Non functioning system

Purchased a KT3 Ultra2 after reading good reviews. Replaced old Chaintech CT-7AJA motherboard. Fitted new 512MB DDR memory module (PC2100). Reconnected all devices etc. Switched on power. Front panel power LED came on. Hard drive LED came on for 20 seconds. Then nothing. No screen activity at all. No P.O.S.T. messages on screen. Put a floppy disk in the floppy drive. Floppy light did not come on after a reboot. Tried booting without memory module and beeping sounds heard. Replaced memory, still non functioning system. Put old mother board back. Every thing works fine. Took board back to PC World who replaced it. Tried again. Still non functioning. The problem is not my processor as it still works fine on old motherboard. (Removed sticky label from your socket A socket and used special cooling compound on heatsink).Problem is not my devices as they work fine on the old board.
Has anyone else ever had this problem?
It doesn't seem logical.
Any suggestions appreciated.

Quote
Originally posted by wonkanoby
you are going to have to format the drive and reload
Why?? It is not even posting so it has nothing to do with OS problems. Yet. Even so I can't see any reason to format and reinstall an OS just because you have a new MB. Driver conflicts can be sorted out in safe mode.
To Geoffery, What are your PSU current ratings for 3.3V and 5V rails? Are you positive you have your heatsink around the right way? Machined slot must go over the raised portion of the CPU socket.

Similar Messages

  • System Preference Panes non-functional (some)

    I am "fixing" a friends MacBook Pro as a favour, and she's getting exactly what she paid for. It may be a few years old - not sure. It's running Snow Leopard, 10.6.8, but I'm putting it in this more general section because it may not be SL-specific.
    A few of the System Preferences panes don't work. A message comes up which simply says "non-functional" or something like that. Specifically, the ones whcih don't work are:
    Desktop and ScreenSaver
    Spotlight
    Energy Saver
    Background: she forgot her password, and this is on a computer which was formerly someone else's. I couldn't even get the thing to the login screen, so something else was wrong besides her password, but I had her gray Snow Leopard installation disks, so got through the re-install process, made a new User for myself, as Administrator, and was then delighted to find that all of her data was still intact. I had to add myself in to the permissions on her UserID. I made a new user for her as well, because we still didn't have her own original password, and I looked around but couldn't find it. I copied all of her data over to her new UserID.
    I also did all Updates, plus tried a 10.6.8. combo update.
    Then I made an error. The former owners UserID was also still there. We couldn't log on as her either, without her password, but I figured that we didn't need that anymore, checked with the current owner first, and deleted the original User (and renamed the computer). I cannot reconstruct in my mind whether the System Preferences panes malfunction occurred before or after deleting the original User.
    There is other minor wonkiness, but basically the machine is running and the data has been preserved (and now backed up). But one thing at a time: I've reinstalled the OS a couple of times, without improvement. I tried to upgrade to Mavericks, but after downloading, it told me that this computer could not be upgraded (without saying why not).
    I haven't found any plist files which look relevant. I did more 2 of them out of HD-Library-Preferences, without any effect, so put them back. I find the Preference Panes in System-Library-PreferencePanes, but didn't see anything to do about that. The offending panes look like they're at least present.
    Is there something simple I'm missing? Can I get those panes back?
    Thank you.
    Charles

    Macbook pros need to be at least 2009 for 13" and 2007 for 15" and 17" to run Mavericks.  see system requiements.
    At this point, the easiest solution will be to make your backups current, then wipe the drive and do a clean install of the system. That means more work reinstalling the backed-up data (you only want to restore data and third-party apps, not any of the system components), but it makes sure you get a clean, working copy of the system.

  • S10 HW 1/06, bge driver non-functional

    Hello,
    I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
    Is there any way I can report a bug without a Support Contract from Sun?
    The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
    One other detail are the following messages from the bge driver on load:
    ddi_intr_get_supported_types(): Returned 3
    Using legacy interrupt type
    bge_add_legacy_intrs
    Thanks in advance for any help...
    -mato

    Hello,
    I'm having a problem with a new installation of Solaris 10 (HW 1/06) on a Fujitsu Siemens ESPRIMO P5905. It's a fairly new model x64 box. The system installed fine, but the on-board Broadcom Gigabit Ethernet is non-functional. I've tried both the Broadcom bcme driver and the Sun bge driver, plus I've installed the latest patches from Sunsolve (118844-30, 122028-02) with no luck. The system finds the card and appears to receive packets but not send.
    Is there any way I can report a bug without a Support Contract from Sun?
    The card is an on-board PCI-E chip and works fine under Linux 2.6 or Windows Server 2003. The PCI ID is pci11e4,1677 which is listed in /etc/driver_aliases for the latest (patched) bge driver.
    One other detail are the following messages from the bge driver on load:
    ddi_intr_get_supported_types(): Returned 3
    Using legacy interrupt type
    bge_add_legacy_intrs
    Thanks in advance for any help...
    -mato

  • Uploading data from non sap system to sap system

    hi to all experts,
    my requirement is to upload data into the sap system from non sap system . the data is in  a flat file ,but the problem is that  in the flat file all the field lengths and fields are not in order or same as sap system. How to upload the data into sap system ....

    hi,
    the data is in a flat file,but the problem is that in the flat file all the field lengths and fields are not in order or same as sap system.
    If the data is in excel sheet use this FM.
    CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
        EXPORTING
          FILENAME                      = P_FILE
          I_BEGIN_COL                   = 1
          I_BEGIN_ROW                   = 1
          I_END_COL                     = 17
          I_END_ROW                     = 3000
        TABLES
          INTERN                        = itab
    EXCEPTIONS
      INCONSISTENT_PARAMETERS       = 1
      UPLOAD_OLE                    = 2
      OTHERS                        = 3
    It will read the data from excel sheet column wise and then store it in ITAB. you can change the order after reading the file.
    In case of Text file use FM  GUI_UPLOAD.
    You can change the order of the fileds after reading it from file, but the length and all you have to make compatible to SAP standard fields.
    Regards,
    Sachin

  • SAP to External Non SAP Systems C++ Connections

    Hi guys,
    i should develop a C++ application that should transfer/receive data from an external Non SAP System to a SAP System (MM SD FI Modules) and viceversa,
    This bidirectional integration should be synchronous and asynchronous, depending on the data flow type,
    I was thinking to use IDocs for this communications,
    I should be able to send purchase and sell orders requests from the Non Sap System to the Sap system and receive the result of SAP processes once the SAP transactions will be finished.
    So i'll have a C++ process that send idocs (created with sdk end sent throught RFC to SAP) for SD or MM operations and a SAP Abap module that receive this idocs and start internal operations.
    After this i need an internal SAP abap module that send to my external application Idoc's with the result of internal operations.
    Are the idocs the common way to transfer data(low cadinality) in this scenario, or there is a better way?
    Note: my sap system versions are previous to the netweaver release, so i can't use a Service Oriented comunication...
    Thanks in advance!!!

    Hi,
    try sending the data through BAPI Function Module.
    and use the FM in your C++ program.
    hope this works....
    try
    best of luck!!
    thanks
    ravi aswani

  • Idoc  b/w sap(r/3) and non sap system .

    hi gurus,
    how i pass an outbound idoc  b/w sap(r/3) and non sap system .
    which  function module we will use in this scenerio for inbound and outbound idoc both
    please guide me  with an example .

    Hi Pawan,
    Non SAP system should have RFC adapter in order to receive and send Idocs from/to SAP.
    If this is not your case, you should us a Integrator Middelware with RFC and standard adapters like SAP Exchange Infrastructure.
    If for example, your non SAP system is able to process data from flat files you can build next interface: SAP send Idocs to middleware that receive them using RFC adapter, middelware maps Idocs into flat file and send it to a one of non SAP system folder using FTP adapter. Non sap system triggers the flat file into its applications.
    Reward points if useful.
    Roger

  • Conversion Error in IDOC  : Unicode to Non-Unicode System

    EBP system (Unicode) posting goods movement to 4.6C (non-Unicode) using message type MBGMCR ( Function module - IDOC_INPUT_MBGMCR).
    **In Non-Unicode System***
    Idoc INBOUND error : Status 51
    An error has occurred assigning data (E1BP2017_GM_ITEM_CREATE ).
    I found in debugging value assigned from EDIDD ( E1BP2017_GM_ITEM_CREATE = IDOC_DATA-SDATA ) for field AMOUNT_LC is "0000            0.00"
    system catch exception with CONVERSION_ERRORS
    **Unicode System**
    Value for Amount_lc is 0.00
    Can anybody help me how to solve above issue?
    regards,

    You can do something like this..
    TABLES E1BP2017_GM_ITEM_CREATE .
    E1BP2017_GM_ITEM_CREATE-AMOUNT_LC = <field value> .
    MOVE E1BP2017_GM_ITEM_CREATE TO IDOC_DATA-SDATA  .
    can u tell me what is the type and value of the variable whose value you are assigning to AMOUNT_LC .
    Reward points to all the helpful answers.
    Thanks.

  • *IDOC INBOUND ( NON SAP system - SAP system )*

    I am transferring IDOC  INBOUND ( NON SAP system ->> SAP system ) by calling SAP standard funtc module IDOC_INBOUND_SINGLE using SAP JCo.
    In which I am passing all necessary information in Control Record regarding sender and receiver port/IDOC/segment etc.
    BUT help me to clarify my doubt that if i am calling a function and i am able to access SAP FM, then why i have to specify the SAP port/RFC connection at RECEIVER end in WE21.
    Whats the Significance if i am calling the FM from same SAP system and configuring the port explicitly in WE21.*
    If i don't Specify in we02 i am getting error as EDI : RECEIVER PORT in CONTROL RECORD is INVALID

    Dear Sree,
    For Basic understanding of IDOC read : saptechnical - Step-by Step ALE IDOC guide ( all necessary TCodes available here )
    Kindly let me know your data flow .
    In short :
    As per my scenario the data flow is from  non SAP to SAP  i,.e. Inbound processing.
    At my non SAP  i am calling SAP standard function IDOC_INBOUND_SINGLE using SAP Jco 2.1.
    You have to fill all Control Structure EDI_DC40 ( port etc. ) and Table parameter EDI_DD40 ( segment etc. )
    Read IDOC status and error in WE02.
    Goodluck.
    - Aakash

  • Editing expressions in non-development systems.

    Our first use of BRF+ met a large success among our business key users and  they are requesting now the maintenance of some decision tables.
    We therefore followed the guidelines of document "editing BRF+ component in non-development systems" and implemented interface IF_FDT_APPLICATION_SETTINGS.
    All went fine on this part, but we hit major troubles with the authorization parts.
    Due to the fact that our application was defined as 'customizing', we keep having message "System settings do not allow changes for customizing objects" and asks for authorization object S_TRANSPRT in production.
    Having the application set to 'customizing' was not the best idea, as all objects created afterwards inherited automatically from this property.
    Is there any way to force the status of specific expressions (not all at it would not make sense) from customizing to master data ?

    As Christian explained you may split your use case in two applications.
    I anyway recommend for bigger use cass to put function and (shared) data objects into a system application and rules into a customizing application. In scenarios where you frequently need to change rules you can also use a master data application, not only customizing.
    However, we have seen several issues with customers changing rules in the productive system (be it master data or be it customizing with the application exit). The problems are
    missing checks for activation of changes (although customers could implement exist for any specific checks they want)
    conflicts with imports (again, customers could implement custom code in exits to prevent some of the issues)
    missing activation workflow (also here custom solutions may help)
    times where BRFplus may fall back into interpretation mode because of changes happening in parallel
    As a consequence I generally do not recommend changing rules in productive systems directly. Instead my recommendation is NW Decision Service Management which provides you all the tools to perform your changes, test them, deploy (with or without release workflow) and use them (always generated code).
    - Features of DSM

  • Carry out repairs in non-original system only if they are urgent

    Hi Experts,
    I am getting this message "Carry out repairs in non-original system only if they are urgent" while i try to edit a z function module which i have created in the development system. Because of this I can't change the code, I need to use the insert, delete....buttons.
    Please help , itz urgent.
    Thanks & Regards,
    Soumya.

    Hello Soumya
    Obviously the Z-function module was originally created on another development system. Therefore you get this message.
    If you have transferred your function group to another development system then simply change the source system of the function group. You can do this using transaction SE03 (function "Change Object Entries...") or you can use function module TRINT_TADIR_MODIFY.
    Regards,
      Uwe

  • Sending special characters to non-unicode non-sap system: user exit

    Hello All,
    We are sending data from a SAP unicode system to a non-sap non-unicode system via IDOC. The idoc is standard idoc GLMAST which contains gl account information.
    Some text fields contained in this idoc can contain special Polish characters. If they are sent unchanged to the non-unicode system, they give problems in the destination system.
    What we would like to do is to build a user exit to convert these special characters, for example : 'é' becomes 'e', ....
    We used enhancement object ALE00001, function EXIT_SAPLBD11_001 and implemented it, but it seems this exit is not called. Can this user exit be used for this functionality?
    We also tried to change in SM59 the type of system of the destination to non-unicode, so that SAP replaces those special characters by #. But, than the error 02. Codepage not found is given in the idoc. Note: the link to the external system is not set up yet, so no actual connection is possible. Is this why we receive this error, and will this functionality work in the end with a non-sap system?
    Thanks for helping.
    Kind Regards,
    Bart Pelsmaekers

    I faced this problem in many project i implement below logic.
      DATA: c_splchar(2) VALUE '90',
            c_defaultchar(1) type c VALUE '#'.
    You have to move one by one character to this function module
              CALL FUNCTION 'URL_ASCII_CODE_GET'
                   EXPORTING
                        trans_char = spl_char
                   IMPORTING
                        char_code  = spl_code.
    All non unicode(Better you check) are always greater than 90.
             if spl_code is gt c_splchar.
                move c_defaultchar to c_splchar.
             endif.       
    "Reward points if usefull"
    Thanks,
    Narayan

  • Wired interface non-functional

    So I have a most unusual problem with a mac mini server that is driving me banana's that I hope someone in the Apple community has run into, and found a decent solution..
    The mac mini (2.3GHz quad core i7, late 2012) is running 10.9 and server 3.0.1.   I did an upgrade from 10.8 (and whatever the previous version server was)..
    Since then the wired ethernet interface (en0) literally stopped working. (Links up, but no connectivity.. no ping, it does not even send an ARP)
    Data points about the problem.
    - It worked flawlessly up until the upgrade to 10.9.
    - wireless interface is still fine, static or dhcp.
    - The IP is statically configured via System preferences - Network.
    - ifconfig in terminal show NO IPADDRESS assigned to the interface.
    - if I reconfigure the interface to DHCP, it will not receive an IP and ends up with an APIPA address..
    - if I go into terminal and 'ifconfig en0 down' then 'ifconfig en0 <IP> up' the interface works again until restart.  It will also correctly display the IP in terminal.
    - If I reset, it goes back into this same state (network preferences shows proper config, ifconfig does not, and the interface is non functional)
    - If I then go to cli, and manually ifconfig down then up, all is good again..  Doing so from system prefs has no affect..
    Here is where it gets really interesting, and why I am convinced this is a software issue..     I did a clean install of 10.9 and Server on an external USB disk, and things work exactly as expected if I boot from that Volume..  If I boot from the internal drive, Its in the broken state again..
    This absolutelty tells me its some kind of software issue, and I am out of ideas short of wiping the internal drive, and reloading all the data from scratch..
    Anyone else run into this?  If yes, were you able to fix it without wiping/reloading?

    First, thank you for taking the time to respond and offering great ideas..
    I'd delete the interface & recreate it.
    In 'System Preferences > Network tab' select the ethernet, click the - button. Then add it again. Reboot & see if it has any effect.
    - Had no affect..  More accurately, it works the same as doing ifconfig down/up in cli, where the interface will work again until the next reboot.
    See what appears in Console (Spotlight search for it) in the 'All messages" section when you remove connect the ethernet.
    - Log messages are below..  Interestingly, I do not get the failure messages that I have highlighted in red on another machine that is is also running 10.9, with server loaded.
    11/23/13 10:14:36.000 AM kernel[0]: AppleBCM5701Ethernet [en0]: Link down (womp disabled, proxy idle)
    11/23/13 10:14:37.135 AM configd[24]: network changed: v4(en1:10.1.10.10, en0-:10.10.10.1) DNS Proxy SMB
    11/23/13 10:14:52.000 AM kernel[0]: Ethernet [AppleBCM5701Ethernet]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, EEE enabled, Debug [796d,0301,0de1,0300,cde1,7c00]
    11/23/13 10:14:52.418 AM configd[24]: arp_client_transmit(en0) failed, Device not configured (6)
    11/23/13 10:14:52.419 AM configd[24]: MANUAL en0: arp probe failed, arp_client_transmit(en0) failed, Device not configured (6)
    11/23/13 10:14:56.501 AM ServerEventsDaemon[221]: NetworkConfiguration: Handling network change.
    Have you tried changing the port on the switch it is connected to?
    - Yes, for ease of testing I have it plugged directly into my MacBook Pro  (I also tried new cable first )
    Does safe mode have any effect?
    - No, Same results.
    Again, booting the machine from a clean install on a USB disk, does not show the issue..    I’ve got a lot of data on the machine, so I am doing anything I can to avoid wiping and reloading it all..  Ive added the output of etrecheck, in case its of any help.
    Hardware Information:
              Mac mini (Late 2012)
              Mac mini - model: Macmini6,2
              1 2.3 GHz Intel Core i7 CPU: 4 cores
              16 GB RAM
    Video Information:
              Intel HD Graphics 4000 - VRAM: 1024 MB
    Audio Plug-ins:
              BluetoothAudioPlugIn: Version: 1.0
              AirPlay: Version: 1.9
              AppleAVBAudio: Version: 2.0.0
              iSightAudio: Version: 7.7.3
    Startup Items:
              ChmodBPF - Path: /Library/StartupItems/ChmodBPF
    System Software:
              OS X 10.9 (13A603) - Uptime: 0 days 0:4:7
    Disk Information:
              APPLE HDD HTS541010A9E662 disk0 : (1 TB)
                        EFI (disk0s1) <not mounted>: 209.7 MB
                        Macintosh HD (disk0s2) /: 999.35 GB (928.22 GB free)
                        Recovery HD (disk0s3) <not mounted>: 650 MB
    USB Information:
              Apple Inc. BRCM20702 Hub
                        Apple Inc. Bluetooth USB Host Controller
              Apple, Inc. IR Receiver
              Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)
              Dell Dell USB Keyboard
    FireWire Information:
    Thunderbolt Information:
              Apple Inc. thunderbolt_bus
    Kernel Extensions:
              com.logmein.driver.LogMeInSoundDriver          (1.0.2)
    Problem System Launch Daemons:
    Problem System Launch Agents:
    Launch Daemons:
              [loaded] com.adobe.fpsaud.plist
              [loaded] com.enterasys.NacAgent.plist
              [loaded] com.google.keystone.daemon.plist
              [not loaded] com.logmein.logmeinblanker.plist
              [loaded] com.logmein.logmeinserver.plist
              [loaded] com.logmein.raupdate.plist
              [loaded] com.parallels.desktop.launchdaemon.plist
              [loaded] org.macosforge.xquartz.privileged_startx.plist
    Launch Agents:
              [loaded] com.google.keystone.agent.plist
              [failed] com.logmein.LMILaunchAgentFixer.plist
              [loaded] com.logmein.logmeingui.plist
              [loaded] com.logmein.logmeinguiagent.plist
              [not loaded] com.logmein.logmeinguiagentatlogin.plist
              [loaded] com.parallels.desktop.launch.plist
              [loaded] com.parallels.DesktopControlAgent.plist
              [loaded] com.parallels.vm.prl_pcproxy.plist
              [loaded] org.macosforge.xquartz.startx.plist
    User Launch Agents:
    User Login Items:
              iTunesHelper
              smcFanControl
              Dropbox
    3rd Party Preference Panes:
              Flash Player
    Internet Plug-ins:
              Default Browser.plugin
              Flash Player.plugin
              FlashPlayer-10.6.plugin
              googletalkbrowserplugin.plugin
              LogMeIn.plugin
              LogMeInSafari32.plugin
              npgtpo3dautoplugin.plugin
              o1dbrowserplugin.plugin
              QuickTime Plugin.plugin
    User Internet Plug-ins:
    Bad Fonts:
              None
    Time Machine:
              Auto backup: YES
              Volumes being backed up:
                        Macintosh HD: Disk size: 999.35 GB Disk used: 71.13 GB
              Destinations:
                        Backups [Network] (Last used)
                        Total size: 999.18 GB
                        Total number of backups: 14
                        Oldest backup: 2013-11-23 01:19:19 +0000
                        Last backup: 2013-11-23 14:59:37 +0000
                        Size of backup disk: Adequate
                                  Backup size 999.18 GB > (Disk used 71.13 GB X 3)
              Time Machine details may not be accurate.
              All volumes being backed up may not be listed.
    Top Processes by CPU:
                  9%          35FC0000
                  3%          mds
                  3%          WindowServer
                  2%          36000080
                  1%          syncdefaultsd
                  1%          EtreCheck
                  1%          postgres: caldav postgres [local] startup
                  1%          fontd
                  0%          SubmitDiagInfo
                  0%          prl_disp_service
    Top Processes by Memory:
              147 MB             com.apple.IconServicesAgent
              82 MB              Dropbox
              82 MB              com.apple.WebKit.WebContent
              82 MB              Safari
              82 MB              Finder
              66 MB              mds_stores
              66 MB              CalendarAgent
              66 MB              CalendarServer 5.1 (Apple Calendar Server 21.17.39) [Agent]
              49 MB              mds
              49 MB              soagent
    Virtual Memory Statistics:
              11.80 GB           Free RAM
              2.69 GB            Active RAM
              436 MB             Inactive RAM
              1.08 GB            Wired RAM
              258 MB             Page-ins
              0 B                Page-outs

  • K8N Neo4 (MS-7125) USB, Mic, S/P Out, and LAN ports all non-functional

    I'm hoping someone can give me a hand with this.  I'm not a novice when it comes to motherboards but this particular board is making me feel like it.
    Ok, I've got a K8N-Neo4 MS-7125 model.  Athlon64 3700.  I have all the current drivers and ran the liveupdate to make sure. 
    The LAN port will light up, but the Device manager will not recognize it, nor will the LAN utility.
    The board has 4 USB ports.  The top two are non-functional, the bottom two work.
    The S\P OUT port has never worked, nor do I know how to engage it or find it on the device manager
    The microphone....this one is fun.  Its like the microphone is stuck in a feedback loop.  Whatever comes through my speakers, is heard on the other end by other users.  I am not heard at all, although I can hear myself through my OWN speakers.  Even with the mic unplugged, people still can hear my speakers.  Imagine having your speakers plugged into the mic jack.  The only way to kill the feedback is to actually go into the sound manager and mute the whole mic system. 
    I can live without the LAN and USB ports, but it would be a HUGE help if someone can help me with the mic and S\P ports!!
    Thanks!!!

    Ok, I'll do my best to remember everything   
    Athlon64 3700 939socket
    XP Pro Service pack 2
    Rosewill case 400watts
    SonyDVDRW Drive (dual layer)
    Samsung DVD drive
    GEForce 7300 256DDR (PCI Express)
    120GB Seagate 7200 RPM Harddrive  (IDE) Partioned two drives
    1x512DDR ram  PC3200 400mhz
    As for the flavor of the NEO4 the only other numbers I know of, is on the board it says N1996 right below the processor.  Is that what you need?  Its a PCB V.3 board nvidia Nforce4.
    Speakers are standard cyber acoustic
    Logitech Mic/Headset combo
    This particular case allows for hookups for headphones and mic in the front.  The case has jumpers in the back that allow you to gain access from the front (but you probably already know that).  I've always used the front MIC/Headset jack, and I have a splitter in the back for the headphones and that jumper.  In trying to resolve the issue, I tried every jack with the microphone (even the ones that I know are labeled as speakers).  I do get my own voice through MY speakers on the front jack AND the mobo jack.
    Hopefully I got you enough info!
    Thanks in advance!!!

  • Late 2013 15" Macbook Pro - iCloud Apps become non-functional

    Hi Everyone,
    My new top of the range Macbook Pro has some issues... Here's the specs:
    2.6GHz Quad-core Intel Core i7
    16GB 1600MHz DDR3L SDRAM
    1TB Flash Storage
    Arrived on Tuesday last week. Obviously very excited etc...
    Noticed after 30 minutes that all my iCloud apps failing (under my account).
    All the following apps fail to open with a beachball timeout
      iMessages
      FaceTime
      iCloud (via System Preferences)
      Maps
      TextEdit (won't show any existing iCloud documents
      Airplay
    However oddly enough Calendar works.
    It's currently with Apple Engineering who are yet to reply.
    Now the weird bit.... If a create a new login account under the macbook and utilise my wife's iCloud (apple id) everything works perfectly.....
    Apple are now in the process of sending me out a new machine since they're considering this one Dead On Arrival..However I've now got a 3 to 4 week wait due to 16GB ram supply constraints.. :-(
    I've reinstalled Mavericks 4 times now and the same issues come back within about 30 minutes.
    Very frustrating to spend that much money and have a non-functional computer..
    Anyone else experiencing these issues?
    Cheers.
    Benjamin.

    I can happily report now that the issue has been resolved.
    Via the logs sent to Apple engineering the issue was found to be a conflict between iCloud contacts and Google contacts.
    For some reason (a bug in Mavericks) even though I didn't tick the box for google contacts to come across to the MacBook, it turned itself (in Internet Accounts via sys pref) on when activating my mail (gmail).
    I'll say it again. It turned the tick on internet accounts / gmail / contacts without me asking it to!
    Also of note. If I had iCloud contacts turned off. After the 30 minutes iCloud contacts were also turned on. Very very weird behaviour!
    The above meant that the Mac's contacts were syncing with iCloud and google. :-(
    Why this issue affected all the other iCloud apps I'm not sure why. However it definitely did something! :-(
    Resolution Path:
    Go to Sys pref/internet accounts, select gmail and click the minus button. It prompts you if you want to delete from ALL associated machines. Click YES!
    Only after confirming I wanted to do a remote delete of my iCloud internet accounts across ALL machines did the issue resolve itself.
    It appears that iCloud and google contacts can't live (stay sync'd) together. Which of course was never my intention. I only wanted to use iCloud.
    Doesn't explain why it failed internally but a resolution path was found :-)
    The inbound replacement laptop has been cancelled accordingly.
    My new MacBook is now running perfectly !!!
    I hope the resolution path here posted may help others in the future if you encounter this issue!
    Take care,
    Bennie.

  • EWA on Non-ABAP System with Solution Manager EHP 1

    Hi Experts,
    We have recently updated our solution manager from SP Stack 16 to EHP1 (sp 18). we are now planning to set up EWA for non-abap components (EP 7.0). however, the only SAP note that i have been able to find is "976054 - Availability of EWA for Non ABAP components" but this is only limited up to SP 17. I have not been able to find any guides relating to EWA thru Solution Manager EHP1.
    I would greatly appreciate if anyone can refer any documents or SAP notes that would enable setting up EWA for non-abap components thru Solution Manager EHP1.
    We have also gone through the note 1332428, but we have'nt found it useful. We are still struggling to generate EWA report on Non-ABAP system.
    Looking forward to your kind help.
    Thanks and Regards,
    Sarthak Syal

    Hi Sarthak,
    Good!!
    Please do  the following:
    1) include the system in the Solution and scheduled the EWA session.Logical component should refer to the Non-ABAP System with no ABAP instance as relevant under the SID definition in SMSY-systems.
    2) Is the Non -ABAP ( assuming its java) has the Software component defined and is mentioned as relevant under the SID with the component name and type.
    3) Having said that SMD - Root cause Analysis functionality is configured-> check whether you are getting the Details for the Non-ABAP systems in the analysis Tabs of Root Cause Analysis.
    This should be good to go. Wait for the session to get completed.
    Thanks,
    Jagan

Maybe you are looking for