Perceptual would only work with certain V4 ICC color spaces (you can find perceptual V4 color spaces for sRGB and ProPhoto I think but I'm not sure they would work in Lightroom anyway).
When using an RGB print output profile you can select either Perceptual or Relative and have the intents actually applied.
True.
The case of interest to me is when I have to print a lot of files using a third-party profile and maintain the original filename so it appears on the back. That is why I made the request more than a year ago.
The problem with the Print module is that it clobbers the filename but does allow 2 choices for the rendering intent. Having to deal with weird filenames creates a mess when matching, say, 50 prints with custom notecards.

Non-functioning booksmarks when exporting with Acrobat X

Similar Messages

Maybe you are looking for