Non geographic, special and premium numbers

I have a uk based number which can be used in various european countries and no roaming fee will be charged on incoming calls when i am outside uk. If i purchase unlimited united kingdom subscription, in which i get unlimited calls to uk mobile, and try to call this specific number, will i be charged extra. Please note that it is given that unlimited united kingdom subscription excludes Non geographic, special and premium numbers

Hi there, i found some info that might help...
Skype seem to talk about non geo numbers as shared cost numbers
if you go to this page 
https://support.skype.com/en/faq/FA322/what-is-a-u​k-shared-cost-number?frompage=search&q=special+pre​...
then clcikc the "check price of payg calls" link it takes you to this page  
http://www.skype.com/en/rates/?currency=GBP#cc=GB
then click "view rates under UK" (when it stop bouncing around) 
then click "view all PAYG calling rates" this is just a pop up so no link..
the pop up show with costs with cost ex vat as fist price and inc vat as second price
United Kingdom - Shared Cost - 0844
7.00p8.1p
United Kingdom - Shared Cost - 0845
8p9.2p
United Kingdom - Shared Cost - 0870
11p12.7p
United Kingdom - Shared Cost - 0871
13.5p15.5p
United Kingdom - Shared Cost-0843
7.00p8.1p
United Kingdom - Shared cost - 0872
13.2p15.2p
United Kingdom - Toll Free
0p0p
you can also see the cost of call when you dial the number .... but I can't find a link to that desciption doc
hope this helps
Paul

Similar Messages

  • UK non geographic numbers

    Hi,
    Is there a list of charges to UK non geographic numbers e.g. 0844 0845 0871 ?
    many thanks

    If you want them all displaying in the meeting invite, you'll have to add all of the numbers to the same region as Barry suggested.  However, if you do this, you won't see any location information associated with them (this is for the UK, this is for
    DE).  Perhaps that won't matter too much because people will see their country codes and recognize that, otherwise you have two options here. 
    1) Create different regions and hope people click the "Find a local number" link in the meeting invite.
    2) Put them all into a single region but change the display name to include the country name.  The issue with this is that the number becomes un-clickable from Lync.
    Past that you're manually editing each meeting request.  No perfect option I've found here.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications

  • The infamous Conditional Formatting and page numbers

    I've been digging through these posts and I see that conditional formatting and page numbers is a common topic, but none of the posts I've seen seem to come up with an answer to my suituation:
    (Apologies in advance, I know this has been covered in many previous posts, just don't seem to be able to decipher a clear answer...)
    I have a client who wants a boilerplate item - the word "OVER", to signify a miltiple page report - to be printer on the botton right of the page, BUT as usual there are seeveral conditions when they want it NOT to show.
    First, they wnat it to only print when a specific Source is selected. That's a database field, and I have that conditional formatting piece working,
    Second, they only want it to print on ODD numbered pages, I think I can use something like MOD(SRW.GET_PAGE_NUM(x),2)=0 to determine whether or not it's an odd numbered page, but havn't been able to try it yet,
    Third, if the report is only a single page they don't want it to print at all. Not sure how to accomplish this, since the holy grail of the conditional formatting seems to be the total number of pages, and none of the posts I've seen have been able to get this.
    Any ideas?

    The "Select All" button selects all cells that have the format you are looking at. It makes it so you can easily modify them all at once.

  • (none) style gets applied to numbered list & font size not matching text in my style sheet

    RoboHelp 9 (9.0.2.271)
    Something is wrong with my style sheet, and it only started happening after I created Master Page for the first time. This happens whether or not the new Master Page is applied to a topic:  Every time I type any text in a topic, then click the Numbered List icon in the toolbar, the style goes from Normal to (none), and the font changes from my style sheet's Normal 10pt to 8pt, for the number as well as the text.
    I don't see how the new Master Page has anything to do with it because it's not applied to this particular topic.  I had created a Master Page in RoboHelp HTML and applied my style sheet, then my topics to it. I have a footer in the Master Page and applied 8pt font using inline formatting (not the style sheet).
    I created a new project to see what would happen. 
    When I apply my style sheet, then apply the numbered list to text, the text font is correct (10pt), but the number font is wrong (8pt).
    But when I apply the default style sheet to the topic, the number font and text font match.
    How can I get the number and text fonts to match in my style sheet?
    I found a workaround by applying inline formatting to the next (10pt) after selecting the text and clicking the numbered list icon.  Below is the html code.  The numbered steps in red are the ones that are not correct (8 pt).  The code with the correct formatting (after I applied inline formatting) is in blue.
    <body>
    <h1>My Overview</h1>
    <p>example</p>
    <ol type="1">
    <li>first step</li>
    <li>second step</li>
    </ol>
    <ol type="1">
    <li style="font-size: 10pt;">Fixed by applying inline formatting to
      10pt after selecting the numbered list icon</li>
    <li style="font-size: 10pt;">next step</li>
    </ol>
    <p>&#160;</p>
    <?rh-placeholder type="footer" ?>
    </body>
    Thanks.
    Gina
    Message was edited by: ginafromtampa

    Amebr,
    That was helpful.  I'm looking at a topic now, and both the Apply Style list on the Formatting toolbar show (none) when I click a numbered list that I created using the Created a Numbered List or Create a Bulleted List on the toolbar. 
    This is the html code for the correct font (10pt):
    <ol>
    <li class="p">this is the (none) style when I use the numbering button
      on the toolbar (which is inline formatting)</li>
    <li class="p">this is the (none) style when I use the numbering button
      on the toolbar&#160;(which is inline formatting)</li>
    <li class="p">this is the (none) style when I use the numbering button
      on the toolbar&#160;(which is inline formatting)</li>
    </ol>
    Both styles list show the correct custom styles I created for numbered lists, though.  Below is the code (correct font):
    <ol>
    <li class="p-ProcedureSteps"><p class="ProcedureSteps">this is from
      my custom numbered style and looks correct</p></li>
    </ol>
    What's strange is, if I create a list and highlight it, then click the Apply Numbered List button in the toolbar, the numbers and text font size changes to 8 point and my Normal font is 10 pt, and both style lists show (none).  That's what I wanted to figure out in my original post.  I opened up the stylesheet and I don't see where that's applied.  In Flare, you can easily see in a table how the styles are formatted, down to each class.
    This is the code for the incorrect font (8pt):
    <ol type="1">
    <li>why is this 8pt?</li>
    <li>why is this 8pt?</li>
    <li>why is this 8pt?</li>
    </ol>
    Below is a screenshot.
    Maybe someone can figure this out. Thanks!
    Gina

  • Senior  Non-senior Medical Insr Premium (self) is not allowed together

    Hi,
    For an employee, in IT0585 (Section 80 Deduction), I am trying to enter amount in both MEDICAL INSR PREMIUM (NON-SENIOR CTZ), and MEDICAL INSR PREMIUM (SENIOR CITIZEN), but system is giving the above error. Please find below screen for the error:
    Please help to solve the issue.
    Thanks and Regards,
    Bhagayshree

    Hi Bhagyashree,
    Check whether the Configuration is correct for this in table V_T7INIC.
    Regards,
    Mohsin.

  • International Addresses and Phone Numbers

    How do people typically deal with International Addresses and Phone Numbers? Do you use special attributes for these?

    I know how to create attributes, the issue is how to create the right set of attributes that can be used for all given international telephone and addresses?
    I would think there would be some sort of predefined standard for doing this but if you have to create your own custom attributes just to do this, then that's not really a great thing.
    Oracle or the ldap standards people whomever they are should include all the object classes and attributes for International Telephone numbers and addresses so all you need to do is add the objectclass to your users and use them!
    Sorry it just doesn't make sense to have everyone create these...

  • I am very annoyed at the Creative Cloud set up and the non-stop issues and problems

    I am very annoyed at the Creative Cloud set up and the non-stop issues and problems!  I am paying monthly for this service and it is constantly failing in some way!  So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE!  That isn't including the other apps that have had issues!  I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging!  It is costing me more than just this monthly fee!  And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues.  Really Adobe?

    Adobe contact information - http://helpx.adobe.com/contact.html may help

  • What is RID in non clustered index and its use

    Hi All,
    I need help regarding following articles on sql server
    1) what is RID in non clustered index and its use.
    2) What is Physical and virtual address space. Difference in 32 bit vs 64 bit Virtual address space
    Regards
    Rahul

    Next time Please ask single question in a thread you will get better response.
    1. RID is location of heap. When you create Non clustered index on heap and
    lookup happens to get extra records RID is used to locate the records. RID is basically Row ID. This is basic definition for you. Please read
    this Thread for more details
    2. I have not heard of Physical address space. I Know Virtual address space( VAS)
    VAS is simple terms is amount of memory( virtual )  'visible' to a process, a process can be SQL Server process or windows process. It theoretically depends on architecture of Operating System. 32 bit OS will have maximum range of 4 G VAS, it's calculated
    like a process ruining on 32 bit system can address max up to 2^32 locations ( which is equivalent to 4 G). Similarly for 64 bit max VAS will be 2^64 which is theoretically infinite. To make things feasible maximum VAS for 64 bit system is kept to 8 TB. Now
    VAS acts as layer of abstraction an intermediate .Instead of all request directly mapping to physical memory it first maps to VAS and then mapped to physical memory so that it can manage request for memory in more coordinated fashion than allowing process
    to do it ,if not it will  soon cause memory crunch.Any process when created on windows will see virtual memory according to its VAS limit.
    Please read
    This Article for detailed information
    Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
    My Technet Wiki Article
    MVP

  • I have an iPhone 4 which is synced with a non apple laptop and wish to sync it with my new iMac.  I have backed the phone up with the laptop and am not sure how to sync it with the iMac without loosing any contacts, emails or photos from my phone.

    I have an iphone 4 which is currently synced with a non apple laptop and I wish to sync it with my new imac.  I have just backed the phone up on my laptop but am not sure what I need to do now.  I do not want to loose any contacts, emails or photos from my phone when I change sync computers.  Can anyone assist with a step by step guide as to how to achieve this oucome?  Thanks in advance.

    Have you read this?
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
    Switch 101: Migrate your Windows files or system to your Mac
    http://support.apple.com/kb/HT2518

  • I have four devices on one Apple ID, i have separate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.

    I have four devices on one Apple ID, i have seperate emails and phone numbers for each device but when I tried to add one to my iPod, it said that the email was already in use.  I have tried many things and the only guess I have is that either someone else has this email as their iMessage but is fake or it wasn't taken off my old iPod when I reset it.  Any ideas on what to do?

    Thanks but that doesn't give me the information I need.  I am putting an email on my ipod for people to contact me for iMessage and FaceTime but when I put the email in, it gives me an error saying that the email cannot be veirified because it is already in use.  My Apple ID can be varified, just not the email that they will contact me with.

  • HT2623 how do i delete icloud account on my ipad when my apple ID is non active email and i don't know the password and can't reset password without active email

    how do i delete icloud account on my ipad when my apple ID is non active email and i don't know the password and can't reset password without active email

    If the iCloud account you are trying to delete is old ID that was later updated to change it to your current ID, you can go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now, if desired, you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me?

    I see people from different ages at my work and every month I need to count how many people from each age I've seen that month. How can I do to give the entries to numbers in a single cell and make numbers count them for me? The final result would be a spreadsheet telling there were 8 people from 20 to 39 years old, 14 peolple from 40 to 59 and so on...

    jpqcampos wrote:
    This appears to be an 'input form' using 'Radio Buttons' to select the category. Neither of these features are supported in Numbers '09.
    You can input the data on one table and summarize it on a second table, but the input table will continue to hold data for each event.
    And by using the Reorganize button, you can hide all but two rows of that table to approximate the appearance and performance of an input form.
    Here are the two tables, Data on the left and Summary on the right. Notes below.
    The grey-filled columns in both tables are 'working' columns, and may be hidden (as shown in the image below).
    Data table:
    D1 contains the word "TRUE" (in capital letters). (This row is always shown.)
    D2 is empty, or may contain any value except "TRUE" (This row is always hidden under the Reorganize rule.)The rest of Row 2 of this table requires the data shown: a number outside the range to be counted (999), and two checkboxes, both checked.
    D3 (and filled down the rest of column D):   =AND(OR(B2,C2),NOT(OR(B3,C3)))
    The formula returns TRUE only for the first unused row in the table (ie. the first row for which neither checkbox has been checked)
    Summary table:
    Column A contains labels for the age ranges to be counted.
    Column B contains the same information in the form necessary for the formulas in columns C and D. They need a numeric value, and that value must be the largest acceptable value in the range to be counted.
    C2 (and filled right to column D, then both filled down to row 5):
        =COUNTIFS(Data :: $A,"<="&$B,Data :: B,TRUE)-SUM(C$1:C1)
    Two changes from the previous example:
    COUNTIFS is used to separate the Native and Foreign counts as well as the age range to be counted.
    The amount subtracted from each result is the SUM of the earlier results, and includes the text value in the first cell of the column (which is interpreted by SUM as a zero).
    See note below regarding my earlier formula.
    When the greyed columns are hidden and the checkbox in the Reorganize pane is checked, the two tables will appear as shown below:
    Close the reorganize pane, and the 'data entry form' is ready to use.
    To use, enter the age first, then check one of the boxes.
    As soon as one box is checked, the row will be hidden, and the next (unused) row will be shown.
    Regards,
    Barry
    Note regarding formula in my earlier post:
    The earlier formula will give erroneous results as it subtracts only the count directly above it from its count of persons in the age range 0-n.
    In E2 of that table, replace "-E1" with "-SUM(E1:E$1)
    Fill down to E8.
    Ignore the instructions (in that post) following "Fill down to E8."
    B

  • I used the disc and track numbers, but it won't show on my iPod as separate CDs?

    Hi,
    I used the disc and track numbers of get info in iTunes, and I would like to have my CDs separate like if they are 3 CDs on my iPod Classic rather then having a big long list of songs, but after using the disc and track numbers, I still don't see on my iPod which one is CD1, and etc. I took a screenshot of my iTunes. How could I have my CDs separate just like the originals?
    http://imageshack.us/photo/my-images/341/89226837.jpg/
    That's the screenshot.

    See Corrupt iPod classic for tips if the iPod isn't working as expected and contains media that isn't in your active library.
    See Grouping tracks into albums for organizational tips.
    tt2

  • .How do I find out what Version (generation) of Ipod touch I have, as I want to know if I can download IOS 5 onto it? It was a gift so I only know the model and serial numbers but not the type

    Hi, can anyone help me out with this question?
    How can I find out which version of Ipod touch I have. I only have the model and serial numbers as it was a gift, but I would like to download IOS 5 if it is compatible?
    Very frustrated Ipod user, any advice would be much appreciated.
    Lynda.

    I had the same problem because there are so many iPod models.  There is a great article in Wikileaks that explains it all and also has pictures.  I'm confident this answer your question.

  • How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?

    How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
    Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh  f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
    Thank you!

    Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
    Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.

Maybe you are looking for