Non-image files are not copied to the Backup Location

I'm on Aperture 3.0.3... I just noticed that non-image files (e.g., WAV files) are not copied into the Backup Location, although they are copied into the main folder location during an import. Does anyone else see this behavior?

Shawnsat,
Yes you can still stream from the host computer, the knowledge base article that describes this is http://docs.info.apple.com/article.html?artnum=305098. If you are attempting to display Photos on Apple TV, they must be synced to the Apple TV, per knowledge base article http://docs.info.apple.com/article.html?artnum=305139.
Cheers,
John

Similar Messages

Just purchased Nikon D610. tried to import 3 images and got this message: The files are not recognized by the raw format support in Lightroom. How do I fix this frustrating problem. Have been using Lightroom for years also Nikon products without any prior

How do I import images. Have a message that says: The files are not recognized by the raw format suppot in Lightroom. Am using a Mac version 10.9.4. the import is from a new Nikon D610. Am using LR 4.4 Please help Adobe is useless as a support.

Each camera must be supported explicity and your LR version is years older than your camera.
According to Adobe's Camera-support page, you need at least LR 5.3 to work with your D610 NEFs in LR:
Camera Raw plug-in | Supported cameras
If you don't want to upgrade to LR 5, or can't due to your OS being too old, then it might work to use the latest DNG Converter and create DNGs from your NEFs, which should open in LR 4.x. You can find the DNG Converter here: http://www.adobe.com/downloads/updates

Coded UI - Test Results/Out - The binary files are getting copied to the TestResults/Out folder

Hi,
I am using Visual Studio 2013 for developing the Coded UI Automation Scripts.
Whenever I execute a Coded UI Automation Script, the binary files are getting copied to the TestResults/Out folder.
I do not want these binary files to be copied to OUT folder, and I have tried disabling the Deployment option under Test Settings > Deployment, but still the behavior is the same.
Could you please advice, how to disable copying binary files into the Out directory.
Thanks in Advance.
Regards,
Karthick K

Hi Karthick K,
From your description, as far as I know that when we enable Tracing and HtmlLogger for Coded UI Test and then run the coded UI test, we will get the Test Results/Out folder automatically.
So it is default that the Out folder includes some files like codeduitestproject6.dll, CodedUITestProject6.pdb etc, we could not disable copying binary files into the Out directory.
However, there have a replace workaround is I suggest you can disable Tracing and HtmlLogger for Coded UI Test. After you disable the Tracing and HtmlLogger for Coded UI Test, it will not generate the Out folder.
Similarly, it will not get the binary files.
http://blogs.msdn.com/b/visualstudioalm/archive/2012/11/08/enabling-htmllogger-in-coded-ui-test.aspx
If you still want to this feature, I suggest you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You can send your idea there and people can vote. If
you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

file was not copied to the iPod because it cannot be played on this iPod

Hi,
   I'm a complete newb with the first generation iPod Touch. It's my wife's and I don't use it but I wanted to experiement with giving her access to some movies. As an experiment I've encoded 1 chapter of a movie on my Linux box using Handbrake using the iPhone & iPod Touch preset. The file is about 7MB. It plays fine on the Linux box. I've copied it over to my Windows machine, have my wife's iPod Touch hooked up and it's visible in iTunes. I select the video directory for the iPod in iTunes and then try dragging the video file into iTunes. At this point I'm presented the message:
<file> was not copied to the iPod <iPod name> because it cannot be played on this iPod.
   In searching the forums it seems that one potential solution is to choose Advanced->Create iPod or iPhone version which unfortunately is grayed out an unselectable. I suspect that this is because I don't have the video file inside of iTunes, but I'm not sure about that.
   When I choose Library->Movies I just get a few options about renting and downloading that take me to the iTunes store.
   How do I get this video into iTunes so that I can try to get it onto the iPod?
Thanks,
Mark

As a follow-up I talked to my son who has an iPod and he tells me that, assuming I understood him correctly, when I open iTunes and choose Library->Movies I should see something like a file browser, and that when I drag the video from my desktop into iTunes I should see it there in the browser.
I currently am not seeing anything that looks like a file browser, but something more like an adversitisement for capabilities of iTunes and the iTunes store. I've got a green shopping bag that has some text to the right saying 'Download movies' and to the right of that some green tickets to the right with text that says 'Rent movies'.
I understand that I want to use the iTunes converter in the advanced menu, but I haven't figured out how to use that on a random file like the m4v file on my desktop.
Thanks

Error: JAR-Ressources in JNLP-File are not signed from the same Certificate

I have two handfull jars, all signed in batch with the same
Certificate. When i start my App with Webstart it tells me:
Your JAR-Ressources in JNLP-File are not signed from the same Certificate.
"JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiert"
Well im shure that i signed all my jars with the same Certificate.
What can i do to solve this problem ???

I get the same error.
Strangely exactly every second time it works and every second time I execute the JNLP I get the following error:
network: Cache-Eintrag nicht gefunden [url: http://localhost:8080/fibo/lib/js_15R41.jar, Version: null]
network: Verbindung von socket://127.0.0.1:3621 mit Proxy=DIRECT wird hergestellt
#### Java Web Start Error:
#### JAR-Ressourcen in JNLP-Datei sind nicht von demselben Zertifikat signiertCan this have something to do with browser caching? So that every 2nd time it tries to access the cache, fails. And than ignores the cache and works?
Any ideas?
Cheers,
Rio

Im running lightroom 4 and just purchased the Sony A7 and using its sd card. when I tried to load the photos, I got a message "the files are not recognized by the raw format support in lightroom"

Tried loading my raw files shot w my new Sony a7 and its sd card into lightroom4. Got a message: "The files are not recognized by the raw format in lightroom"
Does Lightroom 4 not work with the Sony A7?
Thanks,

Lightroom 4 cannot read the RAW photos from a Sony A7
You would have to download and install the FREE Adobe DNG Converter version 8.5 and then convert your RAW to DNG, and then import the DNGs into Lightroom 4
You could also purchase Lightroom 5.5, which will have the capability to read the RAWs directly.

Canon 7D Mark II error "Files are not recognized by the raw format support in Light (149)"?

Has anyone tried to load raw files from a Canon 7D Mark II I get an error "Files are not recognized by the raw format support in Light (149)"?

Based on previous experience, I expect the final versions of LR, ACR and DNGC to be released simultaneously. We have so far seen Release Candidates of ACR and DNGC but not LR.
Unless there needs to be a second ACR/DNGC Release Candidate which happens once every few years for special circumstances, which I don't see any of at the moment.

File is not picking from the source location.

Hi all,
File is not picking from the source location. FTP is working properly and file is also placed in source location. I am new the XI, if anybody can give me the solution it would be really helpfull.
Thanks to all.
Korean

Hi Majin,
Check the folder path properly, check the file name( file name is case sensitive) you have given correct or not. See that your communication channel is active. Also check the cache status and check adapter status also by that you will come to know wht is the problem.
Thanks,
Ranjeeth.

I keep getting the message that my image files are not recognizable because of the codec. They are

I can't save andthen retrieve my filem. I get the messag ethat the files are not in the correct codec~ They are AVI and I don't get why they are rejected.
I have worked with a laptop and a desktop, saving the files to an external hard drive so I can work within both PC systems, but I still am gettting the worng code message.
Help~

AVI is not a format in its own right. It is a container for video clips. Those clips may be one of very many formats. Follow this trouble shooting article and remember to post the GSpot screen capture here.
PrE Hanging, or Crashing - Some Tips
Cheers,
Neale
Insanity is hereditary, you get it from your children

BPM : Files are not appended in the container operation step

Hi Guys,
I am using the BPM pattern, "BpmPatternCollectTime" provided by the SAP under SAP BASIS 6.4 for the N:1 transformation.
In the the Message mapping and Interface mapping source structure has "0 to unbounded" occurance and Target has 1 coourances.. I have given the Time as 5 Minutes to collect the messages...
I dont know why the files are not being appened? Each time am getting the only one file's content as output other files contents(records) are not being merged.
Is there anything wrong in the given BPM pattern? or i need to do any changes in the container operation step ?
can anybody explain why the messages are not appending into a single file. any help would be really appreciated...
Can anybody guide me , how can i debug the BPM?
Thanks and Regards
Venkatesh

Hi Raj,
The Source and target structure are the same ie, BpmPatternCollectMessageToBeCollected..
Structure is
    BpmPatternCollectToBeCollected
    ID
    OverallNumber
In SAP BASIS 6.4 , In the message maaping you can find the
"BpmPatternCollectMerge". I am using the same mapping..
The mapping contains the Source field mappings for field element ID and OverallNumber to the same field in the Target.
After selecting Source's occurance for 0 to unbounded , In the mapping the tool itself is adding two extra nodes as below...
Messages
Message1
    BpmPatternCollectToBeCollected
    ID
    OverallNumber
Mapping is
Source Structure ->Target Structure
Messages (1)                  Messages (1)
Message1 (1)                  Message1 (1)
BpmPatternCollectToBeCollected (0-unbound) BpmPatternCollectToBeCollected (1)
    ID (1)-------> ID (1)
    OverallNumber    (1)-------> OverallNumber
The line indicates above the mapped fields...ID and OverallNumber is only mapped above.
Regards
Venkatesh

EML files are not opened in the browser

EML files opened from a SharePoint 2010 document libraries are not opened in the browser. Instead, a dialog box is opened and prompts to save the file.
Since there's no standard application that knows how to handle EML files, and since the EML format is built into SP (send emails to document libraries), I think this behavior is unacceptable.
EML files should be opened in the browser, similar to SP 2007.

Seems the solution is in the client side configuration.
If eml files (as all other file types) are not configured to open by default in Outlook 2007 (or Windows Live Mail), they will be prompted for download or open.
The registry change link I provided earlier did not work for me. I tried this:
http://webcache.googleusercontent.com/search?q=cache:-hgG6T55trAJ:john-h-selnes.spaces.live.com/blog/cns!6C7F16530F119E8D!3092.entry+how+to+configure+sharepoint+to+opem+eml+file+in+outlook+2007%3F&cd=1&hl=en&ct=clnk&gl=us&source=www.google.com and
solved my problem. Seems by default eml file set to MIME message/rfc822 and associated with windows live mail - SharePoint team hates Outlook team, right?
If you do not have such assoication, it opens in browser!
My settings: MOSS 2007, windows 7, outlook 2007.

Serial numbers are not copied to new storage location for 311 mvt type

Hi Guys
I have 10 stock of material A in 001 Storage location ,which all the quantity is serial number managed
I have transfered 10 quantity of Material A to 002 location from 001 location using 311 MIGO
But serial numbers are not copied to 002 location after transfer posting
001 and 002 are both are WM linked and belongs to same plant
Can any body suggest good solution,how it can be done

Hi
1.Check in material master whether serial number management is active in Plant data/stor Tab and serial number profile is assigned
2. Check while doing MIGO once if u enter the material and transfer qty you are getting the serial number tab or not
3. If everything is ok, then after posting the document check the serial number status in IQ09, check the stock type and the storgae location in the serdata tab
Regards
Amuthan M

Where does KN 09 store .mov files when these files were not copied into the KN document?

I saved a 'test' KN document without copying the movie files into the document. The size of the document was less than half the size of the actual movie files themselves, so I figured they were not embedded into the document. I then played the KN slideshow on a different drive that did not contain the actual movie files.
But it played!! How can that be?!
I had created the document leaving the box for copying audio and video unchecked! It was saved as a package. By the way what is a "package" anyway?
Can anyone shed light on this dilemma?
Thank you,
Howard
PS - the reason this is important is that I want to edit my real Keynote document as it gets bigger without the constant spinning color beachball appearing everytime I right clickk or edit. This doc is 9GB already and will get a lot larger. If I can edit without the beachball appearing by saving as a package without embedding the video that would be great!
My other option is just to leave the videos in a separate folder and then click on them at the appropriated moment. That is what the Apple tech support guy told me is what lots of Apple people do when presenting Keynotes in their stores.
Thanks again.

I decided to try double-clicking one of the files in my library, whereupon iTunes told me that it couldn't find the file. I clicked the button to find the file myself, and was pleased when the dialog box opened up in the right folder.
This made sense, as iTunes knew where the file should have been, so offered that folder as a starting point.
I then tried another file (from a different album), and iTunes offered me the same folder as before. This was logical, as most Windows applications remember which folder you last chose. I navigated to the correct folder for this file, chose the file and closed the dialog.
I then tried another file in the second album, and guess what? iTunes offered me the very first folder again! No, it didn't remember my last folder.
So now if I want to tell iTunes where the files are, I have to double-click each of the 100 files that it's lost, then click the button to say I'll find the file, then navigate away from the wrong folder to the one that it should have remembered from the previous time, and then choose the folder.
Harumph
Message was edited by: Moderator

Files are not appended in the container operation step ?

Hi Guys,
I have a BPM scenario where i receive a single file with multiple transactions
1. Receive step receives the file and starts the process
2 Transformation Step - Splits the file into individual transactions
3. Block step --ForEach - Block has the follow 2 steps
        1. Send - Synchronus - sends the request of each individual transaction to a 3rd party system and receives the response.
       2. Container Operation: Appending all the responses into a single file.
    Properties of container operation:
Target: Multiline element (Block level element)
    Operation: Append
    Expression: Single element similar to structure above with out multiline.
4. Send Step: I am writing this file locally to a file and this always shows only the last transaction in case of ParForEachMode and first transaction in the case of ForEach mode.
can anybody explain why the messages are not appending into a single file. any help would be really appreciated
Thanks,
Srini

Hi Liang,
Check to see if the Sync Send step send every reply messages it received to container operation step:
You might need to remove the container operation to see if you receive each individual msgs.
> I have removed the container operation and i am able to see all the individual responses which i basically written to file just to cross check and every thing looks fine.
Another way to go to workflow log (Complete Process with all the steps) to get debug information:
SXMB_MONI -> Click "PE" under outbound queue -> Press "Display WorkFlow Log" button -> Click List with technical details -> Click Show Work item Container
Here you can see the container and XML message used in this process step.
You might have information on how message be processed in this step
> I have checked in the workflow log and workflow shows the container operation only in the case of ParForEach mode and when the block is in the ForEachMode i dont see any container operation step in the workflowlog and even in the ParForEach mode the container operation dosent have any details.
Your Container Element reference to response message should also defined in block level, since the response message only exist inside the block. However, using process level container element should not cause any problem
> I have defined the response messsage at block level in the container and the target i have defined it as multiline element defiend at process level. This multiline element is taken as input in the transformation step at prrocess level.
are there any other alternatives for this process, i dont understand why the container operation is not appending the elments.
any help would be appreciated
Thanks,
srini
Edited by: srinivas kapu on Feb 25, 2008 12:10 PM

Task list timings are not copied to the Productio order

Dear Frndz,
I have created a task list for an item say FGA, where I have mentioned the SETUP Time as 15 Min, MACHINE time as 10 Min and LABOR time as 10 Min.But, when I create a production order for the same item these timing details are getting copied into.Plz give me the reason and solution for this.
Regards,
Srini

Dear Mangal,
AS u said
1.First goto CO02 and enter the prod.order no and click on Read PP Master data and check now
whether are you able to see the values in operation details screen.- YES AM ABLE TO SEE
2.check the routing selection,selection ID,task list type details in OPL8. - i HAVE CHECKED AND IT IS NORMAL
But still it is not working...........I'll give you two more hints to help me out.
1. The production order for the same item with same BOM,same ROUTING and same ORDER TYPE is working fine.
2. The system is using the task list to arrive at the scheduled start time and end time , but only in the operations overveiw tab it is displaying the SETUP duration and PROCESS duration as zero.
Any more ideas mnagal......
Regards,
SRini

Non-image files are not copied to the Backup Location

Similar Messages

Maybe you are looking for